Institut for Mekanik og Produktion

Aarhus Universitets segl

Publications

Sortér efter: Dato | Forfatter | Titel

Li, W., Wu, S., Zhu, J., Zhang, L., Zheng, J., Wang, H., Qiu, Y., Xie, G. & Li, C. (2025). Constitutive modelling of time-dependent polymer matrix composites: Incorporating a visco-hyperelastic model into the micromechanical framework. Composite Structures, 366, Artikel 119220. https://doi.org/10.1016/j.compstruct.2025.119220
Li, W., Negahban, M., Zhang, W., Zhang, L. & Zhu, J. (2025). Network yield and detangling as a tool for modeling back-stress network softening: A thermodynamically consistent model for polycarbonate. International Journal of Engineering Science, 215, Artikel 104322. https://doi.org/10.1016/j.ijengsci.2025.104322
Taffetani, M. & Pezzulla, M. (2025). Nonlinear morphoelastic energy based theory for stimuli responsive elastic shells. ArXiv.
Barvenik, K., Coogan, Z., Librandi, G., Pezzulla, M. & Tubaldi, E. (2024). Tactile Sensing and Grasping Through Thin-Shell Buckling. Advanced Intelligent Systems , 6(9), Artikel 2300855. https://doi.org/10.1002/aisy.202300855
Garg, H., Ledda, P. G., Skov Pedersen, J. & Pezzulla, M. (2024). Passive Viscous Flow Selection via Fluid-Induced Buckling. Physical Review Letters, 133(8), Artikel 084001. https://doi.org/10.1103/PhysRevLett.133.084001
Wang, C., Zhang, B., Cong, Y., Du, X., Chen, S., Visser, L., Ruiz-Moreno, A., Zhang, L., Reggiori, F., Alexander, D. & Groves, M. R. (2024). Small-Molecule Allosteric Inhibitors of Human Aspartate Transcarbamoylase Suppress Proliferation of Bone Osteosarcoma Epithelial Cells. ChemMedChem, 19(13), e202300688. Artikel e202300688. https://doi.org/10.1002/cmdc.202300688
Lin, Y., Pezzulla, M. & M. Reis, P. (2023). Fluid–structure interactions of bristled wings: the trade-off between weight and drag. Journal of the Royal Society Interface, 20(206), Artikel 20230266. https://doi.org/10.1098/rsif.2023.0266
G.Sano, T., Pezzulla, M. & Reis, P. M. (2022). A Kirchhoff-like theory for hard magnetic rods under geometrically nonlinear deformation in three dimensions. Journal of the Mechanics and Physics of Solids, 160, Artikel 104739. https://doi.org/10.1016/j.jmps.2021.104739
Ledda, P. G., Pezzulla, M., Jambon-Puillet, E., Brun, P. T. & Gallaire, F. (2022). Gravity-driven coatings on curved substrates: a differential geometry approach. Journal of Fluid Mechanics, 949, Artikel A38. https://doi.org/10.1017/jfm.2022.758
Leroy-Calatayud, P., Pezzulla, M., Keiser, A., Mulleners, K. & Reis, P. M. (2022). Tapered foils favor traveling-wave kinematics to enhance the performance of flapping propulsion. Physical Review Fluids, 7(7), Artikel 074403. https://doi.org/10.1103/PhysRevFluids.7.074403
Pezzulla, M., Yan, D. & Reis, P. M. (2022). A geometrically exact model for thin magneto-elastic shells. Journal of the Mechanics and Physics of Solids, 166, Artikel 104916. https://doi.org/10.1016/j.jmps.2022.104916
Zhang, Z., Zhang, L., Jasa, J., Negahban, M. & Gazonas, G. (2022). Molecular sources of ratcheting in poly-dispersed polycarbonate. International Journal of Fatigue, 154, Artikel 106567. https://doi.org/10.1016/j.ijfatigue.2021.106567
Zhang, L. & Fleck, N. A. (2021). Molecular dynamics simulations of ultrathin PMMA films. Polymer, 226, Artikel 123748. https://doi.org/10.1016/j.polymer.2021.123748
Pezzulla, M., Strong, E. F., Gallaire, F. & M. Reis, P. (2020). Deformation of porous flexible strip in low and moderate Reynolds number flows. Physical Review Fluids, 5(8), Artikel 084103. https://doi.org/10.1103/PhysRevFluids.5.084103
P. Holmes, D., Lee, J.-H., S. Park, H. & Pezzulla, M. (2020). Nonlinear buckling behavior of a complete spherical shell under uniform external pressure and homogenous natural curvature. Physical Review E, 102(2), Artikel 023003. https://doi.org/10.1103/PhysRevE.102.023003
Yan, D., Pezzulla, M. & M. Reis, P. (2020). Buckling of pressurized spherical shells containing a through-thickness defect. Journal of the Mechanics and Physics of Solids, 138, Artikel 103923. https://doi.org/10.1016/j.jmps.2020.103923
Yan, D., Pezzulla, M., Cruveiller, L., Abbasi, A. & M. Reis, P. (2020). Magneto-active elastic shells with tunable buckling strength. ArXiv. https://arxiv.org/pdf/2012.01163.pdf
Lee, A., Yan, D., Pezzulla, M., P. Holmes, D. & M. Reis, P. (2019). Evolution of critical buckling conditions in imperfect bilayer shells through residual swelling. Soft Matter, 15(30), 6134-6144. https://doi.org/10.1039/C9SM00901A
Pezzulla, M. & M. Reis, P. (2019). A Weak Form Implementation of Nonlinear Axisymmetric Shell Equations With Examples. Journal of Applied Mechanics, 86(12), Artikel JAM-19-1437. https://doi.org/10.1115/1.4044816
Pezzulla, M., Gallaire, F. & Reis, P. (2019). Fluid-Structure Interactions in Bristled Insect Wings. Poster-session præsenteret på 72nd Annual Meeting of the APS Division of Fluid Dynamics, Seattle, Washington, USA. http://meetings.aps.org/Meeting/DFD19/Session/L27.1
Stein-Montalvo, L., Costa, P., Pezzulla, M. & P. Holmes, D. (2019). Buckling of geometrically confined shells. Soft Matter, 15(6), 1215-1222. https://doi.org/10.1039/C8SM02035C
Strong, E. F., Pezzulla, M., Gallaire, F. & Siconolfi, L. (2019). Hydrodynamic loading of perforated disks in creeping flows. Physical Review Fluids, 4(8), Artikel 084101. https://doi.org/10.1103/PhysRevFluids.4.084101
Jiang, X., Pezzulla, M., H. Shao, H. S., Ghosh, T. K. & P. Holmes, D. (2018). Snapping of bistable, prestressed cylindrical shells. EPL, 122(6), Artikel 64003. https://doi.org/10.1209/0295-5075/122/64003
Pezzulla, M., Stoop, N., P. Steranka, M. P., Bade, A. & P. Holmes, D. (2018). Curvature-Induced Instabilities of Shells. Physical Review Letters, 120(4), Artikel 048002. https://doi.org/10.1103/PhysRevLett.120.048002
Pezzulla, M., Strong, E., Karimi, H. & Reis, P. (2018). Deformation of perforated elastic sheets due to the hydrodynamic loading by a viscous fluid. Poster-session præsenteret på APS March Meeting 2018, Los Angeles, California, USA. https://ui.adsabs.harvard.edu/abs/2018APS..MARE53012P/abstract
Pezzulla, M., Siconolfi, L., Gallaire, F. & Reis, P. (2018). To Leak or not to Leak through Holey Sheets. Poster-session præsenteret på 71st Annual Meeting of the APS Division of Fluid Dynamics, Atlanta, Georgia, USA. http://meetings.aps.org/Meeting/DFD18/Session/A04.6
Yan, D., Lee, A., Pezzulla, M., Lopez Jiminez, F., Marthelot, J., Holmes, D. & Reis, P. (2018). For Better or For Worse: Self-tuning of the buckling strength of active bilayer shells. Poster-session præsenteret på APS March Meeting 2018, Los Angeles, California, USA. https://ui.adsabs.harvard.edu/abs/2018APS..MARC48009Y/abstract
Pezzulla, M., Stoop, N., Jiang, X. & P. Holmes, D. (2017). Curvature-driven morphing of non-Euclidean shells. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 473(2201), Artikel 20170087. https://doi.org/10.1098/rspa.2017.0087
Pezzulla, M., Stoop, N., Steranka, M., Bade, A., Trejo, M. & P. Holmes, D. (2017). Global Curvature Buckling and Snapping of Spherical Shells. Poster-session præsenteret på APS March Meeting 2017, New Orleans, Louisiana, USA. https://ui.adsabs.harvard.edu/abs/2017APS..MARC15011P/abstract
Pezzulla, M., P. Smith, G., Nardinocchi, P. & P. Holmes, D. (2016). Geometry and Mechanics of Thin growing Bilayers. Soft Matter, 12(19), 4435-4442. https://doi.org/10.1039/C6SM00246C
Nardinocchi, P., Pezzulla, M. & Teresi, L. (2015). Anisotropic swelling of thin gel films. Soft Matter, 11(8), 1492-1499. https://doi.org/10.1039/C4SM02485K
Nardinocchi, P., Pezzulla, M. & Teresi, L. (2015). Anisotropic swelling of thin gel sheets. Soft Matter, 11(8), 1492-1499. https://doi.org/10.1039/C4SM02485K
Nardinocchi, P., Pezzulla, M. & Teresi, L. (2015). Mechanics of Bio–hybrid Systems. Procedia IUTAM, 12, 145-153. https://doi.org/10.1016/j.piutam.2014.12.016
Nardinocchi, P., Pezzulla, M. & Teresi, L. (2015). Steady and transient analysis of anisotropic swelling in fibered gels. Journal of Applied Physics, 118(24), Artikel 244904. https://doi.org/10.1063/1.4938737
Pezzulla, M., A. Shillig, S., Nardinocchi, P. & P. Holmes, D. (2015). Morphing of geometric composites via residual swelling. Soft Matter, 11(29), 5812-5820. https://doi.org/10.1039/C5SM00863H
Lucantonio, A., Nardinocchi, P., Pezzulla, M. & Teresi, L. (2014). Multiphysics of bio-hybrid systems: shape control and electro-induced motion. Smart Materials and Structures, 23(4), Artikel 045043 . https://doi.org/10.1088/0964-1726/23/4/045043
Lucantonio, A., Nardinocchi, P. & Pezzulla, M. (2014). Swelling-induced and controlled curving in layered gel beams. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 470(2171), Artikel 20140467. https://doi.org/10.1098/rspa.2014.0467
Nardinocchi, P., Pezzulla, M., J. Akle, B., Guenther, M. & Wallmersperger, T. (2014). Actuation and buckling effects in IPMCs. I Proceedings Volume 9056, Electroactive Polymer Actuators and Devices (EAPAD) 2014 (Bind 9056) https://doi.org/10.1117/12.2044470
Nardinocchi, P. & Pezzulla, M. (2013). Curled actuated shapes of ionic polymer metal composites strips. Journal of Applied Physics, 113(22). https://doi.org/10.1063/1.4810919
Su Cha, Y., Nardinocchi, P., Pezzulla, M. & Porfiri, M. (2013). Giant displacement in IPMC–based structures: a preliminary study. I E. Carrera, M. Cinefra, F. Miglioretti & M. Petrolo (red.), Advanced Materials Research (Bind 745, s. 119-128) https://doi.org/10.4028/www.scientific.net/AMR.745.119
Zhang, L. (2013). Propagation of thermo-mechanical waves in deforming nonlinear viscoelastic bodies.
Nardinocchi, P., Pezzulla, M. & Placidi, L. (2011). Thermodynamically based multiphysic modeling of ionic polymer metal composites. Journal of Intelligent Material Systems and Structures, 22(16), 1887-1897. https://doi.org/10.1177/1045389X11417195
Revideret 13.11.2025
-
Matteo Pezzulla