Institut for Mekanik og Produktion

Aarhus Universitets segl

Publications by Mechanics and Materials

Are you looking for publications by Mechanics and Materials? On this page you can find all the publications made by the Mechanics and Materials - Department of Mechanical and Production Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sortér efter: Dato | Forfatter | Titel

Zhu, J., He, T. & Aghababaei, R. (2026). Grain boundary inclination effects on scratch response in crystalline copper. International Journal of Mechanical Sciences, 310, Artikel 111143. https://doi.org/10.1016/j.ijmecsci.2025.111143
Paggetti, F., Gherardini, M., Lucantonio, A. & Cipriani, C. (2025). Optimizing the Myokinetic Interface: A Finite Element Model to Predict Displacement in Amputated Muscles. I 2025 International Conference on Rehabilitation Robotics, ICORR 2025 (s. 376-381). IEEE Computer Society Press. https://doi.org/10.1109/ICORR66766.2025.11063137
Mirian, M. H., Silani, M., Akbarzadeh, S. & Aghababaei, R. (2026). Multi-objective optimization of AlCrN coated carbide cutting tools for stress and temperature reduction. Journal of Manufacturing Processes, 158, 205-217. https://doi.org/10.1016/j.jmapro.2025.12.062
Pastewka, L., Vakis, A. I., Eder, S. J., Aghababaei, R., Almqvist, A., Carbone, G., Chandross, M., Dini, D., Ehrich, H. J., Ewen, J. P., Menga, N., Molinari, J. F., Moras, G., Nicola, L., Paggi, M., Putignano, C., Scaraggi, M., Yastrebov, V. A. & Müser, M. H. (2026). Modeling in tribology: Recent advances, applications, and open questions. Tribology International, 218, Artikel 111326. https://doi.org/10.1016/j.triboint.2025.111326
Fulco, S., Budzik, M. K. & Turner, K. (2026). Tailoring toughness and adhesion through architected interfaces. npj Metamaterials, 2, 1-10. Artikel 5. https://doi.org/10.1038/s44455-025-00014-5
Manti, S. (2025). Model Discovery via Symbolic Regression with Applications to Fluid Transport Problems. [Ph.d.-afhandling, Aarhus Universitet].
De Cunto, L. O., Sadik, S. & Kirkegaard, P. H. (2024). Surrogate modeling of springback in thermoformed foam cores. Poster-session præsenteret på The 19th European Mechanics of Materials Conferences (EMMC), Madrid, Spanien.
Pimentel de Figueiredo, R. (2025). Knowledge-Guided Symbolic Regression for Interpretable Camera Calibration. Journal of Imaging, 11(11), Artikel 389. https://doi.org/10.3390/jimaging11110389
Ledda, P. G., Garg, H., Østergaard-Clausen, V., Rudzki, L. K., Madary, A. & Pezzulla, M. (2025). Fluid-induced snap-through instability of spherical shells. Physical Review Letters, 135, Artikel 234002. https://doi.org/10.1103/ltqy-d53p
Taffetani, M. & Pezzulla, M. (2025). Nonlinear morphoelastic energy based theory for stimuli responsive elastic shells. ArXiv.
Kristiansen, M. F., Rasmussen, S. & Mikkelsen, L. P. (2025). Transforming load-controlled fatigue test data into a strain-based SN-curve: Results for unidirectional non-crimp glass fiber/epoxy composites tested in tension-tension. IOP Conference Series: Materials Science and Engineering, 1338(1), Artikel 012018. https://doi.org/10.1088/1757-899X/1338/1/012018
Manti, S., Mohammadian, S., Treiber, M. & Lucantonio, A. (2025). SR-Traffic: Discovering Macroscopic Traffic Flow Models with Symbolic Regression. 1-7. https://ml4physicalsciences.github.io/2025/files/NeurIPS_ML4PS_2025_105.pdf
Paggi, M. & Aghababaei, R. (2025). Preface: Contact Mechanics and Tribology in the ICTAM Century. International Journal of Solids and Structures, 323, Artikel 113642. https://doi.org/10.1016/j.ijsolstr.2025.113642
Pimentel de Figueiredo, R., Limberg, C., Jamone, L. & Bernardino, A. (2025). Editorial: Computer vision mechanisms for resource-constrained robotics applications. Frontiers in Robotics and AI, 12, Artikel 1680098. https://doi.org/10.3389/frobt.2025.1680098
Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Particle Flow and Printing Path Effects in SLS. Abstract fra EPF European Polymer Congress, Groningen, Holland.
Ostrowski, H., Sandberg, M. & Budzik, M. K. (2025). Novel fracture mechanics tests for thin 3D printed materials. Abstract fra EPF European Polymer Congress, Groningen, Holland.
Taylor, A. P., Vankayalapati, G. S., Budzik, M. K. & Turner, K. T. (2025). Hinged Rigid Beam Fracture Specimen for Characterization of Lattice and Thin-Sheet Materials. Experimental Mechanics, 65(9), 1375–1386. https://doi.org/10.1007/s11340-025-01214-w
Spangsberg, E., Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Multiscale Modelling of Heat Transfer in Selective Laser Sintering. engrXiv. https://doi.org/10.31224/4704
Kristensen, C. K., Kirkegaard, J., Sanporean, C.-G., Budzik, M. K. & Sandberg, M. (2025). Mitigating Discoloration in PA11 SLS: Experimental DoE and Novel Simulation Approaches.
Manti, S., Tsai, P.-H., Lucantonio, A. & Iliescu, T. (2025). Symbolic regression of data-driven reduced order model closures for under-resolved, convection-dominated flows. Journal of Computational Physics, 540, Artikel 114298. https://doi.org/10.1016/j.jcp.2025.114298
Langthjem, M. A. (2025). Asymptotic approximations and stability of a propagating bucklewave. Zeitschrift fuer Angewandte Mathematik und Physik, 76(5), Artikel 193. https://doi.org/10.1007/s00033-025-02568-w
Langthjem, M. A. & Jensen, H. M. (2025). Erratum to: On matched asymptotic expansion solutions of a bucklewave propagation problem (ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, (2024), 104, 5, 10.1002/zamm.202300655). Zeitschrift fuer Angewandte Mathematik und Mechanik, 105(5), Artikel e70095. https://doi.org/10.1002/zamm.70095
Bardella, L. & Jensen, H. M. (2025). Preface: Thematic session SM12 on Plasticity, Viscoplasticity and Creep of the 26th International Congress of Theoretical and Applied Mechanics (ICTAM2024). International Journal of Solids and Structures, 322, Artikel 113624. https://doi.org/10.1016/j.ijsolstr.2025.113624
Sadik, S. & Yavari, A. (2025). A generalized Coleman-Noll procedure and the balance laws of hyper-anelasticity. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 481(2320), Artikel 20250076. https://doi.org/10.1098/rspa.2025.0076
Nazari, R., Aghababaei, R., Papangelo, A. & Ciavarella, M. (2025). Adhesion- and friction-induced suppression of buckling in thin spherical shells in contact with a rigid wall. International Journal of Engineering Science, 215, Artikel 104329. https://doi.org/10.1016/j.ijengsci.2025.104329
Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Efficient continuum-based modelling and analysis of polymer SLS: Insights into particle sintering and densification in straight and corner scanning passes. Additive Manufacturing, 109, Artikel 104828. https://doi.org/10.1016/j.addma.2025.104828
Li, W., Negahban, M., Zhang, W., Zhang, L. & Zhu, J. (2025). Network yield and detangling as a tool for modeling back-stress network softening: A thermodynamically consistent model for polycarbonate. International Journal of Engineering Science, 215, Artikel 104322. https://doi.org/10.1016/j.ijengsci.2025.104322
Jensen, J. S. K. (2024). Investigation of three-body abrasive sand wear in submersible pumps. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus University.
Ma, L. (2024). Atomic insights into the abrasive wear mechanisms of mono- and multi-layer coatings at the single asperity level. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus University.
Movassagh-Alanagh, F., Abdollah-Zadeh, A. & Aghababaei, R. (2025). Effects of B and C elements on microstructure, mechanical and tribological properties of TiN coating deposited by PACVD. Materials Characterization, 225, Artikel 115178. https://doi.org/10.1016/j.matchar.2025.115178
E.F. Athanasiadis, A., Duncan, O., Budzik, M. K. & Dias, M. A. (2025). Toughness of Confined Auxetic Foams. Advanced Engineering Materials, 27(17), Artikel 2500626. https://doi.org/10.1002/adem.202500626
Li, W., Wu, S., Zhu, J., Zhang, L., Zheng, J., Wang, H., Qiu, Y., Xie, G. & Li, C. (2025). Constitutive modelling of time-dependent polymer matrix composites: Incorporating a visco-hyperelastic model into the micromechanical framework. Composite Structures, 366, Artikel 119220. https://doi.org/10.1016/j.compstruct.2025.119220
Jensen, J. S. K., Esmizadeh, S., Lund, M., Juhl, J., Nemati, N. & Aghababaei, R. (2025). Evaluating the effect of particle roundness on three-body wear between polymers and metals. Wear, 570, Artikel 206000. https://doi.org/10.1016/j.wear.2025.206000
Calafà, M., Jensen, H. M. & Andriollo, T. (2025). Solving plane crack problems via enriched holomorphic neural networks. Engineering Fracture Mechanics, 322, Artikel 111133. https://doi.org/10.1016/j.engfracmech.2025.111133
Hu, P., Li, S. & Budzik, M. K. (2025). Decoupling fracture energy from crack area via surface patterning. Surfaces and Interfaces, 62, Artikel 106066. https://doi.org/10.1016/j.surfin.2025.106066
Darabi, R., Oliveira, J. P., Nemati, N., Reis, A. & de Sá, J. C. (2025). Benchmarking advanced multiphase field modeling of Inconel 625 in additive manufacturing: Correlating powder bed fusion with dendrite growth and crack formation. Materialia, 40, Artikel 102384. https://doi.org/10.1016/j.mtla.2025.102384
Luo, X., Andriollo, T., Baxevanakis, K. P. & Silberschmidt, V. V. (2025). Microstructural effect on fracture evolution in spheroidal graphite iron: Numerical analysis. Engineering Failure Analysis, 174, Artikel 109459. https://doi.org/10.1016/j.engfailanal.2025.109459
Shojaeifard, M., Ferraresso, M., Lucantonio, A. & Bacca, M. (2025). Machine learning-based optimal design of fibrillar adhesives. Journal of the Royal Society Interface, 22(223), Artikel 20240636. https://doi.org/10.1098/rsif.2024.0636
Truong, T. T., Airao, J., Fattahi, S., Azarhoushang, B., Karras, P. & Aghababaei, R. (2025). Image-based machine learning model for tool wear estimation in milling Inconel 718. Wear, 571, Artikel 205865. https://doi.org/10.1016/j.wear.2025.205865
Fulco, S., Budzik, M. K., Xiao, H., Durian, D. J. & Turner, K. T. (2025). Disorder enhances the fracture toughness of 2D mechanical metamaterials. PNAS Nexus, 4(2), Artikel pgaf023. https://doi.org/10.1093/pnasnexus/pgaf023
Niknafs, S., Silani, M., Concli, F. & Aghababaei, R. (2025). Numerical analysis of fatigue crack propagation using a coarse-grained molecular dynamics approach. International Journal of Solids and Structures, 311, Artikel 113245. https://doi.org/10.1016/j.ijsolstr.2025.113245
Malekan, M., Madsen, K. L., Airao, J., Ilvig, C. F. & Aghababaei, R. (2025). Numerical assessment of tool geometry for improving productivity in milling stainless steel 316 L. International Journal of Advanced Manufacturing Technology, 136(7), 3451-3463. Artikel 109782. https://doi.org/10.1007/s00170-025-15061-5
Islam, R., Madsen, S. P. & Christensen, M. (2025). Enhancing magnetocrystalline anisotropy in W-type SrFe18O27 hexaferrite via tailored substitutions. Acta Materialia, 288, 120828. Artikel 120828. https://doi.org/10.1016/j.actamat.2025.120828
van Innis, C., Budzik, M. K. & Pardoen, T. (2025). Bridging in co-cured composite joints. International Journal of Solids and Structures, 309, Artikel 113194. https://doi.org/10.1016/j.ijsolstr.2024.113194
Airao, J., Malekan, M., Budzik, M. & Aghababaei, R. (2024). Effect of Friction on Critical Cutting Depth for Ductile-Brittle Transition in Material Removal Mechanism. Journal of Tribology, 146(11), Artikel 114201 EN. https://doi.org/10.1115/1.4066052
Lubineau, G., Alfano, M., Tao, R., Wagih, A., Yudhanto, A., Li, X., Almuhammadi, K., Hashem, M., Hu, P., Mahmoud, H. A. & Oz, F. (2024). Harnessing Extrinsic Dissipation to Enhance the Toughness of Composites and Composite Joints: A State-of-the-Art Review of Recent Advances. Advanced Materials, 36(51), Artikel 2407132. https://doi.org/10.1002/adma.202407132
Hund, J., Kouznetsova, V. & Andriollo, T. (2025). Efficient prediction of strength and strain localisation in porous solids via microstructure-based limit analysis. Mechanics of Materials, 201, Artikel 105208. https://doi.org/10.1016/j.mechmat.2024.105208
Airao, J., Gupta, A., Nirala, C. K. & Hsue, A. W. J. (2024). Bayesian neural networks modeling for tool wear prediction in milling Al 6061 T6 under MQL conditions. International Journal of Advanced Manufacturing Technology, 135(5-6), 2777-2788. https://doi.org/10.1007/s00170-024-14678-2
Calafà, M. (2024). Characterization of the angular coefficient method on 2D and 3D piecewise smooth boundaries. Computational and Applied Mathematics, 43(8), Artikel 450. https://doi.org/10.1007/s40314-024-02969-z
Bae, J., Won, J., Kim, T., Choi, S., Kim, H., Oh, S. H. V., Lee, G., Lee, E., Jeon, S., Kim, M., Do, H. W., Seo, D., Kim, S., Cho, Y., Kang, H., Kim, B., Choi, H., Han, J., Kim, T. ... Shim, W. (2024). Cation-eutaxy-enabled III–V-derived van der Waals crystals as memristive semiconductors. Nature Materials, 23(10), 1402-1410. https://doi.org/10.1038/s41563-024-01986-x

Viser resultater 1 til 50 ud af 126

1

2

3

Næste

Revideret 13.11.2025
-
AU Engineering