Publications

Sortér efter: Dato | Forfatter | Titel

Pantleon, K., Jensen, H. M. & Somers, M. A. J. (2004). X-ray diffraction studies of free-standing electrodeposited Cu-patterns. Advanced Engineering Materials, 6(10), 828-832. https://doi.org/10.1002/adem.200400089

Veluri, B., Santos-Martin, D. & Jensen, H. M. (2011). Voltage sag influence on fatigue life of the drivetrain of fixed speed wind turbines. ARPN Journal of Engineering and Applied Sciences, 6(3).

Sørensen, K. D., Mikkelsen, L. P., Jensen, H. M. & Sørensen, K. D. (2009). User subroutine for compressive failure of composites. Afhandling præsenteret på Simulia Conference 2009, London, Storbritannien.

Madsen, N. D., Steffensen, S., Jensen, H. M. & Bøttiger, J. (2015). Toughness measurement of thin films based on circumferential cracks induced at conical indentation. International Journal of Fracture, 193(2), 117-130. https://doi.org/10.1007/s10704-015-0022-5, https://doi.org/10.1007/s10704-015-0022-5

Jensen, H. M. (2002). Three-dimensional numerical investigation of brittle bond fracture. International Journal of Fracture, 114(2), 153-165. https://doi.org/10.1023/A:1015066711279

Skovsgård, S. P. H. & Jensen, H. M. (2018). Three-dimensional constitutive model for elastic-plastic behaviour of fibre-reinforced composites. International Journal of Solids and Structures, 139-140, 150-162. https://doi.org/10.1016/j.ijsolstr.2018.01.032

Clausen, J., Jensen, H. M. & Sørensen, K. D. (2008). Thin film delamination at corners. I J. P. Denier, M. Finn & T. Mattner (red.), Abstracts book : XXII International Congress of Theoretical and Applied Mechanics, ICTAM 2008 Adelaide (s. 274)

Jensen, H. M. (2010). The J₂ flow theory.

Thouless, M. D. & Jensen, H. M. (1994). The effect of residual stresses on adhesion measurements. Journal of Adhesion Science and Technology, 8(6), 579-586. https://doi.org/10.1163/156856194X00357

Jensen, H. M. (2010). The CST element derived using the principle of virtual work.

Jensen, H. M. (2010). The compatibility equations.

Moon, M. W., Jensen, H. M., Hutchinson, J. W., Oh, K. H. & Evans, A. G. (2002). The characterization of telephone cord buckling of compressed thin films on substrates. Journal of the Mechanics and Physics of Solids, 50(11), 2355-2377. https://doi.org/10.1016/S0022-5096(02)00034-0

Jensen, H. M. (1991). The blister test for interface toughness measurement. Engineering Fracture Mechanics, 40(3), 475-486. https://doi.org/10.1016/0013-7944(91)90144-P

Jensen, H. M., Steffensen, S. & Lynge, R. (2013). Tensile Cracking in Particle Reinforced Coatings. Abstract fra ASME: IMECE2013, San Diego, USA.

Jensen, H. M. (2010). Voigt and Reuss models, bounds on moduli and compliances.

Jensen, H. M. (2010). The stress state and equilibrium.

Jensen, H. M. (2010). The strain state.

Jensen, H. M. (2010). Stress concentration at circular holes.

Jensen, H. M. (2010). Representative volume elements, unit cells and definitions of macroscopic stresses and strains.

Jensen, H. M. (2010). Principle of virtual work, uniaxial loading.

Jensen, H. M. (2010). Principle of virtual work, simple beams.

Jensen, H. M. (2010). Principle of virtual work, elastic energy.

Jensen, H. M. (2010). Introduction to index notation and tensor analysis.

Jensen, H. M. (2010). Dilute and self-consistent calculations of elastic moduli of materials with cavities.

Jensen, H. M. (2010). Constitutive equations, Hooke's generalised law.

Jensen, H. M. & Sheinman, I. (2001). Straight-sided, buckling-driven delamination of thin films at high stress levels. International Journal of Fracture, 110(4), 371-385. https://doi.org/10.1023/A:1010821918325

Veluri, B. & Jensen, H. M. (2013). Steady-state propagation of interface corner crack. International Journal of Solids and Structures, 50(10), 1613-1620. https://doi.org/10.1016/j.ijsolstr.2013.01.022

Skovsgård, S. P. H. & Jensen, H. M. (2018). Steady-State Kink Band Propagation in Layered Materials. Journal of Applied Mechanics, 85(6), 061005-1 - 061005-11. Artikel JAM-18-1046. https://doi.org/10.1115/1.4039573

Calafà, M., Jensen, H. M. & Andriollo, T. (2025). Solving plane crack problems via enriched holomorphic neural networks. Engineering Fracture Mechanics, 322, Artikel 111133. https://doi.org/10.1016/j.engfracmech.2025.111133

Veluri, B., Santos-Martin, D. & Jensen, H. M. (2012). Simulation of Voltage Dip Event in Fixed-Speed Wind Turbines: Fatigue Evaluation. Engineering Mechanics, 19(2/3), 143-154.

Veluri, B. & Jensen, H. M. (2011). Simulation of Post Failure Response in Fiber Composites. I B. Cox (red.), Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition: IMECE2011 http://www.asmeconferences.org/congress2011/

Veluri, B. & Jensen, H. M. (2010). Simulation of Kinkband Formation in Fiber Composites. I A. Eriksson & G. Tibert (red.), Proceedings of NSCM 23: the 23rd Nordic Seminar on Computational Mechanics (s. 194-197). http://congress.cimne.upc.es/nscm-23/frontal/doc/proceedings.pdf

Veluri, B. & Jensen, H. M. (2012). Simulation of Interfacial Corner Cracks in Bimaterial Systems. I Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition: IMECE2012

Jensen, H. M. & Veluri, B. (2014). Simulation of crack paths at three-dimensional corners of laminated structures. International Journal of Materials Engineering Innovation, 5(2), 112-121.

Veluri, B. & Jensen, H. M. (2011). Simulation of Compressive Failure in Fiber Composites. Abstract fra ASME 2011 Applied Mechanics and Materials Conference, Chicago, Illinois, USA. http://www.asmeconferences.org/mcmat2011/

Jensen, H. M. (2002). Residual stress effects on the compressive strength of unidirectional fibre composites. Acta Materialia, 50(11), 2895-2904. https://doi.org/10.1016/S1359-6454(02)00114-3

Jensen, H. M. (2024). Propagating instabilities in solids. I ICTAM2024: Abstract Book (s. 48-51). International Congress of Theoretical and Applied Mechanics.

Langthjem, M. A. & Jensen, H. M. (2022). Propagating buckles in undersea pipelines – A model problem. International Journal of Solids and Structures, 257, Artikel 111555. https://doi.org/10.1016/j.ijsolstr.2022.111555

Bardella, L. & Jensen, H. M. (2025). Preface: Thematic session SM12 on Plasticity, Viscoplasticity and Creep of the 26th International Congress of Theoretical and Applied Mechanics (ICTAM2024). International Journal of Solids and Structures, 322, Artikel 113624. https://doi.org/10.1016/j.ijsolstr.2025.113624

Pane, I. & Jensen, H. M. (2004). Plane strain bifurcation and its relation to kinkband formation in layered materials. European Journal of Mechanics, A/Solids, 23(3), 359-371. https://doi.org/10.1016/j.euromechsol.2004.01.009

Jensen, H. M. (2010). Plane elasticity, polar coordinates.

Jensen, H. M. (2010). Plane conditions, the Airy stress function.

Budzik, M. K. & Jensen, H. M. (2013). Perturbed Crack Front. I Book of Abstracts of the 2nd international conference on structural adhesive bonding AB 2013 Artikel AB13_47 Faculty of Engineering, University of Porto, Portugal.

Budzik, M. K. & Jensen, H. M. (2014). Perturbation analysis of crack front in simple cantilever plate peeling experiment. International Journal of Adhesion and Adhesives, 53, 29-33. https://doi.org/10.1016/j.ijadhadh.2014.01.014

Jensen, H. M. (2010). Peel test geometry, crack tip analysis, plastic corrections.

Wahlgren, S. S., Jensen, H. M. & Budzik, M. K. (2026). On the transition from arc debonding to tunneling at fiber–matrix interfaces. Composites Part B: Engineering, 318, Artikel 113624. https://doi.org/10.1016/j.compositesb.2026.113624

Langthjem, M. A. & Jensen, H. M. (2024). On matched asymptotic expansion solutions of a bucklewave propagation problem. Zeitschrift fuer Angewandte Mathematik und Mechanik, 104(5), 1. Artikel e202300655. https://doi.org/10.1002/zamm.202300655

Gebhardt, C., Veluri, B., Preidikman, S., Jensen, H. M. & Massa, J. (2010). Numerical Simulations of the Aeroelastic Behavior of Large Horizontal-Axis Wind Turbines: The Drivetrain Case. Mecánica Computacional, XXIX(10). http://www.cimec.org.ar/ojs/index.php/mc/article/view/3068

Hansen, C., Bay, D., Jensen, M. R., Gervang, B., Jensen, H. M., Thrysøe, S. A. & Nygaard, J. V. (2014). Numerical simulation of LDL transport through the carotid arterial wall. Computer Methods in Biomechanics and Biomedical Engineering, 17 (sup1), 20-21. https://doi.org/10.1080/10255842.2014.931074

Veluri, B. & Jensen, H. M. (2011). Numerical implementation of constitutive material law for simulating the kinkband formation in fiber composites. Key Engineering Materials, 488-489 (472), 472-475. https://doi.org/10.4028/www.scientific.net/KEM.488-489.472

Viser resultater 1 til 50 ud af 122

Næste

Revideret 13.11.2025

Henrik Myhre Jensen