Publications

Sort by: Date | Author | Title

Hyldahl, P. C., Budzik, M. K. & Jensen, H. M. (2016). Dynamic Simulation of Energy Release Rate in the Double Cantilever Beam Specimen using the Absolute Nodal Coordinate Formulation. Paper presented at Euradh 2016 Adhesion, Glasgow, United Kingdom.

Hutchinson, J. W. & Jensen, H. M. (1990). Models of fiber debonding and pullout in brittle composites with friction. Mechanics of Materials, 9(2), 139-163. https://doi.org/10.1016/0167-6636(90)90037-G

Hansen, C., Bay, D., Jensen, M. R., Gervang, B., Jensen, H. M., Thrysøe, S. A. & Nygaard, J. V. (2014). Numerical simulation of LDL transport through the carotid arterial wall. Computer Methods in Biomechanics and Biomedical Engineering, 17 (sup1), 20-21. https://doi.org/10.1080/10255842.2014.931074

Gebhardt, C., Preidikman , S., Massa, J. C., Veluri, B. & Jensen, H. M. (2010). Analysis of the Drivetrain Performance of a Large Horizontal-Axis Wind Turbine: An Aeroelastic Approach. In NAFEMS NORDIC Regional Conference 2010: Trends and Future Needs in Engineering Simulation NAFEMS NORDIC Region. http://www.nafems.org/events/nafems/2010/NORDIC2010/

Gebhardt, C., Veluri, B., Preidikman, S., Jensen, H. M. & Massa, J. (2010). Numerical Simulations of the Aeroelastic Behavior of Large Horizontal-Axis Wind Turbines: The Drivetrain Case. Mecánica Computacional, XXIX(10). http://www.cimec.org.ar/ojs/index.php/mc/article/view/3068

Ferguson, O. V., Skovsgaard, S. P. H., Jensen, H. M. & Mikkelsen, L. P. (2023). Compressive strength prediction of carbon fiber-reinforced pultruded profiles including realistic volumetric fiber orientations. European Journal of Mechanics A - Solids, 104( Supplement), Article 105011. https://doi.org/10.1016/j.euromechsol.2023.105011

Feraren, P. & Jensen, H. M. (2004). Cohesive zone modelling of interface fracture near flaws in adhesive joints. Engineering Fracture Mechanics, 71(15), 2125-2142. https://doi.org/10.1016/j.engfracmech.2003.12.003

Clausen, J., Jensen, H. M. & Sørensen, K. D. (2008). Thin film delamination at corners. In J. P. Denier, M. Finn & T. Mattner (Eds.), Abstracts book : XXII International Congress of Theoretical and Applied Mechanics, ICTAM 2008 Adelaide (pp. 274)

Christoffersen, J. & Jensen, H. M. (1996). Kink band analysis accounting for the microstructure of fiber reinforced materials. Mechanics of Materials, 24(4), 305-315. https://doi.org/10.1016/S0167-6636(96)00052-X

Christiansen, N., Todorov, P., Shimizu, K., Budzik, M. K., Hinge, M. & Jensen, H. M. (2014). Evaluation of fracture energy using J-integral in a polymer brush coated steel and polymer interface. Poster session presented at 5th World Congress on Adhesion and Related Phenomena, Nara, Japan.

Calafà, M., Jensen, H. M. & Andriollo, T. (2025). Solving plane crack problems via enriched holomorphic neural networks. Engineering Fracture Mechanics, 322, Article 111133. https://doi.org/10.1016/j.engfracmech.2025.111133

Budzik, M. K. & Jensen, H. M. (2013). Modified Brazilian Disk Test for Interface Fracture Studies. In Book of Abstracts of the 2nd international conference on structural adhesive bonding AB 2013 Article AB13_46 Faculty of Engineering, University of Porto, Portugal.

Budzik, M. K. & Jensen, H. M. (2013). Perturbed Crack Front. In Book of Abstracts of the 2nd international conference on structural adhesive bonding AB 2013 Article AB13_47 Faculty of Engineering, University of Porto, Portugal.

Budzik, M. K. & Jensen, H. M. (2013). A systematized study of structures with heterogeneous interfaces: IMECE2013-62341. Abstract from ASME: IMECE2013, San Diego, United States.

Budzik, M. K. & Jensen, H. M. (2014). Bonded Bimaterial Ring under Compressive Load. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 228(2), 100-108. https://doi.org/10.1177/1464420713512281

Budzik, M. K. & Jensen, H. M. (2014). Perturbation analysis of crack front in simple cantilever plate peeling experiment. International Journal of Adhesion and Adhesives, 53, 29-33. https://doi.org/10.1016/j.ijadhadh.2014.01.014

Budzik, M. K., Jensen, H. M. & Jumel, J. (2015). Fracture in the single cantilever beam test with large scale bridging. Key Engineering Materials, 627, 221-224. https://doi.org/10.4028/www.scientific.net/KEM.627.221

Budzik, M. K. & Jensen, H. M. (2014). Fracture in the single cantilever beam test with small and large scale bridging. Paper presented at 13th International Conference on Fracture and Damage Mechanics, Azores, Portugal.

Budzik, M. K. & Jensen, H. M. (2016). Evaluation of defects in adhesive joint by double cantilever beam experiment. Key Engineering Materials, 665, 101-104. https://doi.org/10.4028/www.scientific.net/KEM.665.101

Budzik, M. K. & Jensen, H. M. (2016). Experimental study of cracks at interfaces with voids. In Procedia Structural Integrity: 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy (Vol. 2, pp. 277-284). Elsevier Masson. https://doi.org/10.1016/j.prostr.2016.06.036

Bardella, L. & Jensen, H. M. (2025). Preface: Thematic session SM12 on Plasticity, Viscoplasticity and Creep of the 26th International Congress of Theoretical and Applied Mechanics (ICTAM2024). International Journal of Solids and Structures, 322, Article 113624. https://doi.org/10.1016/j.ijsolstr.2025.113624

Displaying results 101 to 121 out of 121

Revised 13.11.2025

Henrik Myhre Jensen