Find

For students
For PhDs
For employees

Department of Mechanical and Production Engineering

Publications

Below you can find a complete list of the publications that are written by employees at the Publications at Department of Mechanical and Production Engineering for example journal articles, books, reports etc.

Publication list

Sort by: Date | Author | Title

Migliorini, M., Doll, U., Lawson, N. J., Melnikov, S. M., Steinbock, J., Dues, M., Zachos, P. K., Röhle, I. & MacManus, D. G. (2025). Advancements on the use of Filtered Rayleigh Scattering (FRS) with Machine learning methods for flow distortion in Aero-Engine intakes. Experimental Thermal and Fluid Science, 160, 111325. Article 111325. https://doi.org/10.1016/j.expthermflusci.2024.111325

Farhadiyadkuri, F. & Zhang, X. (2025). A Five-Dimensional Three-Layer Digital Twin to Train a Reinforcement Learning Agent for Interaction Control of a Robotic Exoskeleton in Adolescent Idiopathic Scoliosis Rehabilitation. International Journal of Mechanical System Dynamics. Advance online publication. https://doi.org/10.1002/msd2.70020

Sadik, S. & Yavari, A. (2025). A Generalised Coleman-Noll Procedure and the Balance Laws of Hyper-Anelasticity. https://doi.org/10.48550/arXiv.2403.14543

Qian, F., Ding, H., Liu, T., Wu, Z., Zhang, X. & Iqbal, A. (2025). An adaptive active vibration control for flexible beam systems under unknown deterministic disturbances. Mechanical Systems and Signal Processing, 228, Article 112447. https://doi.org/10.1016/j.ymssp.2025.112447

Chedevergne, F., Yang, J., Stroh, A. & Forooghi, P. (2025). Analysis of Separation in the Roughness Sublayer Using DNS Data and DANS/DEM Modelling of Roughness Effects. Flow, Turbulence and Combustion, 114(3), 713-735. Article 021202. https://doi.org/10.1007/s10494-024-00585-9

Formentini, G., Prioli, J. PJ., Ko, J., Hapuwatte, B., Ferrero, V., Badurdeen, F., Rickli, J. L. & Ramanujan, D. (2025). A review of disassembly systems for circular product design. Journal of Cleaner Production, 506, Article 145459. https://doi.org/10.1016/j.jclepro.2025.145459

Li, L. & Zhang, X. (2025). A robust assessment method of point cloud quality for enhancing 3D robotic scanning. Robotics and Computer-Integrated Manufacturing, 92, Article 102863. https://doi.org/10.1016/j.rcim.2024.102863

Jensen, R. M. & Forooghi, P. (2025). A study of turbulent flow over patchy roughness. Journal of Fluid Mechanics, 1006, Article A28. https://doi.org/10.1017/jfm.2024.1095

Darabi, R., Oliveira, J. P., Nemati, N., Reis, A. & de Sá, J. C. (2025). Benchmarking advanced multiphase field modeling of Inconel 625 in additive manufacturing: Correlating powder bed fusion with dendrite growth and crack formation. Materialia, 40, Article 102384. https://doi.org/10.1016/j.mtla.2025.102384

van Innis, C., Budzik, M. K. & Pardoen, T. (2025). Bridging in co-cured composite joints. International Journal of Solids and Structures, 309, Article 113194. https://doi.org/10.1016/j.ijsolstr.2024.113194

Li, W., Wu, S., Zhu, J., Zhang, L., Zheng, J., Wang, H., Qiu, Y., Xie, G. & Li, C. (2025). Constitutive modelling of time-dependent polymer matrix composites: Incorporating a visco-hyperelastic model into the micromechanical framework. Composite Structures, 366, Article 119220. https://doi.org/10.1016/j.compstruct.2025.119220

Li, J., Zhou, X., Brochu, M., Chekir, N., Sixsmith, J. J. & Zhao, Y. F. (2025). Crystal introducing mechanism in laser wire directed energy deposition fabricated Ti6Al4V. Progress in Additive Manufacturing, 10(2), 1231-1241. https://doi.org/10.1007/s40964-024-00701-1

Hu, P., Li, S. & Budzik, M. K. (2025). Decoupling fracture energy from crack area via surface patterning. Surfaces and Interfaces, 62, Article 106066. https://doi.org/10.1016/j.surfin.2025.106066

He, L., Wang, C., Zhang, M., Li, J., Chen, T. & Zhou, X. (2025). Design of BCC/FCC dual-solid solution refractory high-entropy alloys through CALPHAD, machine learning and experimental methods. npj Computational Materials, 11(1), Article 105. https://doi.org/10.1038/s41524-025-01597-3

Djeffal, S., Ghoul, A., Saadi, A., Izri, Z., Morakchi, M. R. & Wang, H. (2025). Design optimization and simulation of a 3D printed cable-driven continuum robot using IKM-ANN and nTop software. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 239(2), 200-218. https://doi.org/10.1177/09596518241276233

Fulco, S., Budzik, M. K., Xiao, H., Durian, D. J. & Turner, K. T. (2025). Disorder enhances the fracture toughness of 2D mechanical metamaterials. PNAS Nexus, 4(2), Article pgaf023. https://doi.org/10.1093/pnasnexus/pgaf023

Hund, J., Kouznetsova, V. & Andriollo, T. (2025). Efficient prediction of strength and strain localisation in porous solids via microstructure-based limit analysis. Mechanics of Materials, 201, Article 105208. https://doi.org/10.1016/j.mechmat.2024.105208

Islam, R., Madsen, S. P. & Christensen, M. (2025). Enhancing magnetocrystalline anisotropy in W-type SrFe₁₈O₂₇ hexaferrite via tailored substitutions. Acta Materialia, 288, 120828. Article 120828. https://doi.org/10.1016/j.actamat.2025.120828

Jensen, J. S. K., Esmizadeh, S., Lund, M., Juhl, J., Nemati, N. & Aghababaei, R. (2025). Evaluating the effect of particle roundness on three-body wear between polymers and metals. Wear, Article 206000. Advance online publication. https://doi.org/10.1016/j.wear.2025.206000

Mikropoulos, E., Roelfsema, M., Chen, H. H., Staffell, I., Oreggioni, G., Hdidouan, D., Thellufsen, J. Z., Chang, M. A., Fragkos, P., Giannousakis, A., Chatterjee, S., Ürge-Vorsatz, D., Pfenninger, S., Pickering, B., Victoria, M., Brown, T. & van Vuuren, D. P. (2025). Examining pathways for a climate neutral Europe by 2050: A model comparison analysis including integrated assessment models and energy system models. Energy, 319, Article 134809. https://doi.org/10.1016/j.energy.2025.134809

Friis, S. J., Strøm Hansen, T., Olesen, C. G., Poulsen, M., Gregersen, H. & Nygaard, J. V. (2025). Experimental and numerical study of solid needle insertions into human stomach tissue. Journal of the Mechanical Behavior of Biomedical Materials, 162, Article 106832. https://doi.org/10.1016/j.jmbbm.2024.106832

Bontempi, L., Zattoni, M., Ramella, A., Migliavacca, F., Ringgaard, S., Kim, W. Y., Johansen, P. & Colombo, M. (2025). Idealized aortic annuloplasty FSI digital twin of 3D-printed phantoms with 4D-flow MRI comparison. Computers in Biology and Medicine, 192, Article 110398. https://doi.org/10.1016/j.compbiomed.2025.110398

Truong, T. T., Airao, J., Fattahi, S., Azarhoushang, B., Karras, P. & Aghababaei, R. (2025). Image-based machine learning model for tool wear estimation in milling Inconel 718. Wear, Article 205865. Advance online publication. https://doi.org/10.1016/j.wear.2025.205865

Bernal, D., Brandt, A. & Ulriksen, M. D. (2025). Improved Consistency on a Common Virtual Sensing Scheme. Abstract from IMAC XLIII, Orlando, Florida, United States.

Mansour, R., Enblom, P., Subasic, M., Ireland, A., Gustavsson, F., Forssgren, B. & Efsing, P. (2025). Influence of temperature-dependent viscoplastic relaxation and strain-induced martensitic transformation on the fatigue life of 304L stainless steel. International Journal of Fatigue, 198, Article 108992. https://doi.org/10.1016/j.ijfatigue.2025.108992

Aher, G., Sandberg, M., Boudjadar, J. & Ramanujan, D. (2025). Informing circularity-focused design optimization using parametric life-cycle engineering simulation models. Smart and Sustainable Manufacturing Systems, 9(1), 11-36. https://doi.org/10.1520/SSMS20240018

Ulriksen, M. D., Gres, S., Nieto, P. Z., Dahl, M. B. & Bernal, D. (2025). Invariant eigenvalue assignment and uncertainty quantification for damage localization. Journal of Vibration and Control. Advance online publication. https://doi.org/10.1177/10775463251315981

Nozarian, S., Hansen, C., Forooghi, P. & Abkar, M. (2025). Laminarization through annular gap injection in turbulent pipe flows: A large eddy simulation study. Physics of Fluids, 37(5), Article 055128 . https://doi.org/10.1063/5.0264788

Victoria, M., Zhang, Z., Bruun Andresen, G., Rahdan, P. & Gøtske, E. K. (2025). Lessons learned from establishing a rooftop photovoltaic system crowdsourced by students and employees at Aarhus University.

Shojaeifard, M., Ferraresso, M., Lucantonio, A. & Bacca, M. (2025). Machine learning-based optimal design of fibrillar adhesives. Journal of the Royal Society Interface, 22(223), Article 20240636. https://doi.org/10.1098/rsif.2024.0636

Luo, X., Andriollo, T., Baxevanakis, K. P. & Silberschmidt, V. V. (2025). Microstructural effect on fracture evolution in spheroidal graphite iron: Numerical analysis. Engineering Failure Analysis, 174, Article 109459. https://doi.org/10.1016/j.engfailanal.2025.109459

Niknafs, S., Silani, M., Concli, F. & Aghababaei, R. (2025). Numerical analysis of fatigue crack propagation using a coarse-grained molecular dynamics approach. International Journal of Solids and Structures, 311, Article 113245. https://doi.org/10.1016/j.ijsolstr.2025.113245

Malekan, M., Madsen, K. L., Airao, J., Ilvig, C. F. & Aghababaei, R. (2025). Numerical assessment of tool geometry for improving productivity in milling stainless steel 316 L. International Journal of Advanced Manufacturing Technology, 136(7), 3451-3463. Article 109782. https://doi.org/10.1007/s00170-025-15061-5

Rahdan, P. (2025). On the role of solar photovoltaics and demand management in the transition of the European energy systemto net-zero emissions. Aarhus University Library.

Rahdan, P. & Victoria, M. (2025). Pathways to Net-Zero: Exploring consumers’ behavioural changes for flexibility and demand reduction from a system perspective.

Zeyen, E., Kalweit, S., Victoria, M. & Brown, T. (2025). Shifting burdens: how delayed decarbonisation of road transport affects other sectoral emission reductions. Environmental Research Letters, 20(4), Article 044044. https://doi.org/10.1088/1748-9326/adc290

Calafà, M., Jensen, H. M. & Andriollo, T. (2025). Solving plane crack problems via enriched holomorphic neural networks. Engineering Fracture Mechanics, 322, Article 111133. https://doi.org/10.1016/j.engfracmech.2025.111133

E.F. Athanasiadis, A., Duncan, O., Budzik, M. K. & Dias, M. A. (2025). Toughness of Confined Auxetic Foams. Advanced Engineering Materials. Advance online publication. https://doi.org/10.1002/adem.202500626

Airao, J., Jain, A., Nirala, C. K. & Unune, D. (2025). Tribological performance in micro-milling of Ti6Al4V under nanofluid-based minimum quantity lubrication. International Journal on Interactive Design and Manufacturing, 19(3), 1807-1819. https://doi.org/10.1007/s12008-024-01856-5

Sandhu, K., Sarkar, P. & Karupppasamy, S. (2025). Understanding entrepreneurial thinking for designers: Perspectives from entrepreneurs, academicians, product designers, and students. Thinking Skills and Creativity, 56, Article 101728. https://doi.org/10.1016/j.tsc.2024.101728

Eheliyagoda, D., Veluri, B., Liu, G. & Ramanujan, D. (2025). Unveiling the multiregional circular economy pathways for global dysprosium constraints. Resources, Conservation and Recycling, 215, Article 108121. https://doi.org/10.1016/j.resconrec.2024.108121

Zhou, Z., Yang, X. & Zhang, X. (2025). Variable impedance control on contact-rich manipulation of a collaborative industrial mobile manipulator: An imitation learning approach. Robotics and Computer-Integrated Manufacturing, 92, Article 102896. https://doi.org/10.1016/j.rcim.2024.102896

Dues, M., Dues, F., Steinbock, J., Melnikov, S., Doll, U., Röhle, I., Migliorini, M. & K. Zachos, P. (2024). 2D3C Measurement Of Velocity, Pressure And Temperature Fields In A Intake Flow Of An Air Turbine By Filtered Rayleigh Sattering (FRS) And Validation With LDV And PIV. In 21th International Symposium on the Application of Laser and Imaging Techniques to Fluid Mechanics https://doi.org/10.55037/lxlaser.21st.21

Glisic, M., Veluri, B. & Ramanujan, D. (2024). A Bottom-Up Methodology for Identifying Key Performance Indicators for Sustainability Monitoring of Unit Manufacturing Processes. Sustainability, 16(2), Article 806. https://doi.org/10.3390/su16020806

Hansen, J. G. & de Figueiredo, R. P. (2024). Active Object Detection and Tracking Using Gimbal Mechanisms for Autonomous Drone Applications. Drones, 8(2), Article 55. https://doi.org/10.3390/drones8020055

Kunrath, K., Leka, S., Vestergaard, L. S., Presser, M. & Ramanujan, D. (2024). A Digital Tool for Scaffolding Innovation Learning in Engineering Education with Local Industry Needs. International Journal of Engineering Education, 40(4), 801-814.

Du, Y., Liu, Z. & Zhang, X. (2024). Advancing Locomotion Control of a Quadruped Robot: Harnessing Hybrid Control Algorithms and Digital Twin Technology. In 2024 10th International Conference on Automation, Robotics, and Applications, ICARA 2024 (pp. 144-149). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICARA60736.2024.10553027

Wu, Z. & Møller, C. (2024). A global SOP perspective: managing cannibalization effect at the early phase of product transition. In 23rd International Working Seminar on Production Economics Universität Innsbruck.

Nozarian, S., Abkar, M. & Forooghi, P. (2024). An analysis of drag reduction using spanwise forcing on rough walls. International Journal of Heat and Fluid Flow, 106, Article 109306. https://doi.org/10.1016/j.ijheatfluidflow.2024.109306

Sanz-Cuadrado, C., Rahdan, P., Zhang, Z., Victoria, M. & Belén Cristóbal, A. (2024). A New Approach to Assess Individual Contributions to Energy Transition Goals.

Displaying results 1 to 50 out of 444

1

AU Engineering Profile

Download AU Engineering Profile 2013-2022:

Revised 22.02.2024

-

AU Engineering