Publications

Sortér efter: Dato | Forfatter | Titel

Vishnu, K., Subburaj, K. & Colombo, M. (2025). A two-phase fluid structure interaction model of mucociliary clearance driven by cilium. Computer Methods in Biomechanics and Biomedical Engineering. Advance online publication. https://doi.org/10.1080/10255842.2025.2535014

Velu, R., Karupppasamy, S. & Kumar Subramaniyan, A. K. (red.) (2024). Digital Design and Manufacturing of Medical Devices and Systems. (1 udg.) Springer. https://doi.org/10.1007/978-981-99-7100-8

Subburaj, K., Ravi, B. & Agarwal, M. G. (2009). Computerized Assessment of Excessive Femoral and Tibial Torsional Deformation by 3D Anatomical Landmarks Referencing. I 13th International Conference on Biomedical Engineering - ICBME 2008 (s. 129-132) https://doi.org/10.1007/978-3-540-92841-6_32

Strack, D., Manohar Rayudu, N., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2024). OPTIMIZING PATIENT-SPECIFIC BONE FINITE ELEMENT ANALYSIS: MESH CONVERGENCE AND MATERIAL GROUPING STRATEGIES. Orthopaedic Proceedings, 127. https://doi.org/10.1302/1358-992X.2024.18.127

Strack, D., Mesbah, M., Manohar Rayudu, N., Baum, T., Kirschke , J. S. & Karupppasamy, S. (2024). IMPACT OF ANNULUS FIBROSUS STIFFNESS ON THE FRACTURE LOAD OF FUNCTIONAL SPINE UNITS. Orthopaedic Proceedings, 102. https://doi.org/10.1302/1358-992X.2024.18.102

Strack, D., Mesbah, M., Kirschke , J. S. & Karupppasamy, S. (2025). Biomechanical Alterations Following Vertebral Fracture: A Patient-Specific L3-L5 Finite Element Analysis. Abstract fra World Congress of Orthopaedic Research, Adelaide, Sydaustralien, Australien. https://doi.org/10.13140/RG.2.2.28212.10884

Strack, D., Dieckmeyer, M., Sollmann , N., Kirschke , J. S. & Karupppasamy, S. (2025). Unexpectedly Higher Finite Element-Derived Strength in Fractured Vertebrae: Insights from a Retrospective Study. Abstract fra Annual Meeting of the American Society of Bone and Mineral Research, Seattle, Washington, USA. https://doi.org/10.13140/RG.2.2.18868.72321

Strack, D., Mesbah, M., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2025). Interpatient variability and validation of simplified L4-L5 Finite Element Model. Abstract fra The XXX Congress of the International Society of Biomechanics , Stockholm, Sverige. https://www.researchgate.net/publication/395188992_Interpatient_variability_and_validation_of_simplified_L4-L5_Finite_Element_Model

Srinivasan, V., Song, B., Luo, J., Karupppasamy, S., Elara Mohan, R., Blessing, L. & Wood, K. (2023). Do Analogies and Analogical Distance Influence Ideation Outcomes in Engineering Design? I S. Mukherjee, V. Dutt & N. Srinivasan (red.), Applied Cognitive Science and Technology: Implications of Interactions Between Human Cognition and Technology (s. 211–230). Springer. https://doi.org/10.1007/978-981-99-3966-4_13

Sollmann , N., Kirscke, J. S., Kronthaler, S., Boehm, C., Dieckmeyer, M., Vogele, D., Kloth, C., Lisson, C. G., Carballido-Gamio, J., Link, T. M., Charalampos Karampinos, D., Karupppasamy, S., Beer, M., Krug, R. & Baum, T. (2022). Imaging of the Osteoporotic Spine – Quantitative Approaches in Diagnostics and for the Prediction of the Individual Fracture Risk: Bildgebung der osteoporotischen Wirbelsäule – quantitative Ansätze für die Diagnostik und Abschätzung des individuellen Frakturrisikos. RöFo. Fortschritte auf dem Gebiet der Roentgenstrahlen und der bildgebenden Verfahren, 194(10), 1088-1099. https://doi.org/10.1055/a-1770-4626

Sollmann , N., A. Becherucci, E., Boehm, C., El Husseini, M., Ruschke, S., Burian, E., Kirschke , J. S., Link, T. M., Karupppasamy, S., Charalampos Karampinos, D., Krug, R., Baum, T. & Dieckmeyer, M. (2022). Texture Analysis using CT and Chemical Shift Encoding-Based Water-Fat MRI can Improve Differentiation between Patients with and without Osteoporotic Vertebral Fractures. Frontiers in Endocrinology, 12, Artikel 778537. https://doi.org/10.3389/fendo.2021.778537

Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Entrepreneurial thinking in engineering design education: a comparative study of cognitive paradigms with insights from industry and academia. Entrepreneurship Education. Advance online publication. https://doi.org/10.1007/s41959-025-00158-5

Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Identification of Skills for Entrepreneurial Thinking Using Natural Language Processing: An Exploration of Entrepreneurs, Faculties Members and Design Students. I A. Chakrabarti, V. Singh, P. S. Onkar & M. Shahid (red.), Responsible and Resilient Design for Society - Proceedings of ICoRD 2025 (Bind 4, s. 255-266). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-981-96-5495-6_20

Sandhu, K., Sarkar, P. & Karupppasamy, S. (2025). Understanding entrepreneurial thinking for designers: Perspectives from entrepreneurs, academicians, product designers, and students. Thinking Skills and Creativity, 56, Artikel 101728. https://doi.org/10.1016/j.tsc.2024.101728

Sandhu, K., Karupppasamy, S., Pal, M., Sarkar, P. & Singh, S. (red.) (2025). Footwear Innovation: From Conceptual Design through to Advanced Manufacturing Techniques. (1 udg.) Elsevier, Academic Press. https://doi.org/10.1016/C2023-0-52605-9

Raviselvam, S., Karupppasamy, S., Hölttä-Otto, K. & L. Wood, K. (2022). Systematic Application of Extreme-User Experiences: Impact on the Outcomes of an Undergraduate Medical Device Design Module. Biomedical Engineering Education, 2, 233–252. https://doi.org/10.1007/s43683-022-00065-4

Rai, P., Jankiraman, V., Teacher, M., Velu, R., Anand Kumar, S., Binedell, T. & Karupppasamy, S. (2022). Design and optimization of a 3D printed prosthetic socket for transtibial amputees, Materials Today: Proceedings, 70, 454-464. https://doi.org/10.1016/j.matpr.2022.09.365

Pal, D. K., Raychaudhuri, T. K., Ravi, B. & Subburaj, K. (2007). Rapid Tooling route selection and evaluation for sand and investment casting. I Proceedings of the 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping: Virtual and Rapid Manufacturing Advanced Research Virtual and Rapid Prototyping (s. 455-462)

Ng, F. C., Lim, S. K. T., Karupppasamy, S., Tan, U.-X., Chen, L., Foong, S., Yang, L., Li, H.-Y., Paranawithana, I. C. K., Chau, Z. H. & Mookiah, M. R. K. (2019). Motion Compensation Platform for Image Guided Percutaneous Access to Bodily Organs and Structures. (Patentnummer WO2019132781 (A1)). https://dk.espacenet.com/publicationDetails/biblio?CC=WO&NR=2019132781A1&KC=A1&FT=D&ND=3&date=20190704&DB=EPODOC&locale=dk_DK#

Nagarajan, K., Koronis, G., Karupppasamy, S. & Silva, A. (2022). Atypical Use Scenarios as Design Intervention in Healthcare Product Design Application. I Proceedings of the Design Society 2: DESIGN2022 (Bind 2, s. 1323-1330). Cambridge University Press. https://doi.org/10.1017/pds.2022.134

Mookiah, M. R. K., Rohrmeier, A., Dieckmeyer, M., Mei, K., K. Kopp, F., B. Noël, P., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2018). Feasibility of opportunistic osteoporosis screening in routine contrast-enhanced Multi-Detector Computed Tomography using texture analysis. Osteoporosis International, 29(4), 825-835. https://doi.org/10.1007/s00198-017-4342-3

Manohar Rayudu, N., Karupppasamy, S., Elara Mohan, R., Sollmann , N., Dieckmeyer, M., Kirschke , J. S. & Baum, T. (2022). Patient-Specific Finite Element Modeling of the Whole Lumbar Spine Using Clinical Routine Multi-Detector Computed Tomography (MDCT) Data—A Pilot Study. Biomedicines, 10(7), Artikel 1567. https://doi.org/10.3390/biomedicines10071567

Long Yu, Y. & Karupppasamy, S. (2022). 3D-Printed Orthotics for Pediatric Lower Limb Deformities Correction. I 3D Printing in Pediatric Medicine (s. 51-82). Academic Press. https://www.sciencedirect.com/science/article/pii/B9780323919111000031?via%3Dihub

Loh, C. Y. I., Tay, Y. E., Karupppasamy, S., Phang, T. A., Sim, M. Y., Ng, B. & Sin, V. (2020). Device for Skin Biopsy. (Patentnummer WO2020167250 (A1)). https://dk.espacenet.com/publicationDetails/biblio?CC=WO&NR=2020167250A1&KC=A1&FT=D&ND=3&date=20200820&DB=EPODOC&locale=dk_DK#

Lerchl, T., Strack, D., Allaire, B., Yee, E., Scott, R., Nispel, K., Moeller, H., Graf, R., Karupppasamy, S., Kirschke , J. S., Bouxsein, M. L. & Anderson, D. E. (2025). THE EFFECTS OF PREVALENT VERTEBRAL FRACTURES ON SPINAL BIOMECHANICS. Abstract fra 20th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Barcelona, Spanien. https://www.researchgate.net/publication/397941200_THE_EFFECTS_OF_PREVALENT_VERTEBRAL_FRACTURES_ON_SPINAL_BIOMECHANICS

Leonhardt, Y., Dieckmeyer, M., Zoffl , F., Feuerriegel, G. C., Sollmann , N., Junker, D., Greve, T., Holzapfel , C., Hauner, H., Karupppasamy, S., Kirschke , J. S., Karampinos, D. C., Zimmer, C., Makowski , M. R., Baum, T. & Burian, E. (2022). Associations of Texture Features of Proton Density Fat Fraction Maps between Lumbar Vertebral Bone Marrow and Paraspinal Musculature. Biomedicines, 10(9), Artikel 2075. https://doi.org/10.3390/biomedicines10092075

Kumar , R., Sandhu, K., Ranjan, N., Singh, S., Sarkar, P., Karupppasamy, S. & Ramakrishna, S. (2023). Form exploration on different fabrics using material extrusion based additive manufacturing and end users experience. Journal of Manufacturing Processes, 101, 959-973. https://doi.org/10.1016/j.jmapro.2023.06.053

Kaur, S., Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Understanding User Experience: Exploration of Various Definitions Using Natural Language Process. I A. Chakrabarti, V. Singh, P. S. Onkar & M. Shahid (red.), Responsible and Resilient Design for Society: Proceedings of ICoRD 2025 (Bind 4, s. 231-241). Springer. https://doi.org/10.1007/978-981-96-5495-6_18

Karupppasamy, S., Kamalpreet , S. & Saša Ćuković, S. Ć. (red.) (2022). Revolutions in Product Design for Healthcare: Advances in Product Design and Design Methods for Healthcare. Springer. Design Science and Innovation https://doi.org/10.1007/978-981-16-9455-4

Karupppasamy, S., Singh, S., Ćuković, S., Sandhu, K., Meixner, G. & Petruse, R. E. (red.) (2024). Smart VR/AR/MR Systems for Professionals. CRC Press. https://doi.org/10.1201/9781003306078

Karupppasamy, S. (2025). Pragmatic customization in medical device design for sustainable healthcare. I P. Kyratsis, A. Manavis & P. J. Davim (red.), CAD/CAM: Computer-Aided Design and Manufacturing, (s. 143). De Gruyter. https://doi.org/10.1515/9783111585062-007

Kamalpreet , S., Singh, S., Prakash, C., Karupppasamy, S. & Ramakrishnaa , S. (red.) (2022). 3D Printing in Podiatric Medicine. Academic Press. https://www.elsevier.com/books/3d-printing-in-podiatric-medicine/sandhu/978-0-323-91911-1

Kalimeri, M., Totman, J. J., Baum, T., Diefenbach, M. N., Hauner, H., Makowski, M. R., Subburaj, K., Cameron-Smith, D., Henry, C. J., Karampinos, D. C. & Junker, D. (2021). Postmenopausal chinese-singaporean women have a higher ratio of visceral to subcutaneous adipose tissue volume than caucasian women of the same age and bmi. Diagnostics, 11(11), Artikel 2127. https://doi.org/10.3390/diagnostics11112127

Hesse, N., Strack, D., Rischewski, J. F., Gassert, F. T., Kufner, A., Urban, T., Lochschmidt, M. E., Schwaiger, B. J., Braun, C., Mueller, D. P., Pfeiffer, D., Baum, T., Subburaj, K., Pfeiffer, F. & Gersing, A. S. (2025). Finite element fracture load analysis and dark-field X-ray imaging of osteoporotic and healthy vertebrae in human lumbar spine specimens. BMC Musculoskeletal Disorders, 26(1), Artikel 545. https://doi.org/10.1186/s12891-025-08709-6

Greve, T., Manohar Rayudu, N., Dieckmeyer, M., Boehm, C., Ruschke, S., Burian, E., Kloth, C., Kirschke , J. S., Charalampos Karampinos, D., Baum, T., Karupppasamy, S. & Sollmann , N. (2022). Finite element analysis of osteoporotic and osteoblastic vertebrae and its association with the proton density fat fraction from chemical shift encoding-based water-fat MRI – a preliminary study. Frontiers in Endocrinology, 13, Artikel 900356. https://doi.org/10.3389/fendo.2022.900356

Go, Y., Etsuo, C., Duraisamy, S. & Karupppasamy, S. (2022). Meniscus implant. (Patentnummer WO2022065312 (A1)). https://dk.espacenet.com/publicationDetails/biblio?CC=WO&NR=2022065312A1&KC=A1&FT=D&ND=3&date=20220331&DB=EPODOC&locale=dk_DK#

Dieckmeyer, M., Sollmann , N., El Husseini, M., Sekuboyina, A., T. Löffler, M., Zimmer, C., Kirschke , J. S., Karupppasamy, S. & Baum, T. (2022). Gender-, Age- and Region-Specific Characterization of Vertebral Bone Microstructure Through Automated Segmentation and 3D Texture Analysis of Routine Abdominal CT. Frontiers in Endocrinology, 12, Artikel 792760. https://doi.org/10.3389/fendo.2021.792760

Cukovic, S., Devedzic, G., Ivanovic, L., Lukovic, T. Z. & Subburaj, K. (2010). Development of 3D kinematic model of the spine for idiopathic scoliosis simulation. Computer-Aided Design and Applications, 7(1), 153-161. https://doi.org/10.3722/cadaps.2010.153-161

Chandran, R., Lim, J. K. T., Koo, S. H., Karupppasamy, S., Lim, J. H., Poh, Y. J. V., Ong, P. J. J. & Lu, W. Y. (2020). A Guidewire Management Device. (Patentnummer WO2020256642 (A1)). https://dk.espacenet.com/publicationDetails/biblio?CC=WO&NR=2020256642A1&KC=A1&FT=D&ND=3&date=20201224&DB=EPODOC&locale=dk_DK#

Bodden, J., Dieckmeyer, M., Sollmann , N., Rühling, S., Prucker, P., T. Löffler, M., Burian, E., Karupppasamy, S., Zimmer, C., Kirschke , J. S. & Baum, T. (2023). Long-term reproducibility of opportunistically assessed vertebral bone mineral density and texture features in routine clinical multi-detector computed tomography using an automated segmentation framework. Quantitative Imaging in Medicine and Surgery (QIMS), 13(9), 5472-5482. https://doi.org/10.21037/qims-23-19

Binedell, T. & Karupppasamy, S. (2022). Design for Additive Manufacturing of Prosthetic and Orthotic Devices. I S. Karupppasamy , S. Kamalpreet & S. Ćuković (red.), Revolutions in Product Design for Healthcare: Advances in Product Design and Design Methods for Healthcare (s. 75–99). Springer. https://doi.org/10.1007/978-981-16-9455-4

Binedell, T., Fazli Bin Ghazali, M., Wong, C., Karupppasamy, S. & Blessing, L. (2023). Measuring discomfort—An objective method for quantifying peak pressure discomfort and improved fit in adults with transtibial amputation. PM & R, 15(4), 482-492. https://doi.org/10.1002/pmrj.12796

Binedell, T., Gupta, U., Sithanathan, B., Karupppasamy, S. & Blessing, L. (2023). Mapping lines of non-extension in persons with lower limb amputation to aid comfort-driven prosthetic socket design. Medical Engineering & Physics, 118, Artikel 104018. https://doi.org/10.1016/j.medengphy.2023.104018

Revideret 13.11.2025

Subburaj Karupppasamy