Rai, P., Jankiraman, V., Teacher, M., Velu, R., Anand Kumar, S., Binedell, T.
& Karupppasamy, S. (2022).
Design and optimization of a 3D printed prosthetic socket for transtibial amputees, Materials Today: Proceedings,
70, 454-464.
https://doi.org/10.1016/j.matpr.2022.09.365
Mookiah, M. R. K., Rohrmeier, A., Dieckmeyer, M., Mei, K., K. Kopp, F., B. Noël, P., Kirschke , J. S., Baum, T.
& Karupppasamy, S. (2018).
Feasibility of opportunistic osteoporosis screening in routine contrast-enhanced Multi-Detector Computed Tomography using texture analysis.
Osteoporosis International,
29(4), 825-835.
https://doi.org/10.1007/s00198-017-4342-3
Dieckmeyer, M., Sollmann , N., El Husseini, M., Sekuboyina, A., T. Löffler, M., Zimmer, C., Kirschke , J. S.
, Karupppasamy, S. & Baum, T. (2022).
Gender-, Age- and Region-Specific Characterization of Vertebral Bone Microstructure Through Automated Segmentation and 3D Texture Analysis of Routine Abdominal CT.
Frontiers in Endocrinology,
12.
https://doi.org/10.3389/fendo.2021.792760
Sollmann , N., A. Becherucci, E., Boehm, C., El Husseini, M., Ruschke, S., Burian, E., Kirschke , J. S., Link, T. M.
, Karupppasamy, S., Charalampos Karampinos, D., Krug, R., Baum, T. & Dieckmeyer, M. (2022).
Texture Analysis using CT and Chemical Shift Encoding-Based Water-Fat MRI can Improve Differentiation between Patients with and without Osteoporotic Vertebral Fractures.
Frontiers in Endocrinology,
12, [778537].
https://doi.org/10.3389/fendo.2021.778537
Greve, T., Manohar Rayudu, N., Dieckmeyer, M., Boehm, C., Ruschke, S., Burian, E., Kloth, C., Kirschke , J. S., Charalampos Karampinos, D., Baum, T.
, Karupppasamy, S. & Sollmann , N. (2022).
Finite element analysis of osteoporotic and osteoblastic vertebrae and its association with the proton density fat fraction from chemical shift encoding-based water-fat MRI – a preliminary study.
Frontiers in Endocrinology,
13.
https://doi.org/10.3389/fendo.2022.900356
Ng, F. C., Lim, S. K. T.
, Karupppasamy, S., Tan, U-X., Chen, L., Foong, S., Yang, L., Li, H-Y., Paranawithana, I. C. K., Chau, Z. H. & Mookiah, M. R. K. (2019).
Motion Compensation Platform for Image Guided Percutaneous Access to Bodily Organs and Structures. (Patentnummer
WO2019132781 (A1)).
https://dk.espacenet.com/publicationDetails/biblio?CC=WO&NR=2019132781A1&KC=A1&FT=D&ND=3&date=20190704&DB=EPODOC&locale=dk_DK#
Manohar Rayudu, N.
, Karupppasamy, S., Elara Mohan, R., Sollmann , N., Dieckmeyer, M., Kirschke , J. S. & Baum, T. (2022).
Patient-Specific Finite Element Modeling of the Whole Lumbar Spine Using Clinical Routine Multi-Detector Computed Tomography (MDCT) Data—A Pilot Study.
Biomedicines,
10(7), [1567].
https://doi.org/10.3390/biomedicines10071567
Binedell, T., Fazli Bin Ghazali, M., Wong, C.
, Karupppasamy, S. & Blessing, L. (2023).
Measuring discomfort—An objective method for quantifying peak pressure discomfort and improved fit in adults with transtibial amputation.
PM and R,
15(4), 482-492.
https://doi.org/10.1002/pmrj.12796
Loh, C. Y. I., Tay, Y. E.
, Karupppasamy, S., Phang, T. A., Sim, M. Y., Ng, B. & Sin, V. (2020).
Device for Skin Biopsy. (Patentnummer
WO2020167250 (A1)).
https://dk.espacenet.com/publicationDetails/biblio?CC=WO&NR=2020167250A1&KC=A1&FT=D&ND=3&date=20200820&DB=EPODOC&locale=dk_DK#
Sollmann , N., Kirscke, J. S., Kronthaler, S., Boehm, C., Dieckmeyer, M., Vogele, D., Kloth, C., Lisson, C. G., Carballido-Gamio, J., Link, T. M., Charalampos Karampinos, D.
, Karupppasamy, S., Beer, M., Krug, R. & Baum, T. (2022).
Imaging of the Osteoporotic Spine – Quantitative Approaches in Diagnostics and for the Prediction of the Individual Fracture Risk: Bildgebung der osteoporotischen Wirbelsäule – quantitative Ansätze für die Diagnostik und Abschätzung des individuellen Frakturrisikos.
RöFo. Fortschritte auf dem Gebiet der Roentgenstrahlen und der bildgebenden Verfahren,
194(10), 1088-1099.
https://doi.org/10.1055/a-1770-4626
Chandran, R., Lim, J. K. T., Koo, S. H.
, Karupppasamy, S., Lim, J. H., Poh, Y. J. V., Ong, P. J. J. & Lu, W. Y. (2020).
A Guidewire Management Device. (Patentnummer
WO2020256642 (A1)).
https://dk.espacenet.com/publicationDetails/biblio?CC=WO&NR=2020256642A1&KC=A1&FT=D&ND=3&date=20201224&DB=EPODOC&locale=dk_DK#
Leonhardt, Y., Dieckmeyer, M., Zoffl , F., Feuerriegel, G. C., Sollmann , N., Junker, D., Greve, T., Holzapfel , C., Hauner, H.
, Karupppasamy, S., Kirschke , J. S., Karampinos, D. C., Zimmer, C., Makowski , M. R., Baum, T. & Burian, E. (2022).
Associations of Texture Features of Proton Density Fat Fraction Maps between Lumbar Vertebral Bone Marrow and Paraspinal Musculature.
Biomedicines,
10(9).
https://doi.org/10.3390/biomedicines10092075
Feng, H., Gomes, C., Sandberg, M., Macedo, H. D. & Larsen, P. G. (2022).
Under What Conditions Does a Digital Shadow Track a Periodic Linear Physical System? I A. Cerone, M. Autili, A. Bucaioni, C. Gomes, P. Graziani, M. Palmieri, M. Temperini & G. Venture (red.),
Software Engineering and Formal Methods. SEFM 2021 Collocated Workshops (s. 143-155). Springer. Lecture Notes in Computer Science Bind 13230
https://doi.org/10.1007/978-3-031-12429-7_11
Feng, H., Gomes, C., Sandberg, M., Thule, C., Lausdahl, K. & Larsen, P. G. (2021).
Developing a Physical and Digital Twin: An Example Process Model. I
2021 ACM/IEEE International Conference on Model Driven Engineering Languages and Systems Companion (MODELS-C) (s. 286-295). IEEE.
https://doi.org/10.1109/MODELS-C53483.2021.00050
D Ranasinghe Mudiyanse Ralahamillage, D. P. E., Wei, F., Shan, G., Albalghiti, E., Zeng, X. & Li, J. (2019).
Examining the Temporal Demand and Sustainability of Copper in China.
Environmental Science and Technology,
53(23), 13812–13821.
https://doi.org/10.1021/acs.est.9b03875
Volk, M., Yuksel, O., Baran, I., Hattel, J. H., Spangenberg, J.
& Sandberg, M. (2022).
Cost-efficient, automated, and sustainable composite profile manufacture: A review of the state of the art, innovations, and future of pultrusion technologies.
Composites Part B: Engineering,
246, [110135].
https://doi.org/10.1016/j.compositesb.2022.110135
Feng, H., Gomes, C., Gil Arboleda, S., Mikkelsen, P. H., Tola, D., Larsen, P. G. & Sandberg, M. (2022).
Integration Of The Mape-K Loop In Digital Twins. I C. R. Martin, N. Emami, M. J. Blas & R. Rezaee (red.),
Proceedings of the 2022 Annual Modeling and Simulation Conference, ANNSIM (s. 102-113). IEEE.
https://doi.org/10.23919/ANNSIM55834.2022.9859489
Zambrano, V., Mueller-Roemer, J.
, Sandberg, M., Talasila, P., Zanin, D.
, Larsen, P. G., Loeschner, E., Thronicke, W., Pietraroia, D., Landofi, G., Fontana, A., Laspalas, M., Antony, J., Poser, V., Kiss, T., Bergweiler, S., Pena Serna, S., Izquierdo, S., Viejo, I. ... Stork, A. (2022).
Industrial Digitalization in the Industry 4.0 era: Classification, Reuse and Authoring of Digital Models on Digital Twin Platforms.
Array,
14, [100176].
https://doi.org/10.1016/j.array.2022.100176
Kunrath, K., Sørensen, A. S., Kerepecká, P.
& Acharya, K. (2022).
OptiWash: A Constructive Inquiry on Maintenance of Washing Machines as an Everyday Practice. I D. Lockton, S. Lenzi, P. Hekkert, A. Oak, J. Sádaba & P. Lloyd (red.),
DRS2022: Bilbao https://doi.org/10.21606/drs.2022.559
Vernica, T., Lipman, R., Kramer, T., Kwon, S. & Bernstein, W. Z. (2022).
Visualizing Standardized Model-Based Design and Inspection Data in Augmented Reality.
Journal of Computing and Information Science in Engineering,
22(4), [041001].
https://doi.org/10.1115/1.4053154
Böttjer, T., Ørnskov Rønsch, G.
, Gomes, C., Ramanujan, D., Iosifidis, A. & Larsen, P. G. (2021).
Data-Driven Identification of Remaining Useful Life for Plastic Injection Moulds. I A-L. Andersen, R. Andersen, T. D. Brunoe, M. Stoettrup Schioenning Larsen, K. Nielsen, A. Napoleone & S. Kjeldgaard (red.),
Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems: Proceedings
of the Changeable, Agile, Reconfigurable and Virtual Production
Conference and the World Mass Customization & Personalization
Conference (s. 431-439). Springer. Lecture Notes in Mechanical Engineering
https://doi.org/10.1007/978-3-030-90700-6_49
Yuksel, O.
, Sandberg, M., Hattel, J. H., Akkerman, R. & Baran, I. (2021).
Mesoscale Process Modeling of a Thick Pultruded Composite with Variability in Fiber Volume Fraction.
Materials,
14(13), [3763].
https://doi.org/10.3390/ma14133763
Feng, H., Gomes, C., Thule, C., Lausdahl, K., Sandberg, M. & Larsen, P. G. (2021).
The Incubator Case Study for Digital Twin Engineering. ArXiv.
https://arxiv.org/pdf/2102.10390.pdf
Sandberg, M., Yuksel, O., Baran, I., Spangenberg, J. & Hattel, J. H. (2021).
Steady-state modelling and analysis of process-induced stress and deformation in thermoset pultrusion processes.
Composites Part B: Engineering,
216, [108812].
https://doi.org/10.1016/j.compositesb.2021.108812
Yuksel, O.
, Sandberg, M., Baran, I., Ersoy, N., Hattel, J. H. & Akkerman, R. (2021).
Material characterization of a pultrusion specific and highly reactive polyurethane resin system: Elastic modulus, rheology, and reaction kinetics.
Composites Part B: Engineering,
207, [108543].
https://doi.org/10.1016/j.compositesb.2020.108543
Sandberg, M., Yuksel, O., Baran, I., Hattel, J. H. & Spangenberg, J. (2021).
Numerical and experimental analysis of resin-flow, heat-transfer, and cure in a resin-injection pultrusion process.
Composites Part A: Applied Science and Manufacturing,
143, [106231].
https://doi.org/10.1016/j.compositesa.2020.106231