Publications by Design and Manufacturing

Are you looking for publications by Section of Design and Manufacturing? On this page you can find all the publications made by the Section of Design and Manufacturing - Department of Mechanical and Production Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Glisic, M., Møller, C., Veluri, B. & Ramanujan, D. (2024). Digital Process Passport: A Conceptual Model for Information Collection and Sharing In Sustainable Manufacturing. Procedia CIRP, 130, 1077-1083. https://doi.org/10.1016/j.procir.2024.10.209

Glisic, M., Veluri, B. & Ramanujan, D. (2024). A Bottom-Up Methodology for Identifying Key Performance Indicators for Sustainability Monitoring of Unit Manufacturing Processes. Sustainability, 16(2). https://doi.org/10.3390/su16020806

Fontana, A., Sorlini, M., Leone, D., Rossi, L., Dell’Ambrogio, S., Nika, J., Koppelaar, R., Pamidi, S., Ramanujan, D. & Formentini, G. (2024). An Integrated Life Cycle Sustainability Assessment Framework for Product Life Cycle-Oriented Decision-Making. In A. I. I. Stefanakis & I. E. Nikolaou (Eds.), Circular Economy and Sustainable Development: A Necessary Nexus for a Sustainable Future (pp. 289–317). Springer. https://doi.org/10.1007/978-3-031-66007-8_17

Borbolla Muñoz, A., Nezar Aboujarra, M. & Ramanujan, D. (2024). Investigating Sustainable Production Planning of an Industrial Progressive Die Stamping Process Using Discrete Event Simulation. In ASME 2024 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 29th Design for Manufacturing and the Life Cycle Conference (DFMLC) (Vol. 5). Article DETC2024-143648, V005T05A006 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2024-143648

Hejlskov Hansen, M., Vernica, T., Mansour, R. & Ramanujan, D. (2024). Three-Dimensional Visualization of Energy Consumption Data in Additive Manufacturing. In ASME 2024 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 44th Computers and Information in Engineering Conference (CIE) (Vol. 2A). Article DETC2024-143405, V02AT02A046 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2024-143405

Strack, D., Manohar Rayudu, N., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2024). OPTIMIZING PATIENT-SPECIFIC BONE FINITE ELEMENT ANALYSIS: MESH CONVERGENCE AND MATERIAL GROUPING STRATEGIES. Orthopaedic Proceedings, 127. https://doi.org/10.1302/1358-992X.2024.18.127

Strack, D., Mesbah, M., Manohar Rayudu, N., Baum, T., Kirschke , J. S. & Karupppasamy, S. (2024). IMPACT OF ANNULUS FIBROSUS STIFFNESS ON THE FRACTURE LOAD OF FUNCTIONAL SPINE UNITS. Orthopaedic Proceedings, 102. https://doi.org/10.1302/1358-992X.2024.18.102

Kunrath, K., Leka, S., Vestergaard, L. S., Presser, M. & Ramanujan, D. (2024). A Digital Tool for Scaffolding Innovation Learning in Engineering Education with Local Industry Needs. International Journal of Engineering Education, 40(4), 801-814.

Oakes, B. J., Zhang, H., Hatledal, L. I., Feng, H., Frasheri, M., Sandberg, M., Gil Arboleda, S. & Gomes, C. (2024). Case Studies in Digital Twins. In J. Fitzgerald, C. Gomes & P. G. Larsen (Eds.), The Engineering of Digital Twins (pp. 257-310). Springer. https://doi.org/10.1007/978-3-031-66719-0_12

Abbiati, G., Gomes, C., Sandberg, M., Kazemi, Z., Hansen, S. T. & Larsen, P. G. (2024). Modelling for Digital Twins. In J. Fitzgerald, C. Gomes & P. G. Larsen (Eds.), The Engineering of Digital Twins (pp. 89-127). Springer. https://doi.org/10.1007/978-3-031-66719-0_5

Šeta, B., Sandberg, M., Brander, M., Mollah, M. T., Pokkalla, D. K., Kumar, V. & Spangenberg, J. (2024). Numerical modeling of fiber orientation in multi-layer, isothermal material-extrusion big area additive manufacturing. Additive Manufacturing, 92, Article 104396. https://doi.org/10.1016/j.addma.2024.104396

Wang, C., Cong, D., Tang, G., Zhou, X. & Li, J. (2024). Improving thermoelectric properties in double half-Heusler M₈Fe_xNi_8−xSb₈ (M = TiZrHfNb)-InSb compounds via synergistic multiscale defects and high-mobility carrier injection. Chemical Engineering Journal, 496, Article 154313. https://doi.org/10.1016/j.cej.2024.154313

Sutton, M., Daniels, J., Masoudi, N., Gorsich, D. & Turner, C. (2024). Approaches for exploration, analysis, and visualization of tradespace for engineering decision-making. Proceedings of the Design Society , 4, 3023-3032. https://doi.org/10.1017/pds.2024.306

Formentini, G., Martiny, T. A., Møller, C., Vernica, T. & Ramanujan, D. (2024). Assessing the disassembly performance of washing machines through the design for circular disassembly methodology. Proceedings of the Design Society , 4, 1249-1258. https://doi.org/10.1017/pds.2024.127

Subasic, M., Ireland, A., Mansour, R., Enblom, P., Krakhmalev, P., Åsberg, M., Fazi, A., Gårdstam, J., Shipley, J., Waernqvist, P., Forssgren, B. & Efsing, P. (2024). Experimental investigation and numerical modelling of the cyclic plasticity and fatigue behavior of additively manufactured 316 L stainless steel. International Journal of Plasticity, 176, Article 103966. https://doi.org/10.1016/j.ijplas.2024.103966

Velu, R., Karupppasamy, S. & Kumar Subramaniyan, A. K. (Eds.) (2024). Digital Design and Manufacturing of Medical Devices and Systems. (1 ed.) Springer. https://doi.org/10.1007/978-981-99-7100-8

Alzweighi, M., Mansour, R., Maass, A., Hirn, U. & Kulachenko, A. (2023). Predicting moisture penetration dynamics in paper with machine learning approach. International Journal of Solids and Structures, 288, Article 112602. https://doi.org/10.1016/j.ijsolstr.2023.112602

Subasic, M., Olsson, M., Dadbakhsh, S., Zhao, X., Krakhmale, P. & Mansour, R. (2024). Fatigue strength improvement of additively manufactured 316L stainless steel with high porosity through preloading. International Journal of Fatigue, 180, Article 108077. https://doi.org/10.1016/j.ijfatigue.2023.108077

Karupppasamy, S., Singh, S., Ćuković, S., Sandhu, K., Meixner, G. & Petruse, R. E. (Eds.) (2024). Smart VR/AR/MR Systems for Professionals. CRC Press.

Frandsen, L. N., Kristensen, C. K., Haahr-Lillevang, L., Klingaa, C. G., Mohanty, S. & Pedersen, M. M. (2023). A method for developing predictive models of quality metrics and gas flow variables for 316L PBF-LB/M printed components based on image analysis. In C. Nisbet, D. Phillips & O. Riemer (Eds.), European Society for Precision Engineering and Nanotechnology, Conference Proceedings: Copenhagen 2023 (pp. 115-118). Euspen.

Rygg Johnsen, A., Petersen, J. E., Pedersen, M. M. & Yildirim, H. C. (2024). Factors affecting the fatigue strength of additively manufactured Ti-6Al-4V parts. Welding in the World, 68(2), 361-409. https://doi.org/10.1007/s40194-023-01604-5

Aher, G. R., Macedo, H. D., Larsen, P. G. & Ramanujan, D. (2023). Supporting Design for Circular Economy Using Lifecycle Co-Simulation. In ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 28th Design for Manufacturing and the Life Cycle Conference (DFMLC) Article DETC2023-116537, V005T05A006; American Society of Mechanical Engineers. https://doi.org/10.1115/DETC2023-116537

Vernica, T., Aher, G. R., Veluri, B. & Ramanujan, D. (2023). LCAD: A Framework for Coupling Computer-Aided Design and Life Cycle Analysis Visualizations. In ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 28th Design for Manufacturing and the Life Cycle Conference (DFMLC) Article DETC2023-116573, V005T05A007; American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2023-116573

D Ranasinghe Mudiyanse Ralahamillage, D. P. E., Ramanujan, D., Veluri, B., Liu, Q. & Liu, G. (2023). Tracing the multiregional evolution of the global dysprosium demand-supply chain. Resources, Conservation & Recycling, 199, Article 107245. https://doi.org/10.1016/j.resconrec.2023.107245

Alzweighi, M., Tryding, J., Mansour, R., Borgqvist, E. & Kulachenko, A. (2023). Anisotropic damage behavior in fiber-based materials: Modeling and experimental validation. Journal of the Mechanics and Physics of Solids, 181, Article 105430. https://doi.org/10.1016/j.jmps.2023.105430

Böttjer, T., Tola, D., Kakavandi, F., Wewer, C. R., Ramanujan, D., Gomes, C., Larsen, P. G. & Iosifidis, A. (2023). A review of unit level digital twin applications in the manufacturing industry. CIRP Journal of Manufacturing Science and Technology, 45, 162-189. https://doi.org/10.1016/j.cirpj.2023.06.011

Efeoǧlu, A. & Moller, C. (2023). Redesigning design thinking for codesign with nondesigners: a method efficiency perspective. Design Science, 9, Article e14. https://doi.org/10.1017/dsj.2023.11

Bodden, J., Dieckmeyer, M., Sollmann , N., Rühling, S., Prucker, P., T. Löffler, M., Burian, E., Karupppasamy, S., Zimmer, C., Kirschke , J. S. & Baum, T. (2023). Long-term reproducibility of opportunistically assessed vertebral bone mineral density and texture features in routine clinical multi-detector computed tomography using an automated segmentation framework. Quantitative Imaging in Medicine and Surgery (QIMS), 13(9), 5472-5482. https://doi.org/10.21037/qims-23-19

Srinivasan, V., Song, B., Luo, J., Karupppasamy, S., Elara Mohan, R., Blessing, L. & Wood, K. (2023). Do Analogies and Analogical Distance Influence Ideation Outcomes in Engineering Design? In S. Mukherjee, V. Dutt & N. Srinivasan (Eds.), Applied Cognitive Science and Technology: Implications of Interactions Between Human Cognition and Technology (pp. 211–230). Springer. https://doi.org/10.1007/978-981-99-3966-4_13

Vernica, T., Glišić, M., Veluri, B. & Ramanujan, D. (2023). Volumetric mapping and visualization of life cycle assessment results on computer-aided design models. Journal of Cleaner Production, 418, Article 138035. https://doi.org/10.1016/j.jclepro.2023.138035

Binedell, T., Gupta, U., Sithanathan, B., Karupppasamy, S. & Blessing, L. (2023). Mapping lines of non-extension in persons with lower limb amputation to aid comfort-driven prosthetic socket design. Medical Engineering & Physics, 118, Article 104018. https://doi.org/10.1016/j.medengphy.2023.104018

Kumar , R., Sandhu, K., Ranjan, N., Singh, S., Sarkar, P., Karupppasamy, S. & Ramakrishna, S. (2023). Form exploration on different fabrics using material extrusion based additive manufacturing and end users experience. Journal of Manufacturing Processes, 101, 959-973. https://doi.org/10.1016/j.jmapro.2023.06.053

Formentini, G. & Ramanujan, D. (2023). EXAMINING THE ROLE AND FUTURE POTENTIAL OF DESIGN FOR DISASSEMBLY METHODS TO SUPPORT CIRCULAR PRODUCT DESIGN. Proceedings of the Design Society , 3, 1735 - 1744. https://doi.org/10.1017/pds.2023.174

Formentini, G. & Ramanujan, D. (2023). Accounting For Product End-of-Life Status in Disassembly Time Estimation Using Modified Maynard Operation Sequences. Procedia CIRP, 116, 305-311. https://doi.org/10.1016/j.procir.2023.02.052

Aher, G. R., Boudjadar, J. & Ramanujan, D. (2023). Towards Simulation-Based Circular Product Design. Procedia CIRP, 116, 690-695. https://doi.org/10.1016/j.procir.2023.02.116

Formentini, G. & Ramanujan, D. (2023). Design for circular disassembly: Evaluating the impacts of product end-of-life status on circularity through the parent-action-child model. Journal of Cleaner Production, 405, Article 137009. https://doi.org/10.1016/j.jclepro.2023.137009

D Ranasinghe Mudiyanse Ralahamillage, D. P. E., Veluri, B., Ramanujan, D. & Liu, G. (2023). Examining three decades of global dysprosium supply chain through a material flow analysis. In First IRTC conference: Raw materials for a sustainable future (pp. 20)

Sandberg, M., Hattel, J. H. & Spangenberg, J. (2023). Flow‑Induced Fibre Compaction in Resin‑Injection Pultrusion. Transport in Porous Media, 147(3), 541-571. https://doi.org/10.1007/s11242-023-01911-x

Ramanujan, D., Bernstein, W. Z., Diaz-Elsayed, N. & R. Haapala, K. (2023). The Role of Industry 4.0 Technologies in Manufacturing Sustainability Assessment. Journal of Manufacturing Science and Engineering, 145(1), Article 010801. https://doi.org/10.1115/1.4055661

Feng, H., Gomes, C., Sandberg, M., Macedo, H. D. & Larsen, P. G. (2022). Under What Conditions Does a Digital Shadow Track a Periodic Linear Physical System? In A. Cerone, M. Autili, A. Bucaioni, C. Gomes, P. Graziani, M. Palmieri, M. Temperini & G. Venture (Eds.), Software Engineering and Formal Methods. SEFM 2021 Collocated Workshops - CIFMA, CoSim-CPS, OpenCERT, ASYDE, Revised Selected Papers (pp. 143-155). Springer. https://doi.org/10.1007/978-3-031-12429-7_11

Feng, H., Gomes, C., Sandberg, M., Thule, C., Lausdahl, K. & Larsen, P. G. (2021). Developing a Physical and Digital Twin: An Example Process Model. In Companion Proceedings - 24th International Conference on Model-Driven Engineering Languages and Systems, MODELS-C 2021 (pp. 286-295). IEEE. https://doi.org/10.1109/MODELS-C53483.2021.00050

Volk, M., Yuksel, O., Baran, I., Hattel, J. H., Spangenberg, J. & Sandberg, M. (2022). Cost-efficient, automated, and sustainable composite profile manufacture: A review of the state of the art, innovations, and future of pultrusion technologies. Composites Part B: Engineering, 246, Article 110135. https://doi.org/10.1016/j.compositesb.2022.110135

Feng, H., Gomes, C., Gil Arboleda, S., Mikkelsen, P. H., Tola, D., Larsen, P. G. & Sandberg, M. (2022). Integration Of The Mape-K Loop In Digital Twins. In C. R. Martin, N. Emami, M. J. Blas & R. Rezaee (Eds.), Proceedings of the 2022 Annual Modeling and Simulation Conference, ANNSIM (pp. 102-113). IEEE. https://doi.org/10.23919/ANNSIM55834.2022.9859489

Mirzaiee, R., Vernica, T., Scheuringer, K. & Bernstein, W. Z. (2022). Towards Retargetable Animations for Industrial Augmented Reality. In Proceedings - 2022 IEEE Conference on Virtual Reality and 3D User Interfaces Abstracts and Workshops, VRW 2022 (pp. 872-873). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/VRW55335.2022.00287

Glisic, M., Sarfraz, S., Veluri, B. & Ramanujan, D. (2022). A Systematic Framework for Quantifying Production System-Specific Challenges in Life Cycle Inventory Data Collection. Procedia CIRP, 105, 210-218. https://doi.org/10.1016/j.procir.2022.02.035

Szemeti, G. & Ramanujan, D. (2022). An Empirical Benchmark for Resource Use in Fused Deposition Modelling 3D Printing of Isovolumetric Mechanical Components. Procedia CIRP, 105, 183-191. https://doi.org/10.1016/j.procir.2022.02.030

Bibbo, N., Arora, V. & Pedersen, M. M. (2021). Comparison of Findley and MWCM multiaxial fatigue methods using the notch stress method on welded joints. In Procedia Structural Integrity (Vol. 31, pp. 75-79). Elsevier. https://doi.org/10.1016/j.prostr.2021.03.012

Zambrano, V., Mueller-Roemer, J., Sandberg, M., Talasila, P., Zanin, D., Larsen, P. G., Loeschner, E., Thronicke, W., Pietraroia, D., Landofi, G., Fontana, A., Laspalas, M., Antony, J., Poser, V., Kiss, T., Bergweiler, S., Pena Serna, S., Izquierdo, S., Viejo, I. ... Stork, A. (2022). Industrial Digitalization in the Industry 4.0 era: Classification, Reuse and Authoring of Digital Models on Digital Twin Platforms. Array, 14, Article 100176. https://doi.org/10.1016/j.array.2022.100176

Pedersen, M. M. (2015). Fatlab: Free open-source fatigue analysis software. http://www.fatiguetoolbox.org

Revised 19.12.2023

AU Engineering