Institut for Mekanik og Produktion

Aarhus Universitets segl
Du er her: Institut for Mekanik og Produktion Forskning Publikationer

Publikationer

Her finder du en samlet liste over de publikationer, som er lavet af medarbejdere ved Institut for Mekanik og Produktion for eksempel tidsskriftsartikler, bøger, rapporter m.v.

Publikationsliste

Sortér efter: Dato | Forfatter | Titel

Zhu, J., Xiao, J., Zhou, Q. & Aghababaei, R. (2024). Effect of grain boundary on scratch behavior of polycrystalline copper. International Journal of Mechanical Sciences, 272, Artikel 109175. https://doi.org/10.1016/j.ijmecsci.2024.109175
Faldella, F., Kim, T., Doll, U. & Jansohn, P. (2024). Effect of pressure and H2 content on global consumption-based turbulent flame speed at gas turbine relevant conditions. International Journal of Hydrogen Energy, 81, 842-851. https://doi.org/10.1016/j.ijhydene.2024.07.282
Malekan, M., Ilvig, C. F. & Aghababaei, R. (2024). Effects of Edge Radius and Coating Thickness on the Cutting Performance of AlCrN-Coated Tool. International Journal of Precision Engineering and Manufacturing, 25(10), 2059-2075. https://doi.org/10.1007/s12541-024-01074-9
Si, G., Zhang, H., Zhang, Z. & Zhang, X. (2024). Enabling intuitive and effective micromanipulation: A wearable exoskeleton-integrated macro-to-micro teleoperation system with a 3D electrothermal microgripper. Robotics and Autonomous Systems, 181, Artikel 104776. https://doi.org/10.1016/j.robot.2024.104776
Bazmohammadi, N., Madary, A., Bazmohmmadi, S., Quintero, J. C. V. & Guerrero, J. M. (2024). Energy Management of a Zero-Emission Hybrid FC/Battery/Ultracapacitor Ship Using Model Predictive Control. Abstract fra The International Conference on Modeling and Simulation of Electric Machines, Converters and Systems (Electrimacs 2024).
Gøtske, E. K. (2024). Energy storage and climate impacts on the future renewable European energy system. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus University.
Fulco , S., Budzik, M. K. & T. Turner , K. T. (2024). Enhancing toughness through geometric control of the process zone. Journal of the Mechanics and Physics of Solids, 184, Artikel 105548. https://doi.org/10.1016/j.jmps.2024.105548
Palade, D., Møller, C. & Hansen, A. K. (2024). Enterprise Integration as a Driving Factor for Guiding Digitalization in a Manufacturing Small and Medium Enterprise. Complex Systems Informatics and Modeling Quarterly, 2024(39), 48-64. https://doi.org/10.7250/csimq.2024-39.03
Arumugam, V. K., Mantzaras, J., Gantenbein, A., Doll, U. & Schildhauer, T. (2024). Experimental and numerical investigation of high-pressure methane catalytic synthesis from H2 and CO2. Proceedings of the Combustion Institute, 40(1-4), Artikel 105206. https://doi.org/10.1016/j.proci.2024.105206
Subasic, M., Ireland, A., Mansour, R., Enblom, P., Krakhmalev, P., Åsberg, M., Fazi, A., Gårdstam, J., Shipley, J., Waernqvist, P., Forssgren, B. & Efsing, P. (2024). Experimental investigation and numerical modelling of the cyclic plasticity and fatigue behavior of additively manufactured 316 L stainless steel. International Journal of Plasticity, 176, Artikel 103966. https://doi.org/10.1016/j.ijplas.2024.103966
Ghasemi, A., Sadough Vanini, S. A., Alizadeh Zolbin, M. & Aghababaei, R. (2024). Exploring the influence of ultrasonic peening treatment at ambient and cryogenic conditions on the surface characteristics and fatigue life of austenitic stainless steel 304L. Surface and Coatings Technology, 494(Part 1 ), Artikel 131382. https://doi.org/10.1016/j.surfcoat.2024.131382
Islam, R., Madsen, S. P. & Christensen, M. (2024). Exploring the magnetic properties of W-type SrFe18O27 hexaferrite: Insights from a first-principles study. Physical Review B, 109(2), Artikel 024414. https://doi.org/10.1103/PhysRevB.109.024414
Hansen, C., Sørensen, J. N., I. A. Yang, X. & Abkar, M. (2024). Extension of the law of the wall exploiting weak similarity of velocity fluctuations in turbulent channels. Physics of Fluids, 36(1), Artikel 015134. https://doi.org/10.1063/5.0185334
Rygg Johnsen, A., Petersen, J. E., Pedersen, M. M. & Yildirim, H. C. (2024). Factors affecting the fatigue strength of additively manufactured Ti-6Al-4V parts. Welding in the World, 68(2), 361-409. https://doi.org/10.1007/s40194-023-01604-5
Bokharaie, B.-U., Aghababaei, R., Dias, M. A. & Budzik, M. K. (2024). Failure of 3D-printed composite continuous carbon fibre hexagonal frames. Composites Part B: Engineering, 275, Artikel 111307. https://doi.org/10.1016/j.compositesb.2024.111307
Subasic, M., Olsson, M., Dadbakhsh, S., Zhao, X., Krakhmale, P. & Mansour, R. (2024). Fatigue strength improvement of additively manufactured 316L stainless steel with high porosity through preloading. International Journal of Fatigue, 180, Artikel 108077. https://doi.org/10.1016/j.ijfatigue.2023.108077
Rincón, M. J., Caspersen, A., Thorenfeldt Ingwersen, N., Reclari, M. & Abkar, M. (2024). Flow investigation of two-stand ultrasonic flow meters in a wide dynamic range by numerical and experimental methods. Flow Measurement and Instrumentation, 96, Artikel 102543. https://doi.org/10.1016/j.flowmeasinst.2024.102543
Sahli, R., Mikkelsen, J., Boye, M. S., Dias, M. A. & Aghababaei, R. (2024). Frictional Contact of Soft Polymeric Shells. Physical Review Letters, 133(10), Artikel 106202. https://doi.org/10.1103/PhysRevLett.133.106202
Alvandifar, N., Kristofersson, J. & Forooghi, P. (2024). Frost formation non-uniformity in a multi-circuit V-shape evaporator. International Journal of Refrigeration, 157, 137-149. https://doi.org/10.1016/j.ijrefrig.2023.10.018
Nguyen, V. H., Oh, S., Mahato, M., Tabassian, R., Yoo, H., Lee, S. G., Garai, M., Kim, K. J. & Oh, I. K. (2024). Functionally antagonistic polyelectrolyte for electro-ionic soft actuator. Nature Communications, 15(1), Artikel 435. https://doi.org/10.1038/s41467-024-44719-z
Hu, P., Dias, M. A. & Budzik, M. K. (2024). Geometric tunability of interlaminar resistance. Composites Part B: Engineering, 287, Artikel 111839. https://doi.org/10.1016/j.compositesb.2024.111839
Wu, Z. & Møller, C. (2024). Global Sales and Operations Planning: exploring transitional pathway from a fit perspective. IFAC-PapersOnLine, 58(27), 1200-1209.
Farah, S. (2024). Green hydrogen production: cost and CO2 emissions co-optimisation. 172-176. Poster-session præsenteret på Aarhus Power-to-X Symposium 2024, Aarhus, Danmark. https://doi.org/10.1049/icp.2024.1834
I. A. Yang, X., Abkar, M. & I. Park, G. (2024). Grid Convergence Properties of Wall-Modeled Large Eddy Simulations in the Asymptotic Regime. Journal of Fluids Engineering, Transactions of the ASME, 146(8), Artikel 081501. https://doi.org/10.1115/1.4064850
I. A. Yang, X. & Abkar, M. (2024). Grid Convergence Properties of Wall-Modeled Large-Eddy Simulations in the Asymptotic Regime. I ASME 2023 International Mechanical Engineering Congress and Exposition: Fluids Engineering (Bind 9). Artikel IMECE2023-116581, V009T10A017 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/IMECE2023-116581
Almskou, T. & Olesen, P. H. (2024). Grundrids af teknisk tegning. (6. udg.) Akademisk Forlag.
Lubineau, G., Alfano, M., Tao, R., Wagih, A., Yudhanto, A., Li, X., Almuhammadi, K., Hashem, M., Hu, P., Mahmoud, H. A. & Oz, F. (2024). Harnessing Extrinsic Dissipation to Enhance the Toughness of Composites and Composite Joints: A State-of-the-Art Review of Recent Advances. Advanced Materials, 36(51), Artikel 2407132. https://doi.org/10.1002/adma.202407132
singh, G., Mitra, T., Madsen, S. P. & Dantan, A. R. (2024). Highly reflective and high-Q thin resonant subwavelength gratings. Journal of Physics: Photonics, 6(4), Artikel 045009. https://doi.org/10.1088/2515-7647/ad70e7
Islam, R., Vero, K. & Borah, J. P. (2024). Historical overview and recent advances in permanent magnet materials. Materials Today Communications, 41, Artikel 110538. https://doi.org/10.1016/j.mtcomm.2024.110538
Strack, D., Mesbah, M., Manohar Rayudu, N., Baum, T., Kirschke , J. S. & Karupppasamy, S. (2024). IMPACT OF ANNULUS FIBROSUS STIFFNESS ON THE FRACTURE LOAD OF FUNCTIONAL SPINE UNITS. Orthopaedic Proceedings, 102. https://doi.org/10.1302/1358-992X.2024.18.102
Wang, C., Cong, D., Tang, G., Zhou, X. & Li, J. (2024). Improving thermoelectric properties in double half-Heusler M8FexNi8−xSb8 (M = TiZrHfNb)-InSb compounds via synergistic multiscale defects and high-mobility carrier injection. Chemical Engineering Journal, 496, Artikel 154313. https://doi.org/10.1016/j.cej.2024.154313
Ma, L., Nemati, N., Kim, D. E. & Aghababaei, R. (2024). Interface Amorphization Controls Maximum Wear Resistance of Multinanolayer DLC/WC Coatings. ACS Applied Materials and Interfaces, 16(14), 18090-18098. https://doi.org/10.1021/acsami.3c18218
Borbolla Muñoz, A., Nezar Aboujarra, M. & Ramanujan, D. (2024). Investigating Sustainable Production Planning of an Industrial Progressive Die Stamping Process Using Discrete Event Simulation. I 29th Design for Manufacturing and the Life Cycle Conference (DFMLC): 29th Design for Manufacturing and the Life Cycle Conference (DFMLC) (Bind 5). Artikel V005T05A006 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2024-143648
Jensen, J. S. K. (2024). Investigation of three-body abrasive sand wear in submersible pumps. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus University.
Farah, S. & Bruun Andresen, G. (2024). Investment-based optimisation of energy storage design parameters in a grid-connected hybrid renewable energy system. Applied Energy, 355, Artikel 122384. https://doi.org/10.1016/j.apenergy.2023.122384
Ulriksen, M. D. & Bernal, D. (2024). Localization of earthquake-induced structural damage using output feedback eigenstructure assignment. I 18th World Conference on Earthquake Engineering (WCEE2024) (Bind 2024)
Tabassian, R., Rajabi-Abhari, A., Mahato, M., Yoo, H., Yoon, H. Y., Park, J. Y. & Oh, I. K. (2024). Metal-organic framework-based nanofibrous film for two different modes of triboelectric nanogenerators. SmartMat, 5(5), Artikel e1270. https://doi.org/10.1002/smm2.1270
Tørring, P. & Vestergaard, J. B. (2024). Metanol i Fiskeriet: Milepælsrapport . Aquamind A/S.
Wieber, C., Jeppesen, M. R., Finster, K., Melvad, C. & Santl-Temkiv, T. (2024). Micro-PINGUIN: microtiter-plate-based instrument for ice nucleation detection in gallium with an infrared camera. Atmospheric Measurement Techniques, 17(9), 2707–2719. https://doi.org/10.5194/amt-17-2707-2024
Alamia, A. & Bruun Andresen, G. (2024). Modelling Alternatives for integrted PtX infrastrcture between Denmark and EU. Poster-session præsenteret på 12th European Open Energy Modelling Workshop, Grenoble, Frankrig.
Abbiati, G., Gomes, C., Sandberg, M., Kazemi, Z., Hansen, S. T. & Larsen, P. G. (2024). Modelling for Digital Twins. I J. Fitzgerald, C. Gomes & P. G. Larsen (red.), The Engineering of Digital Twins (s. 89-127). Springer. https://doi.org/10.1007/978-3-031-66719-0_5
Ninno, F., Chiastra, C., Colombo, M., Dardik, A., Strosberg, D., Aboian, E., Tsui, J., Bartlett, M., Balabani, S. & Díaz-Zuccarini, V. (2024). Modelling lower-limb peripheral arterial disease using clinically available datasets: impact of inflow boundary conditions on hemodynamic indices for restenosis prediction. Computer Methods and Programs in Biomedicine, 251, Artikel 108214. https://doi.org/10.1016/j.cmpb.2024.108214
Moon, J., Mahravan, E. & Kim, D. (2024). Mutual interaction of a collapsing bubble and a nearby viscoelastic solid. Physical Review Fluids, 9(4), Artikel 043603. https://doi.org/10.1103/PhysRevFluids.9.043603
Mitra, T., singh, G., Darki, A. A., Madsen, S. P. & Dantan, A. R. (2024). Narrow-linewidth Fano microcavities with resonant subwavelength grating mirror. Optics Express, 32(9), 15667-15679. https://doi.org/10.1364/OE.521329
Sadik, S. & Yavari, A. (2024). Nonlinear anisotropic viscoelasticity. Journal of the Mechanics and Physics of Solids, 182, Artikel 105461. https://doi.org/10.1016/j.jmps.2023.105461
Sujon, M. A. S., Masato, D., Andriollo, T., Pan, Z., Nadimpalli, V. K., Henriquez, V. C. & Islam, A. (2024). Novel approach for optimizing mechanical and damping performance of MABS composites reinforced with basalt fibers: An experimental study. Composites Science and Technology, 251, Artikel 110578. https://doi.org/10.1016/j.compscitech.2024.110578
Zheng, W., Ma, L., Pei, S. & Aghababaei, R. (2024). Numerical assessment of transition in cutting mode and its effect on roughness creation. International Journal of Mechanical Sciences, 261, Artikel 108666. https://doi.org/10.1016/j.ijmecsci.2023.108666
Šeta, B., Sandberg, M., Brander, M., Mollah, M. T., Pokkalla, D. K., Kumar, V. & Spangenberg, J. (2024). Numerical modeling of fiber orientation in multi-layer, isothermal material-extrusion big area additive manufacturing. Additive Manufacturing, 92, Artikel 104396. https://doi.org/10.1016/j.addma.2024.104396
Langthjem, M. A. & Jensen, H. M. (2024). On matched asymptotic expansion solutions of a bucklewave propagation problem. Zeitschrift fuer Angewandte Mathematik und Mechanik, 104(5), 1. Artikel e202300655. https://doi.org/10.1002/zamm.202300655
E.F. Athanasiadis, A., Budzik, M. K., Fernando, D. & Dias, M. A. (2024). On micropolar elastic foundations. European Journal of Mechanics A - Solids, 105, Artikel 105277. https://doi.org/10.1016/j.euromechsol.2024.105277

Viser resultater 201 til 250 ud af 559

Forrige

1

2

3

4

5

6

7

8

9

10

Næste

Revideret 22.02.2024
-
Institut for Mekanik og Produktion