Publikationer

Her finder du en samlet liste over de publikationer, som er lavet af medarbejdere ved Institut for Mekanik og Produktion for eksempel tidsskriftsartikler, bøger, rapporter m.v.

Publikationsliste

Sortér efter: Dato | Forfatter | Titel

Cremoncini, D., Frate, G. F., Bischi, A., Pedersen, T. T., Bruun Andresen, G., Bentien, A. & Ferrari, L. (2024). Optimal participation of a wind and hybrid battery storage system in the day-ahead and automatic frequency restoration reserve markets. Journal of Energy Storage, 94, Artikel 112309. https://doi.org/10.1016/j.est.2024.112309

Alamia, A., Partoon, B., Rattigan, E. & Bruun Andresen, G. (2024). Optimizing hydrogen and e-methanol production through Power-to-X integration in biogas plants. Energy Conversion and Management, 322, Artikel 119175. https://doi.org/10.1016/j.enconman.2024.119175

Strack, D., Manohar Rayudu, N., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2024). OPTIMIZING PATIENT-SPECIFIC BONE FINITE ELEMENT ANALYSIS: MESH CONVERGENCE AND MATERIAL GROUPING STRATEGIES. Orthopaedic Proceedings, 127. https://doi.org/10.1302/1358-992X.2024.18.127

Garg, H., Ledda, P. G., Skov Pedersen, J. & Pezzulla, M. (2024). Passive Viscous Flow Selection via Fluid-Induced Buckling. Physical Review Letters, 133(8), Artikel 084001. https://doi.org/10.1103/PhysRevLett.133.084001

Ulriksen, M. D., Greś, S. & Bernal, D. (2024). Perturbation-invariant eigenvalue assignment for statistical damage localization. Journal of Physics: Conference Series, 2647, Artikel 192017. https://doi.org/10.1088/1742-6596/2647/19/192017

Calafà, M., Hovad, E., Engsig-Karup, A. P. & Andriollo, T. (2024). Physics-Informed Holomorphic Neural Networks (PIHNNs): Solving 2D linear elasticity problems. Computer Methods in Applied Mechanics and Engineering, 432, Artikel 117406. https://doi.org/10.1016/j.cma.2024.117406

Alzweighi, M., Mansour, R., Maass, A., Hirn, U. & Kulachenko, A. (2024). Predicting moisture penetration dynamics in paper with machine learning approach. International Journal of Solids and Structures, 288, Artikel 112602. https://doi.org/10.1016/j.ijsolstr.2023.112602

Kirikova, M., Forbrig, P. & Møller, C. (2024). Preface: 9thWorkshop on Managed Complexity (ManComp). I Joint Proceedings of the BIR 2024 Workshops and Doctoral Consortium co-located with 23rd International Conference on Perspectives in Business Informatics Research (BIR 2024) (Bind 3804). CEUR-WS.org.

Jensen, H. M. (2024). Propagating instabilities in solids. I ICTAM2024: Abstract Book (s. 48-51). International Congress of Theoretical and Applied Mechanics.

Bernal, D. & Ulriksen, M. D. (2024). Quadratic basis pursuit in model updating of underconstrained problems. Journal of Physics: Conference Series, 2647(25), Artikel 252001. https://doi.org/10.1088/1742-6596/2647/25/252001

Zhang, Z., Chai, X., Si, G. & Zhang, X. (2024). Quantifying Variability in Zebrafish Larvae Locomotor Behavior across Experimental Conditions: A Learning-Based Tracker. Fishes, 9(6), Artikel 193. https://doi.org/10.3390/fishes9060193

Asghari, M., Ivetich, S. D., Aslan, M. K., Aramesh, M., Melkonyan, O., Meng, Y., Xu, R., Colombo, M., Weiss, T., Balabanov, S., Stavrakis, S. & deMello, A. J. (2024). Real-time viscoelastic deformability cytometry: High-throughput mechanical phenotyping of liquid and solid biopsies. Science Advances, 10(49), Artikel eabj1133. https://doi.org/10.1126/sciadv.abj1133

Rajabi-Abhari, A., Yoo, H., Kim, J.-S., Yoon, H. Y., Park, J. Y., Yan, N., Tabassian, R. & Oh, I.-K. (2024). Reversibly Compressible Silanated Cellulose Nanofibril Aerogel for Triboelectric Taekwondo Scoring Sensors. Small, 20(50), Artikel 2405664. https://doi.org/10.1002/smll.202405664

Rincón, M. J. (2024). Robust Optimisation of Ultrasonic Flow Meters by Computational Fluid Dynamics and Enhanced Turbulence Modelling. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus University. https://doi.org/10.7146/aul.508

Zehtabiyan-Rezaie, N., Amarloo, A. & Abkar, M. (2024). Secondary flows in the actuator-disk simulation of wind-turbine wakes. Physics of Fluids, 36(4), Artikel 045142 . https://doi.org/10.1063/5.0203068

Migliorini, M., Zachos, P. K., Macmanus, D. G., Doll, U., Dues, M., Steinbock, J., Dues, F., Siswanto, A., Melnikov, S. M. & Röhle, I. (2024). Seeding-free inlet flow distortion measurements using filtered Rayleigh scattering: integration in a complex intake test facility. Afhandling præsenteret på AIAA SciTech Forum and Exposition, 2024, Orlando, USA. https://doi.org/10.2514/6.2024-2831

Paraskevoulakos, C., Ghosh, S., Andriollo, T. & Michel, A. (2024). Sensitivity Study Using Synthetic 3D Image Datasets to Investigate the Effect of Noise Artefacts on Digital Volume Correlation. Experimental Mechanics, 64(5), 595-624. https://doi.org/10.1007/s11340-024-01046-0

Karupppasamy, S., Singh, S., Ćuković, S., Sandhu, K., Meixner, G. & Petruse, R. E. (red.) (2024). Smart VR/AR/MR Systems for Professionals. CRC Press. https://doi.org/10.1201/9781003306078

Rahdan, P., Zeyen, E. & Victoria, M. (2024). Strategic deployment of solar photovoltaics for achieving self-sufficiency in Europe throughout the energy transition. https://arxiv.org/pdf/2410.19440

Pedersen, M. T., Vilgis, T. A., Brewer, J. R., Hansen, P. L. & Clausen, M. P. (2024). Structural characterization of solvent-based food preparation of jellyfish. Soft Matter, 20(3), 495-510. https://doi.org/10.1039/d3sm00620d

De Cunto, L. O., Sadik, S. & Kirkegaard, P. H. (2024). Surrogate modeling of springback in thermoformed foam cores. Poster-session præsenteret på The 19th European Mechanics of Materials Conferences (EMMC), Madrid, Spanien.

Barvenik, K., Coogan, Z., Librandi, G., Pezzulla, M. & Tubaldi, E. (2024). Tactile Sensing and Grasping Through Thin-Shell Buckling. Advanced Intelligent Systems , 6(9), Artikel 2300855. https://doi.org/10.1002/aisy.202300855

Nitschke, I., Sadik, S. & Voigt, A. (2024). Tangential Tensor Fields on Deformable Surfaces – How to Derive Consistent L²-Gradient Flows. IMA Journal of Applied Mathematics, 88(6), 917-958. https://doi.org/10.1093/imamat/hxae006

Bernal, D. & Ulriksen, M. D. (2024). The Basis Pursuit as a Set Selector. I C. Rainieri, C. Gentile & M. Aenlle López (red.), Proceedings of the 10th International Operational Modal Analysis Conference (IOMAC 2024): Volume 2 (Bind 2, s. 357–363). Springer, Cham. https://doi.org/10.1007/978-3-031-61425-5_34

Hejlskov Hansen, M., Vernica, T., Mansour, R. & Ramanujan, D. (2024). Three-Dimensional Visualization of Energy Consumption Data in Additive Manufacturing. I 44th Computers and Information in Engineering Conference (CIE): 44th Computers and Information in Engineering Conference (CIE) (Bind 2A). Artikel V02AT02A046 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2024-143405

L.S. Hedvard, M., Dias, M. A. & Budzik, M. K. (2024). Toughening mechanisms and damage propagation in Architected-Interfaces. International Journal of Solids and Structures, 288, Artikel 112600. https://doi.org/10.1016/j.ijsolstr.2023.112600

Yang, X. (2024). Towards Physical Interaction Control of Collaborative Industrial Robots Augmented with Scientific Machine Learning for SME Productions. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus University.

Doll, U., Kapulla, R., Dues, M., Steinbock, J., Melnikov, S., Röhle, I., Migliorini, M. & K. Zachos, P. (2024). Towards time-resolved multi-property measurements by filtered Rayleigh scattering: diagnostic approach and verification. Experiments in Fluids, 65(1), Artikel 2. https://doi.org/10.1007/s00348-023-03740-6

Doll, U., Kapulla, R., Dues, M., Steinbock, J., Melnikov, S., Röhle, I., Migliorini, M. & K. Zachos, P. (2024). Towards Time-Resolved Multi-Property Measurements By Single-Frequency FRS. I 21th International Symposium on the Application of Laser and Imaging Techniques to Fluid Mechanics https://doi.org/10.55037/lxlaser.21st.19

Zhang, Z., Sun, T., Wang, Z. & Zhang, X. (2024). Trajectory Planning and Performance Atlases of a New Omnidirectional Conveyor. Actuators, 13(11), Artikel 441. https://doi.org/10.3390/act13110441

van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2024). Ultra-tough architected adhesive joints for integrated composite processing and bonding. Composites Part A: Applied Science and Manufacturing, 177, Artikel 107949. https://doi.org/10.1016/j.compositesa.2023.107949

van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2024). Ultra tough architected joints through single manufacturing step. Abstract fra 9th International Conference on Fracture of Polymers, Composites and Adhesives, Schweiz.

Zehtabiyan-Rezaie, N., Perto Justsen, J. & Abkar, M. (2024). Wind-farm power prediction using a turbulence-optimized Gaussian wake model. Wind Energy and Engineering Research, 2, Artikel 100007. https://doi.org/10.1016/j.weer.2024.100007

Gao, X., Zhang, Y., Haahr-Lillevang, L., Vedel-Smith, N. K. & Andriollo, T. (2023). 3D strain pattern in additively manufactured AlSi10Mg from digital volume correlation. Heliyon, 9(12), Artikel e23186. https://doi.org/10.1016/j.heliyon.2023.e23186

Islam, R. & Borah, J. P. (2023). 3d transition metal substituted Fe3Se4: prediction of potential permanent magnet. Journal of Physics: Condensed Matter, 35(32), Artikel 325801. https://doi.org/10.1088/1361-648X/acd319

Alessi, C., Falotico, E. & Lucantonio, A. (2023). Ablation Study of a Dynamic Model for a 3D-Printed Pneumatic Soft Robotic Arm. IEEE Access, 11, 37840-37853. https://doi.org/10.1109/ACCESS.2023.3266282

Formentini, G. & Ramanujan, D. (2023). Accounting For Product End-of-Life Status in Disassembly Time Estimation Using Modified Maynard Operation Sequences. Procedia CIRP, 116, 305-311. https://doi.org/10.1016/j.procir.2023.02.052

Yang, J., Velandia, J., Bansmer, S., Stroh, A. & Forooghi, P. (2023). A comparison of hydrodynamic and thermal properties of artificially generated against realistic rough surfaces. International Journal of Heat and Fluid Flow, 99, Artikel 109093. https://doi.org/10.1016/j.ijheatfluidflow.2022.109093

Frandsen, L. N., Kristensen, C. K., Haahr-Lillevang, L., Klingaa, C. G., Mohanty, S. & Pedersen, M. M. (2023). A method for developing predictive models of quality metrics and gas flow variables for 316L PBF-LB/M printed components based on image analysis. I O. Riemer, C. Nisbet & D. Phillips (red.), European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 23rd International Conference and Exhibition, EUSPEN 2023: Copenhagen 2023 (s. 115-118). Euspen.

Zehtabiyan-Rezaie, N. & Abkar, M. (2023). An extended k- ε model for wind-farm simulation. I 14th International ERCOFTAC Symposium on Engineering Turbulence Modelling and Measurements: Proceedings (s. 373-378)

Alzweighi, M., Tryding, J., Mansour, R., Borgqvist, E. & Kulachenko, A. (2023). Anisotropic damage behavior in fiber-based materials: Modeling and experimental validation. Journal of the Mechanics and Physics of Solids, 181, Artikel 105430. https://doi.org/10.1016/j.jmps.2023.105430

Hansen, C., I.A. Yang, X. & Abkar, M. (2023). A POD-mode-augmented wall model and its applications to flows at non-equilibrium conditions. Journal of Fluid Mechanics, 975, Artikel A24. https://doi.org/10.1017/jfm.2023.857

E. S. Chen, P., Bin, Y., I. A. Yang, X., Shi, Y., Abkar, M. & I. Park, G. (2023). A priori screening of data-enabled turbulence models. Physical Review Fluids, 8(12), Artikel 124606. https://doi.org/10.1103/PhysRevFluids.8.124606

Pardoen, T., T. Turner , K. T. & Budzik, M. K. (2023). Architected adhesive joints with improved fracture toughness. I D. A. Dillard (red.), Advances in Structural Adhesive Bonding (2 udg., s. 1105-1122). Woodhead Publishing. https://doi.org/10.1016/B978-0-323-91214-3.00012-0

Böttjer, T., Tola, D., Kakavandi, F., Wewer, C. R., Ramanujan, D., Gomes, C., Larsen, P. G. & Iosifidis, A. (2023). A review of unit level digital twin applications in the manufacturing industry. CIRP Journal of Manufacturing Science and Technology, 45, 162-189. https://doi.org/10.1016/j.cirpj.2023.06.011

Zehtabiyan-Rezaie, N. & Abkar, M. (2023). A short note on turbulence characteristics in wind-turbine wakes. Journal of Wind Engineering and Industrial Aerodynamics, 240, Artikel 105504. https://doi.org/10.1016/j.jweia.2023.105504

Yang, X., Zhou, Z., Sørensen, J. H., Christensen, C. B., Ünalan, M. & Zhang, X. (2023). Automation of SME production with a Cobot system powered by learning-based vision. Robotics and Computer-Integrated Manufacturing, 83, Artikel 102564. https://doi.org/10.1016/j.rcim.2023.102564

Teixeira de Freitas, S. & Budzik, M. K. (2023). Bondline thickness: Fracture mechanics perspective. I D. A. Dillard (red.), Advances in Structural Adhesive Bonding, Second Edition (2 udg., s. 615-641). Woodhead Publishing. https://doi.org/10.1016/B978-0-323-91214-3.00027-2

Rincón, M. J., Reclari, M., Yang, X. & Abkar, M. (2023). CFD-aided morphing and design optimisation of ultrasonic flow meters. I The 14th International ERCOFTAC Symposium on Engineering Turbulence Modelling and Measurements (s. 109-114) https://www.ercoftac.org/etmm/program/conference-program/

Zhang, B., Endelt, B. & Nielsen, K. B. (2023). Characterization of mechanical properties for tubular materials based on hydraulic bulge test under axial feeding force. Fundamental Research, 3(4), 592-601. https://doi.org/10.1016/j.fmre.2022.01.024

Viser resultater 251 til 300 ud af 559

Forrige

Næste

Revideret 22.02.2024

Institut for Mekanik og Produktion