Find

Til studerende
Til ph.d.er
Til medarbejdere

Institut for Mekanik og Produktion

Publications

Sortér efter: Dato | Forfatter | Titel

Si, G., Chu, M., Zhang, Z., Li, H. & Zhang, X. (2020). Integrating Dynamics into Design and Motion Optimization of a 3-PRR Planar Parallel Manipulator with Discrete Time Transfer Matrix Method. Mathematical Problems in Engineering, 2020, Artikel 2761508. https://doi.org/10.1155/2020/2761508

Song, P., Yu, Y. & Zhang, X. (2017). Impedance Control of Robots: An Overview. I Proceedings - 2017 2nd International Conference on Cybernetics, Robotics and Control, CRC 2017: (CRC) (s. 51-55). IEEE. https://doi.org/10.1109/CRC.2017.20

Thomsen, D. K., Søe-Knudsen, R., Brandt, D., Balling, O. & Zhang, X. (2018). Generating Vibration Free Rest-to-Rest Trajectories for Configuration Dependent Dynamic Systems via 3-Segmented Input Shaping. I 2018 IEEE International Conference on Robotics and Automation, ICRA 2018 (s. 4361-4366). Artikel 8460865 IEEE. https://doi.org/10.1109/ICRA.2018.8460865

Wu, G., Zhang, X., Zhu, L., Lin, Z. & Liu, J. (2021). Fuzzy sliding mode variable structure control of a high-speed parallel PnP robot. Mechanism and Machine Theory, 162, Artikel 104349. https://doi.org/10.1016/j.mechmachtheory.2021.104349

Zhang, X., Mills, J. K. & Cleghorn, W. L. (2009). Flexible linkage structural vibration control on a 3-PRR planar parallel manipulator: Experimental results. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 223(1), 71-84. https://doi.org/10.1243/09596518JSCE594

Zhang, X., Mills, J. K. & L. Cleghom, W. (2010). Experimental Vibration Mode Control of a Moving 3-PRR Flexible Parallel Manipulator with Multiple PZT Implementation on Transducers. Journal of Vibration and Control.

Zhang, Z., Yu, Y. & Zhang, X. (2018). Experimental Testing and Performance Comparisons between V- and Z-shaped Electrothermal Microactuators. I Proceedings of 2018 IEEE International Conference on Mechatronics and Automation, ICMA 2018: ICMA (Bind 2018, s. 521-526). Artikel 8484473 IEEE. https://doi.org/10.1109/ICMA.2018.8484473

Zhang, Z., Yu, Y. & Zhang, X. (2018). Experimental Study on the Life and Nonlinear Actuation Behaviors of V-shaped SU-8 Electrothermal Microactuators. I 2018 IEEE 14th International Conference on Control and Automation, ICCA 2018: ICCA (Bind 2018, s. 1052-1057). Artikel 8444256 IEEE. https://doi.org/10.1109/ICCA.2018.8444256

Zhang, X., K. Mills, J. & L. Cleghom, W. (2009). Experimental Investigation on the vibration Control of a Parallel Manipulator with Multiple Smart Flexible Links. I CCToMM

Thomsen, D. K., Søe-Knudsen, R., Brandt, D. & Zhang, X. (2019). Experimental Implementation of Time-Varying Input Shaping on UR Robots. I O. Gusikhin, K. Madani & J. Zaytoon (red.), ICINCO 2019 - Proceedings of the 16th International Conference on Informatics in Control, Automation and Robotics (Bind 1, s. 488-498). SCITEPRESS Digital Library. https://doi.org/10.5220/0007834504880498

Zhou, Z., Li, L., Wang, R. & Zhang, X. (2020). Experimental Eye-in-hand Calibration for Industrial Mobile Manipulators. I 2020 IEEE International Conference on Mechatronics and Automation, ICMA 2020 (s. 582-587). Artikel 9233585 IEEE. https://doi.org/10.1109/ICMA49215.2020.9233585

Filsoof, O. T., Yde, A., Bøttcher, P. & Zhang, X. (2020). Experimental Analysis of a Scaled-Down Vestas Four-Rotor Wind Turbine. Journal of Physics: Conference Series, 1618(3), Artikel 032005. https://doi.org/10.1088/1742-6596/1618/3/032005

Si, G., Zhang, H., Zhang, Z. & Zhang, X. (2024). Enabling intuitive and effective micromanipulation: A wearable exoskeleton-integrated macro-to-micro teleoperation system with a 3D electrothermal microgripper. Robotics and Autonomous Systems, 181, Artikel 104776. https://doi.org/10.1016/j.robot.2024.104776

Zhang, Z., Yu, Y., Liu, X. & Zhang, X. (2016). Electro-Magnetic Nano Positioning. I C. Ru, X. Liu & Y. Sun (red.), Nanopositioning Technologies: Fundamentals and Applications (s. 151-181). Springer. https://doi.org/10.1007/978-3-319-23853-1_5

Foldager, F., Thomsen, D., Li, H., Frederiksen, K., Andersen, A. & Zhang, X. (2015). Electrical-Mechanical Dynamic Modelling and Testing of a Lightweight-Link Robot Manipulator. I Proceedings of the World Congress on Mechanical, Chemical and Material Engineering (MCM 2015): 4th International Conference on Mechanics and Industrial Engineering (ICMIE'15) Artikel 251 Avestia Publishing. http://avestia.com/MCM2015_Proceedings/files/papers/ICMIE251.pdf

Zhang, X. & Yu, Y. (2005). Efficient Method to Optimize the Joint Torques of a Flexible Redundant Manipulator by Planning the Self-motion. Zhongguo Jixie Gongcheng, 16(15), 1369-1372.

Zhang, X., K. Mills, J. & L. Cleghom, W. (2008). Effect of axial forces on lateral stiffness of a flexible 3-PRR parallel manipulator moving with high-speed. I Proceedings of IEEE international Conference on Information and Automation

chen, Z., Yu, Y., Du, Z. & Zhang, X. (2006). Dynamic Stress Analysis on Meek Joint of Meek Mechanism. Journal of Machine Design, 23(6), 40-43.

Madsen, E., Timm, S. A., Ujfalusi, N. A., Rosenlund, O. S., Brandt, D. & Zhang, X. (2020). Dynamics Parametrization and Calibration of Flexible-Joint Collaborative Industrial Robot Manipulators. Mathematical Problems in Engineering, 2020, Artikel 8709870. https://doi.org/10.1155/2020/8709870

Yu, Y., Zhang, X. & Liu, Y. (2005). Dynamic Planning of Redundant Flexible Cooperative Robots. Zhongguo Jixie Gongcheng, 16(10), 847-851.

Helal, I. B. I., Du, Y., Wang, H. & Zhang, X. (2024). Dynamic Modelling of a Continuum Robot Arm with Five 3-DoF Segments. I X. Rui & C. Liu (red.), Proceedings of the 2nd International Conference on Mechanical Systems (s. 477-493). Springer. https://doi.org/10.1007/978-981-99-8048-2_30

Zhang, Z., Yu, Y., Liu, X. & Zhang, X. (2017). Dynamic Modelling and Analysis of V- and Z-shaped Electrothermal Microactuators. Microsystem Technologies: Micro- and Nanosystems Information Storage and Processing Systems, 23(8), 3775-3789. https://doi.org/10.1007/s00542-016-3180-0

Sørensen, R., Rahbek Iversen, M. & Zhang, X. (2015). Dynamic Modeling of Flexible Robot Manipulators: Acceleration-Based Discrete Time Transfer Matrix Method. I S. Bai & M. Ceccarelli (red.), Recent Advances in Mechanism Design for Robotics, Mechanisms and Machine Science: Proceedings of the 3rd IFToMM Symposium on Mechanism Design for Robotics (Bind 33, s. 377-386). Springer. https://doi.org/10.1007/978-3-319-18126-4_36

Chu, M., Si, G., Zhang, X. & Li, H. (2019). Dynamic Modeling of a Planar Parallel Robot Manipulator Using the Discrete Time Transfer Matrix Method. I 15th International Conference on Multibody Systems, Nonlinear Dynamics, and Control (Bind 6). Artikel DETC2019-98333, V006T09A019 American Society of Mechanical Engineers. https://doi.org/10.1115/DETC2019-98333

Zhang, X. (2014). Dynamic Modeling of a Macro-Micro Manipulator Using Transfer Matrix Method. I L. De Vin & J. Solis (red.), Proceedings of The 14th Mechatronics Forum International Conference Mechatronics 2014 (s. 74-79). Karlstad University Press.

Filsoof, O. T., Hansen, M., Yde, A. & Zhang, X. (2018). Dynamic Modeling and Stability Analysis of a Dual-Rotor Wind Turbine. I 14th International Conference on Multibody Systems, Nonlinear Dynamics, and Control: Volume 6: 14th International Conference on Multibody Systems, Nonlinear Dynamics and Control (Bind 6). Artikel DETC2018-86142 American Society of Mechanical Engineers. https://doi.org/10.1115/DETC2018-86142

Zhang, X., K. Mills, J. & L. Cleghom, W. (2010). Dynamic Modeling and Experimental Validation of a 3-PRR Parallel Manipulator with Flexible Intermediate Link. Journal of Intelligent and Robotic Systems.

Yang, X., Qiang, D., Chen, Z., Wang, H., Zhou, Z. & Zhang, X. (2022). Dynamic Modeling and Digital Twin of a Harmonic Drive Based Collaborative Robot Joint. I 2022 IEEE International Conference on Robotics and Automation, ICRA 2022 (s. 4862-4868). IEEE. https://doi.org/10.1109/ICRA46639.2022.9812458

Chen, W., Yu, Y.-Q., Zhang, X. & Su, L. (2006). Dynamic Modeling and Coupling of Underactuated Flexible Robot. Chinese Journal of Mechanical Engineering (Chinese), 42(6).

Chen, W., Wei, L., Yang, X., Guo, J., Zhang, X. & Zhang, X. (2018). Dynamic Modeling and Analysis of a Mobile Flexible Robot Arm. I 14th International Conference on Multibody Systems, Nonlinear Dynamics, and Control: Volume 6: 14th International Conference on Multibody Systems, Nonlinear Dynamics, and Control (Bind 6). Artikel DETC2018-85835 American Society of Mechanical Engineers. https://doi.org/10.1115/DETC2018-85835

Zhang, X., K. Mills, J. & L. Cleghom, W. (2008). Dynamic modeling and active vibration control of a –PRR flexible parallel manipulator with PZT transducers. I IEEE the 7th World Congress on Intelligent Control and Automation

Zhang, Z., Yu, Y., Liu, X. & Zhang, X. (2016). Dynamic Electro-thermal Modeling of V- and Z-shaped Electrothermal Microactuator. I 2016 IEEE International Conference on Mechatronics and Automation, IEEE ICMA 2016: ICMA (s. 890-895). Artikel 7558680 IEEE. https://doi.org/10.1109/ICMA.2016.7558680

Zhang, X. & Yu, Y. (1998). Dynamic Analysis of Spatial Manipulators Considering Joint and Link Flexibility. Jixie Kexue yu Jishu, 17(5), 775-778.

Zhang, X., Lu, Z. & Sun, Y. (2011). Disposal Micro Devices for Clinical ICSI. I The IEEE 16th International Solid-State Sensors

Zhou, Z., Yang, X., Wang, H. & Zhang, X. (2022). Digital Twin with Integrated Robot-Human/Environment Interaction Dynamics for an Industrial Mobile Manipulator. Proceedings - IEEE International Conference on Robotics and Automation (ICRA), 5041-5047. https://doi.org/10.1109/ICRA46639.2022.9812004

Si, G., Sun, L., Zhang, Z. & Zhang, X. (2021). Design, Fabrication, and Testing of a Novel 3D 3-Fingered Electrothermal Microgripper with Multiple Degrees of Freedom. Micromachines, 12(4), Artikel 444. https://doi.org/10.3390/mi12040444

Si, G., Ding, M., Zhang, Z. & Zhang, X. (2020). Design and Simulation of A Novel Three-Dimensional Multi-Degree-Of-Freedom Electrothermal Microgripper. I 2020 IEEE International Conference on Mechatronics and Automation (ICMA) (s. 659-664). IEEE. https://doi.org/10.1109/ICMA49215.2020.9233636

Si, G., Zhao, Z., Zhang, Z. & Zhang, X. (2024). Design and Experimental Investigation of a Force Sensor for a 3-D Electrothermal Microgripper. IEEE Sensors Journal, 24(3), 2934-2944. https://doi.org/10.1109/JSEN.2023.3336214

Zhou, Z., Li, L. & Zhang, X. (2021). Deep Learning on 3D Object Detection for Automatic Plug-in Charging Using a Mobile Manipulator. I 2021 IEEE International Conference on Robotics and Automation (ICRA) (s. 4148-4154). IEEE. https://doi.org/10.1109/ICRA48506.2021.9561106

Hudert, M. M., Elvebakken, M. F., Meagher, M., Mangliar, L., Zhang, X. & Esterle, L. (2022). Deep learning enhanced robotic fabrication of timber-to-timber connections with densified hardwood nails. I Proceedings of the IASS 2022 Symposium affiliated with APCS 2022 conference: Innovation - Sustainability - Legacy (s. 1740-1748)

Zhang, X., K. Mills, J. & L. Cleghom, W. (2009). Coupling Characteristics of Rigid Body Motion and Elastic Deformation of a 3-PRR Parallel Manipulator with Flexible Link. Multibody System Dynamics, 21(2).

Zhou, Z., Yang, X., Wang, H. & Zhang, X. (2022). Coupled dynamic modeling and experimental validation of a collaborative industrial mobile manipulator with human-robot interaction. Mechanism and Machine Theory, 176, Artikel 105025. https://doi.org/10.1016/j.mechmachtheory.2022.105025

Farhadiyadkuri, F., Strom, L. V., Villadsen, J. B., Hansen, O. H., Sandborg, N. S., Holm, M. L. & Zhang, X. (2020). Control Strategy for a Developed Robotic Spine Exoskeleton. I ICARM 2020 - 2020 5th IEEE International Conference on Advanced Robotics and Mechatronics (s. 546-551). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICARM49381.2020.9195376

Zhang, X., Leung, C., Lu, Z., Esfandiari, N., Casper, R. & Sun, Y. (2012). Controlled Positioning of Biological Cells inside a Micropipette. I IEEE International Conference on Robotics and Automation

Zhang, X., Lu, Z., Leung, C. & Sun, Y. (2012). Controlled Aspiration and Positioning of Biological Cells in a Micropipette. I E E E Transactions on Biomedical Engineering.

Bærenholdt, M., Wang, L. & Zhang, X. (2018). Concept Design and Dynamic Modelling of a Fibre-Based Continuum Robot for Early Cancer Detection Using DT-TMM. I G. Carbone, M. Ceccarelli & D. Pisla (red.), New Trends in Medical and Service Robotics: Advances in Theory and Practice: Proceedings of MESROB 2018 (s. 158-165). University of Cassino. http://www.larmlaboratory.net/PDF/Preprints_proceedings_MESROB2018.pdf

Zhang, X., Sørensen, R., Iversen, M. R. & Li, H. (2018). Computationally efficient dynamic modeling of robot manipulators with multiple flexible-links using acceleration-based discrete time transfer matrix method. Robotics and Computer-Integrated Manufacturing, 49, 181-193. https://doi.org/10.1016/j.rcim.2017.06.010

Madsen, E., Rosenlund, O. S., Brandt, D. & Zhang, X. (2020). Comprehensive modeling and identification of nonlinear joint dynamics for collaborative industrial robot manipulators. Control Engineering Practice, 101, Artikel 104462. https://doi.org/10.1016/j.conengprac.2020.104462

Si, G., Chen, F. & Zhang, X. (2022). Comparison of the Dynamic Performance of Planar 3-DOF Parallel Manipulators. Machines, 10(4), Artikel 233. https://doi.org/10.3390/machines10040233

Mohammadrezaei Nodeh, S., Soltanshah, M., Hasan Ghasemi, M. & Zhang, X. (2018). Combination of interval Type 2 Fuzzy Logic and High Order Sliding Mode Control for Robotic Manipulators with Parametric Uncertainties and Perturbations. I X. Yan, D. Bradley & P. Moore (red.), Reinventing Mechatronics : Proceeding of 16th Mechatronics Forum Biennial International Mechatronics University of Strathclyde.

Viser resultater 51 til 100 ud af 142

2

Revideret 19.12.2023

-

Xuping Zhang