Institut for Mekanik og Produktion

Aarhus Universitets segl

Publications by Mechanics and Materials

Are you looking for publications by Mechanics and Materials? On this page you can find all the publications made by the Mechanics and Materials - Department of Mechanical and Production Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sortér efter: Dato | Forfatter | Titel

Malekan, M., Madsen, K. L., Airao, J., Ilvig, C. F. & Aghababaei, R. (2025). Numerical assessment of tool geometry for improving productivity in milling stainless steel 316 L. International Journal of Advanced Manufacturing Technology, 136(7), 3451-3463. Artikel 109782. https://doi.org/10.1007/s00170-025-15061-5
Ma, L. & Aghababaei, R. (2022). On the Effect of Adhesive Strength and Scratching Depth on Material Transfer During Nanoscale Scratching. Tribology Letters, 70(1), Artikel 26. https://doi.org/10.1007/s11249-021-01558-z
Ma, L. & Aghababaei, R. (2023). On the Uniqueness of Wear Coefficient for Abrasive Wear at Nanoscale. Journal of Tribology, 145(6), Artikel 062101. https://doi.org/10.1115/1.4062099
Ma, L., Nemati, N., Kim, D. E. & Aghababaei, R. (2024). Interface Amorphization Controls Maximum Wear Resistance of Multinanolayer DLC/WC Coatings. ACS Applied Materials and Interfaces, 16(14), 18090-18098. https://doi.org/10.1021/acsami.3c18218
Ma, L. (2024). Atomic insights into the abrasive wear mechanisms of mono- and multi-layer coatings at the single asperity level. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus University.
Luo, X., Andriollo, T., Baxevanakis, K. P. & Silberschmidt, V. V. (2025). Microstructural effect on fracture evolution in spheroidal graphite iron: Numerical analysis. Engineering Failure Analysis, 174, Artikel 109459. https://doi.org/10.1016/j.engfailanal.2025.109459
Lubineau, G., Alfano, M., Tao, R., Wagih, A., Yudhanto, A., Li, X., Almuhammadi, K., Hashem, M., Hu, P., Mahmoud, H. A. & Oz, F. (2024). Harnessing Extrinsic Dissipation to Enhance the Toughness of Composites and Composite Joints: A State-of-the-Art Review of Recent Advances. Advanced Materials, 36(51), Artikel 2407132. https://doi.org/10.1002/adma.202407132
L.S. Hedvard, M., Dias, M. A. & Budzik, M. K. (2024). Toughening mechanisms and damage propagation in Architected-Interfaces. International Journal of Solids and Structures, 288, Artikel 112600. https://doi.org/10.1016/j.ijsolstr.2023.112600
Li, W., Wu, S., Zhu, J., Zhang, L., Zheng, J., Wang, H., Qiu, Y., Xie, G. & Li, C. (2025). Constitutive modelling of time-dependent polymer matrix composites: Incorporating a visco-hyperelastic model into the micromechanical framework. Composite Structures, 366, Artikel 119220. https://doi.org/10.1016/j.compstruct.2025.119220
Li, W., Negahban, M., Zhang, W., Zhang, L. & Zhu, J. (2025). Network yield and detangling as a tool for modeling back-stress network softening: A thermodynamically consistent model for polycarbonate. International Journal of Engineering Science, 215, Artikel 104322. https://doi.org/10.1016/j.ijengsci.2025.104322
Ledda, P. G., Pezzulla, M., Jambon-Puillet, E., Brun, P. T. & Gallaire, F. (2022). Gravity-driven coatings on curved substrates: a differential geometry approach. Journal of Fluid Mechanics, 949, Artikel A38. https://doi.org/10.1017/jfm.2022.758
Ledda, P. G., Garg, H., Østergaard-Clausen, V., Rudzki, L. K., Madary, A. & Pezzulla, M. (2025). Fluid-induced snap-through instability of spherical shells. Physical Review Letters, 135, Artikel 234002. https://doi.org/10.1103/ltqy-d53p
Langthjem, M. A. & Jensen, H. M. (2024). On matched asymptotic expansion solutions of a bucklewave propagation problem. Zeitschrift fuer Angewandte Mathematik und Mechanik, 104(5), 1. Artikel e202300655. https://doi.org/10.1002/zamm.202300655
Langthjem, M. A. & Jensen, H. M. (2025). Erratum to: On matched asymptotic expansion solutions of a bucklewave propagation problem (ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, (2024), 104, 5, 10.1002/zamm.202300655). Zeitschrift fuer Angewandte Mathematik und Mechanik, 105(5), Artikel e70095. https://doi.org/10.1002/zamm.70095
Langthjem, M. A. (2025). Asymptotic approximations and stability of a propagating bucklewave. Zeitschrift fuer Angewandte Mathematik und Physik, 76(5), Artikel 193. https://doi.org/10.1007/s00033-025-02568-w
Kristiansen, M. F., Rasmussen, S. & Mikkelsen, L. P. (2025). Transforming load-controlled fatigue test data into a strain-based SN-curve: Results for unidirectional non-crimp glass fiber/epoxy composites tested in tension-tension. IOP Conference Series: Materials Science and Engineering, 1338(1), Artikel 012018. https://doi.org/10.1088/1757-899X/1338/1/012018
Kristensen, C. K., Kirkegaard, J., Sanporean, C.-G., Budzik, M. K. & Sandberg, M. (2025). Mitigating Discoloration in PA11 SLS: Experimental DoE and Novel Simulation Approaches.
Khanna, N., Patel, D., Raval, P., Airao, J., Badheka, V. & Rahman Rashid, R. A. (2024). Comparison of sustainable cooling/lubrication strategies for drilling of wire arc additively manufactured Inconel 625. Tribology International, 200, Artikel 110068. https://doi.org/10.1016/j.triboint.2024.110068
Jensen, J. S. K. & Aghababaei, R. (2023). Experimental investigation of three-body wear for rubber seals in abrasive slurry environment. Wear, 534-535, Artikel 205131. https://doi.org/10.1016/j.wear.2023.205131
Jensen, J. S. K., Esmizadeh, S., Lund, M., Juhl, J., Nemati, N. & Aghababaei, R. (2025). Evaluating the effect of particle roundness on three-body wear between polymers and metals. Wear, 570, Artikel 206000. https://doi.org/10.1016/j.wear.2025.206000
Jensen, J. S. K. (2024). Investigation of three-body abrasive sand wear in submersible pumps. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus University.
Islam, R. & Borah, J. P. (2023). 3d transition metal substituted Fe3Se4: prediction of potential permanent magnet. Journal of Physics: Condensed Matter, 35(32), Artikel 325801. https://doi.org/10.1088/1361-648X/acd319
Islam, R., Madsen, S. P. & Christensen, M. (2024). Exploring the magnetic properties of W-type SrFe18O27 hexaferrite: Insights from a first-principles study. Physical Review B, 109(2), Artikel 024414. https://doi.org/10.1103/PhysRevB.109.024414
Islam, R., Vero, K. & Borah, J. P. (2024). Historical overview and recent advances in permanent magnet materials. Materials Today Communications, 41, Artikel 110538. https://doi.org/10.1016/j.mtcomm.2024.110538
Islam, R., Madsen, S. P. & Christensen, M. (2025). Enhancing magnetocrystalline anisotropy in W-type SrFe18O27 hexaferrite via tailored substitutions. Acta Materialia, 288, 120828. Artikel 120828. https://doi.org/10.1016/j.actamat.2025.120828
Hund, J., Kouznetsova, V. & Andriollo, T. (2025). Efficient prediction of strength and strain localisation in porous solids via microstructure-based limit analysis. Mechanics of Materials, 201, Artikel 105208. https://doi.org/10.1016/j.mechmat.2024.105208
Hu, P., Dias, M. A. & Budzik, M. K. (2024). Geometric tunability of interlaminar resistance. Composites Part B: Engineering, 287, Artikel 111839. https://doi.org/10.1016/j.compositesb.2024.111839
Hu, P., Li, S. & Budzik, M. K. (2025). Decoupling fracture energy from crack area via surface patterning. Surfaces and Interfaces, 62, Artikel 106066. https://doi.org/10.1016/j.surfin.2025.106066
Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Efficient continuum-based modelling and analysis of polymer SLS: Insights into particle sintering and densification in straight and corner scanning passes. Additive Manufacturing, 109, Artikel 104828. https://doi.org/10.1016/j.addma.2025.104828
Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Particle Flow and Printing Path Effects in SLS. Abstract fra EPF European Polymer Congress, Groningen, Holland.
Heide-Jørgensen, S., Budzik, M. K. & Ibsen, C. H. (2022). Three-dimensional, multiscale homogenization for hybrid woven composites with fiber-matrix debonding. Composites Science and Technology, 218, Artikel 109204. https://doi.org/10.1016/j.compscitech.2021.109204
Hansen, J. G. & de Figueiredo, R. P. (2024). Active Object Detection and Tracking Using Gimbal Mechanisms for Autonomous Drone Applications. Drones, 8(2), Artikel 55. https://doi.org/10.3390/drones8020055
Ghasemi, A., Sadough Vanini, S. A., Alizadeh Zolbin, M. & Aghababaei, R. (2024). Exploring the influence of ultrasonic peening treatment at ambient and cryogenic conditions on the surface characteristics and fatigue life of austenitic stainless steel 304L. Surface and Coatings Technology, 494(Part 1 ), Artikel 131382. https://doi.org/10.1016/j.surfcoat.2024.131382
Garg, H., Ledda, P. G., Skov Pedersen, J. & Pezzulla, M. (2024). Passive Viscous Flow Selection via Fluid-Induced Buckling. Physical Review Letters, 133(8), Artikel 084001. https://doi.org/10.1103/PhysRevLett.133.084001
Gao, X., Zhang, Y., Haahr-Lillevang, L., Vedel-Smith, N. K. & Andriollo, T. (2023). 3D strain pattern in additively manufactured AlSi10Mg from digital volume correlation. Heliyon, 9(12), Artikel e23186. https://doi.org/10.1016/j.heliyon.2023.e23186
Fulco, S., Budzik, M. K., Xiao, H., Durian, D. J. & Turner, K. T. (2025). Disorder enhances the fracture toughness of 2D mechanical metamaterials. PNAS Nexus, 4(2), Artikel pgaf023. https://doi.org/10.1093/pnasnexus/pgaf023
Fulco, S., Budzik, M. K. & Turner, K. (2026). Tailoring toughness and adhesion through architected interfaces. npj Metamaterials, 2, 1-10. Artikel 5. https://doi.org/10.1038/s44455-025-00014-5
Fulco , S., Budzik, M. K. & Turner, K. (2022). Exploiting architected plasticity to enhance fracture toughness while maintaining strength. Abstract fra 19th U.S. National Congress of Theoretical and Applied

Mechanics, Austin, Texas, USA. https://drive.google.com/file/d/1uyFLy4Pk62paHMze4hVJSe7VnknWq1hT/view
Fulco , S., Budzik, M. K., D. Bain , E. & T. Turner , K. (2022). Decoupling toughness and strength through architected plasticity. Extreme Mechanics Letters, 57, Artikel 101912. https://doi.org/10.1016/j.eml.2022.101912
Fulco , S., Budzik, M. K. & T. Turner , K. T. (2024). Enhancing toughness through geometric control of the process zone. Journal of the Mechanics and Physics of Solids, 184, Artikel 105548. https://doi.org/10.1016/j.jmps.2024.105548
E.F. Athanasiadis, A., Budzik, M. K., Fernando, D. & Dias, M. A. (2024). On micropolar elastic foundations. European Journal of Mechanics A - Solids, 105, Artikel 105277. https://doi.org/10.1016/j.euromechsol.2024.105277
E.F. Athanasiadis, A., Duncan, O., Budzik, M. K. & Dias, M. A. (2025). Toughness of Confined Auxetic Foams. Advanced Engineering Materials, 27(17), Artikel 2500626. https://doi.org/10.1002/adem.202500626
Dias, M. A., Athanasiadis, A., Fernando, D. N. & Budzik, M. K. (2023). Micromechanics of architected interfaces. 73. Abstract fra International Conference on Adhesive Bonding 2023, Porto, Portugal.
Dias, M. A., E.F. Athanasiadis, A., N. Fernando, D. & Budzik, M. K. (2024). Damage propagation in Architected-Interfaces. 1. Abstract fra American Physical Society March Meeting 2024, Minneapolis , Minnesota, USA. https://meetings.aps.org/Meeting/MAR24/Session/Q35.10
De Cunto, L. O., Sadik, S. & Kirkegaard, P. H. (2024). Surrogate modeling of springback in thermoformed foam cores. Poster-session præsenteret på The 19th European Mechanics of Materials Conferences (EMMC), Madrid, Spanien.
Darki, A. A., Madsen, S. P. & Dantan, A. R. (2022). Polarization-independent optical spatial differentiation with a doubly-resonant one-dimensional guided-mode grating. Optics Express, 30(3), 3962-3972. https://doi.org/10.1364/OE.450981
Darki, A. A., Dantan, A., Nygaard, J. V., Madsen, S. P., Parthenopoulos, A., Toft-Vandborg, C. & Vandborg, C. (2022). Optical spatial differentiation with ultrathin freestanding subwavelength gratings. I P. Schelkens & T. Kozacki (red.), Optics, Photonics and Digital Technologies for Imaging Applications VII Artikel 121380D SPIE - International Society for Optical Engineering. https://doi.org/10.1117/12.2621186
Darabi, R., Oliveira, J. P., Nemati, N., Reis, A. & de Sá, J. C. (2025). Benchmarking advanced multiphase field modeling of Inconel 625 in additive manufacturing: Correlating powder bed fusion with dendrite growth and crack formation. Materialia, 40, Artikel 102384. https://doi.org/10.1016/j.mtla.2025.102384
Calafà, M., Hovad, E., Engsig-Karup, A. P. & Andriollo, T. (2024). Physics-Informed Holomorphic Neural Networks (PIHNNs): Solving 2D linear elasticity problems. Computer Methods in Applied Mechanics and Engineering, 432, Artikel 117406. https://doi.org/10.1016/j.cma.2024.117406
Calafà, M. (2024). Characterization of the angular coefficient method on 2D and 3D piecewise smooth boundaries. Computational and Applied Mathematics, 43(8), Artikel 450. https://doi.org/10.1007/s40314-024-02969-z

Viser resultater 51 til 100 ud af 122

Forrige

1

2

3

Næste

Revideret 13.11.2025
-
AU Engineering