Institut for Mekanik og Produktion

Aarhus Universitets segl

Publications by Mechanics and Materials

Are you looking for publications by Mechanics and Materials? On this page you can find all the publications made by the Mechanics and Materials - Department of Mechanical and Production Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sortér efter: Dato | Forfatter | Titel

Zhu, J., Li, X., Zhou, Q. & Aghababaei, R. (2022). On the anisotropic scratching behavior of single crystalline copper at nanoscale. Tribology International, 175, Artikel 107794. https://doi.org/10.1016/j.triboint.2022.107794
Zhu, J. & Aghababaei, R. (2023). On the size effect in scratch and wear response of single crystalline copper. Tribology International, 186, Artikel 108573. https://doi.org/10.1016/j.triboint.2023.108573
Zhu, J., Xiao, J., Zhou, Q. & Aghababaei, R. (2024). Effect of grain boundary on scratch behavior of polycrystalline copper. International Journal of Mechanical Sciences, 272, Artikel 109175. https://doi.org/10.1016/j.ijmecsci.2024.109175
Zheng, W., Ma, L., Pei, S. & Aghababaei, R. (2024). Numerical assessment of transition in cutting mode and its effect on roughness creation. International Journal of Mechanical Sciences, 261, Artikel 108666. https://doi.org/10.1016/j.ijmecsci.2023.108666
Zhang, Z., Zhang, L., Jasa, J., Negahban, M. & Gazonas, G. (2022). Molecular sources of ratcheting in poly-dispersed polycarbonate. International Journal of Fatigue, 154, Artikel 106567. https://doi.org/10.1016/j.ijfatigue.2021.106567
Won, J., Bae, J., Kim, H., Kim, T., Nemati, N., Choi, S., Jung, M. C., Kim, S., Choi, H., Kim, B., Jin, D., Kim, M., Han, M. J., Kim, J. Y. & Shim, W. (2023). Polytypic Two-Dimensional FeAs with High Anisotropy. Nano Letters, 23(23), 11057-11065. https://doi.org/10.1021/acs.nanolett.3c03324
Vero, K., Islam, R. & Borah, J. P. (2023). First-principles study on the enhancement of structure stability and magnetocrystalline anisotropy energy of L10-ordered Mn1−xFexAlC compound for permanent magnet application. Journal of Applied Physics, 134(15), Artikel 153902. https://doi.org/10.1063/5.0172356
van Innis, C., Budzik, M. K. & Pardoen, T. (2025). Bridging in co-cured composite joints. International Journal of Solids and Structures, 309, Artikel 113194. https://doi.org/10.1016/j.ijsolstr.2024.113194
van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2022). Composite joint toughening by multiscale architecturing through integrated manufacturing. Abstract fra The 11th European Solid Mechanics , Galway, Irland. file:///C:/Users/au564491/Downloads/vanInnis_esmc2022%20(1).pdf
van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2023). Ultra tough architected joints through single step bonding process with tunable properties. 205. Abstract fra International Conference on Adhesive Bonding 2023, Porto, Portugal.
van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2024). Ultra-tough architected adhesive joints for integrated composite processing and bonding. Composites Part A: Applied Science and Manufacturing, 177, Artikel 107949. https://doi.org/10.1016/j.compositesa.2023.107949
van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2024). Ultra tough architected joints through single manufacturing step. Abstract fra 9th International Conference on Fracture of Polymers, Composites and Adhesives, Schweiz.
Truong, T. T., Airao, J., Hojati, F., Ilvig, C. F., Azarhoushang, B., Karras, P. & Aghababaei, R. (2024). Data-driven prediction of tool wear using Bayesian regularized artificial neural networks. Measurement: Journal of the International Measurement Confederation, 238, Artikel 115303. https://doi.org/10.1016/j.measurement.2024.115303
Truong, T. T., Airao, J., Fattahi, S., Azarhoushang, B., Karras, P. & Aghababaei, R. (2025). Image-based machine learning model for tool wear estimation in milling Inconel 718. Wear, 571, Artikel 205865. https://doi.org/10.1016/j.wear.2025.205865
Traistaru, O. T. L., Shyam, P., Christensen, M. & Madsen, S. P. (2022). Optimizing the energy product of exchange-coupled soft/hard Zn0.2Fe2.8O4/SrFe12O19magnets. Journal of Applied Physics, 132(16), Artikel 163904. https://doi.org/10.1063/5.0103242
Teixeira de Freitas, S., Roos, L., Papadakis, L., Sena-Cruz, J. & Budzik, M. K. (2022, feb.). COST Action CA18120: Reliable roadmap for certification of bonded primary structures APPLICATION FOR COST GRANTS. EU. https://certbond.eu/wp-content/uploads/Certbond-Guidelines_COST-Grants_v20221114.pdf
Teixeira de Freitas, S. & Budzik, M. K. (2023). Bondline thickness: Fracture mechanics perspective. I D. A. Dillard (red.), Advances in Structural Adhesive Bonding, Second Edition (2 udg., s. 615-641). Woodhead Publishing. https://doi.org/10.1016/B978-0-323-91214-3.00027-2
Taylor, A. P., Vankayalapati, G. S., Budzik, M. K. & Turner, K. T. (2025). Hinged Rigid Beam Fracture Specimen for Characterization of Lattice and Thin-Sheet Materials. Experimental Mechanics, 65(9), 1375–1386. https://doi.org/10.1007/s11340-025-01214-w
Taffetani, M. & Pezzulla, M. (2025). Nonlinear morphoelastic energy based theory for stimuli responsive elastic shells. ArXiv.
Sujon, M. A. S., Masato, D., Andriollo, T., Pan, Z., Nadimpalli, V. K., Henriquez, V. C. & Islam, A. (2024). Novel approach for optimizing mechanical and damping performance of MABS composites reinforced with basalt fibers: An experimental study. Composites Science and Technology, 251, Artikel 110578. https://doi.org/10.1016/j.compscitech.2024.110578
Spangsberg, E., Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Multiscale Modelling of Heat Transfer in Selective Laser Sintering. engrXiv. https://doi.org/10.31224/4704
Sivebaek, I. M., Aghababaei, R. & Espallargas, N. (2024). Editorial: Selected papers from NORDTRIB 2022. Wear, 544-545, Artikel 205183. https://doi.org/10.1016/j.wear.2023.205183
singh, G., Mitra, T., Madsen, S. P. & Dantan, A. R. (2024). Highly reflective and high-Q thin resonant subwavelength gratings. Journal of Physics: Photonics, 6(4), Artikel 045009. https://doi.org/10.1088/2515-7647/ad70e7
Shojaeifard, M., Ferraresso, M., Lucantonio, A. & Bacca, M. (2025). Machine learning-based optimal design of fibrillar adhesives. Journal of the Royal Society Interface, 22(223), Artikel 20240636. https://doi.org/10.1098/rsif.2024.0636
Sahli, R., Mikkelsen, J., Boye, M. S., Dias, M. A. & Aghababaei, R. (2024). Frictional Contact of Soft Polymeric Shells. Physical Review Letters, 133(10), Artikel 106202. https://doi.org/10.1103/PhysRevLett.133.106202
Sadik, S., Walker, M. G. & Dias, M. A. (2022). On local kirigami mechanics II: Stretchable creased solutions. Journal of the Mechanics and Physics of Solids, 161, Artikel 104812. https://doi.org/10.1016/j.jmps.2022.104812
Sadik, S. & Yavari, A. (2024). Nonlinear anisotropic viscoelasticity. Journal of the Mechanics and Physics of Solids, 182, Artikel 105461. https://doi.org/10.1016/j.jmps.2023.105461
Sadik, S. & Yavari, A. (2025). A generalized Coleman-Noll procedure and the balance laws of hyper-anelasticity. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 481(2320), Artikel 20250076. https://doi.org/10.1098/rspa.2025.0076
Rao, S., Budzik, M. K. & Dias, M. A. (2022). On microscopic analysis of fracture in unidirectional composite material using phase field modelling. Composites Science and Technology, 220, Artikel 109242. https://doi.org/10.1016/j.compscitech.2021.109242
Pimentel de Figueiredo, R., Limberg, C., Jamone, L. & Bernardino, A. (2025). Editorial: Computer vision mechanisms for resource-constrained robotics applications. Frontiers in Robotics and AI, 12, Artikel 1680098. https://doi.org/10.3389/frobt.2025.1680098
Pimentel de Figueiredo, R. (2025). Knowledge-Guided Symbolic Regression for Interpretable Camera Calibration. Journal of Imaging, 11(11), Artikel 389. https://doi.org/10.3390/jimaging11110389
Pardoen, T., T. Turner , K. T. & Budzik, M. K. (2023). Architected adhesive joints with improved fracture toughness. I D. A. Dillard (red.), Advances in Structural Adhesive Bonding (2 udg., s. 1105-1122). Woodhead Publishing. https://doi.org/10.1016/B978-0-323-91214-3.00012-0
Paraskevoulakos, C., Ghosh, S., Andriollo, T. & Michel, A. (2024). Sensitivity Study Using Synthetic 3D Image Datasets to Investigate the Effect of Noise Artefacts on Digital Volume Correlation. Experimental Mechanics, 64(5), 595-624. https://doi.org/10.1007/s11340-024-01046-0
Paggi, M. & Aghababaei, R. (2025). Preface: Contact Mechanics and Tribology in the ICTAM Century. International Journal of Solids and Structures, 323, Artikel 113642. https://doi.org/10.1016/j.ijsolstr.2025.113642
Ostrowski, H., Sandberg, M. & Budzik, M. K. (2025). Novel fracture mechanics tests for thin 3D printed materials. Abstract fra EPF European Polymer Congress, Groningen, Holland.
Norouzikudiani, R., Lucantonio, A. & DeSimone, A. (2023). Equilibrium and transient response of photo-actuated Liquid Crystal Elastomer beams. Mechanics Research Communications, 131, Artikel 104126. https://doi.org/10.1016/j.mechrescom.2023.104126
Nitschke, I., Sadik, S. & Voigt, A. (2024). Tangential Tensor Fields on Deformable Surfaces – How to Derive Consistent L2-Gradient Flows. IMA Journal of Applied Mathematics, 88(6), 917-958. https://doi.org/10.1093/imamat/hxae006
Niknafs, S., Silani, M., Concli, F. & Aghababaei, R. (2022). A coarse-grained concurrent multiscale method for simulating brittle fracture. International Journal of Solids and Structures, 254-255, Artikel 111898. https://doi.org/10.1016/j.ijsolstr.2022.111898
Niknafs, S., Silani, M., Concli, F. & Aghababaei, R. (2025). Numerical analysis of fatigue crack propagation using a coarse-grained molecular dynamics approach. International Journal of Solids and Structures, 311, Artikel 113245. https://doi.org/10.1016/j.ijsolstr.2025.113245
Nemati, N., Manhard, A., Greuner, H., Hunger, K., Böswirth, B., Visca, E. & You, J. H. (2023). Microstructural evolution of tungsten under thermal loads: A comparative study between cyclic high heat flux loading and isochronous furnace heating. Nuclear Materials and Energy, 36, Artikel 101465. https://doi.org/10.1016/j.nme.2023.101465
Nazari, R., Aghababaei, R., Papangelo, A. & Ciavarella, M. (2025). Adhesion- and friction-induced suppression of buckling in thin spherical shells in contact with a rigid wall. International Journal of Engineering Science, 215, Artikel 104329. https://doi.org/10.1016/j.ijengsci.2025.104329
Nasr Saleh, M., Budzik, M. K., Saeedifar, M., Zarouchas, D. & Teixeira de Freitas, S. (2022). On the influence of the adhesive and the adherend ductility on mode I fracture characterization of thick adhesively-bonded joints. International Journal of Adhesion and Adhesives, 115, Artikel 103123. https://doi.org/10.1016/j.ijadhadh.2022.103123
Movassagh-Alanagh, F., Abdollah-zadeh, A., Alizadeh Zolbin, M., Nemati, N. & Aghababaei, R. (2023). Plasma-enhanced chemical vapor deposition of TiB2 and TiBN hard coatings using BBr3. Tribology International, 179, Artikel 108137. https://doi.org/10.1016/j.triboint.2022.108137
Movassagh-Alanagh, F., Abdollah-Zadeh, A. & Aghababaei, R. (2025). Effects of B and C elements on microstructure, mechanical and tribological properties of TiN coating deposited by PACVD. Materials Characterization, 225, Artikel 115178. https://doi.org/10.1016/j.matchar.2025.115178
Mitra, T., singh, G., Darki, A. A., Madsen, S. P. & Dantan, A. R. (2024). Narrow-linewidth Fano microcavities with resonant subwavelength grating mirror. Optics Express, 32(9), 15667-15679. https://doi.org/10.1364/OE.521329
Manti, S. & Lucantonio, A. (2024). Discovering interpretable physical models using symbolic regression and discrete exterior calculus. Machine Learning: Science and Technology, 5(1), Artikel 015005. https://doi.org/10.1088/2632-2153/ad1af2
Manti, S., Tsai, P.-H., Lucantonio, A. & Iliescu, T. (2025). Symbolic regression of data-driven reduced order model closures for under-resolved, convection-dominated flows. Journal of Computational Physics, 540, Artikel 114298. https://doi.org/10.1016/j.jcp.2025.114298
Manti, S., Mohammadian, S., Treiber, M. & Lucantonio, A. (2025). SR-Traffic: Discovering Macroscopic Traffic Flow Models with Symbolic Regression. 1-7. https://ml4physicalsciences.github.io/2025/files/NeurIPS_ML4PS_2025_105.pdf
Malekan, M., Ilvig, C. F. & Aghababaei, R. (2024). Effects of Edge Radius and Coating Thickness on the Cutting Performance of AlCrN-Coated Tool. International Journal of Precision Engineering and Manufacturing, 25(10), 2059-2075. https://doi.org/10.1007/s12541-024-01074-9
Malekan, M., Madsen, K. L., Airao, J., Ilvig, C. F. & Aghababaei, R. (2025). Numerical assessment of tool geometry for improving productivity in milling stainless steel 316 L. International Journal of Advanced Manufacturing Technology, 136(7), 3451-3463. Artikel 109782. https://doi.org/10.1007/s00170-025-15061-5

Viser resultater 1 til 50 ud af 119

1

2

3

Næste

Revideret 13.11.2025
-
AU Engineering