Publications by Mechanics and Materials

Are you looking for publications by Mechanics and Materials? On this page you can find all the publications made by the Mechanics and Materials - Department of Mechanical and Production Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sortér efter: Dato | Forfatter | Titel

Darki, A. A., Dantan, A., Nygaard, J. V., Madsen, S. P., Parthenopoulos, A., Toft-Vandborg, C. & Vandborg, C. (2022). Optical spatial differentiation with ultrathin freestanding subwavelength gratings. I P. Schelkens & T. Kozacki (red.), Optics, Photonics and Digital Technologies for Imaging Applications VII Artikel 121380D SPIE - International Society for Optical Engineering. https://doi.org/10.1117/12.2621186

Darabi, R., Oliveira, J. P., Nemati, N., Reis, A. & de Sá, J. C. (2025). Benchmarking advanced multiphase field modeling of Inconel 625 in additive manufacturing: Correlating powder bed fusion with dendrite growth and crack formation. Materialia, 40, Artikel 102384. https://doi.org/10.1016/j.mtla.2025.102384

Calafà, M., Hovad, E., Engsig-Karup, A. P. & Andriollo, T. (2024). Physics-Informed Holomorphic Neural Networks (PIHNNs): Solving 2D linear elasticity problems. Computer Methods in Applied Mechanics and Engineering, 432, Artikel 117406. https://doi.org/10.1016/j.cma.2024.117406

Calafà, M. (2024). Characterization of the angular coefficient method on 2D and 3D piecewise smooth boundaries. Computational and Applied Mathematics, 43(8), Artikel 450. https://doi.org/10.1007/s40314-024-02969-z

Calafà, M., Jensen, H. M. & Andriollo, T. (2025). Solving plane crack problems via enriched holomorphic neural networks. Engineering Fracture Mechanics, 322, Artikel 111133. https://doi.org/10.1016/j.engfracmech.2025.111133

Budzik, M. K., Wolfahrt, M., Reis, P., Kozłowski, M., Sena-Cruz, J., Papadakis, L., Nasr Saleh, M., V. Machalicka, K., Teixeira de Freitas, S. & P. Vassilopoulos, A. (2022). Testing mechanical performance of adhesively bonded composite joints in engineering applications: an overview. The Journal of Adhesion, 98(14), 2133-2209. https://doi.org/10.1080/00218464.2021.1953479

Budzik, M. K., Fulco , S. & Turner, K. (2022). Materials with architected plasticity and decoupled strength and toughness. Abstract fra The 11th European Solid Mechanics , Galway, Irland.

Budzik, M. K., Dias, M. A. & Hoffmann, U. S. (2023). Design of failure loads and crack growth by width varying interfaces. 142. Abstract fra International Conference on Adhesive Bonding 2023, Porto, Portugal.

Budzik, M. K., Dias, M. A., Hedvard, M. & Athanasiadis, A. (2023). Failure of architected interfaces. 47. Abstract fra International Conference on Adhesive Bonding 2023, Porto, Portugal.

Bokharaie, B., Aghababaei, R. & Budzik, M. K. (2022). Failure of additively manufactured carbon fiber composite hexagonal frames. Abstract fra The 20th European Conference on Composite Materials, Lausanne, Schweiz. file:///C:/Users/au564491/Downloads/Abstracts_Monday.pdf

Bokharaie, B.-U., Aghababaei, R., Dias, M. A. & Budzik, M. K. (2024). Failure of 3D-printed composite continuous carbon fibre hexagonal frames. Composites Part B: Engineering, 275, Artikel 111307. https://doi.org/10.1016/j.compositesb.2024.111307

Barvenik, K., Coogan, Z., Librandi, G., Pezzulla, M. & Tubaldi, E. (2024). Tactile Sensing and Grasping Through Thin-Shell Buckling. Advanced Intelligent Systems , 6(9), Artikel 2300855. https://doi.org/10.1002/aisy.202300855

Barettin, D., Madsen, S., Lassen, B. & Willatzen, M. (2011). Comparison of Atomistic and Continuum Quantum-Dot Elastic Models and Implications for Optoelectronic Properties. AIP Conference Proceedings, 1399, 445.

Bardella, L. & Jensen, H. M. (2025). Preface: Thematic session SM12 on Plasticity, Viscoplasticity and Creep of the 26th International Congress of Theoretical and Applied Mechanics (ICTAM2024). International Journal of Solids and Structures, 322, Artikel 113624. https://doi.org/10.1016/j.ijsolstr.2025.113624

Bae, J., Won, J., Kim, T., Choi, S., Kim, H., Oh, S. H. V., Lee, G., Lee, E., Jeon, S., Kim, M., Do, H. W., Seo, D., Kim, S., Cho, Y., Kang, H., Kim, B., Choi, H., Han, J., Kim, T. ... Shim, W. (2024). Cation-eutaxy-enabled III–V-derived van der Waals crystals as memristive semiconductors. Nature Materials, 23(10), 1402-1410. https://doi.org/10.1038/s41563-024-01986-x

Andriollo, T., Kouznetsova, V. & Alessandretti, L. (2022). Network approach for the analysis of the irreversible deformation of solids with soft heterogeneities. Physical Review Materials, 6(11), Artikel L110601 . https://doi.org/10.1103/PhysRevMaterials.6.L110601

Andriollo, T. (2022). Network science approach to predict the yield strength of metals containing soft particles and pores. I O P Conference Series: Materials Science and Engineering, 1249, Artikel 012018. https://doi.org/10.1088/1757-899X/1249/1/012018

Anand, M., Panigrahi, S., Kofoed, M. V. W., Aghababaei, R. & Agarwala, S. (2024). Bioinspired poly(vinyl alcohol) films with tunable adhesion and self-healing for biodegradable electronics and beyond. Sustainable Materials and Technologies, 41, Artikel e01084. https://doi.org/10.1016/j.susmat.2024.e01084

Alstrøm, T. S., Sørensen, M. P., Pedersen, N. F. & Madsen, S. (2011). Magnetic Flux Lines in Complex Geometry Type-II Superconductors Studied by the Time Dependent Ginzburg-Landau Equation. Acta Applicandae Mathematicae, 115, 63-74. https://doi.org/10.1007/s10440-010-9580-8

Alessi, C., Falotico, E. & Lucantonio, A. (2023). Ablation Study of a Dynamic Model for a 3D-Printed Pneumatic Soft Robotic Arm. IEEE Access, 11, 37840-37853. https://doi.org/10.1109/ACCESS.2023.3266282

Alameen, E. H. O., Lucantonio, A. & DeSimone, A. (2023). Mechanics and transient morphing of soft hygroscopic bilayers. Mechanics Research Communications, 131, Artikel 104131. https://doi.org/10.1016/j.mechrescom.2023.104131

Airao, J., Jain, A., Nirala, C. K. & Unune, D. (2025). Tribological performance in micro-milling of Ti6Al4V under nanofluid-based minimum quantity lubrication. International Journal on Interactive Design and Manufacturing, 19(3), 1807-1819. https://doi.org/10.1007/s12008-024-01856-5

Airao, J., Gupta, A., Nirala, C. K. & Hsue, A. W. J. (2024). Bayesian neural networks modeling for tool wear prediction in milling Al 6061 T6 under MQL conditions. International Journal of Advanced Manufacturing Technology, 135(5-6), 2777-2788. https://doi.org/10.1007/s00170-024-14678-2

Airao, J., Malekan, M., Budzik, M. & Aghababaei, R. (2024). Effect of Friction on Critical Cutting Depth for Ductile-Brittle Transition in Material Removal Mechanism. Journal of Tribology, 146(11), Artikel 114201 EN. https://doi.org/10.1115/1.4066052

Aghababaei, R., Malekan, M. & Budzik, M. (2021). Cutting Depth Dictates the Transition from Continuous to Segmented Chip Formation. Physical Review Letters, 127(23), Artikel A202. https://doi.org/10.1103/PhysRevLett.127.235502

Abu Shaid Sujon, M., Andriollo, T. & Islam, A. (2023). Enhancing vibration damping properties of MABS/VDT blends using SEBS‑g‑MAH as a compatibilizer. Journal of Polymer Research, 30(12), Artikel 440. https://doi.org/10.1007/s10965-023-03819-y

Viser resultater 101 til 126 ud af 126