Publikationer

Her finder du en samlet liste over de publikationer, som er lavet af medarbejdere ved Institut for Mekanik og Produktion for eksempel tidsskriftsartikler, bøger, rapporter m.v.

Publikationsliste

Sortér efter: Dato | Forfatter | Titel

Wahlgren, S. S., Jensen, H. M. & Budzik, M. K. (2026). On the transition from arc debonding to tunneling at fiber–matrix interfaces. Composites Part B: Engineering, 318, Artikel 113624. https://doi.org/10.1016/j.compositesb.2026.113624

Langthjem, M. A. (2022). On the stability of a doubly infinite vortex array. Theoretical and Computational Fluid Dynamics, 36(3), 369-385. https://doi.org/10.1007/s00162-022-00604-3

Zhu, J. & Aghababaei, R. (2023). On the size effect in scratch and wear response of single crystalline copper. Tribology International, 186, Artikel 108573. https://doi.org/10.1016/j.triboint.2023.108573

Rahdan, P. (2025). On the role of solar photovoltaics and demand management in the transition of the European energy system to net-zero emissions. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus University Library.

Nasr Saleh, M., Budzik, M. K., Saeedifar, M., Zarouchas, D. & Teixeira de Freitas, S. (2022). On the influence of the adhesive and the adherend ductility on mode I fracture characterization of thick adhesively-bonded joints. International Journal of Adhesion and Adhesives, 115, Artikel 103123. https://doi.org/10.1016/j.ijadhadh.2022.103123

Langthjem, M. A. (1994). On the influence of damping in a problem of dynamic stability optimization. Structural and Multidisciplinary Optimization, 7(4), 227-236.

Breyer, C., Khalili, S., Bogdanov, D., Ram, M., Oyewo, A. S., Aghahosseini, A., Gulagi, A., Solomon, A. A., Keiner, D., Lopez, G., Østergaard, P. A., Lund, H., V. Mathiesen, B., Z. Jacobson, M., Victoria, M., Teske, S., Pregger, T., Fthenakis, V., Raugei, M. ... Sovacool, B. (2022). On the History and Future of 100% Renewable Energy Systems Research. IEEE Access, 10, 78176 - 78218. https://doi.org/10.1109/ACCESS.2022.3193402

Ma, L. & Aghababaei, R. (2022). On the Effect of Adhesive Strength and Scratching Depth on Material Transfer During Nanoscale Scratching. Tribology Letters, 70(1), Artikel 26. https://doi.org/10.1007/s11249-021-01558-z

Mula, B. B., Escalona, J., Lambert, R., Ling, R. & Balling, O. (2023). On the definition and effect of optimum gear microgeometry modifications for the gearbox of an offshore 10-MW wind turbine. Wind Energy, 26(7), 717-740. https://doi.org/10.1002/we.2825

L. Jensen, C. S., B. E. Pedersen, R., Mula, B. B., Escalona, J. & Balling, O. (2022). On the Combination of Geometrically Nonlinear Models and Substructuring for Multibody Simulation of Wind Turbine Blades. I 18th International Conference on Multibody Systems, Nonlinear Dynamics, and Control (MSNDC) Artikel DETC2022-90948, V009T09A011 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2022-90948

Zhu, J., Li, X., Zhou, Q. & Aghababaei, R. (2022). On the anisotropic scratching behavior of single crystalline copper at nanoscale. Tribology International, 175, Artikel 107794. https://doi.org/10.1016/j.triboint.2022.107794

Langthjem, M. A. & Nakano, M. (2021). On the acoustic trapped modes and their symmetry properties in a circular cylindrical waveguide with a cavity. Journal of Engineering Mathematics, 128(1), Artikel 14. https://doi.org/10.1007/s10665-021-10126-2

Rao, S., Budzik, M. K. & Dias, M. A. (2022). On microscopic analysis of fracture in unidirectional composite material using phase field modelling. Composites Science and Technology, 220, Artikel 109242. https://doi.org/10.1016/j.compscitech.2021.109242

E.F. Athanasiadis, A., Budzik, M. K., Fernando, D. & Dias, M. A. (2024). On micropolar elastic foundations. European Journal of Mechanics A - Solids, 105, Artikel 105277. https://doi.org/10.1016/j.euromechsol.2024.105277

Langthjem, M. A. & Jensen, H. M. (2024). On matched asymptotic expansion solutions of a bucklewave propagation problem. Zeitschrift fuer Angewandte Mathematik und Mechanik, 104(5), 1. Artikel e202300655. https://doi.org/10.1002/zamm.202300655

Sadik, S., Walker, M. G. & Dias, M. A. (2022). On local kirigami mechanics II: Stretchable creased solutions. Journal of the Mechanics and Physics of Solids, 161, Artikel 104812. https://doi.org/10.1016/j.jmps.2022.104812

Sadik, S. & Dias, M. A. (2021). On local kirigami mechanics I: Isometric conical solutions. Journal of the Mechanics and Physics of Solids, 151, Artikel 104370. https://doi.org/10.1016/j.jmps.2021.104370

Filsoof, O. T., Yde, A., Bøttcher, P. & Zhang, X. (2021). On critical aeroelastic modes of a tri-rotor wind turbine. International Journal of Mechanical Sciences, 204, Artikel 106525. https://doi.org/10.1016/j.ijmecsci.2021.106525

Abu-Ghaida, H., Leka, S., Kunrath, K., Thostrup, R. & Ramanujan, D. (2021). Økoengineer – A Web-Based Game Platform for Guided Discovery-Based Sustainability Learning in Engineering Curricula. I 18th International Conference on Design Education (DEC): 18th International Conference on Design Education (DEC) (Bind 4). Artikel DETC2021-69406, V004T04A014 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2021-69406

Šeta, B., Sandberg, M., Brander, M., Mollah, M. T., Pokkalla, D. K., Kumar, V. & Spangenberg, J. (2024). Numerical modeling of fiber orientation in multi-layer, isothermal material-extrusion big area additive manufacturing. Additive Manufacturing, 92, Artikel 104396. https://doi.org/10.1016/j.addma.2024.104396

Zheng, W., Ma, L., Pei, S. & Aghababaei, R. (2024). Numerical assessment of transition in cutting mode and its effect on roughness creation. International Journal of Mechanical Sciences, 261, Artikel 108666. https://doi.org/10.1016/j.ijmecsci.2023.108666

Malekan, M., Madsen, K. L., Airao, J., Ilvig, C. F. & Aghababaei, R. (2025). Numerical assessment of tool geometry for improving productivity in milling stainless steel 316 L. International Journal of Advanced Manufacturing Technology, 136(7), 3451-3463. Artikel 109782. https://doi.org/10.1007/s00170-025-15061-5

Nozarian, S., Rincón, M. J., Forooghi, P., Reclari, M. & Abkar, M. (2026). Numerical and experimental investigations of laminarization via preconditioning in turbulent pipe flows. Journal of Physics: Conference Series, 3173(1), Artikel 012009. https://doi.org/10.1088/1742-6596/3173/1/012009

Niknafs, S., Silani, M., Concli, F. & Aghababaei, R. (2025). Numerical analysis of fatigue crack propagation using a coarse-grained molecular dynamics approach. International Journal of Solids and Structures, 311, Artikel 113245. https://doi.org/10.1016/j.ijsolstr.2025.113245

Farhadiyadkuri, F. & Zhang, X. (2023). Novel Interaction Control in Adolescent Idiopathic Scoliosis Treatment Using a Robotic Brace. Journal of Intelligent and Robotic Systems: Theory and Applications, 109(3), Artikel 73. https://doi.org/10.1007/s10846-023-02010-1

Ostrowski, H., Sandberg, M. & Budzik, M. K. (2025). Novel fracture mechanics tests for thin 3D printed materials. Abstract fra EPF European Polymer Congress, Groningen, Holland.

Sujon, M. A. S., Masato, D., Andriollo, T., Pan, Z., Nadimpalli, V. K., Henriquez, V. C. & Islam, A. (2024). Novel approach for optimizing mechanical and damping performance of MABS composites reinforced with basalt fibers: An experimental study. Composites Science and Technology, 251, Artikel 110578. https://doi.org/10.1016/j.compscitech.2024.110578

Taffetani, M. & Pezzulla, M. (2026). Nonlinear Morphoelastic Energy Based Theory for Stimuli Responsive Elastic Shells. Journal of Elasticity, 158(22), Artikel 22. https://doi.org/10.1007/s10659-026-10198-0

Taffetani, M. & Pezzulla, M. (2025). Nonlinear morphoelastic energy based theory for stimuli responsive elastic shells. ArXiv.

Sadik, S. & Yavari, A. (2024). Nonlinear anisotropic viscoelasticity. Journal of the Mechanics and Physics of Solids, 182, Artikel 105461. https://doi.org/10.1016/j.jmps.2023.105461

Brandt, A. (2023). Noise and Vibration Analysis: Signal Analysis and Experimental Procedures. (2 udg.) Wiley. https://doi.org/10.1002/9781118962176

Bazmohammadi, N., Madary, A., Vasquez, J. C. & Guerrero, J. M. (2025). New Horizons for Control and Energy Management of Closed-Ecological Systems: Insights and Future Trends. IEEE Industrial Electronics Magazine, 19(1), 2-14. https://doi.org/10.1109/MIE.2024.3437341

Li, W., Negahban, M., Zhang, W., Zhang, L. & Zhu, J. (2025). Network yield and detangling as a tool for modeling back-stress network softening: A thermodynamically consistent model for polycarbonate. International Journal of Engineering Science, 215, Artikel 104322. https://doi.org/10.1016/j.ijengsci.2025.104322

Andriollo, T. (2022). Network science approach to predict the yield strength of metals containing soft particles and pores. I O P Conference Series: Materials Science and Engineering, 1249, Artikel 012018. https://doi.org/10.1088/1757-899X/1249/1/012018

Andriollo, T., Kouznetsova, V. & Alessandretti, L. (2022). Network approach for the analysis of the irreversible deformation of solids with soft heterogeneities. Physical Review Materials, 6(11), Artikel L110601 . https://doi.org/10.1103/PhysRevMaterials.6.L110601

Mitra, T., singh, G., Darki, A. A., Madsen, S. P. & Dantan, A. R. (2024). Narrow-linewidth Fano microcavities with resonant subwavelength grating mirror. Optics Express, 32(9), 15667-15679. https://doi.org/10.1364/OE.521329

Moon, J., Mahravan, E. & Kim, D. (2024). Mutual interaction of a collapsing bubble and a nearby viscoelastic solid. Physical Review Fluids, 9(4), Artikel 043603. https://doi.org/10.1103/PhysRevFluids.9.043603

Spangsberg, E., Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Multiscale Modelling of Heat Transfer in Selective Laser Sintering. engrXiv. https://doi.org/10.31224/4704

Jacobsen, A. N., Mahravan, E., Kragh-Schwarz, M. V., Catalano, J. & Fooroghi, P. (2025). Multiphysics simulations of alkaline water electrolyzer cells — A sensitivity study on the effect of two-phase flow modeling. Electrochimica Acta, 541, Artikel 147148. https://doi.org/10.1016/j.electacta.2025.147148

Mirian, M. H., Silani, M., Akbarzadeh, S. & Aghababaei, R. (2026). Multi-objective optimization of AlCrN coated carbide cutting tools for stress and temperature reduction. Journal of Manufacturing Processes, 158, 205-217. https://doi.org/10.1016/j.jmapro.2025.12.062

Pedersen, S. S., B. Madsen, N., Escalona, J. & Balling, O. (2021). Multibody Models for Tower Vibrations With an Unbalanced Rotor. I 17th International Conference on Multibody Systems, Nonlinear Dynamics, and Control (MSNDC) (Bind 9). Artikel V009T09A017 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2021-72182

Zhang, Z., Zhang, L., Jasa, J., Negahban, M. & Gazonas, G. (2022). Molecular sources of ratcheting in poly-dispersed polycarbonate. International Journal of Fatigue, 154, Artikel 106567. https://doi.org/10.1016/j.ijfatigue.2021.106567

Hansen, C. (2025). Modern Perspectives on Wall-Bounded Turbulence Modeling: Merging Physics-based and Data-Driven Approaches. [Ph.d.-afhandling, Aarhus Universitet].

Schäfer, K., Stroh, A., Forooghi, P. & Frohnapfel, B. (2022). Modelling spanwise heterogeneous roughness through a parametric forcing approach. Journal of Fluid Mechanics, 930, Artikel A7. https://doi.org/10.1017/jfm.2021.850

Ninno, F., Chiastra, C., Colombo, M., Dardik, A., Strosberg, D., Aboian, E., Tsui, J., Bartlett, M., Balabani, S. & Díaz-Zuccarini, V. (2024). Modelling lower-limb peripheral arterial disease using clinically available datasets: impact of inflow boundary conditions on hemodynamic indices for restenosis prediction. Computer Methods and Programs in Biomedicine, 251, Artikel 108214. https://doi.org/10.1016/j.cmpb.2024.108214

Abbiati, G., Gomes, C., Sandberg, M., Kazemi, Z., Hansen, S. T. & Larsen, P. G. (2024). Modelling for Digital Twins. I J. Fitzgerald, C. Gomes & P. G. Larsen (red.), The Engineering of Digital Twins (s. 89-127). Springer. https://doi.org/10.1007/978-3-031-66719-0_5

Alamia, A. & Bruun Andresen, G. (2024). Modelling Alternatives for integrted PtX infrastrcture between Denmark and EU. Poster-session præsenteret på 12th European Open Energy Modelling Workshop, Grenoble, Frankrig.

Lucantonio, A., Nardinocchi, P., Pezzulla, M., Pugliese, V. & Teresi, L. (2013). Modeling Tools for Soft Robotics. Poster-session præsenteret på Soft Robotic Conference, Ascona, Schweiz.

Foldager, F., Munkholm, L. J., Balling, O., Serban, R., Negrut, D., Heck, R. J. & Green, O. (2022). Modeling soil aggregate fracture using the discrete element method. Soil and Tillage Research, 218, Artikel 105295. https://doi.org/10.1016/j.still.2021.105295

Alvandifar, N., Mahravan, E., Christensen, K. G. & Forooghi, P. (2025). Modeling of two-phase CO₂ ejectors using an Eulerian–Eulerian two-fluid approach. International Journal of Refrigeration, 177, 338-350. https://doi.org/10.1016/j.ijrefrig.2025.05.020

Viser resultater 151 til 200 ud af 565

Forrige

Næste

Revideret 22.02.2024

Institut for Mekanik og Produktion