Institut for Mekanik og Produktion

Aarhus Universitets segl
Du er her: Institut for Mekanik og Produktion Forskning Publikationer

Publikationer

Her finder du en samlet liste over de publikationer, som er lavet af medarbejdere ved Institut for Mekanik og Produktion for eksempel tidsskriftsartikler, bøger, rapporter m.v.

Publikationsliste

Sortér efter: Dato | Forfatter | Titel

Aghababaei, R., Malekan, M. & Budzik, M. (2021). Cutting Depth Dictates the Transition from Continuous to Segmented Chip Formation. Physical Review Letters, 127(23), Artikel A202. https://doi.org/10.1103/PhysRevLett.127.235502
Li, J., Zhou, X., Brochu, M., Chekir, N., Sixsmith, J. J. & Zhao, Y. F. (2025). Crystal introducing mechanism in laser wire directed energy deposition fabricated Ti6Al4V. Progress in Additive Manufacturing, 10(2), 1231-1241. https://doi.org/10.1007/s40964-024-00701-1
Hund, J., Cuenca, N. & Andriollo, T. (2026). Crack detection by holomorphic neural networks and transfer-learning-enhanced genetic optimization. Engineering Fracture Mechanics, 338, Artikel 112050. https://doi.org/10.1016/j.engfracmech.2026.112050
Zhou, Z., Yang, X., Wang, H. & Zhang, X. (2022). Coupled dynamic modeling and experimental validation of a collaborative industrial mobile manipulator with human-robot interaction. Mechanism and Machine Theory, 176, Artikel 105025. https://doi.org/10.1016/j.mechmachtheory.2022.105025
Fernandes, R., Greiner, M. & Victoria, M. (2026). Country-specific CO2 management drives EU carbon neutrality with minimal system cost increases. One Earth, 9(1), Artikel 101593. https://doi.org/10.1016/j.oneear.2025.101593
Volk, M., Yuksel, O., Baran, I., Hattel, J. H., Spangenberg, J. & Sandberg, M. (2022). Cost-efficient, automated, and sustainable composite profile manufacture: A review of the state of the art, innovations, and future of pultrusion technologies. Composites Part B: Engineering, 246, Artikel 110135. https://doi.org/10.1016/j.compositesb.2022.110135
Zinck Thellufsen, J., Lund, H., Vad Mathiesen, B., Østergaard, P. A., Sorknæs, P., Nielsen, S., Thøis Madsen, P. & Bruun Andresen, G. (2024). Cost and systems effects of nuclear power in carbon-neutral energy systems. Applied Energy, 371, Artikel 123705. https://doi.org/10.1016/j.apenergy.2024.123705
Gøtske, E. K., Bruun Andresen, G. & Victoria, M. (2023). Cost and Efficiency Requirements for Successful Electricity Storage in a Highly Renewable European Energy System. PRX Energy, 2(2), Artikel 023006. https://doi.org/10.1103/PRXEnergy.2.023006
Farah, S., Bokde, N. & Andresen, G. B. (2024). Cost and CO2 emissions co-optimisation of green hydrogen production in a grid-connected renewable energy system. International Journal of Hydrogen Energy, 84, 164-176. https://doi.org/10.1016/j.ijhydene.2024.08.062
Teixeira de Freitas, S., Roos, L., Papadakis, L., Sena-Cruz, J. & Budzik, M. K. (2022, feb.). COST Action CA18120: Reliable roadmap for certification of bonded primary structures APPLICATION FOR COST GRANTS. EU. https://certbond.eu/wp-content/uploads/Certbond-Guidelines_COST-Grants_v20221114.pdf
Legaard, C. M., Schranz, T., Schweiger, G., Drgona, J., Falay, B., Gomes, C., Iosifidis, A., Abkar, M. & Larsen, P. G. (2023). Constructing Neural Network Based Models for Simulating Dynamical Systems. ACM Computing Surveys, 55(11), 1-34. Artikel 236. https://doi.org/10.1145/3567591
Li, W., Wu, S., Zhu, J., Zhang, L., Zheng, J., Wang, H., Qiu, Y., Xie, G. & Li, C. (2025). Constitutive modelling of time-dependent polymer matrix composites: Incorporating a visco-hyperelastic model into the micromechanical framework. Composite Structures, 366, Artikel 119220. https://doi.org/10.1016/j.compstruct.2025.119220
Budzik, M. K., Athanasiadis, A. & Dias, M. A. (2021). Confined mechanical metamaterials under fracture loading. Abstract fra 6TH INTERNATIONAL CONFERENCE ON ADHESIVE BONDING 2021, Porto, Portugal.
Yang, X. I. A., Zhang, W., Abkar, M. & Anderson, W. (2024). Computational fluid dynamics: Its carbon footprint and role in carbon reduction. Journal of Renewable and Sustainable Energy, 16(5), Artikel 055906. https://doi.org/10.1063/5.0217320
Matsuura, K., Mukai, K. & Langthjem, M. A. (2023). Computational and Experimental Study on the Mechanism of Ring Tone. International Journal of Computational Methods and Experimental Measurements, 11(1), 9-16. https://doi.org/10.18280/ijcmem.110102
Matsuura, K., Mukai, K. & Langthjem, M. A. (2021). Computational and experimental study on ring tone. I S. Hernández & A. Coruña (red.), Advances in Fluid Dynamics with emphasis on Multiphase and Complex Flow (s. 141-151). WIT Press. https://doi.org/10.2495/MPF210121
Ferguson, O. V., Skovsgaard, S. P. H., Jensen, H. M. & Mikkelsen, L. P. (2023). Compressive strength prediction of carbon fiber-reinforced pultruded profiles including realistic volumetric fiber orientations. European Journal of Mechanics A - Solids, 104( Supplement), Artikel 105011. https://doi.org/10.1016/j.euromechsol.2023.105011
van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2022). Composite joint toughening by multiscale architecturing through integrated manufacturing. Abstract fra The 11th European Solid Mechanics , Galway, Irland. file:///C:/Users/au564491/Downloads/vanInnis_esmc2022%20(1).pdf
Si, G., Chen, F. & Zhang, X. (2022). Comparison of the Dynamic Performance of Planar 3-DOF Parallel Manipulators. Machines, 10(4), Artikel 233. https://doi.org/10.3390/machines10040233
Khanna, N., Patel, D., Raval, P., Airao, J., Badheka, V. & Rahman Rashid, R. A. (2024). Comparison of sustainable cooling/lubrication strategies for drilling of wire arc additively manufactured Inconel 625. Tribology International, 200, Artikel 110068. https://doi.org/10.1016/j.triboint.2024.110068
Bibbo, N., Arora, V. & Pedersen, M. M. (2021). Comparison of Findley and MWCM multiaxial fatigue methods using the notch stress method on welded joints. I Procedia Structural Integrity (Bind 31, s. 75-79). Elsevier. https://doi.org/10.1016/j.prostr.2021.03.012
Barettin, D., Madsen, S., Lassen, B. & Willatzen, M. (2011). Comparison of Atomistic and Continuum Quantum-Dot Elastic Models and Implications for Optoelectronic Properties. AIP Conference Proceedings, 1399, 445.
Vallerotto, G., Victoria, M., Jost, N., Askins, S., Dominguez, C., Herrero, R. & Anton, I. (2021). Comparison of achromatic doublet on glass Fresnel lenses for concentrator photovoltaics. Optics Express, 29(13), 20601-20616. https://doi.org/10.1364/OE.428160
Niazi, K. A. K. & Victoria, M. (2023). Comparative analysis of photovoltaic configurations for agrivoltaic systems in Europe. Progress in Photovoltaics, 31(11), 1101-1113. https://doi.org/10.1002/pip.3727
Carlson, D. F., Akbulut, S., Rasmussen, J. F., Hestbech, C. S., Andersen, M. H. & Melvad, C. (2023). Compact and modular autonomous surface vehicle for water research: The Naval Operating Research Drone Assessing Climate Change (NORDACC). HardwareX, 15, Artikel e00453. https://doi.org/10.1016/j.ohx.2023.e00453
Kabachi, M. A., Sandberg, M. & Ermanni, P. (2025). Combined experimental–numerical approach for through-thickness unsaturated permeability characterization of deformable fiber-beds. Composite Structures, 371, Artikel 119396. https://doi.org/10.1016/j.compstruct.2025.119396
Yang, X., Zhou, Z., Li, L. & Zhang, X. (2023). Collaborative robot dynamics with physical human–robot interaction and parameter identification with PINN. Mechanism and Machine Theory, 189, Artikel 105439. https://doi.org/10.1016/j.mechmachtheory.2023.105439
Ulriksen, M. D., Jepsen, M. & Bernal, D. (2023). Closed-loop load vectors for structural damage localization. Mechanical Systems and Signal Processing, 196, Artikel 110321. https://doi.org/10.1016/j.ymssp.2023.110321
Huulgaard, R. D., Mosgaard, M. A., Bundgaard, A. M., Nors, B., Nielsen, S. & Haase, L. M. (2026). Circular Public Procurement of Textiles – A Roadmap. I CEIC proceedings ( Circular Economy - Interdisciplinary Conference 2026)
Calafà, M. (2024). Characterization of the angular coefficient method on 2D and 3D piecewise smooth boundaries. Computational and Applied Mathematics, 43(8), Artikel 450. https://doi.org/10.1007/s40314-024-02969-z
Zhang, B., Endelt, B. & Nielsen, K. B. (2023). Characterization of mechanical properties for tubular materials based on hydraulic bulge test under axial feeding force. Fundamental Research, 3(4), 592-601. https://doi.org/10.1016/j.fmre.2022.01.024
Yang, J., Stroh, A., Bagheri, S., Frohnapfel, B. & Forooghi, P. (2025). Characterization of hydrodynamic and thermal properties of anisotropic irregular roughness. International Journal of Heat and Fluid Flow, 116, Artikel 109888. https://doi.org/10.1016/j.ijheatfluidflow.2025.109888
Rincón, M. J., Reclari, M., Yang, X. & Abkar, M. (2023). CFD-aided morphing and design optimisation of ultrasonic flow meters. I The 14th International ERCOFTAC Symposium on Engineering Turbulence Modelling and Measurements (s. 109-114) https://www.ercoftac.org/etmm/program/conference-program/
Moon, J., Jang, C., Mahravan, E. & Kim, D. (2025). Cavitation bubble-induced hydrodynamic loading and interfacial deformation in an air pocket. Journal of Fluid Mechanics, 1016, Artikel A39. https://doi.org/10.1017/jfm.2025.10398
Bae, J., Won, J., Kim, T., Choi, S., Kim, H., Oh, S. H. V., Lee, G., Lee, E., Jeon, S., Kim, M., Do, H. W., Seo, D., Kim, S., Cho, Y., Kang, H., Kim, B., Choi, H., Han, J., Kim, T. ... Shim, W. (2024). Cation-eutaxy-enabled III–V-derived van der Waals crystals as memristive semiconductors. Nature Materials, 23(10), 1402-1410. https://doi.org/10.1038/s41563-024-01986-x
Oakes, B. J., Zhang, H., Hatledal, L. I., Feng, H., Frasheri, M., Sandberg, M., Gil Arboleda, S. & Gomes, C. (2024). Case Studies in Digital Twins. I J. Fitzgerald, C. Gomes & P. G. Larsen (red.), The Engineering of Digital Twins (s. 257-310). Springer. https://doi.org/10.1007/978-3-031-66719-0_12
Athanasiadis, A., Dias, M. & Budzik, M. K. (2021). Can confined mechanical metamaterials replace adhesives? Extreme Mechanics Letters, 48, Artikel 101411. https://doi.org/10.1016/j.eml.2021.101411
van Innis, C., Budzik, M. K. & Pardoen, T. (2025). Bridging in co-cured composite joints. International Journal of Solids and Structures, 309, Artikel 113194. https://doi.org/10.1016/j.ijsolstr.2024.113194
Strack, D., Chundi, G., Rehtanz, N., Soltani, Z., Pieper, S. D., Pinter, C., Subburaj, K. & Alkalay, R. N. (2026). BoneMesh: An open-source 3D slicer framework for automated mesh generation and material mapping from CT to finite elements. Computer Methods and Programs in Biomedicine, 281, Artikel 109344. https://doi.org/10.1016/j.cmpb.2026.109344
Teixeira de Freitas, S. & Budzik, M. K. (2023). Bondline thickness: Fracture mechanics perspective. I D. A. Dillard (red.), Advances in Structural Adhesive Bonding, Second Edition (2 udg., s. 615-641). Woodhead Publishing. https://doi.org/10.1016/B978-0-323-91214-3.00027-2
Ambrose, H. W., Engelbrecht, N., Alamia, A. & Kofoed, M. V. W. (2025). Biomethanation With Renewable Energy: Harnessing the Carbon-Water-Energy Nexus. Abstract fra 33rd European Biomass Conference & Exhibition , Valencia, Spanien.
Strack, D., Mesbah, M., Kirschke , J. S. & Karupppasamy, S. (2025). Biomechanical Alterations Following Vertebral Fracture: A Patient-Specific L3-L5 Finite Element Analysis. Abstract fra World Congress of Orthopaedic Research, Adelaide, Sydaustralien, Australien. https://doi.org/10.13140/RG.2.2.28212.10884
Cui, H., Zhang, L. & Shi, Y. (2024). Biomaterials-mediated ligation of immune cell surface receptors for immunoengineering. Immuno-Oncology and Technology, 21, Artikel 100695. https://doi.org/10.1016/j.iotech.2023.100695
Anand, M., Panigrahi, S., Kofoed, M. V. W., Aghababaei, R. & Agarwala, S. (2024). Bioinspired poly(vinyl alcohol) films with tunable adhesion and self-healing for biodegradable electronics and beyond. Sustainable Materials and Technologies, 41, Artikel e01084. https://doi.org/10.1016/j.susmat.2024.e01084
Morree, A. D. & Tabula Sapiens Consortium (2025). Benchmarking cell type and gene set annotation by large language models with AnnDictionary. Nature Communications, 16(1), Artikel 9511. https://doi.org/10.1038/s41467-025-64511-x
Darabi, R., Oliveira, J. P., Nemati, N., Reis, A. & de Sá, J. C. (2025). Benchmarking advanced multiphase field modeling of Inconel 625 in additive manufacturing: Correlating powder bed fusion with dendrite growth and crack formation. Materialia, 40, Artikel 102384. https://doi.org/10.1016/j.mtla.2025.102384
Airao, J., Gupta, A., Nirala, C. K. & Hsue, A. W. J. (2024). Bayesian neural networks modeling for tool wear prediction in milling Al 6061 T6 under MQL conditions. International Journal of Advanced Manufacturing Technology, 135(5-6), 2777-2788. https://doi.org/10.1007/s00170-024-14678-2
Bernal, D. & Ulriksen, M. D. (2024). Basis pursuit set selection for nonlinear underconstrained problems: An application to damage characterization. Mechanical Systems and Signal Processing, 216, Artikel 111498. https://doi.org/10.1016/j.ymssp.2024.111498
Wang, C., Zhang, M., He, L., Kan, S., Song, R., Zhao, D., Li, J., Cong, D. & Zhou, X. (2026). Balancing the Competing Effects of Carrier and Phonon Transport Mechanisms to Enhance the Thermoelectric Properties of p-Type Ti2Zr2−xHf2Nb2Fe5.6Ni2.4Sb8 Double Half-Heusler Alloys via Cation Vacancy Engineering. Energy and Environmental Materials, 9(2), Artikel e70170. https://doi.org/10.1002/eem2.70170
Balling, O., Jeppesen, M. R. & Madsen, S. A. (2021). Autonomous vehicle assessment framework. I Proceedings of the Ground Vehicle Systems Engineering and Technology Symposium (GVSETS)

Viser resultater 451 til 500 ud af 584

Forrige

3

4

5

6

7

8

9

10

11

12

Næste

Revideret 22.02.2024
-
Institut for Mekanik og Produktion