Publikationer

Her finder du en samlet liste over de publikationer, som er lavet af medarbejdere ved Institut for Mekanik og Produktion for eksempel tidsskriftsartikler, bøger, rapporter m.v.

Publikationsliste

Sortér efter: Dato | Forfatter | Titel

Zehtabiyan-Rezaie, N., Saffar-Avval, M. & Adamiak, K. (2020). On the evaporation enhancement from saline water due to corona discharge generated EHD flow: A numerical and experimental study. International Communications in Heat and Mass Transfer, 119, Artikel 104988. https://doi.org/10.1016/j.icheatmasstransfer.2020.104988

Ma, L. & Aghababaei, R. (2022). On the Effect of Adhesive Strength and Scratching Depth on Material Transfer During Nanoscale Scratching. Tribology Letters, 70(1), Artikel 26. https://doi.org/10.1007/s11249-021-01558-z

Mula, B. B., Escalona, J., Lambert, R., Ling, R. & Balling, O. (2023). On the definition and effect of optimum gear microgeometry modifications for the gearbox of an offshore 10-MW wind turbine. Wind Energy, 26(7), 717-740. https://doi.org/10.1002/we.2825

L. Jensen, C. S., B. E. Pedersen, R., Mula, B. B., Escalona, J. & Balling, O. (2022). On the Combination of Geometrically Nonlinear Models and Substructuring for Multibody Simulation of Wind Turbine Blades. I 18th International Conference on Multibody Systems, Nonlinear Dynamics, and Control (MSNDC) Artikel DETC2022-90948, V009T09A011 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2022-90948

Sadik, S. & Yavari, A. (2024). On the Balance Laws of Nonlinear Hyperelasticity. ArXiv. arXiv https://doi.org/10.48550/arXiv.2403.14543

Zhu, J., Li, X., Zhou, Q. & Aghababaei, R. (2022). On the anisotropic scratching behavior of single crystalline copper at nanoscale. Tribology International, 175, Artikel 107794. https://doi.org/10.1016/j.triboint.2022.107794

Langthjem, M. A. & Nakano, M. (2021). On the acoustic trapped modes and their symmetry properties in a circular cylindrical waveguide with a cavity. Journal of Engineering Mathematics, 128(1), Artikel 14. https://doi.org/10.1007/s10665-021-10126-2

Rao, S., Budzik, M. K. & Dias, M. A. (2022). On microscopic analysis of fracture in unidirectional composite material using phase field modelling. Composites Science and Technology, 220, Artikel 109242. https://doi.org/10.1016/j.compscitech.2021.109242

E.F. Athanasiadis, A., Budzik, M. K., Fernando, D. & Dias, M. A. (2024). On micropolar elastic foundations. European Journal of Mechanics A - Solids, 105, Artikel 105277. https://doi.org/10.1016/j.euromechsol.2024.105277

Langthjem, M. A. & Jensen, H. M. (2024). On matched asymptotic expansion solutions of a bucklewave propagation problem. Zeitschrift fuer Angewandte Mathematik und Mechanik, 1. Artikel zamm.202300655. https://doi.org/10.1002/zamm.202300655

Sadik, S., Walker, M. G. & Dias, M. A. (2022). On local kirigami mechanics II: Stretchable creased solutions. Journal of the Mechanics and Physics of Solids, 161, Artikel 104812. https://doi.org/10.1016/j.jmps.2022.104812

Sadik, S. & Dias, M. A. (2021). On local kirigami mechanics I: Isometric conical solutions. Journal of the Mechanics and Physics of Solids, 151, Artikel 104370. https://doi.org/10.1016/j.jmps.2021.104370

Filsoof, O. T., Yde, A., Bøttcher, P. & Zhang, X. (2021). On critical aeroelastic modes of a tri-rotor wind turbine. International Journal of Mechanical Sciences, 204, Artikel 106525. https://doi.org/10.1016/j.ijmecsci.2021.106525

Abu-Ghaida, H., Leka, S., Kunrath, K., Thostrup, R. & Ramanujan, D. (2021). Økoengineer – A Web-Based Game Platform for Guided Discovery-Based Sustainability Learning in Engineering Curricula. I 18th International Conference on Design Education (DEC): 18th International Conference on Design Education (DEC) (Bind 4). Artikel DETC2021-69406, V004T04A014 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2021-69406

Šeta, B., Sandberg, M., Brander, M., Mollah, M. T., Pokkalla, D. K., Kumar, V. & Spangenberg, J. (2024). Numerical modeling of fiber orientation in multi-layer, isothermal material-extrusion big area additive manufacturing. Additive Manufacturing, 92, Artikel 104396. https://doi.org/10.1016/j.addma.2024.104396

Zehtabiyan-Rezaie, N., Saffar-Avval, M. & Adamiak, K. (2018). Numerical investigation of water surface deformation due to corona discharge. Journal of Electrostatics, 96, 151-159. https://doi.org/10.1016/j.elstat.2018.10.015

Zehtabiyan-Rezaie, N., Mirzaei, M. & Saffar-Avval, M. (2017). Numerical Investigation of Magnetic Field Effect on Heat Transfer and Entropy Generation in Channel; New Approach for Fluid and Length Scale Selections. Heat Transfer Engineering, 38(13), 1222-1232. https://doi.org/10.1080/01457632.2016.1239961

Zheng, W., Ma, L., Pei, S. & Aghababaei, R. (2024). Numerical assessment of transition in cutting mode and its effect on roughness creation. International Journal of Mechanical Sciences, 261, Artikel 108666. https://doi.org/10.1016/j.ijmecsci.2023.108666

Farhadiyadkuri, F. & Zhang, X. (2023). Novel Interaction Control in Adolescent Idiopathic Scoliosis Treatment Using a Robotic Brace. Journal of Intelligent and Robotic Systems: Theory and Applications, 109(3), Artikel 73. https://doi.org/10.1007/s10846-023-02010-1

Sujon, M. A. S., Masato, D., Andriollo, T., Pan, Z., Nadimpalli, V. K., Henriquez, V. C. & Islam, A. (2024). Novel approach for optimizing mechanical and damping performance of MABS composites reinforced with basalt fibers: An experimental study. Composites Science and Technology, 251, Artikel 110578. https://doi.org/10.1016/j.compscitech.2024.110578

Sadik, S. & Yavari, A. (2024). Nonlinear anisotropic viscoelasticity. Journal of the Mechanics and Physics of Solids, 182, Artikel 105461. https://doi.org/10.1016/j.jmps.2023.105461

Brandt, A. (2023). Noise and Vibration Analysis: Signal Analysis and Experimental Procedures. (2 udg.) Wiley. https://doi.org/10.1002/9781118962176

Alimadadi, H., Kjartansdóttir, C., Burrows, A., Kasama, T. & Møller, P. (2017). Nickel-aluminum diffusion: A study of evolution of microstructure and phase. Materials Characterization, 130, 105-112.

Møller, C. (2009). Next-Generation Enterprise Systems. I Encyclopaedia of Information Science and Technology (2 udg., Bind 6, s. 2821-2826). Idea Group Publishing. https://www.igi-global.com/chapter/next-generation-enterprise-systems/13989

Bazmohammadi, N., Madary, A., Vasquez, J. C. & Guerrero, J. M. (2024). New Horizons for Control and Energy Management of Closed-Ecological Systems. IEEE Industrial Electronics Magazine. https://doi.org/10.1109/MIE.2024.3437341

Andriollo, T. (2022). Network science approach to predict the yield strength of metals containing soft particles and pores. I O P Conference Series: Materials Science and Engineering, 1249, Artikel 012018. https://doi.org/10.1088/1757-899X/1249/1/012018

Andriollo, T., Kouznetsova, V. & Alessandretti, L. (2022). Network approach for the analysis of the irreversible deformation of solids with soft heterogeneities. Physical Review Materials, 6(11), Artikel L110601 . https://doi.org/10.1103/PhysRevMaterials.6.L110601

Mitra, T., singh, G., Darki, A. A., Madsen, S. P. & Dantan, A. R. (2024). Narrow-linewidth Fano microcavities with resonant subwavelength grating mirror. Optics Express, 32(9), 15667-15679. https://doi.org/10.1364/OE.521329

Moon, J., Mahravan, E. & Kim, D. (2024). Mutual interaction of a collapsing bubble and a nearby viscoelastic solid. Physical Review Fluids, 9(4), Artikel 043603. https://doi.org/10.1103/PhysRevFluids.9.043603

Pedersen, S. S., B. Madsen, N., Escalona, J. & Balling, O. (2021). Multibody Models for Tower Vibrations With an Unbalanced Rotor. I 17th International Conference on Multibody Systems, Nonlinear Dynamics, and Control (MSNDC) (Bind 9). Artikel DETC2021-72182, V009T09A017 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2021-72182

Zhang, Z., Zhang, L., Jasa, J., Negahban, M. & Gazonas, G. (2022). Molecular sources of ratcheting in poly-dispersed polycarbonate. International Journal of Fatigue, 154, Artikel 106567. https://doi.org/10.1016/j.ijfatigue.2021.106567

Schäfer, K., Stroh, A., Forooghi, P. & Frohnapfel, B. (2022). Modelling spanwise heterogeneous roughness through a parametric forcing approach. Journal of Fluid Mechanics, 930, Artikel A7. https://doi.org/10.1017/jfm.2021.850

Ninno, F., Chiastra, C., Colombo, M., Dardik, A., Strosberg, D., Aboian, E., Tsui, J., Bartlett, M., Balabani, S. & Díaz-Zuccarini, V. (2024). Modelling lower-limb peripheral arterial disease using clinically available datasets: impact of inflow boundary conditions on hemodynamic indices for restenosis prediction. Computer Methods and Programs in Biomedicine, 251, Artikel 108214. https://doi.org/10.1016/j.cmpb.2024.108214

Alamia, A. & Bruun Andresen, G. (2024). Modelling Alternatives for integrted PtX infrastrcture between Denmark and EU. Poster session præsenteret på 12th European Open Energy Modelling Workshop, Grenoble, Frankrig.

Lucantonio, A., Nardinocchi, P., Pezzulla, M., Pugliese, V. & Teresi, L. (2013). Modeling Tools for Soft Robotics. Poster session præsenteret på Soft Robotic Conference, Ascona, Schweiz.

Foldager, F., Munkholm, L. J., Balling, O., Serban, R., Negrut, D., Heck, R. J. & Green, O. (2022). Modeling soil aggregate fracture using the discrete element method. Soil and Tillage Research, 218, Artikel 105295. https://doi.org/10.1016/j.still.2021.105295

Chen, M., Alimadadi, H., Molin, S., Zhang, L., Ta, N., Hendriksen, P. V., Kiebach, R. & Du, Y. (2017). Modeling of Ni diffusion induced austenite formation in ferritic stainless steel interconnects. Journal of The Electrochemical Society, 164(9), F1005.

Pedersen, T. T., Victoria, M., Rasmussen, M. G. & Bruun Andresen, G. (2021). Modeling all alternative solutions for highly renewable energy systems. Energy, 234, Artikel 121294. https://doi.org/10.1016/j.energy.2021.121294

Pedersen, T. T., Victoria, M., Rasmussen, M. G. & Bruun Andresen, G. (2021). Modeling all alternative solutions for highly renewable energy systems. Abstract fra International Energy Workshop (IEW) 2021, Tyskland.

Eidi, A., Ghiassi, R., Yang, X. I. A. & Abkar, M. (2021). Model-form uncertainty quantification in RANS simulations of wakes and power losses in wind farms. Renewable Energy, 179, 2212-2223. https://doi.org/10.1016/j.renene.2021.08.012

Cleve, J., Greiner, M., Enevoldsen, P., Birkemose, B. & Jensen, L. (2009). Model-based analysis of wake-flow data in the Nysted offshore wind farm. Wind Energy, 12(2), 125-135. https://doi.org/10.1002/we.314

Filsoof, O. T. (2021). Modal Dynamics and Design Analysis of Multi‐Rotor Wind Turbines. Århus Universitet.

Wang, H. & Zhang, X. (2021). Modal Dynamic Modelling and Experimental Validation of a Curved Extensible Continuum Manipulator. 1958-1965. Afhandling præsenteret på 2021 IEEE International Conference on Robotics and Automation (ICRA). https://doi.org/10.1109/ICRA48506.2021.9561914

Nemati, N., Manhard, A., Greuner, H., Hunger, K., Böswirth, B., Visca, E. & You, J. H. (2023). Microstructural evolution of tungsten under thermal loads: A comparative study between cyclic high heat flux loading and isochronous furnace heating. Nuclear Materials and Energy, 36, Artikel 101465. https://doi.org/10.1016/j.nme.2023.101465

Wieber, C., Jeppesen, M. R., Finster, K., Melvad, C. & Santl-Temkiv, T. (2024). Micro-PINGUIN: microtiter-plate-based instrument for ice nucleation detection in gallium with an infrared camera. Atmospheric Measurement Techniques, 17(9), 2707–2719. https://doi.org/10.5194/amt-17-2707-2024

Aghababaei, R. & Zhao, K. (2021). Micromechanics of material detachment during adhesive wear: A numerical assessment of Archard's wear model. Wear, 476, Artikel 203739. https://doi.org/10.1016/j.wear.2021.203739

Dias, M. A., Athanasiadis, A., Fernando, D. N. & Budzik, M. K. (2023). Micromechanics of architected interfaces. 73. Abstract fra International Conference on Adhesive Bonding 2023, Porto, Portugal.

Bazmohammadi, N., Madary, A., Quintero, J. C. V., Bazmohammadi, H., Khan, B., Wu, Y. & Guerrero, J. M. (2022). Microgrid Digital Twins: Concepts, Applications, and Future Trends. IEEE Access, 10, 2284-2302. https://doi.org/10.1109/ACCESS.2021.3138990

Doll, U., Burow, E., Stockhausen, G. & Willert, C. (2016). Methods to improve pressure, temperature and velocity accuracies of filtered Rayleigh scattering measurements in gaseous flows. Measurement Science and Technology, 27(12), Artikel 125204. https://doi.org/10.1088/0957-0233/27/12/125204

Alameen, E. H. O., Lucantonio, A. & DeSimone, A. (2023). Mechanics and transient morphing of soft hygroscopic bilayers. Mechanics Research Communications, 131, Artikel 104131. https://doi.org/10.1016/j.mechrescom.2023.104131

Viser resultater 101 til 150 ud af 385

Forrige

Næste

AU Engineering Profile

Download AU Engineering Profile 2013-2022:

Revideret 22.02.2024

Institut for Mekanik og Produktion