Publikationer

Her finder du en samlet liste over de publikationer, som er lavet af medarbejdere ved Institut for Mekanik og Produktion for eksempel tidsskriftsartikler, bøger, rapporter m.v.

Publikationsliste

Sortér efter: Dato | Forfatter | Titel

Hansen, C., I.A. Yang, X. & Abkar, M. (2023). A POD-mode-augmented wall model and its applications to flows at non-equilibrium conditions. Journal of Fluid Mechanics, 975, Artikel A24. https://doi.org/10.1017/jfm.2023.857

Hansen, C., Sørensen, J. N., I. A. Yang, X. & Abkar, M. (2024). Extension of the law of the wall exploiting weak similarity of velocity fluctuations in turbulent channels. Physics of Fluids, 36(1), Artikel 015134. https://doi.org/10.1063/5.0185334

Hansen, J. G. & de Figueiredo, R. P. (2024). Active Object Detection and Tracking Using Gimbal Mechanisms for Autonomous Drone Applications. Drones, 8(2), Artikel 55. https://doi.org/10.3390/drones8020055

Hansen, C., Yang, X. I. A. & Abkar, M. (2026). Wall-modeled large-eddy simulation of turbulent smooth body separation using the OpenFOAM flow solver. Journal of Fluids Engineering, Transactions of the ASME, 148(1), Artikel 011502. https://doi.org/10.1115/1.4068997

Hansen, C. (2025). Modern Perspectives on Wall-Bounded Turbulence Modeling: Merging Physics-based and Data-Driven Approaches. [Ph.d.-afhandling, Aarhus Universitet].

Haegel, N. M., Verlinden, P., Victoria, M., Altermatt, P., Atwater, H., Barnes, T., Breyer, C., Case, C., De Wolf, S., Deline, C., Dharmrin, M., Dimmler, B., Gloeckler, M., Goldschmidt, J. C., Hallam, B., Haussener, S., Holder, B., Jaeger, U., Jaeger-Waldau, A. ... W. Bett, A. (2023). Photovoltaics at multi-terawatt scale: Waiting is not an option: 25% annual PV growth is possible over the next decade. Science, 380(6640), 39-42. https://doi.org/10.1126/science.adf6957

Haase, L. M., Nielsen, S., Nors, B. & Bakker, C. (2026). Sorting out the Messiness of Green, Circular, and Sufficiency Approaches for Sustainability within Design. Manuskript afsendt til publicering.

Gøtske, E. K. & Victoria, M. (2021). Future operation of hydropower in Europe under high renewable penetration and climate change. iScience, 24(9), Artikel 102999. https://doi.org/10.1016/j.isci.2021.102999

Gøtske, E. K., Bruun Andresen, G. & Victoria, M. (2023). Cost and Efficiency Requirements for Successful Electricity Storage in a Highly Renewable European Energy System. PRX Energy, 2(2), Artikel 023006. https://doi.org/10.1103/PRXEnergy.2.023006

Gøtske, E. K., Andresen, G. B., Neumann, F. & Victoria, M. (2024). Designing a sector-coupled European energy system robust to 60 years of historical weather data. Nature Communications, 15(1), Artikel 10680. https://doi.org/10.1038/s41467-024-54853-3

Gøtske, E. K. (2024). Energy storage and climate impacts on the future renewable European energy system. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus Universitet.

Gøtske, E. K., Pratama, Y., Andresen, G. B., Gidden, M. J., Victoria, M. & Zakeri, B. (2025). First steps towards bridging integrated assessment modeling and high-resolution energy system models: a scenario matrix for a low-emissions sector-coupled European energy system. Environmental Research Communications, 7(8), Artikel 085010. https://doi.org/10.1088/2515-7620/adf60d

Glisic, M., Veluri, B. & Ramanujan, D. (2021). A Reusable Unit Process Life Cycle Inventory Model for Infeed Centerless Grinding. I 26th Design for Manufacturing and the Life Cycle Conference (DFMLC): 26th Design for Manufacturing and the Life Cycle Conference (DFMLC) (Bind 5). Artikel DETC2021-69609, V005T05A025 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2021-69609

Glisic, M., Sarfraz, S., Veluri, B. & Ramanujan, D. (2022). A Systematic Framework for Quantifying Production System-Specific Challenges in Life Cycle Inventory Data Collection. Procedia CIRP, 105, 210-218. https://doi.org/10.1016/j.procir.2022.02.035

Glisic, M., Veluri, B. & Ramanujan, D. (2024). A Bottom-Up Methodology for Identifying Key Performance Indicators for Sustainability Monitoring of Unit Manufacturing Processes. Sustainability, 16(2), Artikel 806. https://doi.org/10.3390/su16020806

Glisic, M., Møller, C., Veluri, B. & Ramanujan, D. (2024). Digital Process Passport: A Conceptual Model for Information Collection and Sharing In Sustainable Manufacturing. Procedia CIRP, 130(27), 1077-1083. https://doi.org/10.1016/j.procir.2024.10.209

Glisic, M. (2023). Guiding production planning to improve manufacturing process inventory data collection and modelling. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus Universitet.

Giauque, A., Giguet, C., Vadrot, A. & Corre, C. (2024). A priori test of Large-Eddy Simulation models for the Sub-Grid Scale turbulent stress tensor in perfect and transcritical compressible real gas Homogeneous Isotropic Turbulence. Computers and Fluids, 268, Artikel 106091. https://doi.org/10.1016/j.compfluid.2023.106091

Ghoul, A., Djeffal, S., Wang, H., Kara, K. & Hadjili, M. L. (2025). Enhancing Surgical Robotics: A Dynamic Model and Optimized Control Strategy for Cable-Driven Continuum Robots. Journal of Mechanisms and Robotics, 17(2), Artikel 021002. https://doi.org/10.1115/1.4065698

Ghasemi, A., Sadough Vanini, S. A., Alizadeh Zolbin, M. & Aghababaei, R. (2024). Exploring the influence of ultrasonic peening treatment at ambient and cryogenic conditions on the surface characteristics and fatigue life of austenitic stainless steel 304L. Surface and Coatings Technology, 494(Part 1 ), Artikel 131382. https://doi.org/10.1016/j.surfcoat.2024.131382

Gennis, S., Pezzulla, M. & Jensen, K. H. (2026). Mechanical limits shape the eccentric form of rose prickles. Journal of the Royal Society, Interface, 23(241), Artikel 20251300. https://doi.org/10.1098/rsif.2025.1300

Geckeler, C., Kirchgeorg, S., Strunk, G., Thostrup, F. B., Sangermano, F., Desiderato, A., Lüthi, M., Jucker, M., Gonzalez Herrera, M. A., Franco-Sierra, N. D., Pulido-Santacruz, P., Marc Chang, J. J., Aden Ip, Y. C., Mächler, E., Svenning, A., Mougeot, G., Høye, T. T., Fopp, F., Pellissier, L. ... Mintchev, S. (2025). Field Deployment of BiodivX Drones in the Amazon Rainforest for Biodiversity Monitoring. IEEE Transactions on Field Robotics, 2, 336-352. https://doi.org/10.1109/TFR.2025.3574945

Gautam, K. R., Bruun Andresen, G. & Victoria, M. (2022). Review and Techno-Economic Analysis of Emerging Thermo-Mechanical Energy Storage Technologies. Energies, 15(17), Artikel 6328. https://doi.org/10.3390/en15176328

Gautam, K. R. & Andresen, G. B. (2026). Do dynamic electricity prices make dynamic homes? Lessons from Norway. Applied Energy, 421, Artikel 128262. https://doi.org/10.1016/j.apenergy.2026.128262

Garg, H., Ledda, P. G., Skov Pedersen, J. & Pezzulla, M. (2024). Passive Viscous Flow Selection via Fluid-Induced Buckling. Physical Review Letters, 133(8), Artikel 084001. https://doi.org/10.1103/PhysRevLett.133.084001

Gao, X., Zhang, Y., Haahr-Lillevang, L., Vedel-Smith, N. K. & Andriollo, T. (2023). 3D strain pattern in additively manufactured AlSi10Mg from digital volume correlation. Heliyon, 9(12), Artikel e23186. https://doi.org/10.1016/j.heliyon.2023.e23186

Gallego-Castillo, C. & Victoria, M. (2025). PyPSA-Spain: An extension of PyPSA-Eur to model the Spanish energy system. Energy Strategy Reviews, 60, Artikel 101764. https://doi.org/10.1016/j.esr.2025.101764

Gad Kjeld, J., Avendaño-Valencia, L. D., Brandt, A., Christensen, S. S. & Karottki Falk Andersen, J. (2023). Towards minimal empirical uncertainty bounds of damping estimates of an offshore wind turbine in idling conditions. Mechanical Systems and Signal Processing, 191, Artikel 110180. https://doi.org/10.1016/j.ymssp.2023.110180

Fulco, S., Budzik, M. K., Xiao, H., Durian, D. J. & Turner, K. T. (2025). Disorder enhances the fracture toughness of 2D mechanical metamaterials. PNAS Nexus, 4(2), Artikel pgaf023. https://doi.org/10.1093/pnasnexus/pgaf023

Fulco, S., Budzik, M. K. & Turner, K. (2026). Tailoring toughness and adhesion through architected interfaces. npj Metamaterials, 2, 1-10. Artikel 5. https://doi.org/10.1038/s44455-025-00014-5

Fulco, S., Purohit, P. K., Budzik, M. K. & Turner, K. T. (2026). Failure of disordered and stochastic lattice materials. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 482(2340), Artikel 20250993. https://doi.org/10.1098/rspa.2025.0993

Fulco , S., Budzik, M. K. & Turner, K. (2022). Exploiting architected plasticity to enhance fracture toughness while maintaining strength. Abstract fra 19th U.S. National Congress of Theoretical and Applied

Mechanics, Austin, Texas, USA. https://drive.google.com/file/d/1uyFLy4Pk62paHMze4hVJSe7VnknWq1hT/view

Fulco , S., Budzik, M. K., D. Bain , E. & T. Turner , K. (2022). Decoupling toughness and strength through architected plasticity. Extreme Mechanics Letters, 57, Artikel 101912. https://doi.org/10.1016/j.eml.2022.101912

Fulco , S., Budzik, M. K. & T. Turner , K. T. (2024). Enhancing toughness through geometric control of the process zone. Journal of the Mechanics and Physics of Solids, 184, Artikel 105548. https://doi.org/10.1016/j.jmps.2024.105548

Fuentes, J., Guix, M., Cenev, Z. M., Bakenecker, A. C., Ruiz-González, N., Beaune, G., Timonen, J. V. I., Sanchez, S. & Magdanz, V. (2025). Ferrofluid-Based Bioink for 3D Printed Skeletal Muscle Tissues with Enhanced Force and Magnetic Response. Advanced Materials Interfaces, 12(13), Artikel 2400824. https://doi.org/10.1002/admi.202400824

Fristed, F., Tønning, S., Xie, Z., Langer, L. & Bruun Andresen, G. (2025). Early cross-sector decarbonisation for Europe's hard-to-abate sectors: Insights from Denmark's 2030 target. Applied Energy, 401(Part A), Artikel 126568. https://doi.org/10.1016/j.apenergy.2025.126568

Friis, S. J., Strøm Hansen, T., Olesen, C. G., Poulsen, M., Gregersen, H. & Nygaard, J. V. (2025). Experimental and numerical study of solid needle insertions into human stomach tissue. Journal of the Mechanical Behavior of Biomedical Materials, 162, Artikel 106832. https://doi.org/10.1016/j.jmbbm.2024.106832

Frandsen, L. N., Kristensen, C. K., Haahr-Lillevang, L., Klingaa, C. G., Mohanty, S. & Pedersen, M. M. (2023). A method for developing predictive models of quality metrics and gas flow variables for 316L PBF-LB/M printed components based on image analysis. I O. Riemer, C. Nisbet & D. Phillips (red.), European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 23rd International Conference and Exhibition, EUSPEN 2023: Copenhagen 2023 (s. 115-118). Euspen.

Forooghi, A., Miralizadeh Jalalat, S., Andriollo, T. & Ruocco, E. (2026). Assessment of physics-informed neural networks for beam bending problems in structural mechanics. Engineering with Computers, 42(4), Artikel 138. https://doi.org/10.1007/s00366-026-02375-5

Formentini, G. & Ramanujan, D. (2023). Design for circular disassembly: Evaluating the impacts of product end-of-life status on circularity through the parent-action-child model. Journal of Cleaner Production, 405, Artikel 137009. https://doi.org/10.1016/j.jclepro.2023.137009

Formentini, G. & Ramanujan, D. (2023). Accounting For Product End-of-Life Status in Disassembly Time Estimation Using Modified Maynard Operation Sequences. Procedia CIRP, 116, 305-311. https://doi.org/10.1016/j.procir.2023.02.052

Formentini, G. & Ramanujan, D. (2023). EXAMINING THE ROLE AND FUTURE POTENTIAL OF DESIGN FOR DISASSEMBLY METHODS TO SUPPORT CIRCULAR PRODUCT DESIGN. Proceedings of the Design Society, 3, 1735 - 1744. https://doi.org/10.1017/pds.2023.174

Formentini, G., Martiny, T. A., Møller, C., Vernica, T. & Ramanujan, D. (2024). Assessing the disassembly performance of washing machines through the design for circular disassembly methodology. Proceedings of the Design Society, 4, 1249-1258. https://doi.org/10.1017/pds.2024.127

Formentini, G., Prioli, J. PJ., Ko, J., Hapuwatte, B., Ferrero, V., Badurdeen, F., Rickli, J. L. & Ramanujan, D. (2025). A review of disassembly systems for circular product design. Journal of Cleaner Production, 506, Artikel 145459. https://doi.org/10.1016/j.jclepro.2025.145459

Fontana, A., Sorlini, M., Leone, D., Rossi, L., Dell’Ambrogio, S., Nika, J., Koppelaar, R., Pamidi, S., Ramanujan, D. & Formentini, G. (2024). An Integrated Life Cycle Sustainability Assessment Framework for Product Life Cycle-Oriented Decision-Making. I A. I. I. Stefanakis & I. E. Nikolaou (red.), Circular Economy and Sustainable Development: A Necessary Nexus for a Sustainable Future (s. 289–317). Springer. https://doi.org/10.1007/978-3-031-66007-8_17

Foldager, F. F., Thule, C., Balling, O. & Larsen, P. G. (2021). Towards a Digital Twin - Modelling an Agricultural Vehicle. I T. Margaria & B. Steffen (red.), Leveraging Applications of Formal Methods, Verification and Validation: 9th International Symposium on Leveraging Applications of Formal Methods, ISoLA 2020, Rhodes, Greece, October 20–30, 2020, Proceedings, Part IV (s. 109-123). Springer. https://doi.org/10.1007/978-3-030-83723-5_8

Foldager, F., Munkholm, L. J., Balling, O., Serban, R., Negrut, D., Heck, R. J. & Green, O. (2022). Modeling soil aggregate fracture using the discrete element method. Soil and Tillage Research, 218, Artikel 105295. https://doi.org/10.1016/j.still.2021.105295

Foldager, F. (2021). Physics-based modeling and simulation of agricultural machine-soil interaction. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus Universitet.

Filsoof, O. T., Yde, A., Bøttcher, P. & Zhang, X. (2020). Experimental Analysis of a Scaled-Down Vestas Four-Rotor Wind Turbine. Journal of Physics: Conference Series, 1618(3), Artikel 032005. https://doi.org/10.1088/1742-6596/1618/3/032005

Filsoof, O. T., Yde, A., Bøttcher, P. & Zhang, X. (2021). On critical aeroelastic modes of a tri-rotor wind turbine. International Journal of Mechanical Sciences, 204, Artikel 106525. https://doi.org/10.1016/j.ijmecsci.2021.106525

Viser resultater 401 til 450 ud af 615

Forrige

Næste

Revideret 22.02.2024

Institut for Mekanik og Produktion