Publikationer

Her finder du en samlet liste over de publikationer, som er lavet af medarbejdere ved Institut for Mekanik og Produktion for eksempel tidsskriftsartikler, bøger, rapporter m.v.

Publikationsliste

Sortér efter: Dato | Forfatter | Titel

Song, M., Christensen, S. S., Moaveni, B., Brandt, A. & Hines, E. (2022). Joint parameter-input estimation for virtual sensing on an offshore platform using output-only measurements. Mechanical Systems and Signal Processing, 170, Artikel 108814. https://doi.org/10.1016/j.ymssp.2022.108814

Søgaard Kristensen, A., Kruse Sørensen, E., Madsen, C., Kristofersson, J. & Forooghi, P. (2023). Performance analysis of heat pumps with zeotropic mixtures at different load conditions. International Journal of Refrigeration, 145, 264-275. https://doi.org/10.1016/j.ijrefrig.2022.09.028

Skovsgaard, S. P. H. & Heide-Jørgensen, S. (2021). Three-dimensional mechanical behavior of composite with fibre-matrix delamination through homogenization of micro-structure. Composite Structures, 275, Artikel 114418. https://doi.org/10.1016/j.compstruct.2021.114418

Sivebaek, I. M., Aghababaei, R. & Espallargas, N. (2024). Editorial: Selected papers from NORDTRIB 2022. Wear, 544-545, Artikel 205183. https://doi.org/10.1016/j.wear.2023.205183

singh, G., Mitra, T., Madsen, S. P. & Dantan, A. R. (2024). Highly reflective and high-Q thin resonant subwavelength gratings. Journal of Physics: Photonics, 6(4), Artikel 045009. https://doi.org/10.1088/2515-7647/ad70e7

Sibani, P., Rasmussen, S. & Hansen, P. L. (2022). Human wealth evolution is an accelerating expansion underpinned by a decelerating optimization process. Physica A: Statistical Mechanics and its Applications, 608, Artikel 128286. https://doi.org/10.1016/j.physa.2022.128286

Si, G., Sun, L., Zhang, Z. & Zhang, X. (2021). Design, Fabrication, and Testing of a Novel 3D 3-Fingered Electrothermal Microgripper with Multiple Degrees of Freedom. Micromachines, 12(4), Artikel 444. https://doi.org/10.3390/mi12040444

Si, G., Sun, L., Zhang, Z. & Zhang, X. (2021). Theoretical thermal-mechanical modelling and experimental validation of a three-dimensional (3D) electrothermal microgripper with three fingers. Micromachines, 12(12), Artikel 1512. https://doi.org/10.3390/mi12121512

Si, G., Chen, F. & Zhang, X. (2022). Comparison of the Dynamic Performance of Planar 3-DOF Parallel Manipulators. Machines, 10(4), Artikel 233. https://doi.org/10.3390/machines10040233

Si, G., Ding, M., Zhang, Z. & Zhang, X. (2022). Theoretical thermal-mechanical modelling and experimental validation of a novel 3D three-fingered electrothermal microgripper. Precision Engineering, 77, 205-219. https://doi.org/10.1016/j.precisioneng.2022.05.013

Si, G., Zhou, F., Zhang, Z. & Zhang, X. (2022). Tracking Multiple Zebrafish Larvae Using YOLOv5 and DeepSORT. I 2022 8th International Conference on Automation, Robotics and Applications, ICARA 2022 (s. 228-232). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICARA55094.2022.9738556

Si, G., Zhao, Z., Zhang, Z. & Zhang, X. (2024). Design and Experimental Investigation of a Force Sensor for a 3-D Electrothermal Microgripper. IEEE Sensors Journal, 24(3), 2934-2944. https://doi.org/10.1109/JSEN.2023.3336214

Si, G., Zhang, H., Zhang, Z. & Zhang, X. (2024). Enabling intuitive and effective micromanipulation: A wearable exoskeleton-integrated macro-to-micro teleoperation system with a 3D electrothermal microgripper. Robotics and Autonomous Systems, 181, Artikel 104776. https://doi.org/10.1016/j.robot.2024.104776

Shojaeifard, M., Ferraresso, M., Lucantonio, A. & Bacca, M. (2025). Machine learning-based optimal design of fibrillar adhesives. Journal of the Royal Society Interface, 22(223), Artikel 20240636. https://doi.org/10.1098/rsif.2024.0636

Shkondin, E., Alimadadi, H., Takayama, O., Jensen, F. & Lavrinenko, A. V. (2020). Fabrication of hollow coaxial Al2O3/ZnAl2O4 high aspect ratio freestanding nanotubes based on the Kirkendall effect. Journal of Vacuum Science Technology A: Vacuum, Surfaces, and Films, 38(1), 013402. Artikel 013402.

Shehab, E., Meiirbekov, A., Amantayeva, A., Suleimen, A., Tokbolat, S. & Sarfraz, S. (2021). A cost modelling system for recycling carbon fiber-reinforced composites. Polymers, 13(23), Artikel 4208. https://doi.org/10.3390/polym13234208

Shehab, E., Meiirbekov, A., Amantayeva, A., Suleimen, A., Tokbolat, S., Sarfraz, S. & Ali, M. H. (2021). A fuzzy logic-based cost modelling system for recycling carbon fibre reinforced composites. Polymers, 13(24), Artikel 4370. https://doi.org/10.3390/polym13244370

Shao, K., Wang, T. & Wu, M. (2025). Abrasion Damage of Concrete for Hydraulic Structures after Exposure to Freeze-thaw Cycles. IOP Conference Series: Earth and Environmental Science, 1450(1), Artikel 012001. https://doi.org/10.1088/1755-1315/1450/1/012001

Šeta, B., Sandberg, M., Brander, M., Tusher Mollah, M., Pokkalla, D., Kumar, V. & Spangenberg, J. (2023). Modeling fiber orientation and strand shape morphology in three-dimensional material extrusion additive manufacturing. Composites Part B: Engineering, 266, Artikel 110957. https://doi.org/10.1016/j.compositesb.2023.110957

Šeta, B., Sandberg, M., Brander, M., Mollah, M. T., Pokkalla, D. K., Kumar, V. & Spangenberg, J. (2024). Numerical modeling of fiber orientation in multi-layer, isothermal material-extrusion big area additive manufacturing. Additive Manufacturing, 92, Artikel 104396. https://doi.org/10.1016/j.addma.2024.104396

Schwenk-Nebbe, L. J., Victoria, M. & Bruun Andresen, G. (2021). Dataset: A proxy for historical CO2 emissions related to centralised electricity generation in Europe. Data in Brief, 36, Artikel 107016. https://doi.org/10.1016/j.dib.2021.107016

Schwenk-Nebbe, L. J. (2022). Heterogeneous Carbon Dioxide Emission Constraints in the European Energy System. Århus Universitet.

Schwenk-Nebbe, L. J., Vind, J. E., Backhaus, A. J., Victoria, M. & Greiner, M. (2022). Principal spatiotemporal mismatch and electricity price patterns in a highly decarbonized networked European power system. iScience, 25(6), Artikel 104380. https://doi.org/10.1016/j.isci.2022.104380

Schmiegel, J. & Pons, F. (2021). Stochastic Intermittency Fields in a von Karman Experiment. Symmetry, 13(9), Artikel 1752. https://doi.org/10.3390/sym13091752

Schäfer, K., Stroh, A., Forooghi, P. & Frohnapfel, B. (2022). Modelling spanwise heterogeneous roughness through a parametric forcing approach. Journal of Fluid Mechanics, 930, Artikel A7. https://doi.org/10.1017/jfm.2021.850

Sawant , M., Thakare, S., Rao, A. P., Feijóo Lorenzo, A. E. & Bokde, N. (2021). A Review on State-of-the-Art Reviews in Wind-Turbine- and Wind-Farm-Related Topics. Energies, 14(8), Artikel 2041. https://doi.org/10.3390/en14082041

Sanz Cuadrado, C., Cristóbal, A. B., Zhang, Z., Rahdan, P. & Victoria, M. (2022). Achieving a New European Energy Awareness (AURORA): Deliverable 1.1 – Near-Zero Emissions Citizens Label. https://www.aurora-h2020.eu/wp-content/uploads/2022/09/D1.1-Near-Zero-Emission-Citizens-Label-PU.pdf

Sandhu, K., Sarkar, P. & Karupppasamy, S. (2025). Understanding entrepreneurial thinking for designers: Perspectives from entrepreneurs, academicians, product designers, and students. Thinking Skills and Creativity, 56, Artikel 101728. https://doi.org/10.1016/j.tsc.2024.101728

Sandberg, M., Hattel, J. H. & Spangenberg, J. (2023). Flow‑Induced Fibre Compaction in Resin‑Injection Pultrusion. Transport in Porous Media, 147(3), 541-571. https://doi.org/10.1007/s11242-023-01911-x

Sandberg, M., Hattel, J. H. & Spangenberg, J. (2022). A streamline-integration technique for simulating build-up of process-induced stresses and shape distortions in thermoset pultrusion processes.

Sahli, R., Mikkelsen, J., Boye, M. S., Dias, M. A. & Aghababaei, R. (2024). Frictional Contact of Soft Polymeric Shells. Physical Review Letters, 133(10), Artikel 106202. https://doi.org/10.1103/PhysRevLett.133.106202

Sadik, S. & Dias, M. A. (2021). On local kirigami mechanics I: Isometric conical solutions. Journal of the Mechanics and Physics of Solids, 151, Artikel 104370. https://doi.org/10.1016/j.jmps.2021.104370

Sadik, S., Walker, M. G. & Dias, M. A. (2022). On local kirigami mechanics II: Stretchable creased solutions. Journal of the Mechanics and Physics of Solids, 161, Artikel 104812. https://doi.org/10.1016/j.jmps.2022.104812

Sadik, S. & Yavari, A. (2024). Nonlinear anisotropic viscoelasticity. Journal of the Mechanics and Physics of Solids, 182, Artikel 105461. https://doi.org/10.1016/j.jmps.2023.105461

Sadik, S. & Yavari, A. (2025). A Generalised Coleman-Noll Procedure and the Balance Laws of Hyper-Anelasticity. https://doi.org/10.48550/arXiv.2403.14543

Rysgaard, S., Bjerge, K., Boone, W., Frandsen, E., Graversen, M., Thomas Høye, T., Jensen, B., Johnen, G., Antoni Jackowicz-Korczynski, M., Taylor Kerby, J., Kortegaard, S., Mastepanov, M., Melvad, C., Schmidt Mikkelsen, P., Mortensen, K., Nørgaard, C., Poulsen, E., Riis, T., Sørensen, L. & Røjle Christensen, T. (2022). A mobile observatory powered by sun and wind for near real time measurements of atmospheric, glacial, terrestrial, limnic and coastal oceanic conditions in remote off-grid areas. HardwareX, 12, Artikel e00331. https://doi.org/10.1016/j.ohx.2022.e00331

Rygg Johnsen, A., Petersen, J. E., Pedersen, M. M. & Yildirim, H. C. (2024). Factors affecting the fatigue strength of additively manufactured Ti-6Al-4V parts. Welding in the World, 68(2), 361-409. https://doi.org/10.1007/s40194-023-01604-5

Rincón, M. J. (2018). Supersonic Retropropulsion CFD Analysis of a Reusable Vertical Landing Rocket: Student thesis: Master thesis (including HD thesis). AALBORG UNIVERSITY , PROJECT LIBRARY. https://projekter.aau.dk/projekter/en/studentthesis/supersonic-retropropulsion-cfd-analysis-of-a-reusable-vertical-landing-rocket(12ade5fb-a2e7-4bbf-afe0-395c90f04fc8).html

Rincón, M. J., Reclari, M. & Abkar, M. (2022). Turbulent flow in small-diameter ultrasonic flow meters: A numerical and experimental study. Flow Measurement and Instrumentation, 87, Artikel 102227. https://doi.org/10.1016/j.flowmeasinst.2022.102227

Rincón, M. J., Reclari, M., I. A. Yang, X. & Abkar, M. (2023). Validating the design optimisation of ultrasonic flow meters using computational fluid dynamics and surrogate modelling. International Journal of Heat and Fluid Flow, 100, Artikel 109112. https://doi.org/10.1016/j.ijheatfluidflow.2023.109112

Rincón, M. J. (2024). Robust Optimisation of Ultrasonic Flow Meters by Computational Fluid Dynamics and Enhanced Turbulence Modelling. Aarhus University.

Rincón, M. J., Amarloo, A., Reclari, M., I.A. Yang, X. & Abkar, M. (2023). Progressive augmentation of Reynolds stress tensor models for secondary flow prediction by computational fluid dynamics driven surrogate optimisation. International Journal of Heat and Fluid Flow, 104, Artikel 109242. https://doi.org/10.1016/j.ijheatfluidflow.2023.109242

Rincón, M. J., Reclari, M., Yang, X. & Abkar, M. (2023). CFD-aided morphing and design optimisation of ultrasonic flow meters. I The 14th International ERCOFTAC Symposium on Engineering Turbulence Modelling and Measurements (s. 109-114) https://www.ercoftac.org/etmm/program/conference-program/

Rincón, M. J., Caspersen, A., Thorenfeldt Ingwersen, N., Reclari, M. & Abkar, M. (2024). Flow investigation of two-stand ultrasonic flow meters in a wide dynamic range by numerical and experimental methods. Flow Measurement and Instrumentation, 96, Artikel 102543. https://doi.org/10.1016/j.flowmeasinst.2024.102543

Rao, S., Budzik, M. K. & Dias, M. A. (2022). On microscopic analysis of fracture in unidirectional composite material using phase field modelling. Composites Science and Technology, 220, Artikel 109242. https://doi.org/10.1016/j.compscitech.2021.109242

Ramanujan, D., Bernstein, W. Z., Diaz-Elsayed, N. & R. Haapala, K. (2023). The Role of Industry 4.0 Technologies in Manufacturing Sustainability Assessment. Journal of Manufacturing Science and Engineering, 145(1), Artikel 010801. https://doi.org/10.1115/1.4055661

Rajabi-Abhari, A., Yoo, H., Kim, J.-S., Yoon, H. Y., Park, J. Y., Yan, N., Tabassian, R. & Oh, I.-K. (2024). Reversibly Compressible Silanated Cellulose Nanofibril Aerogel for Triboelectric Taekwondo Scoring Sensors. Small, 20(50), Artikel 2405664. https://doi.org/10.1002/smll.202405664

Rahdan, P., Zeyen, E., Gallego-Castillo, C. & Victoria, M. (2024). Distributed photovoltaics provides key benefits for a highly renewable European energy system. Applied Energy, 360, Artikel 122721. https://doi.org/10.1016/j.apenergy.2024.122721

Rahdan, P., Zeyen, E. & Victoria, M. (2024). Strategic deployment of solar photovoltaics for achieving self-sufficiency in Europe throughout the energy transition. https://arxiv.org/abs/2410.19440

Qian, F., Ding, H., Liu, T., Wu, Z., Zhang, X. & Iqbal, A. (2025). An adaptive active vibration control for flexible beam systems under unknown deterministic disturbances. Mechanical Systems and Signal Processing, 228, Artikel 112447. https://doi.org/10.1016/j.ymssp.2025.112447

Viser resultater 101 til 150 ud af 452

Forrige

Næste

AU Engineering Profile

Download AU Engineering Profile 2013-2022:

Revideret 22.02.2024

Institut for Mekanik og Produktion