Publikationer

Her finder du en samlet liste over de publikationer, som er lavet af medarbejdere ved Institut for Mekanik og Produktion for eksempel tidsskriftsartikler, bøger, rapporter m.v.

Publikationsliste

Sortér efter: Dato | Forfatter | Titel

Manti, S. (2025). Model Discovery via Symbolic Regression with Applications to Fluid Transport Problems. [Ph.d.-afhandling, Aarhus Universitet].

Mansour, R., Enblom, P., Subasic, M., Ireland, A., Gustavsson, F., Forssgren, B. & Efsing, P. (2025). Influence of temperature-dependent viscoplastic relaxation and strain-induced martensitic transformation on the fatigue life of 304L stainless steel. International Journal of Fatigue, 198, Artikel 108992. https://doi.org/10.1016/j.ijfatigue.2025.108992

Malekan, M., Budzik, M. K., Jensen, H. M. & Aghababaei, R. (2021). Fracture analyses of surface asperities during sliding contact. Tribology International, 159, Artikel 106939. https://doi.org/10.1016/j.triboint.2021.106939

Malekan, M., Bloch-Jensen, C. D., Zolbin, M. A., Ørskov, K. B., Jensen, H. M. & Aghababaei, R. (2021). Cutting edge wear in high-speed stainless steel end milling. International Journal of Advanced Manufacturing Technology, 114(9-10), 2911-2928. https://doi.org/10.1007/s00170-021-07006-5

Malekan, M., Khosravi, A. & St-Pierre, L. (2022). An Abaqus plug-in to simulate fatigue crack growth. Engineering with Computers, 38(4), 2991-3005. https://doi.org/10.1007/s00366-021-01321-x

Malekan, M., Ilvig, C. F. & Aghababaei, R. (2024). Effects of Edge Radius and Coating Thickness on the Cutting Performance of AlCrN-Coated Tool. International Journal of Precision Engineering and Manufacturing, 25(10), 2059-2075. https://doi.org/10.1007/s12541-024-01074-9

Malekan, M., Madsen, K. L., Airao, J., Ilvig, C. F. & Aghababaei, R. (2025). Numerical assessment of tool geometry for improving productivity in milling stainless steel 316 L. International Journal of Advanced Manufacturing Technology, 136(7), 3451-3463. Artikel 109782. https://doi.org/10.1007/s00170-025-15061-5

Majidi, S. S., Su, Y., Jørgensen, M. L., Müller, C., Forooghi, P., Nie, G. & Chen, M. (2021). Rayleigh Instability-Driven Coaxial Spinning of Knotted Cell-Laden Alginate Fibers as Artificial Lymph Vessels. ACS applied materials & interfaces, 13(19), 22142-22149. https://doi.org/10.1021/acsami.1c00798

Mahato, M., Hwang, W. J., Tabassian, R., Oh, S., Nguyen, V. H., Nam, S., Kim, J. S., Yoo, H., Taseer, A. K., Lee, M. J., Zhang, H., Song, T. E. & Oh, I. K. (2022). A Dual-Responsive Magnetoactive and Electro–Ionic Soft Actuator Derived from a Nickel-Based Metal–Organic Framework. Advanced Materials, 34(35), Artikel 2203613. https://doi.org/10.1002/adma.202203613

Mahato, M., Garai, M., Nguyen, V. H., Oh, S., Nam, S., Zeng, X., Yoo, H., Tabassian, R. & Oh, I. K. (2023). Polysulfonated covalent organic framework as active electrode host for mobile cation guests in electrochemical soft actuator. Science Advances, 9(50), Artikel eadk9752. https://doi.org/10.1126/sciadv.adk9752

Madsen, N. D., Steffensen, S., Jensen, H. M. & Bøttiger, J. (2015). Toughness measurement of thin films based on circumferential cracks induced at conical indentation. International Journal of Fracture, 193(2), 117-130. https://doi.org/10.1007/s10704-015-0022-5, https://doi.org/10.1007/s10704-015-0022-5

Madary, A., Momeni, H. R., Abate, A. & Larsen, K. G. (2022). Hierarchical Identification of Nonlinear Hybrid Systems in a Bayesian Framework. Information and Computation, 289(Part A), Artikel 104947. https://doi.org/10.1016/j.ic.2022.104947

Ma, L. & Aghababaei, R. (2022). On the Effect of Adhesive Strength and Scratching Depth on Material Transfer During Nanoscale Scratching. Tribology Letters, 70(1), Artikel 26. https://doi.org/10.1007/s11249-021-01558-z

Ma, P., Xia, R., Wang, X., Zhang, X., Królczyk, G., Gardoni, P. & Li, Z. (2022). An active control method for vibration reduction of a single-link flexible manipulator. Journal of Low Frequency Noise Vibration and Active Control, 41(4), 1497-1506. https://doi.org/10.1177/14613484221094982

Ma, L. & Aghababaei, R. (2023). On the Uniqueness of Wear Coefficient for Abrasive Wear at Nanoscale. Journal of Tribology, 145(6), Artikel 062101. https://doi.org/10.1115/1.4062099

Ma, L., Nemati, N., Kim, D. E. & Aghababaei, R. (2024). Interface Amorphization Controls Maximum Wear Resistance of Multinanolayer DLC/WC Coatings. ACS Applied Materials and Interfaces, 16(14), 18090-18098. https://doi.org/10.1021/acsami.3c18218

Ma, G., da Silva, E. R. & Møller, C. (2024). Digital Twin-based Demand-Driven Production Planning and Scheduling System: A New Conceptual Framework. Procedia CIRP, 130, 705-710. https://doi.org/10.1016/j.procir.2024.10.152

Ma, L. (2024). Atomic insights into the abrasive wear mechanisms of mono- and multi-layer coatings at the single asperity level. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus University.

Luo, X., Andriollo, T., Baxevanakis, K. P. & Silberschmidt, V. V. (2025). Microstructural effect on fracture evolution in spheroidal graphite iron: Numerical analysis. Engineering Failure Analysis, 174, Artikel 109459. https://doi.org/10.1016/j.engfailanal.2025.109459

Lund, H., Zinck Thellufsen, J., Vad Mathiesen, B., Thøis Madsen, P., Østergaard, P. A., Nielsen, S., Sorknæs, P., Wenzel, H., Sørensen, P. B., Bruun Andresen, G. & Victoria, M. (2022). 16 energiforskere fra fem universiteter: Lad os få mere fakta i atomkraftdebatten: Der er ikke behov for atomkraft for at sikre stabilitet i elforsyningen. Det vil kun gøre den dyrere og samtidig forsinke den grønne omstilling, skriver en række forskere i et svar til kernefysikere, som har efterlyst mere helstøbt og åben vurdering af atomkraft i Danmark. . Altinget. https://www.altinget.dk/forsyning/artikel/16-energiforskere-fra-fem-universiteter-lad-os-faa-mere-fakta-i-atomkraftdebatten

Lucantonio, A., Nardinocchi, P., Pezzulla, M., Pugliese, V. & Teresi, L. (2013). Modeling Tools for Soft Robotics. Poster-session præsenteret på Soft Robotic Conference, Ascona, Schweiz.

Lubineau, G., Alfano, M., Tao, R., Wagih, A., Yudhanto, A., Li, X., Almuhammadi, K., Hashem, M., Hu, P., Mahmoud, H. A. & Oz, F. (2024). Harnessing Extrinsic Dissipation to Enhance the Toughness of Composites and Composite Joints: A State-of-the-Art Review of Recent Advances. Advanced Materials, 36(51), Artikel 2407132. https://doi.org/10.1002/adma.202407132

Lu, H., Rui, X. & Zhang, X. (2023). Transfer matrix method for linear vibration analysis of flexible multibody systems. Journal of Sound and Vibration, 549, Artikel 117565. https://doi.org/10.1016/j.jsv.2023.117565

L.S. Hedvard, M., Dias, M. A. & Budzik, M. K. (2024). Toughening mechanisms and damage propagation in Architected-Interfaces. International Journal of Solids and Structures, 288, Artikel 112600. https://doi.org/10.1016/j.ijsolstr.2023.112600

L. Jensen, C. S., B. E. Pedersen, R., Mula, B. B., Escalona, J. & Balling, O. (2022). On the Combination of Geometrically Nonlinear Models and Substructuring for Multibody Simulation of Wind Turbine Blades. I 18th International Conference on Multibody Systems, Nonlinear Dynamics, and Control (MSNDC) Artikel DETC2022-90948, V009T09A011 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2022-90948

Linneberg, M. S., Ramanujan, D. & Remy, C. (2020). Implementing bottom-up sustainability innovation in engineering design practice. Afhandling præsenteret på 2nd International Conference on Innovative Applied Energy, Cambridge, Storbritannien.

Li, L., Wang, R. & Zhang, X. (2021). A Tutorial Review on Point Cloud Registrations: Principle, Classification, Comparison, and Technology Challenges. Mathematical Problems in Engineering, 2021, Artikel 9953910. https://doi.org/10.1155/2021/9953910

Li, J., Zhou, X., Brochu, M., Chekir, N., Sixsmith, J. J. & Zhao, Y. F. (2025). Crystal introducing mechanism in laser wire directed energy deposition fabricated Ti6Al4V. Progress in Additive Manufacturing, 10(2), 1231-1241. https://doi.org/10.1007/s40964-024-00701-1

Li, L., Yang, X., Wang, R. & Zhang, X. (2024). Automatic Robot Hand-Eye Calibration Enabled by Learning-Based 3D Vision. Journal of Intelligent and Robotic Systems: Theory and Applications, 110(3), Artikel 130. https://doi.org/10.1007/s10846-024-02166-4

Li, L. & Zhang, X. (2025). A robust assessment method of point cloud quality for enhancing 3D robotic scanning. Robotics and Computer-Integrated Manufacturing, 92, Artikel 102863. https://doi.org/10.1016/j.rcim.2024.102863

Li, W., Wu, S., Zhu, J., Zhang, L., Zheng, J., Wang, H., Qiu, Y., Xie, G. & Li, C. (2025). Constitutive modelling of time-dependent polymer matrix composites: Incorporating a visco-hyperelastic model into the micromechanical framework. Composite Structures, 366, Artikel 119220. https://doi.org/10.1016/j.compstruct.2025.119220

Li, W., Negahban, M., Zhang, W., Zhang, L. & Zhu, J. (2025). Network yield and detangling as a tool for modeling back-stress network softening: A thermodynamically consistent model for polycarbonate. International Journal of Engineering Science, 215, Artikel 104322. https://doi.org/10.1016/j.ijengsci.2025.104322

Li, X., Cheng, Y., Møller, C. & Lee, J. (2025). Data issues in industrial AI systems: A meta-review and research strategy. Computers in Industry, 173, Artikel 104361. https://doi.org/10.1016/j.compind.2025.104361

Li, L., Wan, L., Krueger, V. & Zhang, X. (2025). 3D Hand-Eye Calibration for Collaborative Robot Arm: Look at Robot Base Once. I Proceedings of the 22nd International Conference on Informatics in Control, Automation and Robotics - (Volume 2) (Bind 2, s. 333-341). SCITEPRESS Digital Library. https://doi.org/10.5220/0013738500003982

Li, L. (2025). Active 3D Vision for Robotic Manufacturing Enhancement. [Ph.d.-afhandling, Aarhus Universitet].

Li, X., Cheng, Y. & Møller, C. (2026). Data governance in operations and supply chain: a literature review. Industrial Management and Data Systems, 1-29. Advance online publication. https://doi.org/10.1108/IMDS-05-2025-0650

Lerchl, T., Strack, D., Allaire, B., Yee, E., Scott, R., Nispel, K., Moeller, H., Graf, R., Karupppasamy, S., Kirschke , J. S., Bouxsein, M. L. & Anderson, D. E. (2025). THE EFFECTS OF PREVALENT VERTEBRAL FRACTURES ON SPINAL BIOMECHANICS. Abstract fra 20th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Barcelona, Spanien. https://www.researchgate.net/publication/397941200_THE_EFFECTS_OF_PREVALENT_VERTEBRAL_FRACTURES_ON_SPINAL_BIOMECHANICS

Legaard, C. M., Schranz, T., Schweiger, G., Drgona, J., Falay, B., Gomes, C., Iosifidis, A., Abkar, M. & Larsen, P. G. (2023). Constructing Neural Network Based Models for Simulating Dynamical Systems. ACM Computing Surveys, 55(11), 1-34. Artikel 236. https://doi.org/10.1145/3567591

Lee, S., Yang, J., Forooghi, P., Stroh, A. & Bagheri, S. (2022). Predicting drag on rough surfaces by transfer learning of empirical correlations. Journal of Fluid Mechanics, 933, Artikel A18. https://doi.org/10.1017/jfm.2021.1041

Ledda, P. G., Pezzulla, M., Jambon-Puillet, E., Brun, P. T. & Gallaire, F. (2022). Gravity-driven coatings on curved substrates: a differential geometry approach. Journal of Fluid Mechanics, 949, Artikel A38. https://doi.org/10.1017/jfm.2022.758

Ledda, P. G., Garg, H., Østergaard-Clausen, V., Rudzki, L. K., Madary, A. & Pezzulla, M. (2025). Fluid-induced snap-through instability of spherical shells. Physical Review Letters, 135, Artikel 234002. https://doi.org/10.1103/ltqy-d53p

Lawson, N. J., Migliorini, M., Doll, U., Melnikov, S., Steinbock, J., Dues, M., Zachos, P. K., Röhle, I. & MacManus, D. G. (2026). Pathway to Non-Intrusive In-Flight Flow Diagnostics with Filtered Rayleigh Scattering: SAE International Journal of Aerospace. SAE International Journal of Aerospace, 19(1). https://doi.org/10.4271/01-19-01-0001

Langthjem, M. A. (2022). On the stability of a doubly infinite vortex array. Theoretical and Computational Fluid Dynamics, 36(3), 369-385. https://doi.org/10.1007/s00162-022-00604-3

Langthjem, M. A. & Nakano, M. (2021). On the acoustic trapped modes and their symmetry properties in a circular cylindrical waveguide with a cavity. Journal of Engineering Mathematics, 128(1), Artikel 14. https://doi.org/10.1007/s10665-021-10126-2

Langthjem, M. A. & Nakano, M. (2016). Asymptotic and numerical analysis of resonance and lock-in by flow-acoustic interaction in an expansion chamber-pipe system. Journal of Fluid Science and Technology, 11, Artikel 16-00124 .

Langthjem, M. A. & Nakano, M. (2015). A numerical study of the hole-tone phenomenon subjected to non-axisymmetric shape perturbations of the jet nozzle. Theoretical and Computational Fluid Dynamics, 29, 110-117.

Langthjem, M. A. & Nakano, M. (2013). Application of the time-domain boundary element method to analysis of flow-acoustic interaction in a hole-tone system with a tail pipe. Computer Modeling in Engineering & Sciences, 96(4), 227-241.

Langthjem, M. A. & Sugiyama, Y. (1999). Optimum design of Beck's column with a constraint on the static buckling load. Structural and Multidisciplinary Optimization, 18(4), 228-235.

Langthjem, M. A. (1994). On the influence of damping in a problem of dynamic stability optimization. Structural and Multidisciplinary Optimization, 7(4), 227-236.

Langthjem, M. A. & Nakano, M. (2010). A three-dimensional study of the hole-tone feedback problem. RIMS Kokyuroku, 1697.

Viser resultater 251 til 300 ud af 556

Forrige

Næste

Revideret 22.02.2024

Institut for Mekanik og Produktion