Publikationer

Her finder du en samlet liste over de publikationer, som er lavet af medarbejdere ved Institut for Mekanik og Produktion for eksempel tidsskriftsartikler, bøger, rapporter m.v.

Publikationsliste

Sortér efter: Dato | Forfatter | Titel

I. A. Yang, X., Abkar, M. & I. Park, G. (2024). Grid Convergence Properties of Wall-Modeled Large Eddy Simulations in the Asymptotic Regime. Journal of Fluids Engineering, Transactions of the ASME, 146(8), Artikel 081501. https://doi.org/10.1115/1.4064850

Huulgaard, R. D., Mosgaard, M. A., Bundgaard, A. M., Nors, B., Nielsen, S. & Haase, L. M. (2026). Circular Public Procurement of Textiles – A Roadmap. I CEIC proceedings ( Circular Economy - Interdisciplinary Conference 2026)

Hund, J., Kouznetsova, V. & Andriollo, T. (2025). Efficient prediction of strength and strain localisation in porous solids via microstructure-based limit analysis. Mechanics of Materials, 201, Artikel 105208. https://doi.org/10.1016/j.mechmat.2024.105208

Hund, J., Cuenca, N. & Andriollo, T. (2026). Crack detection by holomorphic neural networks and transfer-learning-enhanced genetic optimization. Engineering Fracture Mechanics, 338, Artikel 112050. https://doi.org/10.1016/j.engfracmech.2026.112050

Hudert, M. M., Elvebakken, M. F., Meagher, M., Mangliar, L., Zhang, X. & Esterle, L. (2022). Deep learning enhanced robotic fabrication of timber-to-timber connections with densified hardwood nails. I Proceedings of the IASS 2022 Symposium affiliated with APCS 2022 conference: Innovation - Sustainability - Legacy (s. 1740-1748)

Hu, P., Dias, M. A. & Budzik, M. K. (2024). Geometric tunability of interlaminar resistance. Composites Part B: Engineering, 287, Artikel 111839. https://doi.org/10.1016/j.compositesb.2024.111839

Hu, P., Li, S. & Budzik, M. K. (2025). Decoupling fracture energy from crack area via surface patterning. Surfaces and Interfaces, 62, Artikel 106066. https://doi.org/10.1016/j.surfin.2025.106066

Hu, P. & Budzik, M. K. (2026). Designed intermittency in interlaminar fracture via kirigami-induced crack-front widening. Composites Science and Technology, 279, Artikel 111611. https://doi.org/10.1016/j.compscitech.2026.111611

Høye, T. T., Dyrmann, M., Kjær, C., Nielsen, J., Bruus, M., Mielec, C. L., Vesterdal, M. S., Bjerge, K., Madsen, S. A., Jeppesen, M. R. & Melvad, C. (2022). Accurate image-based identification of macroinvertebrate specimens using deep learning — How much training data is needed? PeerJ, 10, Artikel e13837. https://doi.org/10.7717/peerj.13837

Hornshøj-Møller, S., Nielsen, P., Forooghi, P. & Abkar, M. (2021). Quantifying structural uncertainties in Reynolds-averaged Navier–Stokes simulations of wind turbine wakes. Renewable Energy, 164, 1550-1558. https://doi.org/10.1016/j.renene.2020.10.148

Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Efficient continuum-based modelling and analysis of polymer SLS: Insights into particle sintering and densification in straight and corner scanning passes. Additive Manufacturing, 109, Artikel 104828. https://doi.org/10.1016/j.addma.2025.104828

Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Particle Flow and Printing Path Effects in SLS. Abstract fra EPF European Polymer Congress, Groningen, Holland.

Hesse, N., Strack, D., Rischewski, J. F., Gassert, F. T., Kufner, A., Urban, T., Lochschmidt, M. E., Schwaiger, B. J., Braun, C., Mueller, D. P., Pfeiffer, D., Baum, T., Subburaj, K., Pfeiffer, F. & Gersing, A. S. (2025). Finite element fracture load analysis and dark-field X-ray imaging of osteoporotic and healthy vertebrae in human lumbar spine specimens. BMC Musculoskeletal Disorders, 26(1), Artikel 545. https://doi.org/10.1186/s12891-025-08709-6

Helal, I. B. I., Du, Y., Wang, H. & Zhang, X. (2024). Dynamic Modelling of a Continuum Robot Arm with Five 3-DoF Segments. I X. Rui & C. Liu (red.), Proceedings of the 2nd International Conference on Mechanical Systems (s. 477-493). Springer. https://doi.org/10.1007/978-981-99-8048-2_30

Hejlskov Hansen, M., Vernica, T., Mansour, R. & Ramanujan, D. (2024). Three-Dimensional Visualization of Energy Consumption Data in Additive Manufacturing. I 44th Computers and Information in Engineering Conference (CIE): 44th Computers and Information in Engineering Conference (CIE) (Bind 2A). Artikel V02AT02A046 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2024-143405

Heide-Jørgensen, S., Ibsen, C. H. & Budzik, M. K. (2021). Temperature dependence of moisture diffusion in woven epoxy-glass composites: A theoretical and experimental study. Materials Today Communications, 29, Artikel 102844. https://doi.org/10.1016/j.mtcomm.2021.102844

Heide-Jørgensen, S., Budzik, M. K. & Ibsen, C. H. (2022). Three-dimensional, multiscale homogenization for hybrid woven composites with fiber-matrix debonding. Composites Science and Technology, 218, Artikel 109204. https://doi.org/10.1016/j.compscitech.2021.109204

He, L., Wang, C., Zhang, M., Li, J., Chen, T. & Zhou, X. (2025). Design of BCC/FCC dual-solid solution refractory high-entropy alloys through CALPHAD, machine learning and experimental methods. npj Computational Materials, 11(1), Artikel 105. https://doi.org/10.1038/s41524-025-01597-3

He, L., Zhang, M., Wang, P., Li, J., Wang, H., Wang, Y., Ye, X., Yan, X., Zhou, S., Liu, S., Zhao, P. & Zhou, X. (2026). Laser melting deposition of dual-phase tungsten-based refractory high-entropy alloys: Face-centered cubic-driven strength and ductility synergy revealed by first-principles calculations. Journal of Materials Science and Technology, 265, 100-111. https://doi.org/10.1016/j.jmst.2025.12.033

Hassan, H., Chatterjee, A., Bushagour, A. & Layton, A. (2025). POTENTIAL FOR DIGITAL TECHNOLOGIES AND ADDITIVE MANUFACTURING TO SUPPORT LEAN MANUFACTURING AND CIRCULAR ECONOMY SYNERGIES. I International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: Volume 2A: 45th Computers and Information in Engineering Conference (CIE) Artikel v02at02a040 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2025-169490

Hashmi, M. F., Ashish, B. K. K., Sharma, V., Keskar, A. G., Bokde, N., Yoon, J. H. & Geem, Z. W. (2021). LARNet: Real-Time Detection of Facial Micro Expression Using Lossless Attention Residual Network. Sensors, 21(4), Artikel 1098. https://doi.org/10.3390/s21041098

Hansen, C., I. A. Yang, X. & Abkar, M. (2022). Data-Driven Dynamical System Models of Roughness-Induced Secondary Flows in Thermally Stratified Boundary Layers. I Proceedings of the ASME 2022 Fluids Engineering Division Summer Meeting : Volume 2: Multiphase Flow (MFTC); Computational Fluid Dynamics (CFDTC); Micro and Nano Fluid Dynamics (MNFDTC) Artikel FEDSM2022-87630, V002T05A023 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/FEDSM2022-87630

Hansen, C., I. A. Yang, X. & Abkar, M. (2023). Data-Driven Dynamical System Models of Roughness-Induced Secondary Flows in Thermally Stratified Turbulent Boundary Layers. Journal of Fluids Engineering, Transactions of the ASME, 145(6), Artikel FE-22-1510. https://doi.org/10.1115/1.4057016

Hansen, C., I.A. Yang, X. & Abkar, M. (2023). A POD-mode-augmented wall model and its applications to flows at non-equilibrium conditions. Journal of Fluid Mechanics, 975, Artikel A24. https://doi.org/10.1017/jfm.2023.857

Hansen, C., Sørensen, J. N., I. A. Yang, X. & Abkar, M. (2024). Extension of the law of the wall exploiting weak similarity of velocity fluctuations in turbulent channels. Physics of Fluids, 36(1), Artikel 015134. https://doi.org/10.1063/5.0185334

Hansen, J. G. & de Figueiredo, R. P. (2024). Active Object Detection and Tracking Using Gimbal Mechanisms for Autonomous Drone Applications. Drones, 8(2), Artikel 55. https://doi.org/10.3390/drones8020055

Hansen, C., Yang, X. I. A. & Abkar, M. (2026). Wall-modeled large-eddy simulation of turbulent smooth body separation using the OpenFOAM flow solver. Journal of Fluids Engineering, Transactions of the ASME, 148(1), Artikel 011502. https://doi.org/10.1115/1.4068997

Hansen, C. (2025). Modern Perspectives on Wall-Bounded Turbulence Modeling: Merging Physics-based and Data-Driven Approaches. [Ph.d.-afhandling, Aarhus Universitet].

Haegel, N. M., Verlinden, P., Victoria, M., Altermatt, P., Atwater, H., Barnes, T., Breyer, C., Case, C., De Wolf, S., Deline, C., Dharmrin, M., Dimmler, B., Gloeckler, M., Goldschmidt, J. C., Hallam, B., Haussener, S., Holder, B., Jaeger, U., Jaeger-Waldau, A. ... W. Bett, A. (2023). Photovoltaics at multi-terawatt scale: Waiting is not an option: 25% annual PV growth is possible over the next decade. Science, 380(6640), 39-42. https://doi.org/10.1126/science.adf6957

Haase, L. M., Nielsen, S., Nors, B. & Bakker, C. (2026). Sorting out the Messiness of Green, Circular, and Sufficiency Approaches for Sustainability within Design. Manuskript afsendt til publicering.

Gøtske, E. K. & Victoria, M. (2021). Future operation of hydropower in Europe under high renewable penetration and climate change. iScience, 24(9), Artikel 102999. https://doi.org/10.1016/j.isci.2021.102999

Gøtske, E. K., Bruun Andresen, G. & Victoria, M. (2023). Cost and Efficiency Requirements for Successful Electricity Storage in a Highly Renewable European Energy System. PRX Energy, 2(2), Artikel 023006. https://doi.org/10.1103/PRXEnergy.2.023006

Gøtske, E. K., Andresen, G. B., Neumann, F. & Victoria, M. (2024). Designing a sector-coupled European energy system robust to 60 years of historical weather data. Nature Communications, 15(1), Artikel 10680. https://doi.org/10.1038/s41467-024-54853-3

Gøtske, E. K. (2024). Energy storage and climate impacts on the future renewable European energy system. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus Universitet.

Gøtske, E. K., Pratama, Y., Andresen, G. B., Gidden, M. J., Victoria, M. & Zakeri, B. (2025). First steps towards bridging integrated assessment modeling and high-resolution energy system models: a scenario matrix for a low-emissions sector-coupled European energy system. Environmental Research Communications, 7(8), Artikel 085010. https://doi.org/10.1088/2515-7620/adf60d

Glisic, M., Veluri, B. & Ramanujan, D. (2021). A Reusable Unit Process Life Cycle Inventory Model for Infeed Centerless Grinding. I 26th Design for Manufacturing and the Life Cycle Conference (DFMLC): 26th Design for Manufacturing and the Life Cycle Conference (DFMLC) (Bind 5). Artikel DETC2021-69609, V005T05A025 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2021-69609

Glisic, M., Sarfraz, S., Veluri, B. & Ramanujan, D. (2022). A Systematic Framework for Quantifying Production System-Specific Challenges in Life Cycle Inventory Data Collection. Procedia CIRP, 105, 210-218. https://doi.org/10.1016/j.procir.2022.02.035

Glisic, M., Veluri, B. & Ramanujan, D. (2024). A Bottom-Up Methodology for Identifying Key Performance Indicators for Sustainability Monitoring of Unit Manufacturing Processes. Sustainability, 16(2), Artikel 806. https://doi.org/10.3390/su16020806

Glisic, M., Møller, C., Veluri, B. & Ramanujan, D. (2024). Digital Process Passport: A Conceptual Model for Information Collection and Sharing In Sustainable Manufacturing. Procedia CIRP, 130(27), 1077-1083. https://doi.org/10.1016/j.procir.2024.10.209

Glisic, M. (2023). Guiding production planning to improve manufacturing process inventory data collection and modelling. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus Universitet.

Giauque, A., Giguet, C., Vadrot, A. & Corre, C. (2024). A priori test of Large-Eddy Simulation models for the Sub-Grid Scale turbulent stress tensor in perfect and transcritical compressible real gas Homogeneous Isotropic Turbulence. Computers and Fluids, 268, Artikel 106091. https://doi.org/10.1016/j.compfluid.2023.106091

Ghoul, A., Djeffal, S., Wang, H., Kara, K. & Hadjili, M. L. (2025). Enhancing Surgical Robotics: A Dynamic Model and Optimized Control Strategy for Cable-Driven Continuum Robots. Journal of Mechanisms and Robotics, 17(2), Artikel 021002. https://doi.org/10.1115/1.4065698

Ghasemi, A., Sadough Vanini, S. A., Alizadeh Zolbin, M. & Aghababaei, R. (2024). Exploring the influence of ultrasonic peening treatment at ambient and cryogenic conditions on the surface characteristics and fatigue life of austenitic stainless steel 304L. Surface and Coatings Technology, 494(Part 1 ), Artikel 131382. https://doi.org/10.1016/j.surfcoat.2024.131382

Geckeler, C., Kirchgeorg, S., Strunk, G., Thostrup, F. B., Sangermano, F., Desiderato, A., Lüthi, M., Jucker, M., Gonzalez Herrera, M. A., Franco-Sierra, N. D., Pulido-Santacruz, P., Marc Chang, J. J., Aden Ip, Y. C., Mächler, E., Svenning, A., Mougeot, G., Høye, T. T., Fopp, F., Pellissier, L. ... Mintchev, S. (2025). Field Deployment of BiodivX Drones in the Amazon Rainforest for Biodiversity Monitoring. IEEE Transactions on Field Robotics, 2, 336-352. https://doi.org/10.1109/TFR.2025.3574945

Gautam, K. R., Bruun Andresen, G. & Victoria, M. (2022). Review and Techno-Economic Analysis of Emerging Thermo-Mechanical Energy Storage Technologies. Energies, 15(17), Artikel 6328. https://doi.org/10.3390/en15176328

Garg, H., Ledda, P. G., Skov Pedersen, J. & Pezzulla, M. (2024). Passive Viscous Flow Selection via Fluid-Induced Buckling. Physical Review Letters, 133(8), Artikel 084001. https://doi.org/10.1103/PhysRevLett.133.084001

Gao, X., Zhang, Y., Haahr-Lillevang, L., Vedel-Smith, N. K. & Andriollo, T. (2023). 3D strain pattern in additively manufactured AlSi10Mg from digital volume correlation. Heliyon, 9(12), Artikel e23186. https://doi.org/10.1016/j.heliyon.2023.e23186

Gallego-Castillo, C. & Victoria, M. (2025). PyPSA-Spain: An extension of PyPSA-Eur to model the Spanish energy system. Energy Strategy Reviews, 60, Artikel 101764. https://doi.org/10.1016/j.esr.2025.101764

Gad Kjeld, J., Avendaño-Valencia, L. D., Brandt, A., Christensen, S. S. & Karottki Falk Andersen, J. (2023). Towards minimal empirical uncertainty bounds of damping estimates of an offshore wind turbine in idling conditions. Mechanical Systems and Signal Processing, 191, Artikel 110180. https://doi.org/10.1016/j.ymssp.2023.110180

Fulco, S., Budzik, M. K., Xiao, H., Durian, D. J. & Turner, K. T. (2025). Disorder enhances the fracture toughness of 2D mechanical metamaterials. PNAS Nexus, 4(2), Artikel pgaf023. https://doi.org/10.1093/pnasnexus/pgaf023

Viser resultater 351 til 400 ud af 577

Forrige

Næste

Revideret 22.02.2024

Institut for Mekanik og Produktion