Publikationer

Her finder du en samlet liste over de publikationer, som er lavet af medarbejdere ved Institut for Mekanik og Produktion for eksempel tidsskriftsartikler, bøger, rapporter m.v.

Publikationsliste

Sortér efter: Dato | Forfatter | Titel

Neumann, F., Zeyen, E., Victoria, M. & Brown, T. (2023). The potential role of a hydrogen network in Europe. Joule, 7(8), 1793-1817. https://doi.org/10.1016/j.joule.2023.06.016

Nemati, N., Manhard, A., Greuner, H., Hunger, K., Böswirth, B., Visca, E. & You, J. H. (2023). Microstructural evolution of tungsten under thermal loads: A comparative study between cyclic high heat flux loading and isochronous furnace heating. Nuclear Materials and Energy, 36, Artikel 101465. https://doi.org/10.1016/j.nme.2023.101465

Nazari, R., Aghababaei, R., Papangelo, A. & Ciavarella, M. (2025). Adhesion- and friction-induced suppression of buckling in thin spherical shells in contact with a rigid wall. International Journal of Engineering Science, 215, Artikel 104329. https://doi.org/10.1016/j.ijengsci.2025.104329

Nasr Saleh, M., Budzik, M. K., Saeedifar, M., Zarouchas, D. & Teixeira de Freitas, S. (2022). On the influence of the adhesive and the adherend ductility on mode I fracture characterization of thick adhesively-bonded joints. International Journal of Adhesion and Adhesives, 115, Artikel 103123. https://doi.org/10.1016/j.ijadhadh.2022.103123

Nafisi, S. (2024). Experimental Study on the Mechanical and Light-Filtering Properties of Functionally Graded Bio-Composites. I Designing with Bio-based Materials: Approaches, Methods and Tools (1 udg.). Springer Nature.

Mula, B. B., Escalona, J., Lambert, R., Ling, R. & Balling, O. (2023). On the definition and effect of optimum gear microgeometry modifications for the gearbox of an offshore 10-MW wind turbine. Wind Energy, 26(7), 717-740. https://doi.org/10.1002/we.2825

Movassagh-Alanagh, F., Abdollah-zadeh, A., Alizadeh Zolbin, M., Nemati, N. & Aghababaei, R. (2023). Plasma-enhanced chemical vapor deposition of TiB₂ and TiBN hard coatings using BBr₃. Tribology International, 179, Artikel 108137. https://doi.org/10.1016/j.triboint.2022.108137

Movassagh-Alanagh, F., Abdollah-Zadeh, A. & Aghababaei, R. (2025). Effects of B and C elements on microstructure, mechanical and tribological properties of TiN coating deposited by PACVD. Materials Characterization, 225, Artikel 115178. https://doi.org/10.1016/j.matchar.2025.115178

Moon, J., Mahravan, E. & Kim, D. (2024). Mutual interaction of a collapsing bubble and a nearby viscoelastic solid. Physical Review Fluids, 9(4), Artikel 043603. https://doi.org/10.1103/PhysRevFluids.9.043603

Moon, J., Jang, C., Mahravan, E. & Kim, D. (2025). Cavitation bubble-induced hydrodynamic loading and interfacial deformation in an air pocket. Journal of Fluid Mechanics, 1016, Artikel A39. https://doi.org/10.1017/jfm.2025.10398

Mitra, T., singh, G., Darki, A. A., Madsen, S. P. & Dantan, A. R. (2024). Narrow-linewidth Fano microcavities with resonant subwavelength grating mirror. Optics Express, 32(9), 15667-15679. https://doi.org/10.1364/OE.521329

Mirzaiee, R., Vernica, T., Scheuringer, K. & Bernstein, W. Z. (2022). Towards Retargetable Animations for Industrial Augmented Reality. I Proceedings - 2022 IEEE Conference on Virtual Reality and 3D User Interfaces Abstracts and Workshops, VRW 2022 (s. 872-873). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/VRW55335.2022.00287

Mikropoulos, E., Roelfsema, M., Chen, H. H., Staffell, I., Oreggioni, G., Hdidouan, D., Thellufsen, J. Z., Chang, M. A., Fragkos, P., Giannousakis, A., Chatterjee, S., Ürge-Vorsatz, D., Pfenninger, S., Pickering, B., Victoria, M., Brown, T. & van Vuuren, D. P. (2025). Examining pathways for a climate neutral Europe by 2050: A model comparison analysis including integrated assessment models and energy system models. Energy, 319, Artikel 134809. https://doi.org/10.1016/j.energy.2025.134809

Migliorini, M., Zachos, P. K., Macmanus, D. G., Doll, U., Dues, M., Steinbock, J., Dues, F., Siswanto, A., Melnikov, S. M. & Röhle, I. (2024). Seeding-free inlet flow distortion measurements using filtered Rayleigh scattering: integration in a complex intake test facility. Afhandling præsenteret på AIAA SciTech Forum and Exposition, 2024, Orlando, USA. https://doi.org/10.2514/6.2024-2831

Migliorini, M., Doll, U., Lawson, N. J., Melnikov, S. M., Steinbock, J., Dues, M., Zachos, P. K., Röhle, I. & MacManus, D. G. (2025). Advancements on the use of Filtered Rayleigh Scattering (FRS) with Machine learning methods for flow distortion in Aero-Engine intakes. Experimental Thermal and Fluid Science, 160, 111325. Artikel 111325. https://doi.org/10.1016/j.expthermflusci.2024.111325

Matsuura, K., Mukai, K. & Langthjem, M. A. (2021). Computational and experimental study on ring tone. I S. Hernández & A. Coruña (red.), Advances in Fluid Dynamics with emphasis on Multiphase and Complex Flow (s. 141-151). WIT Press.

Matsuura, K., Mukai, K. & Langthjem, M. A. (2023). Computational and Experimental Study on the Mechanism of Ring Tone. International Journal of Computational Methods and Experimental Measurements, 11(1), 9-16. https://doi.org/10.18280/ijcmem.110102

Manti, S. & Lucantonio, A. (2024). Discovering interpretable physical models using symbolic regression and discrete exterior calculus. Machine Learning: Science and Technology, 5(1), Artikel 015005. https://doi.org/10.1088/2632-2153/ad1af2

Manti, S., Tsai, P.-H., Lucantonio, A. & Iliescu, T. (2025). Symbolic regression of data-driven reduced order model closures for under-resolved, convection-dominated flows. Journal of Computational Physics, 540, Artikel 114298. https://doi.org/10.1016/j.jcp.2025.114298

Mansour, R., Enblom, P., Subasic, M., Ireland, A., Gustavsson, F., Forssgren, B. & Efsing, P. (2025). Influence of temperature-dependent viscoplastic relaxation and strain-induced martensitic transformation on the fatigue life of 304L stainless steel. International Journal of Fatigue, 198, Artikel 108992. https://doi.org/10.1016/j.ijfatigue.2025.108992

Malekan, M., Budzik, M. K., Jensen, H. M. & Aghababaei, R. (2021). Fracture analyses of surface asperities during sliding contact. Tribology International, 159, Artikel 106939. https://doi.org/10.1016/j.triboint.2021.106939

Malekan, M., Bloch-Jensen, C. D., Zolbin, M. A., Ørskov, K. B., Jensen, H. M. & Aghababaei, R. (2021). Cutting edge wear in high-speed stainless steel end milling. International Journal of Advanced Manufacturing Technology, 114(9-10), 2911-2928. https://doi.org/10.1007/s00170-021-07006-5

Malekan, M., Khosravi, A. & St-Pierre, L. (2022). An Abaqus plug-in to simulate fatigue crack growth. Engineering with Computers, 38(4), 2991-3005. https://doi.org/10.1007/s00366-021-01321-x

Malekan, M., Ilvig, C. F. & Aghababaei, R. (2024). Effects of Edge Radius and Coating Thickness on the Cutting Performance of AlCrN-Coated Tool. International Journal of Precision Engineering and Manufacturing, 25(10), 2059-2075. https://doi.org/10.1007/s12541-024-01074-9

Malekan, M., Madsen, K. L., Airao, J., Ilvig, C. F. & Aghababaei, R. (2025). Numerical assessment of tool geometry for improving productivity in milling stainless steel 316 L. International Journal of Advanced Manufacturing Technology, 136(7), 3451-3463. Artikel 109782. https://doi.org/10.1007/s00170-025-15061-5

Majidi, S. S., Su, Y., Jørgensen, M. L., Müller, C., Forooghi, P., Nie, G. & Chen, M. (2021). Rayleigh Instability-Driven Coaxial Spinning of Knotted Cell-Laden Alginate Fibers as Artificial Lymph Vessels. ACS applied materials & interfaces, 13(19), 22142-22149. https://doi.org/10.1021/acsami.1c00798

Mahato, M., Hwang, W. J., Tabassian, R., Oh, S., Nguyen, V. H., Nam, S., Kim, J. S., Yoo, H., Taseer, A. K., Lee, M. J., Zhang, H., Song, T. E. & Oh, I. K. (2022). A Dual-Responsive Magnetoactive and Electro–Ionic Soft Actuator Derived from a Nickel-Based Metal–Organic Framework. Advanced Materials, 34(35), Artikel 2203613. https://doi.org/10.1002/adma.202203613

Mahato, M., Garai, M., Nguyen, V. H., Oh, S., Nam, S., Zeng, X., Yoo, H., Tabassian, R. & Oh, I. K. (2023). Polysulfonated covalent organic framework as active electrode host for mobile cation guests in electrochemical soft actuator. Science Advances, 9(50), Artikel eadk9752. https://doi.org/10.1126/sciadv.adk9752

Madsen, N. D., Steffensen, S., Jensen, H. M. & Bøttiger, J. (2015). Toughness measurement of thin films based on circumferential cracks induced at conical indentation. International Journal of Fracture, 193(2), 117-130. https://doi.org/10.1007/s10704-015-0022-5, https://doi.org/10.1007/s10704-015-0022-5

Madary, A., Momeni, H. R., Abate, A. & Larsen, K. G. (2022). Hierarchical Identification of Nonlinear Hybrid Systems in a Bayesian Framework. Information and Computation, 289(Part A), Artikel 104947. https://doi.org/10.1016/j.ic.2022.104947

Ma, L. & Aghababaei, R. (2022). On the Effect of Adhesive Strength and Scratching Depth on Material Transfer During Nanoscale Scratching. Tribology Letters, 70(1), Artikel 26. https://doi.org/10.1007/s11249-021-01558-z

Ma, P., Xia, R., Wang, X., Zhang, X., Królczyk, G., Gardoni, P. & Li, Z. (2022). An active control method for vibration reduction of a single-link flexible manipulator. Journal of Low Frequency Noise Vibration and Active Control, 41(4), 1497-1506. https://doi.org/10.1177/14613484221094982

Ma, L. & Aghababaei, R. (2023). On the Uniqueness of Wear Coefficient for Abrasive Wear at Nanoscale. Journal of Tribology, 145(6), Artikel 062101. https://doi.org/10.1115/1.4062099

Ma, L., Nemati, N., Kim, D. E. & Aghababaei, R. (2024). Interface Amorphization Controls Maximum Wear Resistance of Multinanolayer DLC/WC Coatings. ACS Applied Materials and Interfaces, 16(14), 18090-18098. https://doi.org/10.1021/acsami.3c18218

Ma, G., da Silva, E. R. & Møller, C. (2024). Digital Twin-based Demand-Driven Production Planning and Scheduling System: A New Conceptual Framework. Procedia CIRP, 130, 705-710. https://doi.org/10.1016/j.procir.2024.10.152

Ma, L. (2024). Atomic insights into the abrasive wear mechanisms of mono- and multi-layer coatings at the single asperity level. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus University.

Luo, X., Andriollo, T., Baxevanakis, K. P. & Silberschmidt, V. V. (2025). Microstructural effect on fracture evolution in spheroidal graphite iron: Numerical analysis. Engineering Failure Analysis, 174, Artikel 109459. https://doi.org/10.1016/j.engfailanal.2025.109459

Lund, H., Zinck Thellufsen, J., Vad Mathiesen, B., Thøis Madsen, P., Østergaard, P. A., Nielsen, S., Sorknæs, P., Wenzel, H., Sørensen, P. B., Bruun Andresen, G. & Victoria, M. (2022). 16 energiforskere fra fem universiteter: Lad os få mere fakta i atomkraftdebatten: Der er ikke behov for atomkraft for at sikre stabilitet i elforsyningen. Det vil kun gøre den dyrere og samtidig forsinke den grønne omstilling, skriver en række forskere i et svar til kernefysikere, som har efterlyst mere helstøbt og åben vurdering af atomkraft i Danmark. . Altinget. https://www.altinget.dk/forsyning/artikel/16-energiforskere-fra-fem-universiteter-lad-os-faa-mere-fakta-i-atomkraftdebatten

Lucantonio, A., Nardinocchi, P., Pezzulla, M., Pugliese, V. & Teresi, L. (2013). Modeling Tools for Soft Robotics. Poster-session præsenteret på Soft Robotic Conference, Ascona, Schweiz.

Lubineau, G., Alfano, M., Tao, R., Wagih, A., Yudhanto, A., Li, X., Almuhammadi, K., Hashem, M., Hu, P., Mahmoud, H. A. & Oz, F. (2024). Harnessing Extrinsic Dissipation to Enhance the Toughness of Composites and Composite Joints: A State-of-the-Art Review of Recent Advances. Advanced Materials, 36(51), Artikel 2407132. https://doi.org/10.1002/adma.202407132

Lu, H., Rui, X. & Zhang, X. (2023). Transfer matrix method for linear vibration analysis of flexible multibody systems. Journal of Sound and Vibration, 549, Artikel 117565. https://doi.org/10.1016/j.jsv.2023.117565

L.S. Hedvard, M., Dias, M. A. & Budzik, M. K. (2024). Toughening mechanisms and damage propagation in Architected-Interfaces. International Journal of Solids and Structures, 288, Artikel 112600. https://doi.org/10.1016/j.ijsolstr.2023.112600

L. Jensen, C. S., B. E. Pedersen, R., Mula, B. B., Escalona, J. & Balling, O. (2022). On the Combination of Geometrically Nonlinear Models and Substructuring for Multibody Simulation of Wind Turbine Blades. I 18th International Conference on Multibody Systems, Nonlinear Dynamics, and Control (MSNDC) Artikel DETC2022-90948, V009T09A011 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2022-90948

Linneberg, M. S., Ramanujan, D. & Remy, C. (2020). Implementing bottom-up sustainability innovation in engineering design practice. Afhandling præsenteret på 2nd International Conference on Innovative Applied Energy, Cambridge, Storbritannien.

Li, L., Wang, R. & Zhang, X. (2021). A Tutorial Review on Point Cloud Registrations: Principle, Classification, Comparison, and Technology Challenges. Mathematical Problems in Engineering, 2021, Artikel 9953910. https://doi.org/10.1155/2021/9953910

Li, J., Zhou, X., Brochu, M., Chekir, N., Sixsmith, J. J. & Zhao, Y. F. (2025). Crystal introducing mechanism in laser wire directed energy deposition fabricated Ti6Al4V. Progress in Additive Manufacturing, 10(2), 1231-1241. https://doi.org/10.1007/s40964-024-00701-1

Li, L., Yang, X., Wang, R. & Zhang, X. (2024). Automatic Robot Hand-Eye Calibration Enabled by Learning-Based 3D Vision. Journal of Intelligent and Robotic Systems: Theory and Applications, 110(3), Artikel 130. https://doi.org/10.1007/s10846-024-02166-4

Li, L. & Zhang, X. (2025). A robust assessment method of point cloud quality for enhancing 3D robotic scanning. Robotics and Computer-Integrated Manufacturing, 92, Artikel 102863. https://doi.org/10.1016/j.rcim.2024.102863

Li, W., Wu, S., Zhu, J., Zhang, L., Zheng, J., Wang, H., Qiu, Y., Xie, G. & Li, C. (2025). Constitutive modelling of time-dependent polymer matrix composites: Incorporating a visco-hyperelastic model into the micromechanical framework. Composite Structures, 366, Artikel 119220. https://doi.org/10.1016/j.compstruct.2025.119220

Li, L. (2025). Active 3D Vision for Robotic Manufacturing Enhancement.

Viser resultater 201 til 250 ud af 498

Forrige

Næste

Revideret 22.02.2024

Institut for Mekanik og Produktion