Publikationer

Her finder du en samlet liste over de publikationer, som er lavet af medarbejdere ved Institut for Mekanik og Produktion for eksempel tidsskriftsartikler, bøger, rapporter m.v.

Publikationsliste

Sortér efter: Dato | Forfatter | Titel

Zhang, B., Endelt, B. & Nielsen, K. B. (2023). Characterization of mechanical properties for tubular materials based on hydraulic bulge test under axial feeding force. Fundamental Research, 3(4), 592-601. https://doi.org/10.1016/j.fmre.2022.01.024

Ulriksen, M. D., Jepsen, M. & Bernal, D. (2023). Closed-loop load vectors for structural damage localization. Mechanical Systems and Signal Processing, 196, Artikel 110321. https://doi.org/10.1016/j.ymssp.2023.110321

Yang, X., Zhou, Z., Li, L. & Zhang, X. (2023). Collaborative robot dynamics with physical human–robot interaction and parameter identification with PINN. Mechanism and Machine Theory, 189, Artikel 105439. https://doi.org/10.1016/j.mechmachtheory.2023.105439

Carlson, D. F., Akbulut, S., Rasmussen, J. F., Hestbech, C. S., Andersen, M. H. & Melvad, C. (2023). Compact and modular autonomous surface vehicle for water research: The Naval Operating Research Drone Assessing Climate Change (NORDACC). HardwareX, 15, Artikel e00453. https://doi.org/10.1016/j.ohx.2023.e00453

Niazi, K. A. K. & Victoria, M. (2023). Comparative analysis of photovoltaic configurations for agrivoltaic systems in Europe. Progress in Photovoltaics, 31(11), 1101-1113. https://doi.org/10.1002/pip.3727

Ferguson, O. V., Skovsgaard, S. P. H., Jensen, H. M. & Mikkelsen, L. P. (2023). Compressive strength prediction of carbon fiber-reinforced pultruded profiles including realistic volumetric fiber orientations. European Journal of Mechanics A - Solids, 104( Supplement), Artikel 105011. https://doi.org/10.1016/j.euromechsol.2023.105011

Matsuura, K., Mukai, K. & Langthjem, M. A. (2023). Computational and Experimental Study on the Mechanism of Ring Tone. International Journal of Computational Methods and Experimental Measurements, 11(1), 9-16. https://doi.org/10.18280/ijcmem.110102

Legaard, C. M., Schranz, T., Schweiger, G., Drgona, J., Falay, B., Gomes, C., Iosifidis, A., Abkar, M. & Larsen, P. G. (2023). Constructing Neural Network Based Models for Simulating Dynamical Systems. ACM Computing Surveys, 55(11), 1-34. Artikel 236. https://doi.org/10.1145/3567591

Gøtske, E. K., Bruun Andresen, G. & Victoria, M. (2023). Cost and Efficiency Requirements for Successful Electricity Storage in a Highly Renewable European Energy System. PRX Energy, 2(2), Artikel 023006. https://doi.org/10.1103/PRXEnergy.2.023006

Hansen, C., I. A. Yang, X. & Abkar, M. (2023). Data-Driven Dynamical System Models of Roughness-Induced Secondary Flows in Thermally Stratified Turbulent Boundary Layers. Journal of Fluids Engineering, Transactions of the ASME, 145(6), Artikel FE-22-1510. https://doi.org/10.1115/1.4057016

Amarloo, A., Cinnella, P., Iosifidis, A., Forooghi, P. & Abkar, M. (2023). Data-driven Reynolds stress models based on the frozen treatment of Reynolds stress tensor and Reynolds force vector. Physics of Fluids, 35(7), Artikel 075154. https://doi.org/10.1063/5.0160977

Pedersen, T. T. (2023). Decision support for renewable energy integration through exploration of near-optimal solutions. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus Universitet.

Formentini, G. & Ramanujan, D. (2023). Design for circular disassembly: Evaluating the impacts of product end-of-life status on circularity through the parent-action-child model. Journal of Cleaner Production, 405, Artikel 137009. https://doi.org/10.1016/j.jclepro.2023.137009

Budzik, M. K., Dias, M. A. & Hoffmann, U. S. (2023). Design of failure loads and crack growth by width varying interfaces. 142. Abstract fra International Conference on Adhesive Bonding 2023, Porto, Portugal.

Farhadiyadkuri, F. (2023). Development of Robotic Brace for AIS Treatment. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus Universitet.

Addo-Tenkorang, R., Møller, C. & Chen, K.-L. (2023). Digital Transformation Roadmap for Danish SME Smart Factories: Benefits and Future Research. I International Conference on Smart Business Technologies (s. 41-60)

Srinivasan, V., Song, B., Luo, J., Karupppasamy, S., Elara Mohan, R., Blessing, L. & Wood, K. (2023). Do Analogies and Analogical Distance Influence Ideation Outcomes in Engineering Design? I S. Mukherjee, V. Dutt & N. Srinivasan (red.), Applied Cognitive Science and Technology: Implications of Interactions Between Human Cognition and Technology (s. 211–230). Springer. https://doi.org/10.1007/978-981-99-3966-4_13

Bruun Andresen, G. (2023). Dunkelflaute: Der, hvor solen ikke skinner. - KlimaFokus. Billeder, Video- og Lydoptagelser (digital), Klimakysset. https://www.klimakysset.dk/klimafokus-stil-skarpt-paa-klimaet/groen-energi-fysik/

Dahl, M. B., Ulriksen, M. D. & Nielsen, M. E. (2023). Eigenvector assignment for damage localization with invariant eigenvalues. I 10th ECCOMAS Thematic Conference on Smart Structures and Materials. Eccomas Proceedia. https://doi.org/10.7712/150123.9861.450498

Zeyen, E., Victoria, M. & Brown, T. (2023). Endogenous learning for green hydrogen in a sector-coupled energy model for Europe. Nature Communications, 14(1), Artikel 3743. https://doi.org/10.1038/s41467-023-39397-2

Abu Shaid Sujon, M., Andriollo, T. & Islam, A. (2023). Enhancing vibration damping properties of MABS/VDT blends using SEBS‑g‑MAH as a compatibilizer. Journal of Polymer Research, 30(12), Artikel 440. https://doi.org/10.1007/s10965-023-03819-y

Norouzikudiani, R., Lucantonio, A. & DeSimone, A. (2023). Equilibrium and transient response of photo-actuated Liquid Crystal Elastomer beams. Mechanics Research Communications, 131, Artikel 104126. https://doi.org/10.1016/j.mechrescom.2023.104126

Bruun Andresen, G. (2023). Er solceller Danmarks fremtid?. Billeder, Video- og Lydoptagelser (digital), YouTube. https://www.youtube.com/watch?v=9XCDwV-rYQA

Formentini, G. & Ramanujan, D. (2023). EXAMINING THE ROLE AND FUTURE POTENTIAL OF DESIGN FOR DISASSEMBLY METHODS TO SUPPORT CIRCULAR PRODUCT DESIGN. Proceedings of the Design Society , 3, 1735 - 1744. https://doi.org/10.1017/pds.2023.174

Eheliyagoda, D., Veluri, B., Ramanujan, D. & Liu, G. (2023). Examining three decades of global dysprosium supply chain through a material flow analysis. I First IRTC conference: Raw materials for a sustainable future (s. 20)

Jensen, J. S. K. & Aghababaei, R. (2023). Experimental investigation of three-body wear for rubber seals in abrasive slurry environment. Wear, 534-535, Artikel 205131. https://doi.org/10.1016/j.wear.2023.205131

Budzik, M. K., Dias, M. A., Hedvard, M. & Athanasiadis, A. (2023). Failure of architected interfaces. 47. Abstract fra International Conference on Adhesive Bonding 2023, Porto, Portugal.

Zinck Thellufsen, J., Lund, H., Vad Mathiesen, B., Thøis Madsen, P., Østergaard, P. A., Nielsen, S., Sorknæs, P., Wenzel, H., Østergaard, J., Münster, M., Berg Rosendal, M., Madsen, H., Morthorst, P. E., Sørensen, P. B., Bruun Andresen, G., Gøtske, E. K., Pedersen, T. T. & Victoria, M. (2023). Fakta om Atomkraft i Danmark - Version 2: Input til en faktabaseret diskussion af fordele og ulemper ved atomkraft som en del af den grønne omstilling i Danmark. https://vbn.aau.dk/ws/portalfiles/portal/534311584/Fakta_om_atomkraft_V2_FINAL.pdf

Vero, K., Islam, R. & Borah, J. P. (2023). First-principles study on the enhancement of structure stability and magnetocrystalline anisotropy energy of L1₀-ordered Mn_1−xFe_xAlC compound for permanent magnet application. Journal of Applied Physics, 134(15), Artikel 153902. https://doi.org/10.1063/5.0172356

Sandberg, M., Hattel, J. H. & Spangenberg, J. (2023). Flow‑Induced Fibre Compaction in Resin‑Injection Pultrusion. Transport in Porous Media, 147(3), 541-571. https://doi.org/10.1007/s11242-023-01911-x

Kumar , R., Sandhu, K., Ranjan, N., Singh, S., Sarkar, P., Karupppasamy, S. & Ramakrishna, S. (2023). Form exploration on different fabrics using material extrusion based additive manufacturing and end users experience. Journal of Manufacturing Processes, 101, 959-973. https://doi.org/10.1016/j.jmapro.2023.06.053

Glisic, M. (2023). Guiding production planning to improve manufacturing process inventory data collection and modelling. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus Universitet.

Cristóbal, A. B., Narvarte, L., Victoria, M., Fialho, L., Zhang, Z., Sanz-Cuadrado, C. & Bokalič, M. (2023). Igniting University Communities: Building Strategies that Empower an Energy Transition through Solar Energy Communities. Solar RRL, 7(24), Artikel 2300498. https://doi.org/10.1002/solr.202300498

Addo-Tenkorang, R., Møller, C. & Chen, K. L. (2023). Industrial Transformation Roadmap for Digitalisation and Smart Factories: The Danish SMEs Model. I S. Hammoudi, F. Wijnhoven & M. van Sinderen (red.), Proceedings of the 20th International Conference on Smart Business Technologies, ICSBT 2023 (s. 144-153). SCITEPRESS Digital Library. https://doi.org/10.5220/0012094300003552

Colombo, M., Chaudhry, P., Oberholzer, Y. & deMello, A. J. (2023). Integrative modeling of hemodynamic changes and perfusion impairment in coronary microvascular disease. Frontiers in Bioengineering and Biotechnology, 11, Artikel 1204178. https://doi.org/10.3389/fbioe.2023.1204178

Amarloo, A., Cinnella, P., Iosifidis, A., Forooghi, P. & Abkar, M. (2023). Investigation of Data-driven algebraic Reynolds stress models for turbulent secondary flows. I The 14th International ERCOFTAC Symposium on Engineering Turbulence Modelling and Measurements Proceedings https://www.ercoftac.org/etmm/program/conference-program/

Farah, S. (2023). Investment-based optimisation of energy storage design parameters in a grid-connected hybrid renewable energy system. Poster-session præsenteret på 22nd Wind & Solar Integration Workshop, Lyngby, Danmark.

Ali, A., Muqeet, H. A., Khan, T., Hussain, A., Waseem, M. & Niazi, K. A. K. (2023). IoT-Enabled Campus Prosumer Microgrid Energy Management, Architecture, Storage Technologies, and Simulation Tools: A Comprehensive Study. Energies, 16(4), Artikel 1863. https://doi.org/10.3390/en16041863

Dvorak, A. J. & Victoria, M. (2023). Key Determinants of Solar Share in Solar- and Wind-Driven Grids. IEEE Journal of Photovoltaics, 13(3), 476-483. https://doi.org/10.1109/JPHOTOV.2023.3252174

Vernica, T., Aher, G. R., Veluri, B. & Ramanujan, D. (2023). LCAD: A Framework for Coupling Computer-Aided Design and Life Cycle Analysis Visualizations. I ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 28th Design for Manufacturing and the Life Cycle Conference (DFMLC) Artikel DETC2023-116573, V005T05A007; American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2023-116573

Vadrot, A. F., I. A. Yang, X., Bae, H. J. & Abkar, M. (2023). Log-law recovery through reinforcement-learning wall model for large eddy simulation. Physics of Fluids, 35(5), Artikel 055122 . https://doi.org/10.1063/5.0147570

Bodden, J., Dieckmeyer, M., Sollmann , N., Rühling, S., Prucker, P., T. Löffler, M., Burian, E., Karupppasamy, S., Zimmer, C., Kirschke , J. S. & Baum, T. (2023). Long-term reproducibility of opportunistically assessed vertebral bone mineral density and texture features in routine clinical multi-detector computed tomography using an automated segmentation framework. Quantitative Imaging in Medicine and Surgery (QIMS), 13(9), 5472-5482. https://doi.org/10.21037/qims-23-19

Binedell, T., Gupta, U., Sithanathan, B., Karupppasamy, S. & Blessing, L. (2023). Mapping lines of non-extension in persons with lower limb amputation to aid comfort-driven prosthetic socket design. Medical Engineering & Physics, 118, Artikel 104018. https://doi.org/10.1016/j.medengphy.2023.104018

Alameen, E. H. O., Lucantonio, A. & DeSimone, A. (2023). Mechanics and transient morphing of soft hygroscopic bilayers. Mechanics Research Communications, 131, Artikel 104131. https://doi.org/10.1016/j.mechrescom.2023.104131

Dias, M. A., Athanasiadis, A., Fernando, D. N. & Budzik, M. K. (2023). Micromechanics of architected interfaces. 73. Abstract fra International Conference on Adhesive Bonding 2023, Porto, Portugal.

Nemati, N., Manhard, A., Greuner, H., Hunger, K., Böswirth, B., Visca, E. & You, J. H. (2023). Microstructural evolution of tungsten under thermal loads: A comparative study between cyclic high heat flux loading and isochronous furnace heating. Nuclear Materials and Energy, 36, Artikel 101465. https://doi.org/10.1016/j.nme.2023.101465

Šeta, B., Sandberg, M., Brander, M., Tusher Mollah, M., Pokkalla, D., Kumar, V. & Spangenberg, J. (2023). Modeling fiber orientation and strand shape morphology in three-dimensional material extrusion additive manufacturing. Composites Part B: Engineering, 266, Artikel 110957. https://doi.org/10.1016/j.compositesb.2023.110957

Brandt, A. (2023). Noise and Vibration Analysis: Signal Analysis and Experimental Procedures. (2 udg.) Wiley. https://doi.org/10.1002/9781118962176

Farhadiyadkuri, F. & Zhang, X. (2023). Novel Interaction Control in Adolescent Idiopathic Scoliosis Treatment Using a Robotic Brace. Journal of Intelligent and Robotic Systems: Theory and Applications, 109(3), Artikel 73. https://doi.org/10.1007/s10846-023-02010-1

Mula, B. B., Escalona, J., Lambert, R., Ling, R. & Balling, O. (2023). On the definition and effect of optimum gear microgeometry modifications for the gearbox of an offshore 10-MW wind turbine. Wind Energy, 26(7), 717-740. https://doi.org/10.1002/we.2825

Viser resultater 301 til 350 ud af 560

Forrige

Næste

Revideret 22.02.2024

Institut for Mekanik og Produktion