Publikationer

Her finder du en samlet liste over de publikationer, som er lavet af medarbejdere ved Institut for Mekanik og Produktion for eksempel tidsskriftsartikler, bøger, rapporter m.v.

Publikationsliste

Sortér efter: Dato | Forfatter | Titel

Geckeler, C., Kirchgeorg, S., Strunk, G., Thostrup, F. B., Sangermano, F., Desiderato, A., Lüthi, M., Jucker, M., Gonzalez Herrera, M. A., Franco-Sierra, N. D., Pulido-Santacruz, P., Marc Chang, J. J., Aden Ip, Y. C., Mächler, E., Svenning, A., Mougeot, G., Høye, T. T., Fopp, F., Pellissier, L. ... Mintchev, S. (2025). Field Deployment of BiodivX Drones in the Amazon Rainforest for Biodiversity Monitoring. IEEE Transactions on Field Robotics, 2, 336-352. https://doi.org/10.1109/TFR.2025.3574945

Hesse, N., Strack, D., Rischewski, J. F., Gassert, F. T., Kufner, A., Urban, T., Lochschmidt, M. E., Schwaiger, B. J., Braun, C., Mueller, D. P., Pfeiffer, D., Baum, T., Subburaj, K., Pfeiffer, F. & Gersing, A. S. (2025). Finite element fracture load analysis and dark-field X-ray imaging of osteoporotic and healthy vertebrae in human lumbar spine specimens. BMC Musculoskeletal Disorders, 26(1), Artikel 545. https://doi.org/10.1186/s12891-025-08709-6

Gøtske, E. K., Pratama, Y., Andresen, G. B., Gidden, M. J., Victoria, M. & Zakeri, B. (2025). First steps towards bridging integrated assessment modeling and high-resolution energy system models: a scenario matrix for a low-emissions sector-coupled European energy system. Environmental Research Communications, 7(8), Artikel 085010. https://doi.org/10.1088/2515-7620/adf60d

Ledda, P. G., Garg, H., Østergaard-Clausen, V., Rudzki, L. K., Madary, A. & Pezzulla, M. (2025). Fluid-induced snap-through instability of spherical shells. Physical Review Letters, 135, Artikel 234002. https://doi.org/10.1103/ltqy-d53p

Sandhu, K., Karupppasamy, S., Pal, M., Sarkar, P. & Singh, S. (red.) (2025). Footwear Innovation: From Conceptual Design through to Advanced Manufacturing Techniques. (1 udg.) Elsevier, Academic Press. https://doi.org/10.1016/C2023-0-52605-9

Tarpø, M. G., Ulriksen, M. D., Augustyn, D., Dollerup, N., Caglio, L. & Sørensen, J. D. (2025). Full-field stress estimation of offshore structures using modal expansion and principal component analysis. Journal of Sound and Vibration, 618(Part B), Artikel 119295. https://doi.org/10.1016/j.jsv.2025.119295

Vernica, T. (2025). Geometry-Centric Life Cycle Data Mapping and Visualization for Sustainable Product Design. [Ph.d.-afhandling, Aarhus Universitet].

Taylor, A. P., Vankayalapati, G. S., Budzik, M. K. & Turner, K. T. (2025). Hinged Rigid Beam Fracture Specimen for Characterization of Lattice and Thin-Sheet Materials. Experimental Mechanics, 65(9), 1375–1386. https://doi.org/10.1007/s11340-025-01214-w

Bontempi, L., Zattoni, M., Ramella, A., Migliavacca, F., Ringgaard, S., Kim, W. Y., Johansen, P. & Colombo, M. (2025). Idealized aortic annuloplasty FSI digital twin of 3D-printed phantoms with 4D-flow MRI comparison. Computers in Biology and Medicine, 192, Artikel 110398. https://doi.org/10.1016/j.compbiomed.2025.110398

Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Identification of Skills for Entrepreneurial Thinking Using Natural Language Processing: An Exploration of Entrepreneurs, Faculties Members and Design Students. I A. Chakrabarti, V. Singh, P. S. Onkar & M. Shahid (red.), Responsible and Resilient Design for Society - Proceedings of ICoRD 2025 (Bind 4, s. 255-266). Springer Science+Business Media. https://doi.org/10.1007/978-981-96-5495-6_20

Truong, T. T., Airao, J., Fattahi, S., Azarhoushang, B., Karras, P. & Aghababaei, R. (2025). Image-based machine learning model for tool wear estimation in milling Inconel 718. Wear, 571, Artikel 205865. https://doi.org/10.1016/j.wear.2025.205865

Bernal, D., Brandt, A. & Ulriksen, M. D. (2025). Improved Consistency on a Common Virtual Sensing Scheme. Abstract fra IMAC XLIII, Orlando, Florida, USA.

Mansour, R., Enblom, P., Subasic, M., Ireland, A., Gustavsson, F., Forssgren, B. & Efsing, P. (2025). Influence of temperature-dependent viscoplastic relaxation and strain-induced martensitic transformation on the fatigue life of 304L stainless steel. International Journal of Fatigue, 198, Artikel 108992. https://doi.org/10.1016/j.ijfatigue.2025.108992

Aher, G., Sandberg, M., Boudjadar, J. & Ramanujan, D. (2025). Informing circularity-focused design optimization using parametric life-cycle engineering simulation models. Smart and Sustainable Manufacturing Systems, 9(1), 11-36. https://doi.org/10.1520/SSMS20240018

Strack, D., Mesbah, M., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2025). Interpatient variability and validation of simplified L4-L5 Finite Element Model. Abstract fra The XXX Congress of the International Society of Biomechanics , Stockholm, Sverige. https://www.researchgate.net/publication/395188992_Interpatient_variability_and_validation_of_simplified_L4-L5_Finite_Element_Model

Sandhu, K., Singh, G., Subburaj, K., Sarkar, P. & Pal, M. (2025). Introduction. I Footwear Innovation: From Conceptual Design through to Advanced Manufacturing Techniques (s. 3-6). Elsevier. https://doi.org/10.1016/B978-0-443-26751-2.00025-3

Pimentel de Figueiredo, R. (2025). Knowledge-Guided Symbolic Regression for Interpretable Camera Calibration. Journal of Imaging, 11(11), Artikel 389. https://doi.org/10.3390/jimaging11110389

Nozarian, S., Hansen, C., Forooghi, P. & Abkar, M. (2025). Laminarization through annular gap injection in turbulent pipe flows: A large eddy simulation study. Physics of Fluids, 37(5), Artikel 055128 . https://doi.org/10.1063/5.0264788

Victoria, M., Zhang, Z., Andresen, GB., Rahdan, P. & Gøtske, EK. (2025). Lessons Learned From Establishing a Rooftop Photovoltaic System Crowdsourced by Students and Employees at Aarhus University. Progress in Photovoltaics: Research and Applications, 33(10), 1046-1055. https://doi.org/10.1002/pip.70009

Shojaeifard, M., Ferraresso, M., Lucantonio, A. & Bacca, M. (2025). Machine learning-based optimal design of fibrillar adhesives. Journal of the Royal Society Interface, 22(223), Artikel 20240636. https://doi.org/10.1098/rsif.2024.0636

Luo, X., Andriollo, T., Baxevanakis, K. P. & Silberschmidt, V. V. (2025). Microstructural effect on fracture evolution in spheroidal graphite iron: Numerical analysis. Engineering Failure Analysis, 174, Artikel 109459. https://doi.org/10.1016/j.engfailanal.2025.109459

Kristensen, C. K., Kirkegaard, J., Sanporean, C.-G., Budzik, M. K. & Sandberg, M. (2025). Mitigating Discoloration in PA11 SLS: Experimental DoE and Novel Simulation Approaches.

Manti, S. (2025). Model Discovery via Symbolic Regression with Applications to Fluid Transport Problems. [Ph.d.-afhandling, Aarhus Universitet].

Alvandifar, N., Mahravan, E., Christensen, K. G. & Forooghi, P. (2025). Modeling of two-phase CO₂ ejectors using an Eulerian–Eulerian two-fluid approach. International Journal of Refrigeration, 177, 338-350. https://doi.org/10.1016/j.ijrefrig.2025.05.020

Hansen, C. (2025). Modern Perspectives on Wall-Bounded Turbulence Modeling: Merging Physics-based and Data-Driven Approaches. [Ph.d.-afhandling, Aarhus Universitet].

Jacobsen, A. N., Mahravan, E., Kragh-Schwarz, M. V., Catalano, J. & Fooroghi, P. (2025). Multiphysics simulations of alkaline water electrolyzer cells — A sensitivity study on the effect of two-phase flow modeling. Electrochimica Acta, 541, Artikel 147148. https://doi.org/10.1016/j.electacta.2025.147148

Spangsberg, E., Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Multiscale Modelling of Heat Transfer in Selective Laser Sintering. engrXiv. https://doi.org/10.31224/4704

Li, W., Negahban, M., Zhang, W., Zhang, L. & Zhu, J. (2025). Network yield and detangling as a tool for modeling back-stress network softening: A thermodynamically consistent model for polycarbonate. International Journal of Engineering Science, 215, Artikel 104322. https://doi.org/10.1016/j.ijengsci.2025.104322

Bazmohammadi, N., Madary, A., Vasquez, J. C. & Guerrero, J. M. (2025). New Horizons for Control and Energy Management of Closed-Ecological Systems: Insights and Future Trends. IEEE Industrial Electronics Magazine, 19(1), 2-14. https://doi.org/10.1109/MIE.2024.3437341

Taffetani, M. & Pezzulla, M. (2025). Nonlinear morphoelastic energy based theory for stimuli responsive elastic shells. ArXiv.

Ostrowski, H., Sandberg, M. & Budzik, M. K. (2025). Novel fracture mechanics tests for thin 3D printed materials. Abstract fra EPF European Polymer Congress, Groningen, Holland.

Niknafs, S., Silani, M., Concli, F. & Aghababaei, R. (2025). Numerical analysis of fatigue crack propagation using a coarse-grained molecular dynamics approach. International Journal of Solids and Structures, 311, Artikel 113245. https://doi.org/10.1016/j.ijsolstr.2025.113245

Malekan, M., Madsen, K. L., Airao, J., Ilvig, C. F. & Aghababaei, R. (2025). Numerical assessment of tool geometry for improving productivity in milling stainless steel 316 L. International Journal of Advanced Manufacturing Technology, 136(7), 3451-3463. Artikel 109782. https://doi.org/10.1007/s00170-025-15061-5

Rahdan, P. (2025). On the role of solar photovoltaics and demand management in the transition of the European energy system to net-zero emissions. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus University Library.

Wei, R., Alfaro, E., Wang, T. & Wu, M. (2025). Optimizing In-Situ Strengthening of Low-Strength Porous Mortar Using a Definitive Screening Design Study. Afhandling præsenteret på The 2nd International Conference on Net-Zero Built Environment: Innovations in Materials, Structures, and Management, Cape Town, Sydafrika.

Paggetti, F., Gherardini, M., Lucantonio, A. & Cipriani, C. (2025). Optimizing the Myokinetic Interface: A Finite Element Model to Predict Displacement in Amputated Muscles. I 2025 International Conference on Rehabilitation Robotics, ICORR 2025 (s. 376-381). IEEE Computer Society Press. https://doi.org/10.1109/ICORR66766.2025.11063137

Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Particle Flow and Printing Path Effects in SLS. Abstract fra EPF European Polymer Congress, Groningen, Holland.

Lawson, N. J., Migliorini, M., Doll, U., Melnikov, S., Steinbock, J., Dues, M., Zachos, P. K., Röhle, I. & MacManus, D. G. (2025). Pathway to Non-Intrusive In-Flight Flow Diagnostics with Filtered Rayleigh Scattering. SAE International Journal of Aerospace, 19(1). https://doi.org/10.4271/01-19-01-0001

Hassan, H., Chatterjee, A., Bushagour, A. & Layton, A. (2025). POTENTIAL FOR DIGITAL TECHNOLOGIES AND ADDITIVE MANUFACTURING TO SUPPORT LEAN MANUFACTURING AND CIRCULAR ECONOMY SYNERGIES. I International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: Volume 2A: 45th Computers and Information in Engineering Conference (CIE) Artikel v02at02a040 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2025-169490

Karupppasamy, S. (2025). Pragmatic customization in medical device design for sustainable healthcare. I P. Kyratsis, A. Manavis & P. J. Davim (red.), CAD/CAM: Computer-Aided Design and Manufacturing, (s. 143). De Gruyter. https://doi.org/10.1515/9783111585062-007

Bardella, L. & Jensen, H. M. (2025). Preface: Thematic session SM12 on Plasticity, Viscoplasticity and Creep of the 26th International Congress of Theoretical and Applied Mechanics (ICTAM2024). International Journal of Solids and Structures, 322, Artikel 113624. https://doi.org/10.1016/j.ijsolstr.2025.113624

Paggi, M. & Aghababaei, R. (2025). Preface: Contact Mechanics and Tribology in the ICTAM Century. International Journal of Solids and Structures, 323, Artikel 113642. https://doi.org/10.1016/j.ijsolstr.2025.113642

Kirikova, M., Forbrig, P. & Møller, C. (2025). Preface: 10th Workshop on Managed Complexity (ManComp). CEUR Workshop Proceedings, 4034. https://ceur-ws.org/Vol-4034/preface.pdf

Gallego-Castillo, C. & Victoria, M. (2025). PyPSA-Spain: An extension of PyPSA-Eur to model the Spanish energy system. Energy Strategy Reviews, 60, Artikel 101764. https://doi.org/10.1016/j.esr.2025.101764

Ip, Y. C. A., Montemartini, L., Chang, J. J. M., Desiderato, A., Franco-Sierra, N. D., Geckeler, C., Herrera, M. A. G., Gregorini, M., Jucker, M., Kirchgeorg, S., Lüthi, M., Mächler, E., Thostrup, F. B., Murari, G., Mura, M., Pulido-Santacruz, P., Sangermano, F., Schindler, T., Melvad, C. ... Deiner, K. (2025). Real-time malaria detection in the Amazon rainforest via drone-collected eDNA and portable qPCR. One Health, 21, Artikel 101167. https://doi.org/10.1016/j.onehlt.2025.101167

Poulsen, E., Rysgaard, S., Melvad, P. & Melvad, C. (2025). Rugged, low-cost, and lightweight rosette water sampler for ocean profiling and mooring deployment. HardwareX, 22, Artikel e00661. https://doi.org/10.1016/j.ohx.2025.e00661

Clausen, J. B. B., Møller, C., Asmussen, C. & Jørgensen, S. (2025). Self-service business intelligence systems in production domains: Introducing data democratization and mass customizable mashups. Digital Business, 5(2), Artikel 100156. https://doi.org/10.1016/j.digbus.2025.100156

Ulriksen, M. D. & Bernal, D. (2025). Sensitivity-based model updating with parameter rejection. Applied Mathematical Modelling, 148, Artikel 116253. https://doi.org/10.1016/j.apm.2025.116253

Zeyen, E., Kalweit, S., Victoria, M. & Brown, T. (2025). Shifting burdens: how delayed decarbonisation of road transport affects other sectoral emission reductions. Environmental Research Letters, 20(4), Artikel 044044. https://doi.org/10.1088/1748-9326/adc290

Calafà, M., Jensen, H. M. & Andriollo, T. (2025). Solving plane crack problems via enriched holomorphic neural networks. Engineering Fracture Mechanics, 322, Artikel 111133. https://doi.org/10.1016/j.engfracmech.2025.111133

Viser resultater 101 til 150 ud af 578

Forrige

Næste

Revideret 22.02.2024

Institut for Mekanik og Produktion