Institut for Mekanik og Produktion

Aarhus Universitets segl

Publications by Design and Manufacturing

Are you looking for publications by Section of Design and Manufacturing? On this page you can find all the publications made by the Section of Design and Manufacturing - Department of Mechanical and Production Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sortér efter: Dato | Forfatter | Titel

Yee, A. Z. H., Kwok, B., Ng, J., Loy, G. P., Ng, L. Y., Sng, J. R. H., Perrault, S., Lim, K. H. & Subburaj, K. (2025). Why Older Adults Integrate Digital Health Technology Into Their Everyday Lives: The Role of Basic Psychological Needs. Human Behavior and Emerging Technologies, 2025(1), Artikel 9711661. https://doi.org/10.1155/hbe2/9711661
Vernica, T., Glišić, M., Veluri, B. & Ramanujan, D. (2023). Volumetric mapping and visualization of life cycle assessment results on computer-aided design models. Journal of Cleaner Production, 418, Artikel 138035. https://doi.org/10.1016/j.jclepro.2023.138035
Eheliyagoda, D., Veluri, B., Liu, G. & Ramanujan, D. (2025). Unveiling the multiregional circular economy pathways for global dysprosium constraints. Resources, Conservation and Recycling, 215, Artikel 108121. https://doi.org/10.1016/j.resconrec.2024.108121
Strack, D., Dieckmeyer, M., Sollmann , N., Kirschke , J. S. & Karupppasamy, S. (2025). Unexpectedly Higher Finite Element-Derived Strength in Fractured Vertebrae: Insights from a Retrospective Study. Abstract fra Annual Meeting of the American Society of Bone and Mineral Research, Seattle, Washington, USA. https://doi.org/10.13140/RG.2.2.18868.72321
Feng, H., Gomes, C., Sandberg, M., Macedo, H. D. & Larsen, P. G. (2022). Under What Conditions Does a Digital Shadow Track a Periodic Linear Physical System? I A. Cerone, M. Autili, A. Bucaioni, C. Gomes, P. Graziani, M. Palmieri, M. Temperini & G. Venture (red.), Software Engineering and Formal Methods. SEFM 2021 Collocated Workshops - CIFMA, CoSim-CPS, OpenCERT, ASYDE, Revised Selected Papers (s. 143-155). Springer. https://doi.org/10.1007/978-3-031-12429-7_11
Kaur, S., Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Understanding User Experience: Exploration of Various Definitions Using Natural Language Process. I A. Chakrabarti, V. Singh, P. S. Onkar & M. Shahid (red.), Responsible and Resilient Design for Society: Proceedings of ICoRD 2025 (Bind 4, s. 231-241). Springer. https://doi.org/10.1007/978-981-96-5495-6_18
Sandhu, K., Sarkar, P. & Karupppasamy, S. (2025). Understanding entrepreneurial thinking for designers: Perspectives from entrepreneurs, academicians, product designers, and students. Thinking Skills and Creativity, 56, Artikel 101728. https://doi.org/10.1016/j.tsc.2024.101728
Eheliyagoda, D., Ramanujan, D., Veluri, B., Liu, Q. & Liu, G. (2023). Tracing the multiregional evolution of the global dysprosium demand-supply chain. Resources, Conservation & Recycling, 199, Artikel 107245. https://doi.org/10.1016/j.resconrec.2023.107245
Aher, G. R., Boudjadar, J. & Ramanujan, D. (2023). Towards Simulation-Based Circular Product Design. Procedia CIRP, 116, 690-695. https://doi.org/10.1016/j.procir.2023.02.116
Mirzaiee, R., Vernica, T., Scheuringer, K. & Bernstein, W. Z. (2022). Towards Retargetable Animations for Industrial Augmented Reality. I Proceedings - 2022 IEEE Conference on Virtual Reality and 3D User Interfaces Abstracts and Workshops, VRW 2022 (s. 872-873). IEEE. https://doi.org/10.1109/VRW55335.2022.00287
Hejlskov Hansen, M., Vernica, T., Mansour, R. & Ramanujan, D. (2024). Three-Dimensional Visualization of Energy Consumption Data in Additive Manufacturing. I 44th Computers and Information in Engineering Conference (CIE): 44th Computers and Information in Engineering Conference (CIE) (Bind 2A). Artikel V02AT02A046 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2024-143405
Ramanujan, D., Bernstein, W. Z., Diaz-Elsayed, N. & R. Haapala, K. (2023). The Role of Industry 4.0 Technologies in Manufacturing Sustainability Assessment. Journal of Manufacturing Science and Engineering, 145(1), Artikel 010801. https://doi.org/10.1115/1.4055661
Lerchl, T., Strack, D., Allaire, B., Yee, E., Scott, R., Nispel, K., Moeller, H., Graf, R., Karupppasamy, S., Kirschke , J. S., Bouxsein, M. L. & Anderson, D. E. (2025). THE EFFECTS OF PREVALENT VERTEBRAL FRACTURES ON SPINAL BIOMECHANICS. Abstract fra 20th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Barcelona, Spanien. https://www.researchgate.net/publication/397941200_THE_EFFECTS_OF_PREVALENT_VERTEBRAL_FRACTURES_ON_SPINAL_BIOMECHANICS
Aher, G. R., Macedo, H. D., Larsen, P. G. & Ramanujan, D. (2023). Supporting Design for Circular Economy Using Lifecycle Co-Simulation. I ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 28th Design for Manufacturing and the Life Cycle Conference (DFMLC) Artikel DETC2023-116537, V005T05A006; American Society of Mechanical Engineers. https://doi.org/10.1115/DETC2023-116537
Šeta, B., Brander, M., Sandberg, M., Mollah, M. T., Kumar, V. & Spangenberg, J. (2026). Subvoxel Control of Fiber Orientation via Multidirectional Shearing in 3D Printing. Advanced Science, 13(9), Artikel e11008. https://doi.org/10.1002/advs.202511008
Karupppasamy, S., Singh, S., Ćuković, S., Sandhu, K., Meixner, G. & Petruse, R. E. (red.) (2024). Smart VR/AR/MR Systems for Professionals. CRC Press. https://doi.org/10.1201/9781003306078
Strack, D., Manohar Rayudu, N., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2026). Reduction of material groups for vertebral bone finite element simulation: cross comparison of grouping methods. Computer Methods in Biomechanics and Biomedical Engineering, 29(5), 941-951. https://doi.org/10.1080/10255842.2024.2422901
Efeoǧlu, A. & Moller, C. (2023). Redesigning design thinking for codesign with nondesigners: a method efficiency perspective. Design Science, 9, Artikel e14. https://doi.org/10.1017/dsj.2023.11
Abedi, M., Chang, A., Hassan, H. I., Yang, A., Hickethier, M. L., Bushagour, A. H., Aghajari, M., Stoerzinger, K. A., Layton, A., Abbasi, B., Chang, C. H. & Feng, Z. (2026). Recovering Critical Metals from Brines: Technology Landscape, Circular Economy, and Future Trends. ACS Applied Energy Materials, 9(4), 2005-2034. https://doi.org/10.1021/acsaem.5c03407
Alzweighi, M., Mansour, R., Maass, A., Hirn, U. & Kulachenko, A. (2024). Predicting moisture penetration dynamics in paper with machine learning approach. International Journal of Solids and Structures, 288, Artikel 112602. https://doi.org/10.1016/j.ijsolstr.2023.112602
Karupppasamy, S. (2025). Pragmatic customization in medical device design for sustainable healthcare. I P. Kyratsis, A. Manavis & P. J. Davim (red.), CAD/CAM: Computer-Aided Design and Manufacturing, (s. 143). De Gruyter. https://doi.org/10.1515/9783111585062-007
Hassan, H., Chatterjee, A., Bushagour, A. & Layton, A. (2025). POTENTIAL FOR DIGITAL TECHNOLOGIES AND ADDITIVE MANUFACTURING TO SUPPORT LEAN MANUFACTURING AND CIRCULAR ECONOMY SYNERGIES. I International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: Volume 2A: 45th Computers and Information in Engineering Conference (CIE) Artikel v02at02a040 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2025-169490
Strack, D., Nispel, K., Kirschke, J. S. & Subburaj, K. (2026). PBMGA-python-based bone material grouping and anisotropy, a software tool to automatically assign advanced material properties. Medical engineering & physics, 147(5). https://doi.org/10.1088/1873-4030/ae5a3f
Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Particle Flow and Printing Path Effects in SLS. Abstract fra EPF European Polymer Congress, Groningen, Holland.
Strack, D., Manohar Rayudu, N., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2024). OPTIMIZING PATIENT-SPECIFIC BONE FINITE ELEMENT ANALYSIS: MESH CONVERGENCE AND MATERIAL GROUPING STRATEGIES. Orthopaedic Proceedings, 127. https://doi.org/10.1302/1358-992X.2024.18.127
Šeta, B., Sandberg, M., Brander, M., Mollah, M. T., Pokkalla, D. K., Kumar, V. & Spangenberg, J. (2024). Numerical modeling of fiber orientation in multi-layer, isothermal material-extrusion big area additive manufacturing. Additive Manufacturing, 92, Artikel 104396. https://doi.org/10.1016/j.addma.2024.104396
Ostrowski, H., Sandberg, M. & Budzik, M. K. (2025). Novel fracture mechanics tests for thin 3D printed materials. Abstract fra EPF European Polymer Congress, Groningen, Holland.
Durocher, H., Bachmann, C., Mozzillo, R., Janeschitz, G. & Zhang, X. (2026). Multibody Dynamics with Joint Modeling and Trajectory Optimization for the Breeding Blanket Vertical Transporter Robot. Fusion Engineering and Design, 229, Artikel 115788. https://doi.org/10.1016/j.fusengdes.2026.115788
Abbiati, G., Gomes, C., Sandberg, M., Kazemi, Z., Hansen, S. T. & Larsen, P. G. (2024). Modelling for Digital Twins. I J. Fitzgerald, C. Gomes & P. G. Larsen (red.), The Engineering of Digital Twins (s. 89-127). Springer. https://doi.org/10.1007/978-3-031-66719-0_5
Šeta, B., Sandberg, M., Brander, M., Tusher Mollah, M., Pokkalla, D., Kumar, V. & Spangenberg, J. (2023). Modeling fiber orientation and strand shape morphology in three-dimensional material extrusion additive manufacturing. Composites Part B: Engineering, 266, Artikel 110957. https://doi.org/10.1016/j.compositesb.2023.110957
Kristensen, C. K., Kirkegaard, J., Sanporean, C.-G., Budzik, M. K. & Sandberg, M. (2025). Mitigating Discoloration in PA11 SLS: Experimental DoE and Novel Simulation Approaches.
Binedell, T., Gupta, U., Sithanathan, B., Karupppasamy, S. & Blessing, L. (2023). Mapping lines of non-extension in persons with lower limb amputation to aid comfort-driven prosthetic socket design. Medical Engineering & Physics, 118, Artikel 104018. https://doi.org/10.1016/j.medengphy.2023.104018
Bodden, J., Dieckmeyer, M., Sollmann , N., Rühling, S., Prucker, P., T. Löffler, M., Burian, E., Karupppasamy, S., Zimmer, C., Kirschke , J. S. & Baum, T. (2023). Long-term reproducibility of opportunistically assessed vertebral bone mineral density and texture features in routine clinical multi-detector computed tomography using an automated segmentation framework. Quantitative Imaging in Medicine and Surgery (QIMS), 13(9), 5472-5482. https://doi.org/10.21037/qims-23-19
Vernica, T., Aher, G. R., Veluri, B. & Ramanujan, D. (2023). LCAD: A Framework for Coupling Computer-Aided Design and Life Cycle Analysis Visualizations. I ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 28th Design for Manufacturing and the Life Cycle Conference (DFMLC) Artikel DETC2023-116573, V005T05A007; American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2023-116573
He, L., Zhang, M., Wang, P., Li, J., Wang, H., Wang, Y., Ye, X., Yan, X., Zhou, S., Liu, S., Zhao, P. & Zhou, X. (2026). Laser melting deposition of dual-phase tungsten-based refractory high-entropy alloys: Face-centered cubic-driven strength and ductility synergy revealed by first-principles calculations. Journal of Materials Science and Technology, 265, 100-111. https://doi.org/10.1016/j.jmst.2025.12.033
Borbolla Muñoz, A., Nezar Aboujarra, M. & Ramanujan, D. (2024). Investigating Sustainable Production Planning of an Industrial Progressive Die Stamping Process Using Discrete Event Simulation. I 29th Design for Manufacturing and the Life Cycle Conference (DFMLC): 29th Design for Manufacturing and the Life Cycle Conference (DFMLC) (Bind 5). Artikel V005T05A006 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2024-143648
Durocher, H., Bachmann, C., Mozzillo, R., Janeschitz, G. & Zhang, X. (2026). Inverse Kinematics and Statics-Based Motion Planning of a 7-DoF Transporter for DEMO-Type Breeding Blankets. Machines, 14(5), Artikel 469. https://doi.org/10.3390/machines14050469
Sandhu, K., Singh, G., Subburaj, K., Sarkar, P. & Pal, M. (2025). Introduction. I Footwear Innovation: From Conceptual Design through to Advanced Manufacturing Techniques (s. 3-6). Elsevier. https://doi.org/10.1016/B978-0-443-26751-2.00025-3
Strack, D., Mesbah, M., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2025). Interpatient variability and validation of simplified L4-L5 Finite Element Model. Abstract fra The XXX Congress of the International Society of Biomechanics , Stockholm, Sverige. https://www.researchgate.net/publication/395188992_Interpatient_variability_and_validation_of_simplified_L4-L5_Finite_Element_Model
Feng, H., Gomes, C., Gil Arboleda, S., Mikkelsen, P. H., Tola, D., Larsen, P. G. & Sandberg, M. (2022). Integration Of The Mape-K Loop In Digital Twins. I C. R. Martin, N. Emami, M. J. Blas & R. Rezaee (red.), Proceedings of the 2022 Annual Modeling and Simulation Conference, ANNSIM (s. 102-113). IEEE. https://doi.org/10.23919/ANNSIM55834.2022.9859489
Aher, G., Sandberg, M., Boudjadar, J. & Ramanujan, D. (2025). Informing circularity-focused design optimization using parametric life-cycle engineering simulation models. Smart and Sustainable Manufacturing Systems, 9(1), 11-36. https://doi.org/10.1520/SSMS20240018
Mansour, R., Enblom, P., Subasic, M., Ireland, A., Gustavsson, F., Forssgren, B. & Efsing, P. (2025). Influence of temperature-dependent viscoplastic relaxation and strain-induced martensitic transformation on the fatigue life of 304L stainless steel. International Journal of Fatigue, 198, Artikel 108992. https://doi.org/10.1016/j.ijfatigue.2025.108992
Zambrano, V., Mueller-Roemer, J., Sandberg, M., Talasila, P., Zanin, D., Larsen, P. G., Loeschner, E., Thronicke, W., Pietraroia, D., Landofi, G., Fontana, A., Laspalas, M., Antony, J., Poser, V., Kiss, T., Bergweiler, S., Pena Serna, S., Izquierdo, S., Viejo, I. ... Stork, A. (2022). Industrial Digitalization in the Industry 4.0 era: Classification, Reuse and Authoring of Digital Models on Digital Twin Platforms. Array, 14, Artikel 100176. https://doi.org/10.1016/j.array.2022.100176
Wang, C., Cong, D., Tang, G., Zhou, X. & Li, J. (2024). Improving thermoelectric properties in double half-Heusler M8FexNi8−xSb8 (M = TiZrHfNb)-InSb compounds via synergistic multiscale defects and high-mobility carrier injection. Chemical Engineering Journal, 496, Artikel 154313. https://doi.org/10.1016/j.cej.2024.154313
Strack, D., Mesbah, M., Manohar Rayudu, N., Baum, T., Kirschke , J. S. & Karupppasamy, S. (2024). IMPACT OF ANNULUS FIBROSUS STIFFNESS ON THE FRACTURE LOAD OF FUNCTIONAL SPINE UNITS. Orthopaedic Proceedings, 102. https://doi.org/10.1302/1358-992X.2024.18.102
Kunrath, K., Leka, S., Abu-Ghaida, H. & Ramanujan, D. (2021). IDENTIFYING INDUSTRY NEEDS FOR INNOVATION SKILLS IN ENGINEERING EDUCATION: A THEMATIC ANALYSIS OF CASES FROM DANISH INDUSTRY. 306-315. Afhandling præsenteret på SEFI 49th Annual Conference: Blended Learning in Engineering Education: Challenging, Enlightening - and Lasting?, Berlin, Virtual, Tyskland.
Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Identification of Skills for Entrepreneurial Thinking Using Natural Language Processing: An Exploration of Entrepreneurs, Faculties Members and Design Students. I A. Chakrabarti, V. Singh, P. S. Onkar & M. Shahid (red.), Responsible and Resilient Design for Society - Proceedings of ICoRD 2025 (Bind 4, s. 255-266). Springer Science+Business Media. https://doi.org/10.1007/978-981-96-5495-6_20
Mosgaard, M. A., Bundgaard, A. M. & Haase, L. M. (2026). How Engagement Drives Circularity: Evidence from Eight Danish Construction Companies Extending Material and Product Lifespans. Journal of Sustainable Development of Energy, Water and Environment Systems, 14(3), Artikel 1140700. https://doi.org/10.13044/j.sdewes.d14.0700
Kumar , R., Sandhu, K., Ranjan, N., Singh, S., Sarkar, P., Karupppasamy, S. & Ramakrishna, S. (2023). Form exploration on different fabrics using material extrusion based additive manufacturing and end users experience. Journal of Manufacturing Processes, 101, 959-973. https://doi.org/10.1016/j.jmapro.2023.06.053
Sandhu, K., Karupppasamy, S., Pal, M., Sarkar, P. & Singh, S. (red.) (2025). Footwear Innovation: From Conceptual Design through to Advanced Manufacturing Techniques. (1 udg.) Elsevier, Academic Press. https://doi.org/10.1016/C2023-0-52605-9

Viser resultater 1 til 50 ud af 91

1

2

Næste

Revideret 13.11.2025
-
AU Engineering