Publications

Below you can find a complete list of the publications that are written by employees at the Publications at Department of Mechanical and Production Engineering for example journal articles, books, reports etc.

Publication list

Sort by: Date | Author | Title

Ledda, P. G., Pezzulla, M., Jambon-Puillet, E., Brun, P. T. & Gallaire, F. (2022). Gravity-driven coatings on curved substrates: a differential geometry approach. Journal of Fluid Mechanics, 949, Article A38. https://doi.org/10.1017/jfm.2022.758

Hu, P., Dias, M. A. & Budzik, M. K. (2024). Geometric tunability of interlaminar resistance. Composites Part B: Engineering, 287, Article 111839. https://doi.org/10.1016/j.compositesb.2024.111839

Zehtabiyan-Rezaie, N., Rahimi Damirchi-Darasi, S., Fazel Zarandi, M. H. & Saffar-Avval, M. (2017). Generalized heat transfer and entropy generation of stratified air-water flow in entrance of a mini-channel. Scientia Iranica, 24(5), 2406-2417. https://doi.org/10.24200/sci.2017.4242

Pedersen, M. T., Hansen, P. L. & Clausen, M. P. (2021). Gastronomy unravelled by physics: Gastrophysics. International Journal of Food Design, 6(2), 153-180. https://doi.org/10.1386/IJFD_00029_1

Gøtske, E. K. & Victoria, M. (2021). Future operation of hydropower in Europe under high renewable penetration and climate change. iScience, 24(9), Article 102999. https://doi.org/10.1016/j.isci.2021.102999

Nguyen, V. H., Oh, S., Mahato, M., Tabassian, R., Yoo, H., Lee, S. G., Garai, M., Kim, K. J. & Oh, I. K. (2024). Functionally antagonistic polyelectrolyte for electro-ionic soft actuator. Nature Communications, 15(1), Article 435. https://doi.org/10.1038/s41467-024-44719-z

Amarloo, A., Forooghi, P. & Abkar, M. (2022). Frozen propagation of Reynolds force vector from high-fidelity data into Reynolds-averaged simulations of secondary flows. Physics of Fluids, 34(11), Article 115102. https://doi.org/10.1063/5.0123231

Alvandifar, N., Kristofersson, J. & Forooghi, P. (2024). Frost formation non-uniformity in a multi-circuit V-shape evaporator. International Journal of Refrigeration, 157, 137-149. https://doi.org/10.1016/j.ijrefrig.2023.10.018

Sahli, R., Mikkelsen, J., Boye, M. S., Dias, M. A. & Aghababaei, R. (2024). Frictional Contact of Soft Polymeric Shells. Physical Review Letters, 133(10), Article 106202. https://doi.org/10.1103/PhysRevLett.133.106202

Budzik, M. K., Heide-Jørgensen, S. & Aghababaei, R. (2021). Fracture mechanics analysis of delamination along width-varying interfaces. Composites Part B: Engineering, 215, Article 108793. https://doi.org/10.1016/j.compositesb.2021.108793

Malekan, M., Budzik, M. K., Jensen, H. M. & Aghababaei, R. (2021). Fracture analyses of surface asperities during sliding contact. Tribology International, 159, Article 106939. https://doi.org/10.1016/j.triboint.2021.106939

Kunrath, K. & Ramanujan, D. (2021). Fostering Sustainable Mindsets In Engineering Education. Proceedings of the Design Society , 1, 1597 - 1606. https://doi.org/10.1017/pds.2021.421

Kumar , R., Sandhu, K., Ranjan, N., Singh, S., Sarkar, P., Karupppasamy, S. & Ramakrishna, S. (2023). Form exploration on different fabrics using material extrusion based additive manufacturing and end users experience. Journal of Manufacturing Processes, 101, 959-973. https://doi.org/10.1016/j.jmapro.2023.06.053

Zehtabiyan-Rezaie, N., Saffar-Avval, M. & Adamiak, K. (2020). Forced convection heat transfer enhancement using a coaxial wire-tube corona system. Journal of Electrostatics, 103, Article 103415. https://doi.org/10.1016/j.elstat.2019.103415

Rincón, M. J., Caspersen, A., Thorenfeldt Ingwersen, N., Reclari, M. & Abkar, M. (2024). Flow investigation of two-stand ultrasonic flow meters in a wide dynamic range by numerical and experimental methods. Flow Measurement and Instrumentation, 96, Article 102543. https://doi.org/10.1016/j.flowmeasinst.2024.102543

Kaneko, S., Nakamura, T., Inada, F., Kato, M., Ishihara, K., Nishihara, T., Mureithi, N. & Langthjem, M. A. (2014). Flow Induced Vibrations: Classifications and Lessons from Practical Experiences . Academic Press.

Sandberg, M., Hattel, J. H. & Spangenberg, J. (2023). Flow‑Induced Fibre Compaction in Resin‑Injection Pultrusion. Transport in Porous Media, 147(3), 541-571. https://doi.org/10.1007/s11242-023-01911-x

Schroll, M., Doll, U., Stockhausen, G., Meier, U., Willert, C., Hassa, C. & Bagchi, I. (2016). FLOW FIELD CHARACTERIZATION AT THE OUTLET OF A LEAN BURN SINGLE SECTOR COMBUSTOR BY LASER-OPTICAL METHODS. In Ceramics; Controls, Diagnostics and Instrumentation; Education; Manufacturing Materials and Metallurgy American Society of Mechanical Engineers(ASME). https://doi.org/10.1115/GT2016-56365

Vero, K., Islam, R. & Borah, J. P. (2023). First-principles study on the enhancement of structure stability and magnetocrystalline anisotropy energy of L1₀-ordered Mn_1−xFe_xAlC compound for permanent magnet application. Journal of Applied Physics, 134(15), Article 153902. https://doi.org/10.1063/5.0172356

Pedersen, M. M. (2015). Fatlab: Free open-source fatigue analysis software. http://www.fatiguetoolbox.org

Subasic, M., Olsson, M., Dadbakhsh, S., Zhao, X., Krakhmale, P. & Mansour, R. (2023). Fatigue strength improvement of additively manufactured 316L stainless steel with high porosity through preloading. International Journal of Fatigue, 180, Article 108077. https://doi.org/10.1016/j.ijfatigue.2023.108077

Zinck Thellufsen, J., Lund, H., Vad Mathiesen, B., Thøis Madsen, P., Østergaard, P. A., Nielsen, S., Sorknæs, P., Wenzel, H., Østergaard, J., Münster, M., Berg Rosendal, M., Madsen, H., Morthorst, P. E., Sørensen, P. B., Bruun Andresen, G., Gøtske, E. K., Pedersen, T. T. & Victoria, M. (2023). Fakta om Atomkraft i Danmark - Version 2: Input til en faktabaseret diskussion af fordele og ulemper ved atomkraft som en del af den grønne omstilling i Danmark. https://vbn.aau.dk/ws/portalfiles/portal/534311584/Fakta_om_atomkraft_V2_FINAL.pdf

Zinck Thellufsen, J., Lund, H., Vad Mathiesen, B., Thøis Madsen, P., Østergaard, P. A., Nielsen, S., Sorknæs, P., Wenzel, H., Münster, M., Berg Rosendal, M., Madsen, H., Østergaard, J., Morthorst, P. E., Sørensen, P. B., Bruun Andresen, G. & Victoria, M. (2022). Fakta om Atomkraft: Input til en faktabaseret diskussion af fordele og ulemper ved atomkraft som en del af den grønne omstilling i Danmark. https://vbn.aau.dk/ws/portalfiles/portal/491533150/Fakta_om_atomkraft_final.pdf

Budzik, M. K., Dias, M. A., Hedvard, M. & Athanasiadis, A. (2023). Failure of architected interfaces. 47. Abstract from International Conference on Adhesive Bonding 2023, Porto, Portugal.

Bokharaie, B., Aghababaei, R. & Budzik, M. K. (2022). Failure of additively manufactured carbon fiber composite hexagonal frames. Abstract from The 20th European Conference on Composite Materials, Lausanne, Switzerland. file:///C:/Users/au564491/Downloads/Abstracts_Monday.pdf

Bokharaie, B.-U., Aghababaei, R., Dias, M. A. & Budzik, M. K. (2024). Failure of 3D-printed composite continuous carbon fibre hexagonal frames. Composites Part B: Engineering, 275, Article 111307. https://doi.org/10.1016/j.compositesb.2024.111307

Rygg Johnsen, A., Petersen, J. E., Pedersen, M. M. & Yildirim, H. C. (2024). Factors affecting the fatigue strength of additively manufactured Ti-6Al-4V parts. Welding in the World, 68(2), 361-409. https://doi.org/10.1007/s40194-023-01604-5

Shkondin, E., Alimadadi, H., Takayama, O., Jensen, F. & Lavrinenko, A. V. (2020). Fabrication of hollow coaxial Al2O3/ZnAl2O4 high aspect ratio freestanding nanotubes based on the Kirkendall effect. Journal of Vacuum Science Technology A: Vacuum, Surfaces, and Films, 38(1), 013402. Article 013402.

Hansen, C., Sørensen, J. N., I. A. Yang, X. & Abkar, M. (2024). Extension of the law of the wall exploiting weak similarity of velocity fluctuations in turbulent channels. Physics of Fluids, 36(1), Article 015134. https://doi.org/10.1063/5.0185334

Islam, R., Madsen, S. P. & Christensen, M. (2024). Exploring the magnetic properties of W-type SrFe18O27 hexaferrite: Insights from a first-principles study. Physical Review B, 109(2), Article 024414. https://doi.org/10.1103/PhysRevB.109.024414

Ghasemi, A., Sadough Vanini, S. A., Alizadeh Zolbin, M. & Aghababaei, R. (2024). Exploring the influence of ultrasonic peening treatment at ambient and cryogenic conditions on the surface characteristics and fatigue life of austenitic stainless steel 304L. Surface and Coatings Technology, 494(Part 1 ), Article 131382. https://doi.org/10.1016/j.surfcoat.2024.131382

Pedersen, T. T., Victoria, M., Rasmussen, M. G. & Bruun Andresen, G. (2021). Exploring flexibility of near-optimal solutions to highly renewable energy systems. Abstract from 48th IEEE Photovoltaic Specialists Conference (PVSC).

Pedersen, T. T., Victoria, M., Rasmussen, M. G. & Andresen, G. B. (2021). Exploring flexibility of near-optimal solutions to highly renewable energy systems. In 2021 IEEE 48th Photovoltaic Specialists Conference, PVSC 2021 (pp. 387-391). IEEE. https://doi.org/10.1109/PVSC43889.2021.9518745

Tapetado, P., Victoria, M., Greiner, M. & Usaola, J. (2021). Exploring backup requirements to complement wind, solar and hydro generation in a highly renewable Spanish power system. Energy Strategy Reviews, 38, Article 100729. https://doi.org/10.1016/j.esr.2021.100729

Fulco , S., Budzik, M. K. & Turner, K. (2022). Exploiting architected plasticity to enhance fracture toughness while maintaining strength. Abstract from 19th U.S. National Congress of Theoretical and Applied

Mechanics, Austin, Texas, United States. https://drive.google.com/file/d/1uyFLy4Pk62paHMze4hVJSe7VnknWq1hT/view

Jensen, J. S. K. & Aghababaei, R. (2023). Experimental investigation of three-body wear for rubber seals in abrasive slurry environment. Wear, 534-535, Article 205131. https://doi.org/10.1016/j.wear.2023.205131

Subasic, M., Ireland, A., Mansour, R., Enblom, P., Krakhmalev, P., Åsberg, M., Fazi, A., Gårdstam, J., Shipley, J., Waernqvist, P., Forssgren, B. & Efsing, P. (2024). Experimental investigation and numerical modelling of the cyclic plasticity and fatigue behavior of additively manufactured 316 L stainless steel. International Journal of Plasticity, 176, Article 103966. https://doi.org/10.1016/j.ijplas.2024.103966

Zhou, Z., Li, L., Wang, R. & Zhang, X. (2020). Experimental Eye-in-hand Calibration for Industrial Mobile Manipulators. In 2020 IEEE International Conference on Mechatronics and Automation, ICMA 2020 (pp. 582-587). Article 9233585 IEEE. https://doi.org/10.1109/ICMA49215.2020.9233585

Arumugam, V. K., Mantzaras, J., Gantenbein, A., Doll, U. & Schildhauer, T. (2024). Experimental and numerical investigation of high-pressure methane catalytic synthesis from H2 and CO2. Proceedings of the Combustion Institute, 40(1-4), Article 105206. https://doi.org/10.1016/j.proci.2024.105206

Filsoof, O. T., Yde, A., Bøttcher, P. & Zhang, X. (2020). Experimental Analysis of a Scaled-Down Vestas Four-Rotor Wind Turbine. Journal of Physics: Conference Series, 1618(3), Article 032005. https://doi.org/10.1088/1742-6596/1618/3/032005

D Ranasinghe Mudiyanse Ralahamillage, D. P. E., Veluri, B., Ramanujan, D. & Liu, G. (2023). Examining three decades of global dysprosium supply chain through a material flow analysis. In First IRTC conference: Raw materials for a sustainable future (pp. 20)

Formentini, G. & Ramanujan, D. (2023). EXAMINING THE ROLE AND FUTURE POTENTIAL OF DESIGN FOR DISASSEMBLY METHODS TO SUPPORT CIRCULAR PRODUCT DESIGN. Proceedings of the Design Society , 3, 1735 - 1744. https://doi.org/10.1017/pds.2023.174

Bruun Andresen, G. (2023). Er solceller Danmarks fremtid?. Pictures, Video and sound recordings (digital), YouTube. https://www.youtube.com/watch?v=9XCDwV-rYQA

Rikhardsson, P. (Ed.), Møller, C. (Ed.) & Kræmmergaard, P. (2004). ERP Enterprise Ressource Planning : Danske erfaringer med implementering og anvendelse. Børsen.

Norouzikudiani, R., Lucantonio, A. & DeSimone, A. (2023). Equilibrium and transient response of photo-actuated Liquid Crystal Elastomer beams. Mechanics Research Communications, 131, Article 104126. https://doi.org/10.1016/j.mechrescom.2023.104126

Kræmmergaard, P., Møller, C. & Rikhardsson, P. M. (2005). Enterprise System Management? a position paper. In 2nd International Conference on Enterprise Systems and Accounting 2005 (pp. 28-38). Technological Educational Institution of Thessaloniki, Greece. https://www.researchgate.net/publication/290993979_Enterprise_system_management_-_A_position_paper

Abu Shaid Sujon, M., Andriollo, T. & Islam, A. (2023). Enhancing vibration damping properties of MABS/VDT blends using SEBS‑g‑MAH as a compatibilizer. Journal of Polymer Research, 30, Article 440. https://doi.org/10.1007/s10965-023-03819-y

Fulco , S., Budzik, M. K. & T. Turner , K. T. (2024). Enhancing toughness through geometric control of the process zone. Journal of the Mechanics and Physics of Solids, 184, Article 105548. https://doi.org/10.1016/j.jmps.2024.105548

Berntsen, J., Brandt, A. & Gryllias, K. (2022). Enhanced demodulation band selection based on Operational Modal Analysis (OMA) for bearing diagnostics. Mechanical Systems and Signal Processing, 181, Article 109300. https://doi.org/10.1016/j.ymssp.2022.109300

Gøtske, E. K. (2024). Energy storage and climate impacts on the future renewable European energy system. Aarhus Universistet.

Displaying results 201 to 250 out of 395

Download AU Engineering Profile 2013-2022:

Revised 22.02.2024

AU Engineering