Publications

Below you can find a complete list of the publications that are written by employees at the Publications at Department of Mechanical and Production Engineering for example journal articles, books, reports etc.

Publication list

Sort by: Date | Author | Title

Sadik, S., Walker, M. G. & Dias, M. A. (2022). On local kirigami mechanics II: Stretchable creased solutions. Journal of the Mechanics and Physics of Solids, 161, Article 104812. https://doi.org/10.1016/j.jmps.2022.104812

Sadik, S. & Dias, M. A. (2021). On local kirigami mechanics I: Isometric conical solutions. Journal of the Mechanics and Physics of Solids, 151, Article 104370. https://doi.org/10.1016/j.jmps.2021.104370

Filsoof, O. T., Yde, A., Bøttcher, P. & Zhang, X. (2021). On critical aeroelastic modes of a tri-rotor wind turbine. International Journal of Mechanical Sciences, 204, Article 106525. https://doi.org/10.1016/j.ijmecsci.2021.106525

Abu-Ghaida, H., Leka, S., Kunrath, K., Thostrup, R. & Ramanujan, D. (2021). Økoengineer – A Web-Based Game Platform for Guided Discovery-Based Sustainability Learning in Engineering Curricula. In 18th International Conference on Design Education (DEC): 18th International Conference on Design Education (DEC) (Vol. 4). Article DETC2021-69406, V004T04A014 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2021-69406

Šeta, B., Sandberg, M., Brander, M., Mollah, M. T., Pokkalla, D. K., Kumar, V. & Spangenberg, J. (2024). Numerical modeling of fiber orientation in multi-layer, isothermal material-extrusion big area additive manufacturing. Additive Manufacturing, 92, Article 104396. https://doi.org/10.1016/j.addma.2024.104396

Zheng, W., Ma, L., Pei, S. & Aghababaei, R. (2024). Numerical assessment of transition in cutting mode and its effect on roughness creation. International Journal of Mechanical Sciences, 261, Article 108666. https://doi.org/10.1016/j.ijmecsci.2023.108666

Malekan, M., Madsen, K. L., Airao, J., Ilvig, C. F. & Aghababaei, R. (2025). Numerical assessment of tool geometry for improving productivity in milling stainless steel 316 L. International Journal of Advanced Manufacturing Technology, 136(7), 3451-3463. Article 109782. https://doi.org/10.1007/s00170-025-15061-5

Niknafs, S., Silani, M., Concli, F. & Aghababaei, R. (2025). Numerical analysis of fatigue crack propagation using a coarse-grained molecular dynamics approach. International Journal of Solids and Structures, 311, Article 113245. https://doi.org/10.1016/j.ijsolstr.2025.113245

Farhadiyadkuri, F. & Zhang, X. (2023). Novel Interaction Control in Adolescent Idiopathic Scoliosis Treatment Using a Robotic Brace. Journal of Intelligent and Robotic Systems: Theory and Applications, 109(3), Article 73. https://doi.org/10.1007/s10846-023-02010-1

Ostrowski, H., Sandberg, M. & Budzik, M. K. (2025). Novel fracture mechanics tests for thin 3D printed materials. Abstract from EPF European Polymer Congress, Groningen, Netherlands.

Sujon, M. A. S., Masato, D., Andriollo, T., Pan, Z., Nadimpalli, V. K., Henriquez, V. C. & Islam, A. (2024). Novel approach for optimizing mechanical and damping performance of MABS composites reinforced with basalt fibers: An experimental study. Composites Science and Technology, 251, Article 110578. https://doi.org/10.1016/j.compscitech.2024.110578

Taffetani, M. & Pezzulla, M. (2025). Nonlinear morphoelastic energy based theory for stimuli responsive elastic shells. ArXiv.

Sadik, S. & Yavari, A. (2024). Nonlinear anisotropic viscoelasticity. Journal of the Mechanics and Physics of Solids, 182, Article 105461. https://doi.org/10.1016/j.jmps.2023.105461

Brandt, A. (2023). Noise and Vibration Analysis: Signal Analysis and Experimental Procedures. (2 ed.) Wiley. https://doi.org/10.1002/9781118962176

Bazmohammadi, N., Madary, A., Vasquez, J. C. & Guerrero, J. M. (2025). New Horizons for Control and Energy Management of Closed-Ecological Systems: Insights and Future Trends. IEEE Industrial Electronics Magazine, 19(1), 2-14. https://doi.org/10.1109/MIE.2024.3437341

Li, W., Negahban, M., Zhang, W., Zhang, L. & Zhu, J. (2025). Network yield and detangling as a tool for modeling back-stress network softening: A thermodynamically consistent model for polycarbonate. International Journal of Engineering Science, 215, Article 104322. https://doi.org/10.1016/j.ijengsci.2025.104322

Andriollo, T. (2022). Network science approach to predict the yield strength of metals containing soft particles and pores. I O P Conference Series: Materials Science and Engineering, 1249, Article 012018. https://doi.org/10.1088/1757-899X/1249/1/012018

Andriollo, T., Kouznetsova, V. & Alessandretti, L. (2022). Network approach for the analysis of the irreversible deformation of solids with soft heterogeneities. Physical Review Materials, 6(11), Article L110601 . https://doi.org/10.1103/PhysRevMaterials.6.L110601

Mitra, T., singh, G., Darki, A. A., Madsen, S. P. & Dantan, A. R. (2024). Narrow-linewidth Fano microcavities with resonant subwavelength grating mirror. Optics Express, 32(9), 15667-15679. https://doi.org/10.1364/OE.521329

Moon, J., Mahravan, E. & Kim, D. (2024). Mutual interaction of a collapsing bubble and a nearby viscoelastic solid. Physical Review Fluids, 9(4), Article 043603. https://doi.org/10.1103/PhysRevFluids.9.043603

Spangsberg, E., Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Multiscale Modelling of Heat Transfer in Selective Laser Sintering. engrXiv. https://doi.org/10.31224/4704

Jacobsen, A. N., Mahravan, E., Kragh-Schwarz, M. V., Catalano, J. & Fooroghi, P. (2025). Multiphysics simulations of alkaline water electrolyzer cells — A sensitivity study on the effect of two-phase flow modeling. Electrochimica Acta, 541, Article 147148. https://doi.org/10.1016/j.electacta.2025.147148

Pedersen, S. S., B. Madsen, N., Escalona, J. & Balling, O. (2021). Multibody Models for Tower Vibrations With an Unbalanced Rotor. In 17th International Conference on Multibody Systems, Nonlinear Dynamics, and Control (MSNDC) (Vol. 9). Article V009T09A017 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2021-72182

Zhang, Z., Zhang, L., Jasa, J., Negahban, M. & Gazonas, G. (2022). Molecular sources of ratcheting in poly-dispersed polycarbonate. International Journal of Fatigue, 154, Article 106567. https://doi.org/10.1016/j.ijfatigue.2021.106567

Hansen, C. (2025). Modern Perspectives on Wall-Bounded Turbulence Modeling: Merging Physics-based and Data-Driven Approaches. [PhD thesis, Aarhus University].

Schäfer, K., Stroh, A., Forooghi, P. & Frohnapfel, B. (2022). Modelling spanwise heterogeneous roughness through a parametric forcing approach. Journal of Fluid Mechanics, 930, Article A7. https://doi.org/10.1017/jfm.2021.850

Ninno, F., Chiastra, C., Colombo, M., Dardik, A., Strosberg, D., Aboian, E., Tsui, J., Bartlett, M., Balabani, S. & Díaz-Zuccarini, V. (2024). Modelling lower-limb peripheral arterial disease using clinically available datasets: impact of inflow boundary conditions on hemodynamic indices for restenosis prediction. Computer Methods and Programs in Biomedicine, 251, Article 108214. https://doi.org/10.1016/j.cmpb.2024.108214

Abbiati, G., Gomes, C., Sandberg, M., Kazemi, Z., Hansen, S. T. & Larsen, P. G. (2024). Modelling for Digital Twins. In J. Fitzgerald, C. Gomes & P. G. Larsen (Eds.), The Engineering of Digital Twins (pp. 89-127). Springer. https://doi.org/10.1007/978-3-031-66719-0_5

Alamia, A. & Bruun Andresen, G. (2024). Modelling Alternatives for integrted PtX infrastrcture between Denmark and EU. Poster session presented at 12th European Open Energy Modelling Workshop, Grenoble, France.

Lucantonio, A., Nardinocchi, P., Pezzulla, M., Pugliese, V. & Teresi, L. (2013). Modeling Tools for Soft Robotics. Poster session presented at Soft Robotic Conference, Ascona, Switzerland.

Foldager, F., Munkholm, L. J., Balling, O., Serban, R., Negrut, D., Heck, R. J. & Green, O. (2022). Modeling soil aggregate fracture using the discrete element method. Soil and Tillage Research, 218, Article 105295. https://doi.org/10.1016/j.still.2021.105295

Šeta, B., Sandberg, M., Brander, M., Tusher Mollah, M., Pokkalla, D., Kumar, V. & Spangenberg, J. (2023). Modeling fiber orientation and strand shape morphology in three-dimensional material extrusion additive manufacturing. Composites Part B: Engineering, 266, Article 110957. https://doi.org/10.1016/j.compositesb.2023.110957

Pedersen, T. T., Victoria, M., Rasmussen, M. G. & Bruun Andresen, G. (2021). Modeling all alternative solutions for highly renewable energy systems. Energy, 234, Article 121294. https://doi.org/10.1016/j.energy.2021.121294

Pedersen, T. T., Victoria, M., Rasmussen, M. G. & Bruun Andresen, G. (2021). Modeling all alternative solutions for highly renewable energy systems. Abstract from International Energy Workshop (IEW) 2021, Germany.

Eidi, A., Ghiassi, R., Yang, X. I. A. & Abkar, M. (2021). Model-form uncertainty quantification in RANS simulations of wakes and power losses in wind farms. Renewable Energy, 179, 2212-2223. https://doi.org/10.1016/j.renene.2021.08.012

Cleve, J., Greiner, M., Enevoldsen, P., Birkemose, B. & Jensen, L. (2009). Model-based analysis of wake-flow data in the Nysted offshore wind farm. Wind Energy, 12(2), 125-135. https://doi.org/10.1002/we.314

Filsoof, O. T. (2021). Modal Dynamics and Design Analysis of Multi‐Rotor Wind Turbines. [PhD thesis, Aarhus University]. Aarhus Universitet.

Wang, H. & Zhang, X. (2021). Modal Dynamic Modelling and Experimental Validation of a Curved Extensible Continuum Manipulator. 1958-1965. Paper presented at 2021 IEEE International Conference on Robotics and Automation (ICRA). https://doi.org/10.1109/ICRA48506.2021.9561914

Kristensen, C. K., Kirkegaard, J., Sanporean, C.-G., Budzik, M. K. & Sandberg, M. (2025). Mitigating Discoloration in PA11 SLS: Experimental DoE and Novel Simulation Approaches.

Nemati, N., Manhard, A., Greuner, H., Hunger, K., Böswirth, B., Visca, E. & You, J. H. (2023). Microstructural evolution of tungsten under thermal loads: A comparative study between cyclic high heat flux loading and isochronous furnace heating. Nuclear Materials and Energy, 36, Article 101465. https://doi.org/10.1016/j.nme.2023.101465

Luo, X., Andriollo, T., Baxevanakis, K. P. & Silberschmidt, V. V. (2025). Microstructural effect on fracture evolution in spheroidal graphite iron: Numerical analysis. Engineering Failure Analysis, 174, Article 109459. https://doi.org/10.1016/j.engfailanal.2025.109459

Wieber, C., Jeppesen, M. R., Finster, K., Melvad, C. & Santl-Temkiv, T. (2024). Micro-PINGUIN: microtiter-plate-based instrument for ice nucleation detection in gallium with an infrared camera. Atmospheric Measurement Techniques, 17(9), 2707–2719. https://doi.org/10.5194/amt-17-2707-2024

Aghababaei, R. & Zhao, K. (2021). Micromechanics of material detachment during adhesive wear: A numerical assessment of Archard's wear model. Wear, 476, Article 203739. https://doi.org/10.1016/j.wear.2021.203739

Dias, M. A., Athanasiadis, A., Fernando, D. N. & Budzik, M. K. (2023). Micromechanics of architected interfaces. 73. Abstract from International Conference on Adhesive Bonding 2023, Porto, Portugal.

Bazmohammadi, N., Madary, A., Quintero, J. C. V., Bazmohammadi, H., Khan, B., Wu, Y. & Guerrero, J. M. (2022). Microgrid Digital Twins: Concepts, Applications, and Future Trends. IEEE Access, 10, 2284-2302. https://doi.org/10.1109/ACCESS.2021.3138990

Tørring, P. & Vestergaard, J. B. (2024). Metanol i Fiskeriet: Milepælsrapport . Aquamind A/S.

Tabassian, R., Rajabi-Abhari, A., Mahato, M., Yoo, H., Yoon, H. Y., Park, J. Y. & Oh, I. K. (2024). Metal-organic framework-based nanofibrous film for two different modes of triboelectric nanogenerators. SmartMat, 5(5), Article e1270. https://doi.org/10.1002/smm2.1270

Alameen, E. H. O., Lucantonio, A. & DeSimone, A. (2023). Mechanics and transient morphing of soft hygroscopic bilayers. Mechanics Research Communications, 131, Article 104131. https://doi.org/10.1016/j.mechrescom.2023.104131

Budzik, M. K., Fulco , S. & Turner, K. (2022). Materials with architected plasticity and decoupled strength and toughness. Abstract from The 11th European Solid Mechanics , Galway, Ireland.

Binedell, T., Gupta, U., Sithanathan, B., Karupppasamy, S. & Blessing, L. (2023). Mapping lines of non-extension in persons with lower limb amputation to aid comfort-driven prosthetic socket design. Medical Engineering & Physics, 118, Article 104018. https://doi.org/10.1016/j.medengphy.2023.104018

Displaying results 151 to 200 out of 521

Revised 22.02.2024

AU Engineering