Find

For students
For PhDs
For employees

Department of Mechanical and Production Engineering

Publications

Below you can find a complete list of the publications that are written by employees at the Publications at Department of Mechanical and Production Engineering for example journal articles, books, reports etc.

Publication list

Sort by: Date | Author | Title

Zehtabiyan-Rezaie, N., Perto Justsen, J. & Abkar, M. (2024). Wind-farm power prediction using a turbulence-optimized Gaussian wake model. Wind Energy and Engineering Research, 2, Article 100007. https://doi.org/10.1016/j.weer.2024.100007

Yee, A. Z. H., Kwok, B., Ng, J., Loy, G. P., Ng, L. Y., Sng, J. R. H., Perrault, S., Lim, K. H. & Subburaj, K. (2025). Why Older Adults Integrate Digital Health Technology Into Their Everyday Lives: The Role of Basic Psychological Needs. Human Behavior and Emerging Technologies, 2025(1), Article 9711661. https://doi.org/10.1155/hbe2/9711661

Brandt, A., Brincker, R. & Ahlin, K. (2006). Welch's Method for PSD Estimation - Revisited. In Proceedings of International Operational Modal Analysis Conference

Hansen, C., Yang, X. I. A. & Abkar, M. (2026). Wall-modeled large-eddy simulation of turbulent smooth body separation using the OpenFOAM flow solver. Journal of Fluids Engineering, Transactions of the ASME, Article 011502.

Speakman, G. A., Abkar, M., A. Martínez-Tossas, L. & Bastankhah, M. (2021). Wake steering of multirotor wind turbines. Wind Energy, 24(11), 1294-1314. https://doi.org/10.1002/we.2633

Vernica, T., Glišić, M., Veluri, B. & Ramanujan, D. (2023). Volumetric mapping and visualization of life cycle assessment results on computer-aided design models. Journal of Cleaner Production, 418, Article 138035. https://doi.org/10.1016/j.jclepro.2023.138035

Victoria, M., Pullens, J. W. M., Torma, G., Lindhardt, M. K. K., Niazi, K. A. K., Jahangirlou, M. R., El Khoury, Y. V., Aschemann-Witzel, J., Ottosen, C. O. & Jørgensen, U. (2025). Vertical agrivoltaics in a temperate climate: Exploring technical, agricultural, meteorological, and social dimensions. Energy Nexus, 19, Article 100526. https://doi.org/10.1016/j.nexus.2025.100526

Zhou, Z., Yang, X. & Zhang, X. (2025). Variable impedance control on contact-rich manipulation of a collaborative industrial mobile manipulator: An imitation learning approach. Robotics and Computer-Integrated Manufacturing, 92, Article 102896. https://doi.org/10.1016/j.rcim.2024.102896

Rincón, M. J., Reclari, M., I. A. Yang, X. & Abkar, M. (2023). Validating the design optimisation of ultrasonic flow meters using computational fluid dynamics and surrogate modelling. International Journal of Heat and Fluid Flow, 100, Article 109112. https://doi.org/10.1016/j.ijheatfluidflow.2023.109112

Pedersen, T. T., Andersen, M. S., Victoria, M. & Bruun Andresen, G. (2023). Using Modeling All Alternatives to explore 55% decarbonization scenarios of the European electricity sector. iScience, 26(5), Article 106677. https://doi.org/10.1016/j.isci.2023.106677

Eheliyagoda, D., Veluri, B., Liu, G. & Ramanujan, D. (2025). Unveiling the multiregional circular economy pathways for global dysprosium constraints. Resources, Conservation and Recycling, 215, Article 108121. https://doi.org/10.1016/j.resconrec.2024.108121

Strack, D., Dieckmeyer, M., Sollmann , N., Kirschke , J. S. & Karupppasamy, S. (2025). Unexpectedly Higher Finite Element-Derived Strength in Fractured Vertebrae: Insights from a Retrospective Study. Abstract from Annual Meeting of the American Society of Bone and Mineral Research, Seattle, Washington, United States. https://doi.org/10.13140/RG.2.2.18868.72321

Feng, H., Gomes, C., Sandberg, M., Macedo, H. D. & Larsen, P. G. (2022). Under What Conditions Does a Digital Shadow Track a Periodic Linear Physical System? In A. Cerone, M. Autili, A. Bucaioni, C. Gomes, P. Graziani, M. Palmieri, M. Temperini & G. Venture (Eds.), Software Engineering and Formal Methods. SEFM 2021 Collocated Workshops - CIFMA, CoSim-CPS, OpenCERT, ASYDE, Revised Selected Papers (pp. 143-155). Springer. https://doi.org/10.1007/978-3-031-12429-7_11

Kaur, S., Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Understanding User Experience: Exploration of Various Definitions Using Natural Language Process. In A. Chakrabarti, V. Singh, P. S. Onkar & M. Shahid (Eds.), Responsible and Resilient Design for Society: Proceedings of ICoRD 2025 (Vol. 4, pp. 231-241). Springer. https://doi.org/10.1007/978-981-96-5495-6_18

Sandhu, K., Sarkar, P. & Karupppasamy, S. (2025). Understanding entrepreneurial thinking for designers: Perspectives from entrepreneurs, academicians, product designers, and students. Thinking Skills and Creativity, 56, Article 101728. https://doi.org/10.1016/j.tsc.2024.101728

Nielsen, S. M., Hougaard, H. A. & Balling, O. (2020). Uncertainty quantification with maximum entropy method for fatigue life estimation. In Volume 5: 24th Reliability, Stress Analysis, and Failure Prevention Conference (RSAFP) https://doi.org/10.1115/DETC2020-22728

van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2023). Ultra tough architected joints through single step bonding process with tunable properties. 205. Abstract from International Conference on Adhesive Bonding 2023, Porto, Portugal.

van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2024). Ultra tough architected joints through single manufacturing step. Abstract from 9th International Conference on Fracture of Polymers, Composites and Adhesives, Switzerland.

van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2024). Ultra-tough architected adhesive joints for integrated composite processing and bonding. Composites Part A: Applied Science and Manufacturing, 177, Article 107949. https://doi.org/10.1016/j.compositesa.2023.107949

Rincón, M. J., Reclari, M. & Abkar, M. (2022). Turbulent flow in small-diameter ultrasonic flow meters: A numerical and experimental study. Flow Measurement and Instrumentation, 87, Article 102227. https://doi.org/10.1016/j.flowmeasinst.2022.102227

Airao, J., Jain, A., Nirala, C. K. & Unune, D. (2025). Tribological performance in micro-milling of Ti6Al4V under nanofluid-based minimum quantity lubrication. International Journal on Interactive Design and Manufacturing, 19(3), 1807-1819. https://doi.org/10.1007/s12008-024-01856-5

Kristiansen, M. F., Rasmussen, S. & Mikkelsen, L. P. (2025). Transforming load-controlled fatigue test data into a strain-based SN-curve: Results for unidirectional non-crimp glass fiber/epoxy composites tested in tension-tension. IOP Conference Series: Materials Science and Engineering, 1338(1), Article 012018. https://doi.org/10.1088/1757-899X/1338/1/012018

Lu, H., Rui, X. & Zhang, X. (2023). Transfer matrix method for linear vibration analysis of flexible multibody systems. Journal of Sound and Vibration, 549, Article 117565. https://doi.org/10.1016/j.jsv.2023.117565

Zhang, Z., Sun, T., Wang, Z. & Zhang, X. (2024). Trajectory Planning and Performance Atlases of a New Omnidirectional Conveyor. Actuators, 13(11), Article 441. https://doi.org/10.3390/act13110441

Si, G., Zhou, F., Zhang, Z. & Zhang, X. (2022). Tracking Multiple Zebrafish Larvae Using YOLOv5 and DeepSORT. In 2022 8th International Conference on Automation, Robotics and Applications, ICARA 2022 (pp. 228-232). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICARA55094.2022.9738556

Eheliyagoda, D., Ramanujan, D., Veluri, B., Liu, Q. & Liu, G. (2023). Tracing the multiregional evolution of the global dysprosium demand-supply chain. Resources, Conservation & Recycling, 199, Article 107245. https://doi.org/10.1016/j.resconrec.2023.107245

Doll, U., Kapulla, R., Dues, M., Steinbock, J., Melnikov, S., Röhle, I., Migliorini, M. & K. Zachos, P. (2024). Towards Time-Resolved Multi-Property Measurements By Single-Frequency FRS. In 21th International Symposium on the Application of Laser and Imaging Techniques to Fluid Mechanics https://doi.org/10.55037/lxlaser.21st.19

Doll, U., Kapulla, R., Dues, M., Steinbock, J., Melnikov, S., Röhle, I., Migliorini, M. & K. Zachos, P. (2024). Towards time-resolved multi-property measurements by filtered Rayleigh scattering: diagnostic approach and verification. Experiments in Fluids, 65(1), Article 2. https://doi.org/10.1007/s00348-023-03740-6

Aher, G. R., Boudjadar, J. & Ramanujan, D. (2023). Towards Simulation-Based Circular Product Design. Procedia CIRP, 116, 690-695. https://doi.org/10.1016/j.procir.2023.02.116

Mirzaiee, R., Vernica, T., Scheuringer, K. & Bernstein, W. Z. (2022). Towards Retargetable Animations for Industrial Augmented Reality. In Proceedings - 2022 IEEE Conference on Virtual Reality and 3D User Interfaces Abstracts and Workshops, VRW 2022 (pp. 872-873). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/VRW55335.2022.00287

Yang, X. (2024). Towards Physical Interaction Control of Collaborative Industrial Robots Augmented with Scientific Machine Learning for SME Productions. [PhD thesis, Aarhus University]. Aarhus University.

Gad Kjeld, J., Avendaño-Valencia, L. D., Brandt, A., Christensen, S. S. & Karottki Falk Andersen, J. (2023). Towards minimal empirical uncertainty bounds of damping estimates of an offshore wind turbine in idling conditions. Mechanical Systems and Signal Processing, 191, Article 110180. https://doi.org/10.1016/j.ymssp.2023.110180

Foldager, F. F., Thule, C., Balling, O. & Larsen, P. G. (2021). Towards a Digital Twin - Modelling an Agricultural Vehicle. In T. Margaria & B. Steffen (Eds.), Leveraging Applications of Formal Methods, Verification and Validation: 9th International Symposium on Leveraging Applications of Formal Methods, ISoLA 2020, Rhodes, Greece, October 20–30, 2020, Proceedings, Part IV (pp. 109-123). Springer. https://doi.org/10.1007/978-3-030-83723-5_8

E.F. Athanasiadis, A., Duncan, O., Budzik, M. K. & Dias, M. A. (2025). Toughness of Confined Auxetic Foams. Advanced Engineering Materials, 27(17), Article 2500626. https://doi.org/10.1002/adem.202500626

Madsen, N. D., Steffensen, S., Jensen, H. M. & Bøttiger, J. (2015). Toughness measurement of thin films based on circumferential cracks induced at conical indentation. International Journal of Fracture, 193(2), 117-130. https://doi.org/10.1007/s10704-015-0022-5, https://doi.org/10.1007/s10704-015-0022-5

L.S. Hedvard, M., Dias, M. A. & Budzik, M. K. (2024). Toughening mechanisms and damage propagation in Architected-Interfaces. International Journal of Solids and Structures, 288, Article 112600. https://doi.org/10.1016/j.ijsolstr.2023.112600

Bokde, N., Hasan Ali, Z., Th. Al-Hadidi, M., Ahsan Farooque, A., Jamei, M., Abdulridha Al Maliki, A., Hamiye Beyaztas, B., Faris, H. & Mundher Yaseen, Z. (2021). Total Dissolved Salt Prediction Using Neurocomputing Models: Case Study of Gypsum Soil Within Iraq Region. IEEE Access, 9, 53617 - 53635. Article 9395118. https://doi.org/10.1109/ACCESS.2021.3071015

Hejlskov Hansen, M., Vernica, T., Mansour, R. & Ramanujan, D. (2024). Three-Dimensional Visualization of Energy Consumption Data in Additive Manufacturing. In 44th Computers and Information in Engineering Conference (CIE): 44th Computers and Information in Engineering Conference (CIE) (Vol. 2A). Article V02AT02A046 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2024-143405

Heide-Jørgensen, S., Budzik, M. K. & Ibsen, C. H. (2022). Three-dimensional, multiscale homogenization for hybrid woven composites with fiber-matrix debonding. Composites Science and Technology, 218, Article 109204. https://doi.org/10.1016/j.compscitech.2021.109204

Skovsgaard, S. P. H. & Heide-Jørgensen, S. (2021). Three-dimensional mechanical behavior of composite with fibre-matrix delamination through homogenization of micro-structure. Composite Structures, 275, Article 114418. https://doi.org/10.1016/j.compstruct.2021.114418

Langthjem, M. A., Imura, M. & Yamaguchi, K. (2023). The unbalanced rotating cylinder partially filled with fluid; multiple scales analysis of a forced Korteweg–de Vries–Burgers equation. Journal of Engineering Mathematics, 140, Article 1. https://doi.org/10.1007/s10665-023-10259-6, https://doi.org/10.1007/s10665-023-10259-6

Ramanujan, D., Bernstein, W. Z., Diaz-Elsayed, N. & R. Haapala, K. (2023). The Role of Industry 4.0 Technologies in Manufacturing Sustainability Assessment. Journal of Manufacturing Science and Engineering, 145(1), Article 010801. https://doi.org/10.1115/1.4055661

Neumann, F., Zeyen, E., Victoria, M. & Brown, T. (2023). The potential role of a hydrogen network in Europe. Joule, 7(8), 1793-1817. https://doi.org/10.1016/j.joule.2023.06.016

Si, G., Sun, L., Zhang, Z. & Zhang, X. (2021). Theoretical thermal-mechanical modelling and experimental validation of a three-dimensional (3D) electrothermal microgripper with three fingers. Micromachines, 12(12), Article 1512. https://doi.org/10.3390/mi12121512

Si, G., Ding, M., Zhang, Z. & Zhang, X. (2022). Theoretical thermal-mechanical modelling and experimental validation of a novel 3D three-fingered electrothermal microgripper. Precision Engineering, 77, 205-219. https://doi.org/10.1016/j.precisioneng.2022.05.013

Lerchl, T., Strack, D., Allaire, B., Yee, E., Scott, R., Nispel, K., Moeller, H., Graf, R., Karupppasamy, S., Kirschke , J. S., Bouxsein, M. L. & Anderson, D. E. (2025). THE EFFECTS OF PREVALENT VERTEBRAL FRACTURES ON SPINAL BIOMECHANICS. Abstract from 20th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Barcelona, Spain. https://www.researchgate.net/publication/397941200_THE_EFFECTS_OF_PREVALENT_VERTEBRAL_FRACTURES_ON_SPINAL_BIOMECHANICS

Kozarcanin, S. & Bruun Andresen, G. (2021). The effect of increased coupling strength between electricity and heating systems in different climate scenarios for Europe. Energy and Climate Change, 2, Article 100039. https://doi.org/10.1016/j.egycc.2021.100039

Bernal, D. & Ulriksen, M. D. (2024). The Basis Pursuit as a Set Selector. In C. Rainieri, C. Gentile & M. Aenlle López (Eds.), Proceedings of the 10th International Operational Modal Analysis Conference (IOMAC 2024): Volume 2 (Vol. 2, pp. 357–363). Springer, Cham. https://doi.org/10.1007/978-3-031-61425-5_34

Budzik, M. K., Wolfahrt, M., Reis, P., Kozłowski, M., Sena-Cruz, J., Papadakis, L., Nasr Saleh, M., V. Machalicka, K., Teixeira de Freitas, S. & P. Vassilopoulos, A. (2022). Testing mechanical performance of adhesively bonded composite joints in engineering applications: an overview. The Journal of Adhesion, 98(14), 2133-2209. https://doi.org/10.1080/00218464.2021.1953479

Nissen Pedersen, L. A., Don, J., Melvad, C. & Rysgaard, S. (2025). Temperature string device (TSD): A new low-cost instrument for sea ice observations in remote areas. HardwareX, 23, Article e00668. https://doi.org/10.1016/j.ohx.2025.e00668

Displaying results 1 to 50 out of 521

1

Revised 22.02.2024

-

AU Engineering