Publications

Below you can find a complete list of the publications that are written by employees at the Publications at Department of Mechanical and Production Engineering for example journal articles, books, reports etc.

Publication list

Sort by: Date | Author | Title

Pedersen, T. T., Victoria, M., Rasmussen, M. G. & Bruun Andresen, G. (2021). Exploring flexibility of near-optimal solutions to highly renewable energy systems. Abstract from 48th IEEE Photovoltaic Specialists Conference (PVSC).

Pedersen, T. T., Victoria, M., Rasmussen, M. G. & Andresen, G. B. (2021). Exploring flexibility of near-optimal solutions to highly renewable energy systems. In 2021 IEEE 48th Photovoltaic Specialists Conference, PVSC 2021 (pp. 387-391). IEEE. https://doi.org/10.1109/PVSC43889.2021.9518745

Tapetado, P., Victoria, M., Greiner, M. & Usaola, J. (2021). Exploring backup requirements to complement wind, solar and hydro generation in a highly renewable Spanish power system. Energy Strategy Reviews, 38, Article 100729. https://doi.org/10.1016/j.esr.2021.100729

Wu, Z., Englyst, L. & Møller, C. (2025). Exploring adjustment mechanisms in the sales and operations planning process: an industrial case study. International Journal of Operations and Production Management, 45(11), 1937–1966. https://doi.org/10.1108/IJOPM-05-2024-0378

Fulco , S., Budzik, M. K. & Turner, K. (2022). Exploiting architected plasticity to enhance fracture toughness while maintaining strength. Abstract from 19th U.S. National Congress of Theoretical and Applied

Mechanics, Austin, Texas, United States. https://drive.google.com/file/d/1uyFLy4Pk62paHMze4hVJSe7VnknWq1hT/view

Jensen, J. S. K. & Aghababaei, R. (2023). Experimental investigation of three-body wear for rubber seals in abrasive slurry environment. Wear, 534-535, Article 205131. https://doi.org/10.1016/j.wear.2023.205131

Bricalli, R., Zehtabiyan-Rezaie, N., Doll, U., Olesen, T. R. & Abkar, M. (2025). Experimental investigation of gas-bubble formation due to supersaturation in a plate heat exchanger. In Proceedings of the ASME 2025 Fluids Engineering Division Summer Meeting. Volume 2: Multiphase Flows Applications; Fluids Applications; Microfluidics; Fluids Mechanics Fundamentals; Fluids Engineering Education Article V002T07A004 American Society of Mechanical Engineers(ASME). https://doi.org/10.1115/FEDSM2025-156356

Subasic, M., Ireland, A., Mansour, R., Enblom, P., Krakhmalev, P., Åsberg, M., Fazi, A., Gårdstam, J., Shipley, J., Waernqvist, P., Forssgren, B. & Efsing, P. (2024). Experimental investigation and numerical modelling of the cyclic plasticity and fatigue behavior of additively manufactured 316 L stainless steel. International Journal of Plasticity, 176, Article 103966. https://doi.org/10.1016/j.ijplas.2024.103966

Zhou, Z., Li, L., Wang, R. & Zhang, X. (2020). Experimental Eye-in-hand Calibration for Industrial Mobile Manipulators. In 2020 IEEE International Conference on Mechatronics and Automation, ICMA 2020 (pp. 582-587). Article 9233585 IEEE. https://doi.org/10.1109/ICMA49215.2020.9233585

Friis, S. J., Strøm Hansen, T., Olesen, C. G., Poulsen, M., Gregersen, H. & Nygaard, J. V. (2025). Experimental and numerical study of solid needle insertions into human stomach tissue. Journal of the Mechanical Behavior of Biomedical Materials, 162, Article 106832. https://doi.org/10.1016/j.jmbbm.2024.106832

Arumugam, V. K., Mantzaras, J., Gantenbein, A., Doll, U. & Schildhauer, T. (2024). Experimental and numerical investigation of high-pressure methane catalytic synthesis from H2 and CO2. Proceedings of the Combustion Institute, 40(1-4), Article 105206. https://doi.org/10.1016/j.proci.2024.105206

Filsoof, O. T., Yde, A., Bøttcher, P. & Zhang, X. (2020). Experimental Analysis of a Scaled-Down Vestas Four-Rotor Wind Turbine. Journal of Physics: Conference Series, 1618(3), Article 032005. https://doi.org/10.1088/1742-6596/1618/3/032005

Eheliyagoda, D., Veluri, B., Ramanujan, D. & Liu, G. (2023). Examining three decades of global dysprosium supply chain through a material flow analysis. In First IRTC conference: Raw materials for a sustainable future (pp. 20)

Formentini, G. & Ramanujan, D. (2023). EXAMINING THE ROLE AND FUTURE POTENTIAL OF DESIGN FOR DISASSEMBLY METHODS TO SUPPORT CIRCULAR PRODUCT DESIGN. Proceedings of the Design Society , 3, 1735 - 1744. https://doi.org/10.1017/pds.2023.174

Mikropoulos, E., Roelfsema, M., Chen, H. H., Staffell, I., Oreggioni, G., Hdidouan, D., Thellufsen, J. Z., Chang, M. A., Fragkos, P., Giannousakis, A., Chatterjee, S., Ürge-Vorsatz, D., Pfenninger, S., Pickering, B., Victoria, M., Brown, T. & van Vuuren, D. P. (2025). Examining pathways for a climate neutral Europe by 2050: A model comparison analysis including integrated assessment models and energy system models. Energy, 319, Article 134809. https://doi.org/10.1016/j.energy.2025.134809

Jensen, J. S. K., Esmizadeh, S., Lund, M., Juhl, J., Nemati, N. & Aghababaei, R. (2025). Evaluating the effect of particle roundness on three-body wear between polymers and metals. Wear, 570, Article 206000. https://doi.org/10.1016/j.wear.2025.206000

Bruun Andresen, G. (2023). Er solceller Danmarks fremtid?. Pictures, Video and sound recordings (digital), YouTube. https://www.youtube.com/watch?v=9XCDwV-rYQA

Langthjem, M. A. & Jensen, H. M. (2025). Erratum to: On matched asymptotic expansion solutions of a bucklewave propagation problem (ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, (2024), 104, 5, 10.1002/zamm.202300655). Zeitschrift fuer Angewandte Mathematik und Mechanik, 105(5), Article e70095. https://doi.org/10.1002/zamm.70095

Norouzikudiani, R., Lucantonio, A. & DeSimone, A. (2023). Equilibrium and transient response of photo-actuated Liquid Crystal Elastomer beams. Mechanics Research Communications, 131, Article 104126. https://doi.org/10.1016/j.mechrescom.2023.104126

Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Entrepreneurial thinking in engineering design education: a comparative study of cognitive paradigms with insights from industry and academia. Entrepreneurship Education. Advance online publication. https://doi.org/10.1007/s41959-025-00158-5

Palade, D., Møller, C. & Hansen, A. K. (2024). Enterprise Integration as a Driving Factor for Guiding Digitalization in a Manufacturing Small and Medium Enterprise. Complex Systems Informatics and Modeling Quarterly, 2024(39), 48-64. https://doi.org/10.7250/csimq.2024-39.03

Abu Shaid Sujon, M., Andriollo, T. & Islam, A. (2023). Enhancing vibration damping properties of MABS/VDT blends using SEBS‑g‑MAH as a compatibilizer. Journal of Polymer Research, 30(12), Article 440. https://doi.org/10.1007/s10965-023-03819-y

Fulco , S., Budzik, M. K. & T. Turner , K. T. (2024). Enhancing toughness through geometric control of the process zone. Journal of the Mechanics and Physics of Solids, 184, Article 105548. https://doi.org/10.1016/j.jmps.2024.105548

Islam, R., Madsen, S. P. & Christensen, M. (2025). Enhancing magnetocrystalline anisotropy in W-type SrFe₁₈O₂₇ hexaferrite via tailored substitutions. Acta Materialia, 288, 120828. Article 120828. https://doi.org/10.1016/j.actamat.2025.120828

Berntsen, J., Brandt, A. & Gryllias, K. (2022). Enhanced demodulation band selection based on Operational Modal Analysis (OMA) for bearing diagnostics. Mechanical Systems and Signal Processing, 181, Article 109300. https://doi.org/10.1016/j.ymssp.2022.109300

Gøtske, E. K. (2024). Energy storage and climate impacts on the future renewable European energy system. [PhD thesis, Aarhus University]. Aarhus University.

Bazmohammadi, N., Madary, A., Bazmohmmadi, S., Quintero, J. C. V. & Guerrero, J. M. (2024). Energy Management of a Zero-Emission Hybrid FC/Battery/Ultracapacitor Ship Using Model Predictive Control. Abstract from The International Conference on Modeling and Simulation of Electric Machines, Converters and Systems (Electrimacs 2024).

Andersen, J. M. (2022). Energy efficient grain drying processes. 30-31. Abstract from Advances and Innovations in Agricultural Engineering., Herning, Denmark.

Kalweit, S., Zeyen, E. & Victoria, M. (2025). Endogenous transformation of land transport in Europe for different climate targets. Energy Conversion and Management, 344, Article 120203. https://doi.org/10.1016/j.enconman.2025.120203

Zeyen, E., Victoria, M. & Brown, T. (2023). Endogenous learning for green hydrogen in a sector-coupled energy model for Europe. Nature Communications, 14(1), Article 3743. https://doi.org/10.1038/s41467-023-39397-2

Si, G., Zhang, H., Zhang, Z. & Zhang, X. (2024). Enabling intuitive and effective micromanipulation: A wearable exoskeleton-integrated macro-to-micro teleoperation system with a 3D electrothermal microgripper. Robotics and Autonomous Systems, 181, Article 104776. https://doi.org/10.1016/j.robot.2024.104776

Dahl, M. B., Ulriksen, M. D. & Nielsen, M. E. (2023). Eigenvector assignment for damage localization with invariant eigenvalues. In 10th ECCOMAS Thematic Conference on Smart Structures and Materials. Eccomas Proceedia. https://doi.org/10.7712/150123.9861.450498

Tcherniak, D., Talasila, P., Ulriksen, M. D., Abbiati, G., Mahato, S. & Jensen, A. M. D. (2025). Efficient system identification, model updating, and virtual sensing in the Digital-Twin-as-a-Service software platform. In M. Dohler, A. Melot & M. A. Lopez (Eds.), Proceedings of the 11th International Operational Modal Analysis Conference, IOMAC 2025 (pp. 271-279). International Operational Modal Analysis Conference (IOMAC). https://iomac2025.sciencesconf.org/596439/document

Hund, J., Kouznetsova, V. & Andriollo, T. (2025). Efficient prediction of strength and strain localisation in porous solids via microstructure-based limit analysis. Mechanics of Materials, 201, Article 105208. https://doi.org/10.1016/j.mechmat.2024.105208

Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Efficient continuum-based modelling and analysis of polymer SLS: Insights into particle sintering and densification in straight and corner scanning passes. Additive Manufacturing, 109, Article 104828. https://doi.org/10.1016/j.addma.2025.104828

Malekan, M., Ilvig, C. F. & Aghababaei, R. (2024). Effects of Edge Radius and Coating Thickness on the Cutting Performance of AlCrN-Coated Tool. International Journal of Precision Engineering and Manufacturing, 25(10), 2059-2075. https://doi.org/10.1007/s12541-024-01074-9

Movassagh-Alanagh, F., Abdollah-Zadeh, A. & Aghababaei, R. (2025). Effects of B and C elements on microstructure, mechanical and tribological properties of TiN coating deposited by PACVD. Materials Characterization, 225, Article 115178. https://doi.org/10.1016/j.matchar.2025.115178

Faldella, F., Kim, T., Doll, U. & Jansohn, P. (2024). Effect of pressure and H₂ content on global consumption-based turbulent flame speed at gas turbine relevant conditions. International Journal of Hydrogen Energy, 81, 842-851. https://doi.org/10.1016/j.ijhydene.2024.07.282

Erenchun, A., Blanco, B., Gil-Negrete, N., Wang, B. & Kari, L. (2022). Effect of lubrication on the mechanical behavior of magnetorheological elastomers in compression mode. Polymer Testing, 111, Article 107617. https://doi.org/10.1016/j.polymertesting.2022.107617

Zhu, J., Xiao, J., Zhou, Q. & Aghababaei, R. (2024). Effect of grain boundary on scratch behavior of polycrystalline copper. International Journal of Mechanical Sciences, 272, Article 109175. https://doi.org/10.1016/j.ijmecsci.2024.109175

Airao, J., Malekan, M., Budzik, M. & Aghababaei, R. (2024). Effect of Friction on Critical Cutting Depth for Ductile-Brittle Transition in Material Removal Mechanism. Journal of Tribology, 146(11), Article 114201 EN. https://doi.org/10.1115/1.4066052

Budzik, M. K., Lopes Fernandes, R., Teixeira de Freitas, S., Heide-Jørgensen, S. & Jumel, J. (2021). Effect of adhesive thickness on joint performance during mode I fracture testing. Abstract from 6TH INTERNATIONAL CONFERENCE ON ADHESIVE BONDING 2021, Porto, Portugal.

Haase, L. M., Mugge, R., Jaeger-Erben, M., Nhu Laursen, L., Niinimäki , K., Richter, J., Sprecher, B. & Watkins, M. (2026). Editorial: Product lifetimes and the environment: Retaining product value in a circular economy. Resources, Conservation & Recycling, 225(108617), Article 108617. https://doi.org/10.1016/j.resconrec.2025.108617

Sivebaek, I. M., Aghababaei, R. & Espallargas, N. (2024). Editorial: Selected papers from NORDTRIB 2022. Wear, 544-545, Article 205183. https://doi.org/10.1016/j.wear.2023.205183

Pimentel de Figueiredo, R., Limberg, C., Jamone, L. & Bernardino, A. (2025). Editorial: Computer vision mechanisms for resource-constrained robotics applications. Frontiers in Robotics and AI, 12, Article 1680098. https://doi.org/10.3389/frobt.2025.1680098

Fristed, F., Tønning, S., Xie, Z., Langer, L. & Bruun Andresen, G. (2025). Early cross-sector decarbonisation for Europe's hard-to-abate sectors: Insights from Denmark's 2030 target. Applied Energy, 401(Part A), Article 126568. https://doi.org/10.1016/j.apenergy.2025.126568

Helal, I. B. I., Du, Y., Wang, H. & Zhang, X. (2024). Dynamic Modelling of a Continuum Robot Arm with Five 3-DoF Segments. In X. Rui & C. Liu (Eds.), Proceedings of the 2nd International Conference on Mechanical Systems (pp. 477-493). Springer. https://doi.org/10.1007/978-981-99-8048-2_30

Yang, X., Qiang, D., Chen, Z., Wang, H., Zhou, Z. & Zhang, X. (2022). Dynamic Modeling and Digital Twin of a Harmonic Drive Based Collaborative Robot Joint. In 2022 IEEE International Conference on Robotics and Automation, ICRA 2022 (pp. 4862-4868). IEEE. https://doi.org/10.1109/ICRA46639.2022.9812458

Bruun Andresen, G. (2023). Dunkelflaute: Der, hvor solen ikke skinner. - KlimaFokus. Pictures, Video and sound recordings (digital), Klimakysset. https://www.klimakysset.dk/klimafokus-stil-skarpt-paa-klimaet/groen-energi-fysik/

Salavatidezfouli, S., Karstoft, H., Iosifidis, A. & Abkar, M. (2025). Dual guidance: Reduced-order model-informed field reconstruction with generative models. Physics of Fluids, 37(9), Article 093617. https://doi.org/10.1063/5.0285462

Displaying results 301 to 350 out of 524

Revised 22.02.2024

AU Engineering