Publications

Below you can find a complete list of the publications that are written by employees at the Publications at Department of Mechanical and Production Engineering for example journal articles, books, reports etc.

Publication list

Sort by: Date | Author | Title

Schwenk-Nebbe, L. J., Victoria, M. & Bruun Andresen, G. (2021). Dataset: A proxy for historical CO2 emissions related to centralised electricity generation in Europe. Data in Brief, 36, Article 107016. https://doi.org/10.1016/j.dib.2021.107016

Li, X., Cheng, Y., Møller, C. & Lee, J. (2025). Data issues in industrial AI systems: A meta-review and research strategy. Computers in Industry, 173, Article 104361. https://doi.org/10.1016/j.compind.2025.104361

Li, X., Cheng, Y. & Møller, C. (2026). Data governance in operations and supply chain: a literature review. Industrial Management and Data Systems, 1-29. Advance online publication. https://doi.org/10.1108/IMDS-05-2025-0650

Airao, J., Fattahi, S., Truong, T. T., Alinaghizadeh, A., Azarhoushang, B., Karras, P. & Aghababaei, R. (2026). Data driven tool wear and remaining useful tool life estimation. Wear, 600, Article 206808. https://doi.org/10.1016/j.wear.2026.206808

Amarloo, A., Cinnella, P., Iosifidis, A., Forooghi, P. & Abkar, M. (2023). Data-driven Reynolds stress models based on the frozen treatment of Reynolds stress tensor and Reynolds force vector. Physics of Fluids, 35(7), Article 075154. https://doi.org/10.1063/5.0160977

Amarloo, A. (2024). Data-Driven RANS Modelling and Prediction of Turbulent Flows. [PhD dissertation, Aarhus University]. Aarhus Universitet.

Eidi, A., Zehtabiyan-Rezaie, N., Chiassi, R., Yang, X. I. A. & Abkar, M. (2022). Data-driven quantification of model-form uncertainty in Reynolds-averaged simulations of wind farms. Physics of Fluids, 34(8), Article 085135. https://doi.org/10.1063/5.0100076

Truong, T. T., Airao, J., Hojati, F., Ilvig, C. F., Azarhoushang, B., Karras, P. & Aghababaei, R. (2024). Data-driven prediction of tool wear using Bayesian regularized artificial neural networks. Measurement: Journal of the International Measurement Confederation, 238, Article 115303. https://doi.org/10.1016/j.measurement.2024.115303

Böttjer, T., Ørnskov Rønsch, G., Gonçalves Gomes, C. Â., Ramanujan, D., Iosifidis, A. & Larsen, P. G. (2021). Data-Driven Identification of Remaining Useful Life for Plastic Injection Moulds. In A.-L. Andersen, R. Andersen, D. Brunoe, M. Stoettrup Schioenning Larsen, K. Nielsen, A. Napoleone & S. Kjeldgaard (Eds.), Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems: Proceedings of the Changeable, Agile, Reconﬁgurable and Virtual Production Conference and the World Mass Customization & Personalization Conference (pp. 431-439). Springer. https://www.springerprofessional.de/en/data-driven-identification-of-remaining-useful-life-for-plastic-/19816878

Böttjer, T., Ørnskov Rønsch, G., Gomes, C., Ramanujan, D., Iosifidis, A. & Larsen, P. G. (2022). Data-Driven Identification of Remaining Useful Life for Plastic Injection Moulds. In A.-L. Andersen, R. Andersen, T. D. Brunoe, M. Stoettrup Schioenning Larsen, K. Nielsen, A. Napoleone & S. Kjeldgaard (Eds.), Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems - Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference CARV 2021 and 10th World Mass Customization and Personalization Conference MCPC 2021 (pp. 431-439). Springer. https://doi.org/10.1007/978-3-030-90700-6_49

Salavati, S., Hansen, C., Karstoft, H., Iosifidis, A. & Abkar, M. (2027). Data-driven generative digital twins for wind-farm flows from highly sparse measurements. Expert Systems with Applications, 333(Part B), Article 133815. https://doi.org/10.1016/j.eswa.2026.133815

Zehtabiyan-Rezaie, N., Iosifidis, A. & Abkar, M. (2022). Data-driven fluid mechanics of wind farms: A review. Journal of Renewable and Sustainable Energy, 14(3), Article 032703. https://doi.org/10.1063/5.0091980

Martiny, T., Mansour, R. & Ramanujan, D. (2026). Data-Driven Energy Consumption Modeling of Injection Molding Machine Modules. In H. Kohl, G. Seliger, F. Dietrich & G. Campana (Eds.), Safe and Sustainable Value Creation by Design - Proceedings of the 21st Global Conference on Sustainable Manufacturing GCSM 2025 (pp. 563-571). Springer Science+Business Media. https://doi.org/10.1007/978-3-032-21157-6_62

Hansen, C., I. A. Yang, X. & Abkar, M. (2023). Data-Driven Dynamical System Models of Roughness-Induced Secondary Flows in Thermally Stratified Turbulent Boundary Layers. Journal of Fluids Engineering, Transactions of the ASME, 145(6), Article FE-22-1510. https://doi.org/10.1115/1.4057016

Hansen, C., I. A. Yang, X. & Abkar, M. (2022). Data-Driven Dynamical System Models of Roughness-Induced Secondary Flows in Thermally Stratified Boundary Layers. In Proceedings of the ASME 2022 Fluids Engineering Division Summer Meeting : Volume 2: Multiphase Flow (MFTC); Computational Fluid Dynamics (CFDTC); Micro and Nano Fluid Dynamics (MNFDTC) Article FEDSM2022-87630, V002T05A023 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/FEDSM2022-87630

Dalpke, S., Yang, J., Forooghi, P., Frohnapfel, B. & Stroh, A. (2026). Data-driven correlations for thermohydraulic roughness properties. European Journal of Mechanics, B/Fluids, 115, Article 204355. https://doi.org/10.1016/j.euromechflu.2025.204355

Dias, M. A., E.F. Athanasiadis, A., N. Fernando, D. & Budzik, M. K. (2024). Damage propagation in Architected-Interfaces. 1. Abstract from American Physical Society March Meeting 2024, Minneapolis , Minnesota, United States. https://meetings.aps.org/Meeting/MAR24/Session/Q35.10

Malekan, M., Bloch-Jensen, C. D., Zolbin, M. A., Ørskov, K. B., Jensen, H. M. & Aghababaei, R. (2021). Cutting edge wear in high-speed stainless steel end milling. International Journal of Advanced Manufacturing Technology, 114(9-10), 2911-2928. https://doi.org/10.1007/s00170-021-07006-5

Aghababaei, R., Malekan, M. & Budzik, M. (2021). Cutting Depth Dictates the Transition from Continuous to Segmented Chip Formation. Physical Review Letters, 127(23), Article A202. https://doi.org/10.1103/PhysRevLett.127.235502

Strack, D., Rehtanz, N., Soltani, Z., Alkalay, R. N. & Karupppasamy, S. (2026). CT-Based Finite Element Strength of Metastatic Vertebrae: Influence of Material Discretization on Predictions. Abstract from 9th Danish Bone Research Workshop, Sønderborg, Denmark.

Li, J., Zhou, X., Brochu, M., Chekir, N., Sixsmith, J. J. & Zhao, Y. F. (2025). Crystal introducing mechanism in laser wire directed energy deposition fabricated Ti6Al4V. Progress in Additive Manufacturing, 10(2), 1231-1241. https://doi.org/10.1007/s40964-024-00701-1

Strack, D. (2026). Cracking bones and beyond, finite element simulation to assess fracture risk of vertebral bones. Abstract from 20th DCAMM Internal Symposium, Viborg, Denmark.

Hund, J., Cuenca, N. & Andriollo, T. (2026). Crack detection by holomorphic neural networks and transfer-learning-enhanced genetic optimization. Engineering Fracture Mechanics, 338, Article 112050. https://doi.org/10.1016/j.engfracmech.2026.112050

Zhou, Z., Yang, X., Wang, H. & Zhang, X. (2022). Coupled dynamic modeling and experimental validation of a collaborative industrial mobile manipulator with human-robot interaction. Mechanism and Machine Theory, 176, Article 105025. https://doi.org/10.1016/j.mechmachtheory.2022.105025

Fernandes, R., Greiner, M. & Victoria, M. (2026). Country-specific CO₂ management drives EU carbon neutrality with minimal system cost increases. One Earth, 9(1), Article 101593. https://doi.org/10.1016/j.oneear.2025.101593

Volk, M., Yuksel, O., Baran, I., Hattel, J. H., Spangenberg, J. & Sandberg, M. (2022). Cost-efficient, automated, and sustainable composite profile manufacture: A review of the state of the art, innovations, and future of pultrusion technologies. Composites Part B: Engineering, 246, Article 110135. https://doi.org/10.1016/j.compositesb.2022.110135

Zinck Thellufsen, J., Lund, H., Vad Mathiesen, B., Østergaard, P. A., Sorknæs, P., Nielsen, S., Thøis Madsen, P. & Bruun Andresen, G. (2024). Cost and systems effects of nuclear power in carbon-neutral energy systems. Applied Energy, 371, Article 123705. https://doi.org/10.1016/j.apenergy.2024.123705

Gøtske, E. K., Bruun Andresen, G. & Victoria, M. (2023). Cost and Efficiency Requirements for Successful Electricity Storage in a Highly Renewable European Energy System. PRX Energy, 2(2), Article 023006. https://doi.org/10.1103/PRXEnergy.2.023006

Farah, S., Bokde, N. & Andresen, G. B. (2024). Cost and CO₂ emissions co-optimisation of green hydrogen production in a grid-connected renewable energy system. International Journal of Hydrogen Energy, 84, 164-176. https://doi.org/10.1016/j.ijhydene.2024.08.062

Teixeira de Freitas, S., Roos, L., Papadakis, L., Sena-Cruz, J. & Budzik, M. K. (2022, Feb). COST Action CA18120: Reliable roadmap for certification of bonded primary structures APPLICATION FOR COST GRANTS. EU. https://certbond.eu/wp-content/uploads/Certbond-Guidelines_COST-Grants_v20221114.pdf

Legaard, C. M., Schranz, T., Schweiger, G., Drgona, J., Falay, B., Gomes, C., Iosifidis, A., Abkar, M. & Larsen, P. G. (2023). Constructing Neural Network Based Models for Simulating Dynamical Systems. ACM Computing Surveys, 55(11), 1-34. Article 236. https://doi.org/10.1145/3567591

Li, W., Wu, S., Zhu, J., Zhang, L., Zheng, J., Wang, H., Qiu, Y., Xie, G. & Li, C. (2025). Constitutive modelling of time-dependent polymer matrix composites: Incorporating a visco-hyperelastic model into the micromechanical framework. Composite Structures, 366, Article 119220. https://doi.org/10.1016/j.compstruct.2025.119220

Budzik, M. K., Athanasiadis, A. & Dias, M. A. (2021). Confined mechanical metamaterials under fracture loading. Abstract from 6TH INTERNATIONAL CONFERENCE ON ADHESIVE BONDING 2021, Porto, Portugal.

Yang, X. I. A., Zhang, W., Abkar, M. & Anderson, W. (2024). Computational fluid dynamics: Its carbon footprint and role in carbon reduction. Journal of Renewable and Sustainable Energy, 16(5), Article 055906. https://doi.org/10.1063/5.0217320

Matsuura, K., Mukai, K. & Langthjem, M. A. (2023). Computational and Experimental Study on the Mechanism of Ring Tone. International Journal of Computational Methods and Experimental Measurements, 11(1), 9-16. https://doi.org/10.18280/ijcmem.110102

Matsuura, K., Mukai, K. & Langthjem, M. A. (2021). Computational and experimental study on ring tone. In S. Hernández & A. Coruña (Eds.), Advances in Fluid Dynamics with emphasis on Multiphase and Complex Flow (pp. 141-151). WIT Press. https://doi.org/10.2495/MPF210121

Ferguson, O. V., Skovsgaard, S. P. H., Jensen, H. M. & Mikkelsen, L. P. (2023). Compressive strength prediction of carbon fiber-reinforced pultruded profiles including realistic volumetric fiber orientations. European Journal of Mechanics A - Solids, 104( Supplement), Article 105011. https://doi.org/10.1016/j.euromechsol.2023.105011

van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2022). Composite joint toughening by multiscale architecturing through integrated manufacturing. Abstract from The 11th European Solid Mechanics , Galway, Ireland. file:///C:/Users/au564491/Downloads/vanInnis_esmc2022%20(1).pdf

Si, G., Chen, F. & Zhang, X. (2022). Comparison of the Dynamic Performance of Planar 3-DOF Parallel Manipulators. Machines, 10(4), Article 233. https://doi.org/10.3390/machines10040233

Khanna, N., Patel, D., Raval, P., Airao, J., Badheka, V. & Rahman Rashid, R. A. (2024). Comparison of sustainable cooling/lubrication strategies for drilling of wire arc additively manufactured Inconel 625. Tribology International, 200, Article 110068. https://doi.org/10.1016/j.triboint.2024.110068

Bibbo, N., Arora, V. & Pedersen, M. M. (2021). Comparison of Findley and MWCM multiaxial fatigue methods using the notch stress method on welded joints. In Procedia Structural Integrity (Vol. 31, pp. 75-79). Elsevier. https://doi.org/10.1016/j.prostr.2021.03.012

Barettin, D., Madsen, S., Lassen, B. & Willatzen, M. (2011). Comparison of Atomistic and Continuum Quantum-Dot Elastic Models and Implications for Optoelectronic Properties. AIP Conference Proceedings, 1399, 445.

Vallerotto, G., Victoria, M., Jost, N., Askins, S., Dominguez, C., Herrero, R. & Anton, I. (2021). Comparison of achromatic doublet on glass Fresnel lenses for concentrator photovoltaics. Optics Express, 29(13), 20601-20616. https://doi.org/10.1364/OE.428160

Niazi, K. A. K. & Victoria, M. (2023). Comparative analysis of photovoltaic configurations for agrivoltaic systems in Europe. Progress in Photovoltaics, 31(11), 1101-1113. https://doi.org/10.1002/pip.3727

Carlson, D. F., Akbulut, S., Rasmussen, J. F., Hestbech, C. S., Andersen, M. H. & Melvad, C. (2023). Compact and modular autonomous surface vehicle for water research: The Naval Operating Research Drone Assessing Climate Change (NORDACC). HardwareX, 15, Article e00453. https://doi.org/10.1016/j.ohx.2023.e00453

Kabachi, M. A., Sandberg, M. & Ermanni, P. (2025). Combined experimental–numerical approach for through-thickness unsaturated permeability characterization of deformable fiber-beds. Composite Structures, 371, Article 119396. https://doi.org/10.1016/j.compstruct.2025.119396

Yang, X., Zhou, Z., Li, L. & Zhang, X. (2023). Collaborative robot dynamics with physical human–robot interaction and parameter identification with PINN. Mechanism and Machine Theory, 189, Article 105439. https://doi.org/10.1016/j.mechmachtheory.2023.105439

Torma, G., Peschel, A. O., Krogsgaard-Jensen, N. M., Niazi, K. A. K., Victoria, M. & Aschemann-Witzel, J. (2026). Cognitive and affective reasoning about agrivoltaics: The influence of experiential engagement on perceived purpose and acceptance intentions. Environmental Science and Policy, 183, Article 104472. https://doi.org/10.1016/j.envsci.2026.104472

Ulriksen, M. D., Jepsen, M. & Bernal, D. (2023). Closed-loop load vectors for structural damage localization. Mechanical Systems and Signal Processing, 196, Article 110321. https://doi.org/10.1016/j.ymssp.2023.110321

Huulgaard, R. D., Mosgaard, M. A., Bundgaard, A. M., Nors, B., Nielsen, S. & Haase, L. M. (2026). Circular Public Procurement of Textiles – A Roadmap. In CEIC proceedings ( Circular Economy - Interdisciplinary Conference 2026)

Displaying results 451 to 500 out of 615

Revised 22.02.2024

AU Engineering