Haase, L. M., Mugge, R., Jaeger-Erben, M., Nhu Laursen, L., Niinimäki , K., Richter, J., Sprecher, B. & Watkins, M. (2026).
Editorial: Product lifetimes and the environment: Retaining product value in a circular economy.
Resources, Conservation & Recycling,
225(108617), Artikel 108617.
https://doi.org/10.1016/j.resconrec.2025.108617
Migliorini, M.
, Doll, U., Lawson, N. J., Melnikov, S. M., Steinbock, J., Dues, M., Zachos, P. K., Röhle, I. & MacManus, D. G. (2025).
Advancements on the use of Filtered Rayleigh Scattering (FRS) with Machine learning methods for flow distortion in Aero-Engine intakes.
Experimental Thermal and Fluid Science,
160, 111325. Artikel 111325.
https://doi.org/10.1016/j.expthermflusci.2024.111325Qian, F., Ding, H., Liu, T., Wu, Z.
, Zhang, X. & Iqbal, A. (2025).
An adaptive active vibration control for flexible beam systems under unknown deterministic disturbances.
Mechanical Systems and Signal Processing,
228, Artikel 112447.
https://doi.org/10.1016/j.ymssp.2025.112447Formentini, G., Prioli, J. PJ., Ko, J., Hapuwatte, B., Ferrero, V., Badurdeen, F., Rickli, J. L.
& Ramanujan, D. (2025).
A review of disassembly systems for circular product design.
Journal of Cleaner Production,
506, Artikel 145459.
https://doi.org/10.1016/j.jclepro.2025.145459
Durocher, H., Bachmann, C., Mozzillo, R., Janeschitz, G.
& Zhang, X. (2025).
A Spatial Five-Bar Linkage as a Tilting Joint of the Breeding Blanket Transporter for the Remote Maintenance of EU DEMO.
Machines,
13(5), Artikel 371.
https://doi.org/10.3390/machines13050371
Darabi, R., Oliveira, J. P.
, Nemati, N., Reis, A. & de Sá, J. C. (2025).
Benchmarking advanced multiphase field modeling of Inconel 625 in additive manufacturing: Correlating powder bed fusion with dendrite growth and crack formation.
Materialia,
40, Artikel 102384.
https://doi.org/10.1016/j.mtla.2025.102384Yang, J., Stroh, A., Bagheri, S., Frohnapfel, B.
& Forooghi, P. (2025).
Characterization of hydrodynamic and thermal properties of anisotropic irregular roughness.
International Journal of Heat and Fluid Flow,
116, Artikel 109888.
https://doi.org/10.1016/j.ijheatfluidflow.2025.109888Li, W., Wu, S., Zhu, J.
, Zhang, L., Zheng, J., Wang, H., Qiu, Y., Xie, G. & Li, C. (2025).
Constitutive modelling of time-dependent polymer matrix composites: Incorporating a visco-hyperelastic model into the micromechanical framework.
Composite Structures,
366, Artikel 119220.
https://doi.org/10.1016/j.compstruct.2025.119220Li, J., Zhou, X., Brochu, M., Chekir, N., Sixsmith, J. J. & Zhao, Y. F. (2025).
Crystal introducing mechanism in laser wire directed energy deposition fabricated Ti6Al4V.
Progress in Additive Manufacturing,
10(2), 1231-1241.
https://doi.org/10.1007/s40964-024-00701-1
Cristóbal, A. B., Sanz-Cuadrado, C.
, Zhang, Z., Victoria, M., Fialho, L., Cavaco, A., Bokalič, M. & Narvarte, L. (2025).
Delving into the modeling and operation of energy communities as epicenters for systemic transformations.
Universal Access in the Information Society,
24(3), 2007-2023.
https://doi.org/10.1007/s10209-023-01056-0He, L., Wang, C., Zhang, M.
, Li, J., Chen, T. & Zhou, X. (2025).
Design of BCC/FCC dual-solid solution refractory high-entropy alloys through CALPHAD, machine learning and experimental methods.
npj Computational Materials,
11(1), Artikel 105.
https://doi.org/10.1038/s41524-025-01597-3Djeffal, S., Ghoul, A., Saadi, A., Izri, Z., Morakchi, M. R. & Wang, H. (2025).
Design optimization and simulation of a 3D printed cable-driven continuum robot using IKM-ANN and nTop software.
Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering,
239(2), 200-218.
https://doi.org/10.1177/09596518241276233Fulco, S.
, Budzik, M. K., Xiao, H., Durian, D. J. & Turner, K. T. (2025).
Disorder enhances the fracture toughness of 2D mechanical metamaterials.
PNAS Nexus,
4(2), Artikel pgaf023.
https://doi.org/10.1093/pnasnexus/pgaf023Fristed, F., Tønning, S.
, Xie, Z., Langer, L.
& Bruun Andresen, G. (2025).
Early cross-sector decarbonisation for Europe's hard-to-abate sectors: Insights from Denmark's 2030 target.
Applied Energy,
401(Part A), Artikel 126568.
https://doi.org/10.1016/j.apenergy.2025.126568Tcherniak, D.
, Talasila, P., Ulriksen, M. D., Abbiati, G., Mahato, S. & Jensen, A. M. D. (2025).
Efficient system identification, model updating, and virtual sensing in the Digital-Twin-as-a-Service software platform. I M. Dohler, A. Melot & M. A. Lopez (red.),
Proceedings of the 11th International Operational Modal Analysis Conference, IOMAC 2025 (s. 271-279). International Operational Modal Analysis Conference (IOMAC).
https://iomac2025.sciencesconf.org/596439/documentJensen, J. S. K., Esmizadeh, S., Lund, M., Juhl, J.
, Nemati, N. & Aghababaei, R. (2025).
Evaluating the effect of particle roundness on three-body wear between polymers and metals.
Wear,
570, Artikel 206000.
https://doi.org/10.1016/j.wear.2025.206000
Mikropoulos, E., Roelfsema, M., Chen, H. H., Staffell, I., Oreggioni, G., Hdidouan, D., Thellufsen, J. Z., Chang, M. A., Fragkos, P., Giannousakis, A., Chatterjee, S., Ürge-Vorsatz, D., Pfenninger, S., Pickering, B.
, Victoria, M., Brown, T. & van Vuuren, D. P. (2025).
Examining pathways for a climate neutral Europe by 2050: A model comparison analysis including integrated assessment models and energy system models.
Energy,
319, Artikel 134809.
https://doi.org/10.1016/j.energy.2025.134809Friis, S. J., Strøm Hansen, T.
, Olesen, C. G., Poulsen, M., Gregersen, H.
& Nygaard, J. V. (2025).
Experimental and numerical study of solid needle insertions into human stomach tissue.
Journal of the Mechanical Behavior of Biomedical Materials,
162, Artikel 106832.
https://doi.org/10.1016/j.jmbbm.2024.106832
