Find

Til studerende
Til ph.d.er
Til medarbejdere

Institut for Mekanik og Produktion

Publikationer

Her finder du en samlet liste over de publikationer, som er lavet af medarbejdere ved Institut for Mekanik og Produktion for eksempel tidsskriftsartikler, bøger, rapporter m.v.

Publikationsliste

Sortér efter: Dato | Forfatter | Titel

Si, G., Zhang, H., Zhang, Z. & Zhang, X. (2024). Enabling intuitive and effective micromanipulation: A wearable exoskeleton-integrated macro-to-micro teleoperation system with a 3D electrothermal microgripper. Robotics and Autonomous Systems, 181, Artikel 104776. https://doi.org/10.1016/j.robot.2024.104776

Bazmohammadi, N., Madary, A., Bazmohmmadi, S., Quintero, J. C. V. & Guerrero, J. M. (2024). Energy Management of a Zero-Emission Hybrid FC/Battery/Ultracapacitor Ship Using Model Predictive Control. Abstract fra The International Conference on Modeling and Simulation of Electric Machines, Converters and Systems (Electrimacs 2024).

Gøtske, E. K. (2024). Energy storage and climate impacts on the future renewable European energy system. Aarhus University.

Fulco , S., Budzik, M. K. & T. Turner , K. T. (2024). Enhancing toughness through geometric control of the process zone. Journal of the Mechanics and Physics of Solids, 184, Artikel 105548. https://doi.org/10.1016/j.jmps.2024.105548

Arumugam, V. K., Mantzaras, J., Gantenbein, A., Doll, U. & Schildhauer, T. (2024). Experimental and numerical investigation of high-pressure methane catalytic synthesis from H2 and CO2. Proceedings of the Combustion Institute, 40(1-4), Artikel 105206. https://doi.org/10.1016/j.proci.2024.105206

Subasic, M., Ireland, A., Mansour, R., Enblom, P., Krakhmalev, P., Åsberg, M., Fazi, A., Gårdstam, J., Shipley, J., Waernqvist, P., Forssgren, B. & Efsing, P. (2024). Experimental investigation and numerical modelling of the cyclic plasticity and fatigue behavior of additively manufactured 316 L stainless steel. International Journal of Plasticity, 176, Artikel 103966. https://doi.org/10.1016/j.ijplas.2024.103966

Ghasemi, A., Sadough Vanini, S. A., Alizadeh Zolbin, M. & Aghababaei, R. (2024). Exploring the influence of ultrasonic peening treatment at ambient and cryogenic conditions on the surface characteristics and fatigue life of austenitic stainless steel 304L. Surface and Coatings Technology, 494(Part 1 ), Artikel 131382. https://doi.org/10.1016/j.surfcoat.2024.131382

Islam, R., Madsen, S. P. & Christensen, M. (2024). Exploring the magnetic properties of W-type SrFe18O27 hexaferrite: Insights from a first-principles study. Physical Review B, 109(2), Artikel 024414. https://doi.org/10.1103/PhysRevB.109.024414

Hansen, C., Sørensen, J. N., I. A. Yang, X. & Abkar, M. (2024). Extension of the law of the wall exploiting weak similarity of velocity fluctuations in turbulent channels. Physics of Fluids, 36(1), Artikel 015134. https://doi.org/10.1063/5.0185334

Rygg Johnsen, A., Petersen, J. E., Pedersen, M. M. & Yildirim, H. C. (2024). Factors affecting the fatigue strength of additively manufactured Ti-6Al-4V parts. Welding in the World, 68(2), 361-409. https://doi.org/10.1007/s40194-023-01604-5

Bokharaie, B.-U., Aghababaei, R., Dias, M. A. & Budzik, M. K. (2024). Failure of 3D-printed composite continuous carbon fibre hexagonal frames. Composites Part B: Engineering, 275, Artikel 111307. https://doi.org/10.1016/j.compositesb.2024.111307

Subasic, M., Olsson, M., Dadbakhsh, S., Zhao, X., Krakhmale, P. & Mansour, R. (2024). Fatigue strength improvement of additively manufactured 316L stainless steel with high porosity through preloading. International Journal of Fatigue, 180, Artikel 108077. https://doi.org/10.1016/j.ijfatigue.2023.108077

Rincón, M. J., Caspersen, A., Thorenfeldt Ingwersen, N., Reclari, M. & Abkar, M. (2024). Flow investigation of two-stand ultrasonic flow meters in a wide dynamic range by numerical and experimental methods. Flow Measurement and Instrumentation, 96, Artikel 102543. https://doi.org/10.1016/j.flowmeasinst.2024.102543

Sahli, R., Mikkelsen, J., Boye, M. S., Dias, M. A. & Aghababaei, R. (2024). Frictional Contact of Soft Polymeric Shells. Physical Review Letters, 133(10), Artikel 106202. https://doi.org/10.1103/PhysRevLett.133.106202

Alvandifar, N., Kristofersson, J. & Forooghi, P. (2024). Frost formation non-uniformity in a multi-circuit V-shape evaporator. International Journal of Refrigeration, 157, 137-149. https://doi.org/10.1016/j.ijrefrig.2023.10.018

Nguyen, V. H., Oh, S., Mahato, M., Tabassian, R., Yoo, H., Lee, S. G., Garai, M., Kim, K. J. & Oh, I. K. (2024). Functionally antagonistic polyelectrolyte for electro-ionic soft actuator. Nature Communications, 15(1), Artikel 435. https://doi.org/10.1038/s41467-024-44719-z

Hu, P., Dias, M. A. & Budzik, M. K. (2024). Geometric tunability of interlaminar resistance. Composites Part B: Engineering, 287, Artikel 111839. https://doi.org/10.1016/j.compositesb.2024.111839

Farah, S. (2024). Green hydrogen production: cost and CO2 emissions co-optimisation. Poster session præsenteret på Aarhus Power-to-X Symposium 2024, Aarhus, Danmark.

I. A. Yang, X., Abkar, M. & I. Park, G. (2024). Grid Convergence Properties of Wall-Modeled Large Eddy Simulations in the Asymptotic Regime. Journal of Fluids Engineering, Transactions of the ASME, 146(8), Artikel 081501. https://doi.org/10.1115/1.4064850

I. A. Yang, X. & Abkar, M. (2024). Grid Convergence Properties of Wall-Modeled Large-Eddy Simulations in the Asymptotic Regime. I ASME 2023 International Mechanical Engineering Congress and Exposition: Fluids Engineering (Bind 9). Artikel IMECE2023-116581, V009T10A017 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/IMECE2023-116581

Almskou, T. (2024). Grundrids af teknisk tegning. (6. udgave udg.).

Lubineau, G., Alfano, M., Tao, R., Wagih, A., Yudhanto, A., Li, X., Almuhammadi, K., Hashem, M., Hu, P., Mahmoud, H. A. & Oz, F. (2024). Harnessing Extrinsic Dissipation to Enhance the Toughness of Composites and Composite Joints: A State-of-the-Art Review of Recent Advances. Advanced Materials, 36(51), Artikel 2407132. https://doi.org/10.1002/adma.202407132

singh, G., Mitra, T., Madsen, S. P. & Dantan, A. R. (2024). Highly reflective and high-Q thin resonant subwavelength gratings. Journal of Physics: Photonics, 6(4), Artikel 045009. https://doi.org/10.1088/2515-7647/ad70e7

Islam, R., Vero, K. & Borah, J. P. (2024). Historical overview and recent advances in permanent magnet materials. Materials Today Communications, 41, Artikel 110538. https://doi.org/10.1016/j.mtcomm.2024.110538

Strack, D., Mesbah, M., Manohar Rayudu, N., Baum, T., Kirschke , J. S. & Karupppasamy, S. (2024). IMPACT OF ANNULUS FIBROSUS STIFFNESS ON THE FRACTURE LOAD OF FUNCTIONAL SPINE UNITS. Orthopaedic Proceedings, 102. https://doi.org/10.1302/1358-992X.2024.18.102

Wang, C., Cong, D., Tang, G., Zhou, X. & Li, J. (2024). Improving thermoelectric properties in double half-Heusler M₈Fe_xNi_8−xSb₈ (M = TiZrHfNb)-InSb compounds via synergistic multiscale defects and high-mobility carrier injection. Chemical Engineering Journal, 496, Artikel 154313. https://doi.org/10.1016/j.cej.2024.154313

Ma, L., Nemati, N., Kim, D. E. & Aghababaei, R. (2024). Interface Amorphization Controls Maximum Wear Resistance of Multinanolayer DLC/WC Coatings. ACS Applied Materials and Interfaces, 16(14), 18090-18098. https://doi.org/10.1021/acsami.3c18218

Borbolla Muñoz, A., Nezar Aboujarra, M. & Ramanujan, D. (2024). Investigating Sustainable Production Planning of an Industrial Progressive Die Stamping Process Using Discrete Event Simulation. I 29th Design for Manufacturing and the Life Cycle Conference (DFMLC): 29th Design for Manufacturing and the Life Cycle Conference (DFMLC) (Bind 5). Artikel V005T05A006 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2024-143648

Jensen, J. S. K. (2024). Investigation of three-body abrasive sand wear in submersible pumps. Aarhus University.

Farah, S. & Bruun Andresen, G. (2024). Investment-based optimisation of energy storage design parameters in a grid-connected hybrid renewable energy system. Applied Energy, 355, Artikel 122384. https://doi.org/10.1016/j.apenergy.2023.122384

Ulriksen, M. D. & Bernal, D. (2024). Localization of earthquake-induced structural damage using output feedback eigenstructure assignment. I 18th World Conference on Earthquake Engineering (WCEE2024)

Tabassian, R., Rajabi-Abhari, A., Mahato, M., Yoo, H., Yoon, H. Y., Park, J. Y. & Oh, I. K. (2024). Metal-organic framework-based nanofibrous film for two different modes of triboelectric nanogenerators. SmartMat, 5(5), Artikel e1270. https://doi.org/10.1002/smm2.1270

Wieber, C., Jeppesen, M. R., Finster, K., Melvad, C. & Santl-Temkiv, T. (2024). Micro-PINGUIN: microtiter-plate-based instrument for ice nucleation detection in gallium with an infrared camera. Atmospheric Measurement Techniques, 17(9), 2707–2719. https://doi.org/10.5194/amt-17-2707-2024

Alamia, A. & Bruun Andresen, G. (2024). Modelling Alternatives for integrted PtX infrastrcture between Denmark and EU. Poster session præsenteret på 12th European Open Energy Modelling Workshop, Grenoble, Frankrig.

Abbiati, G., Gomes, C., Sandberg, M., Kazemi, Z., Hansen, S. T. & Larsen, P. G. (2024). Modelling for Digital Twins. I J. Fitzgerald, C. Gomes & P. G. Larsen (red.), The Engineering of Digital Twins (s. 89-127). Springer. https://doi.org/10.1007/978-3-031-66719-0_5

Ninno, F., Chiastra, C., Colombo, M., Dardik, A., Strosberg, D., Aboian, E., Tsui, J., Bartlett, M., Balabani, S. & Díaz-Zuccarini, V. (2024). Modelling lower-limb peripheral arterial disease using clinically available datasets: impact of inflow boundary conditions on hemodynamic indices for restenosis prediction. Computer Methods and Programs in Biomedicine, 251, Artikel 108214. https://doi.org/10.1016/j.cmpb.2024.108214

Moon, J., Mahravan, E. & Kim, D. (2024). Mutual interaction of a collapsing bubble and a nearby viscoelastic solid. Physical Review Fluids, 9(4), Artikel 043603. https://doi.org/10.1103/PhysRevFluids.9.043603

Mitra, T., singh, G., Darki, A. A., Madsen, S. P. & Dantan, A. R. (2024). Narrow-linewidth Fano microcavities with resonant subwavelength grating mirror. Optics Express, 32(9), 15667-15679. https://doi.org/10.1364/OE.521329

Sadik, S. & Yavari, A. (2024). Nonlinear anisotropic viscoelasticity. Journal of the Mechanics and Physics of Solids, 182, Artikel 105461. https://doi.org/10.1016/j.jmps.2023.105461

Sujon, M. A. S., Masato, D., Andriollo, T., Pan, Z., Nadimpalli, V. K., Henriquez, V. C. & Islam, A. (2024). Novel approach for optimizing mechanical and damping performance of MABS composites reinforced with basalt fibers: An experimental study. Composites Science and Technology, 251, Artikel 110578. https://doi.org/10.1016/j.compscitech.2024.110578

Zheng, W., Ma, L., Pei, S. & Aghababaei, R. (2024). Numerical assessment of transition in cutting mode and its effect on roughness creation. International Journal of Mechanical Sciences, 261, Artikel 108666. https://doi.org/10.1016/j.ijmecsci.2023.108666

Šeta, B., Sandberg, M., Brander, M., Mollah, M. T., Pokkalla, D. K., Kumar, V. & Spangenberg, J. (2024). Numerical modeling of fiber orientation in multi-layer, isothermal material-extrusion big area additive manufacturing. Additive Manufacturing, 92, Artikel 104396. https://doi.org/10.1016/j.addma.2024.104396

Langthjem, M. A. & Jensen, H. M. (2024). On matched asymptotic expansion solutions of a bucklewave propagation problem. Zeitschrift fuer Angewandte Mathematik und Mechanik, 104(5), 1. Artikel e202300655. https://doi.org/10.1002/zamm.202300655

E.F. Athanasiadis, A., Budzik, M. K., Fernando, D. & Dias, M. A. (2024). On micropolar elastic foundations. European Journal of Mechanics A - Solids, 105, Artikel 105277. https://doi.org/10.1016/j.euromechsol.2024.105277

Sadik, S. & Yavari, A. (2024). On the Balance Laws of Nonlinear Hyperelasticity. ArXiv. arXiv https://doi.org/10.48550/arXiv.2403.14543

Cremoncini, D., Frate, G. F., Bischi, A., Pedersen, T. T., Bruun Andresen, G., Bentien, A. & Ferrari, L. (2024). Optimal participation of a wind and hybrid battery storage system in the day-ahead and automatic frequency restoration reserve markets. Journal of Energy Storage, 94, Artikel 112309. https://doi.org/10.1016/j.est.2024.112309

Alamia, A., Partoon, B., Rattigan, E. & Bruun Andresen, G. (2024). Optimizing hydrogen and e-methanol production through Power-to-X integration in biogas plants. Energy Conversion and Management, 322, Artikel 119175. https://doi.org/10.1016/j.enconman.2024.119175

Strack, D., Manohar Rayudu, N., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2024). OPTIMIZING PATIENT-SPECIFIC BONE FINITE ELEMENT ANALYSIS: MESH CONVERGENCE AND MATERIAL GROUPING STRATEGIES. Orthopaedic Proceedings, 127. https://doi.org/10.1302/1358-992X.2024.18.127

Garg, H., Ledda, P. G., Skov Pedersen, J. & Pezzulla, M. (2024). Passive Viscous Flow Selection via Fluid-Induced Buckling. Physical Review Letters, 133(8), Artikel 084001. https://doi.org/10.1103/PhysRevLett.133.084001

Ulriksen, M. D., Greś, S. & Bernal, D. (2024). Perturbation-invariant eigenvalue assignment for statistical damage localization. Journal of Physics: Conference Series, 2647, Artikel 192017. https://doi.org/10.1088/1742-6596/2647/19/192017

Viser resultater 51 til 100 ud af 412

2

AU Engineering Profile

Download AU Engineering Profile 2013-2022:

Revideret 22.02.2024

-

Institut for Mekanik og Produktion