Publikationer

Her finder du en samlet liste over de publikationer, som er lavet af medarbejdere ved Institut for Mekanik og Produktion for eksempel tidsskriftsartikler, bøger, rapporter m.v.

Publikationsliste

Sortér efter: Dato | Forfatter | Titel

Zehtabiyan-Rezaie, N., Iosifidis, A. & Abkar, M. (2022). Data-driven fluid mechanics of wind farms: A review. Journal of Renewable and Sustainable Energy, 14(3), Artikel 032703. https://doi.org/10.1063/5.0091980

Böttjer, T., Ørnskov Rønsch, G., Gomes, C., Ramanujan, D., Iosifidis, A. & Larsen, P. G. (2022). Data-Driven Identification of Remaining Useful Life for Plastic Injection Moulds. I A.-L. Andersen, R. Andersen, T. D. Brunoe, M. Stoettrup Schioenning Larsen, K. Nielsen, A. Napoleone & S. Kjeldgaard (red.), Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems - Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference CARV 2021 and 10th World Mass Customization and Personalization Conference MCPC 2021 (s. 431-439). Springer. https://doi.org/10.1007/978-3-030-90700-6_49

Eidi, A., Zehtabiyan-Rezaie, N., Chiassi, R., Yang, X. I. A. & Abkar, M. (2022). Data-driven quantification of model-form uncertainty in Reynolds-averaged simulations of wind farms. Physics of Fluids, 34(8), Artikel 085135. https://doi.org/10.1063/5.0100076

Fulco , S., Budzik, M. K., D. Bain , E. & T. Turner , K. (2022). Decoupling toughness and strength through architected plasticity. Extreme Mechanics Letters, 57, Artikel 101912. https://doi.org/10.1016/j.eml.2022.101912

Hudert, M. M., Elvebakken, M. F., Meagher, M., Mangliar, L., Zhang, X. & Esterle, L. (2022). Deep learning enhanced robotic fabrication of timber-to-timber connections with densified hardwood nails. I Proceedings of the IASS 2022 Symposium affiliated with APCS 2022 conference: Innovation - Sustainability - Legacy (s. 1740-1748)

Suhr, M., Orlowitz, E., Hansen, J. F. & Brandt, A. (2022). Digital image correlation and operational modal analysis: A study of influential factors for non-contact measurements. 2778-2784. Afhandling præsenteret på ISMA 2022: Leuven Conference on Noise and Vibration Engineering, Leuven , Belgien.

Zhou, Z., Yang, X., Wang, H. & Zhang, X. (2022). Digital Twin with Integrated Robot-Human/Environment Interaction Dynamics for an Industrial Mobile Manipulator. Proceedings - IEEE International Conference on Robotics and Automation (ICRA), 5041-5047. https://doi.org/10.1109/ICRA46639.2022.9812004

Yang, J., Stroh, A., Chung, D. & Forooghi, P. (2022). Direct numerical simulation-based characterization of pseudo-random roughness in minimal channels. Journal of Fluid Mechanics, 941, Artikel A47. https://doi.org/10.1017/jfm.2022.331

Balling, O. & Sirangelo, D. (2022). Drawbar pull testing for machine-soil interaction characterization. 35-36. Abstract fra Advances and Innovations in Agricultural Engineering., Herning, Danmark.

Yang, X., Qiang, D., Chen, Z., Wang, H., Zhou, Z. & Zhang, X. (2022). Dynamic Modeling and Digital Twin of a Harmonic Drive Based Collaborative Robot Joint. I 2022 IEEE International Conference on Robotics and Automation, ICRA 2022 (s. 4862-4868). IEEE. https://doi.org/10.1109/ICRA46639.2022.9812458

Erenchun, A., Blanco, B., Gil-Negrete, N., Wang, B. & Kari, L. (2022). Effect of lubrication on the mechanical behavior of magnetorheological elastomers in compression mode. Polymer Testing, 111, Artikel 107617. https://doi.org/10.1016/j.polymertesting.2022.107617

Andersen, J. M. (2022). Energy efficient grain drying processes. 30-31. Abstract fra Advances and Innovations in Agricultural Engineering., Herning, Danmark.

Berntsen, J., Brandt, A. & Gryllias, K. (2022). Enhanced demodulation band selection based on Operational Modal Analysis (OMA) for bearing diagnostics. Mechanical Systems and Signal Processing, 181, Artikel 109300. https://doi.org/10.1016/j.ymssp.2022.109300

Fulco , S., Budzik, M. K. & Turner, K. (2022). Exploiting architected plasticity to enhance fracture toughness while maintaining strength. Abstract fra 19th U.S. National Congress of Theoretical and Applied

Mechanics, Austin, Texas, USA. https://drive.google.com/file/d/1uyFLy4Pk62paHMze4hVJSe7VnknWq1hT/view

Bokharaie, B., Aghababaei, R. & Budzik, M. K. (2022). Failure of additively manufactured carbon fiber composite hexagonal frames. Abstract fra The 20th European Conference on Composite Materials, Lausanne, Schweiz. file:///C:/Users/au564491/Downloads/Abstracts_Monday.pdf

Zinck Thellufsen, J., Lund, H., Vad Mathiesen, B., Thøis Madsen, P., Østergaard, P. A., Nielsen, S., Sorknæs, P., Wenzel, H., Münster, M., Berg Rosendal, M., Madsen, H., Østergaard, J., Morthorst, P. E., Sørensen, P. B., Bruun Andresen, G. & Victoria, M. (2022). Fakta om Atomkraft: Input til en faktabaseret diskussion af fordele og ulemper ved atomkraft som en del af den grønne omstilling i Danmark. https://vbn.aau.dk/ws/portalfiles/portal/491533150/Fakta_om_atomkraft_final.pdf

Amarloo, A., Forooghi, P. & Abkar, M. (2022). Frozen propagation of Reynolds force vector from high-fidelity data into Reynolds-averaged simulations of secondary flows. Physics of Fluids, 34(11), Artikel 115102. https://doi.org/10.1063/5.0123231

Ledda, P. G., Pezzulla, M., Jambon-Puillet, E., Brun, P. T. & Gallaire, F. (2022). Gravity-driven coatings on curved substrates: a differential geometry approach. Journal of Fluid Mechanics, 949, Artikel A38. https://doi.org/10.1017/jfm.2022.758

Schwenk-Nebbe, L. J. (2022). Heterogeneous Carbon Dioxide Emission Constraints in the European Energy System. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus Universitet.

Madary, A., Momeni, H. R., Abate, A. & Larsen, K. G. (2022). Hierarchical Identification of Nonlinear Hybrid Systems in a Bayesian Framework. Information and Computation, 289(Part A), Artikel 104947. https://doi.org/10.1016/j.ic.2022.104947

Sibani, P., Rasmussen, S. & Hansen, P. L. (2022). Human wealth evolution is an accelerating expansion underpinned by a decelerating optimization process. Physica A: Statistical Mechanics and its Applications, 608, Artikel 128286. https://doi.org/10.1016/j.physa.2022.128286

Zambrano, V., Mueller-Roemer, J., Sandberg, M., Talasila, P., Zanin, D., Larsen, P. G., Loeschner, E., Thronicke, W., Pietraroia, D., Landofi, G., Fontana, A., Laspalas, M., Antony, J., Poser, V., Kiss, T., Bergweiler, S., Pena Serna, S., Izquierdo, S., Viejo, I. ... Stork, A. (2022). Industrial Digitalization in the Industry 4.0 era: Classification, Reuse and Authoring of Digital Models on Digital Twin Platforms. Array, 14, Artikel 100176. https://doi.org/10.1016/j.array.2022.100176

Feng, H., Gomes, C., Gil Arboleda, S., Mikkelsen, P. H., Tola, D., Larsen, P. G. & Sandberg, M. (2022). Integration Of The Mape-K Loop In Digital Twins. I C. R. Martin, N. Emami, M. J. Blas & R. Rezaee (red.), Proceedings of the 2022 Annual Modeling and Simulation Conference, ANNSIM (s. 102-113). IEEE. https://doi.org/10.23919/ANNSIM55834.2022.9859489

Zhou, Z. (2022). Interaction Dynamics and Control of Collaborative Industrial Mobile Robot Manipulators for SME Manufacturing. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus Universitet.

Farhadiyadkuri, F., Popal, A. M., Paiwand, S. S. & Zhang, X. (2022). Interaction dynamics modeling and adaptive impedance control of robotic exoskeleton for adolescent idiopathic scoliosis. Computers in Biology and Medicine, 145, Artikel 105495. https://doi.org/10.1016/j.compbiomed.2022.105495

Song, M., Christensen, S. S., Moaveni, B., Brandt, A. & Hines, E. (2022). Joint parameter-input estimation for virtual sensing on an offshore platform using output-only measurements. Mechanical Systems and Signal Processing, 170, Artikel 108814. https://doi.org/10.1016/j.ymssp.2022.108814

Yang, H., Ge, M., Abkar, M. & I. A. Yang, X. (2022). Large-eddy simulation study of wind turbine array above swell sea. Energy, 256, Artikel 124674. https://doi.org/10.1016/j.energy.2022.124674

Zhou, Z., Li, L., Fürsterling, A., Durocher, H., Mouridsen, J. & Zhang, X. (2022). Learning-based object detection and localization for a mobile robot manipulator in SME production. Robotics and Computer-Integrated Manufacturing, 73, Artikel 102229. https://doi.org/10.1016/j.rcim.2021.102229

Poulsen, E., Eggertsen, M., Jepsen, E. H., Melvad, C. & Rysgaard, S. (2022). Lightweight drone-deployed autonomous ocean profiler for repeated measurements in hazardous areas – Example from glacier fronts in NE Greenland. HardwareX, 11, Artikel e00313. https://doi.org/10.1016/j.ohx.2022.e00313

Yang, X. I. A., E. S. Chen, P., Hu, R. & Abkar, M. (2022). Logarithmic-Linear Law of the Streamwise Velocity Variance in Stably Stratified Boundary Layers. Boundary-Layer Meteorology, 183(2), 199-213. https://doi.org/10.1007/s10546-021-00683-5

Pedersen, T. T., Gøtske, E. K., Dvorak, A., Andresen, G. B. & Victoria, M. (2022). Long-term implications of reduced gas imports on the decarbonization of the European energy system. Joule, 6(7), 1566-1580. https://doi.org/10.1016/j.joule.2022.06.023

Budzik, M. K., Fulco , S. & Turner, K. (2022). Materials with architected plasticity and decoupled strength and toughness. Abstract fra The 11th European Solid Mechanics , Galway, Irland.

Bazmohammadi, N., Madary, A., Quintero, J. C. V., Bazmohammadi, H., Khan, B., Wu, Y. & Guerrero, J. M. (2022). Microgrid Digital Twins: Concepts, Applications, and Future Trends. IEEE Access, 10, 2284-2302. https://doi.org/10.1109/ACCESS.2021.3138990

Foldager, F., Munkholm, L. J., Balling, O., Serban, R., Negrut, D., Heck, R. J. & Green, O. (2022). Modeling soil aggregate fracture using the discrete element method. Soil and Tillage Research, 218, Artikel 105295. https://doi.org/10.1016/j.still.2021.105295

Schäfer, K., Stroh, A., Forooghi, P. & Frohnapfel, B. (2022). Modelling spanwise heterogeneous roughness through a parametric forcing approach. Journal of Fluid Mechanics, 930, Artikel A7. https://doi.org/10.1017/jfm.2021.850

Zhang, Z., Zhang, L., Jasa, J., Negahban, M. & Gazonas, G. (2022). Molecular sources of ratcheting in poly-dispersed polycarbonate. International Journal of Fatigue, 154, Artikel 106567. https://doi.org/10.1016/j.ijfatigue.2021.106567

Andriollo, T., Kouznetsova, V. & Alessandretti, L. (2022). Network approach for the analysis of the irreversible deformation of solids with soft heterogeneities. Physical Review Materials, 6(11), Artikel L110601 . https://doi.org/10.1103/PhysRevMaterials.6.L110601

Andriollo, T. (2022). Network science approach to predict the yield strength of metals containing soft particles and pores. I O P Conference Series: Materials Science and Engineering, 1249, Artikel 012018. https://doi.org/10.1088/1757-899X/1249/1/012018

Sadik, S., Walker, M. G. & Dias, M. A. (2022). On local kirigami mechanics II: Stretchable creased solutions. Journal of the Mechanics and Physics of Solids, 161, Artikel 104812. https://doi.org/10.1016/j.jmps.2022.104812

Rao, S., Budzik, M. K. & Dias, M. A. (2022). On microscopic analysis of fracture in unidirectional composite material using phase field modelling. Composites Science and Technology, 220, Artikel 109242. https://doi.org/10.1016/j.compscitech.2021.109242

Zhu, J., Li, X., Zhou, Q. & Aghababaei, R. (2022). On the anisotropic scratching behavior of single crystalline copper at nanoscale. Tribology International, 175, Artikel 107794. https://doi.org/10.1016/j.triboint.2022.107794

L. Jensen, C. S., B. E. Pedersen, R., Mula, B. B., Escalona, J. & Balling, O. (2022). On the Combination of Geometrically Nonlinear Models and Substructuring for Multibody Simulation of Wind Turbine Blades. I 18th International Conference on Multibody Systems, Nonlinear Dynamics, and Control (MSNDC) Artikel DETC2022-90948, V009T09A011 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2022-90948

Ma, L. & Aghababaei, R. (2022). On the Effect of Adhesive Strength and Scratching Depth on Material Transfer During Nanoscale Scratching. Tribology Letters, 70(1), Artikel 26. https://doi.org/10.1007/s11249-021-01558-z

Breyer, C., Khalili, S., Bogdanov, D., Ram, M., Oyewo, A. S., Aghahosseini, A., Gulagi, A., Solomon, A. A., Keiner, D., Lopez, G., Østergaard, P. A., Lund, H., V. Mathiesen, B., Z. Jacobson, M., Victoria, M., Teske, S., Pregger, T., Fthenakis, V., Raugei, M. ... Sovacool, B. (2022). On the History and Future of 100% Renewable Energy Systems Research. IEEE Access, 10, 78176 - 78218. https://doi.org/10.1109/ACCESS.2022.3193402

Nasr Saleh, M., Budzik, M. K., Saeedifar, M., Zarouchas, D. & Teixeira de Freitas, S. (2022). On the influence of the adhesive and the adherend ductility on mode I fracture characterization of thick adhesively-bonded joints. International Journal of Adhesion and Adhesives, 115, Artikel 103123. https://doi.org/10.1016/j.ijadhadh.2022.103123

Langthjem, M. A. (2022). On the stability of a doubly infinite vortex array. Theoretical and Computational Fluid Dynamics, 36(3), 369-385. https://doi.org/10.1007/s00162-022-00604-3

Darki, A. A., Dantan, A., Nygaard, J. V., Madsen, S. P., Parthenopoulos, A., Toft-Vandborg, C. & Vandborg, C. (2022). Optical spatial differentiation with ultrathin freestanding subwavelength gratings. I P. Schelkens & T. Kozacki (red.), Optics, Photonics and Digital Technologies for Imaging Applications VII Artikel 121380D SPIE - International Society for Optical Engineering. https://doi.org/10.1117/12.2621186

Traistaru, O. T. L., Shyam, P., Christensen, M. & Madsen, S. P. (2022). Optimizing the energy product of exchange-coupled soft/hard Zn_0.2Fe_2.8O₄/SrFe₁₂O₁₉magnets. Journal of Applied Physics, 132(16), Artikel 163904. https://doi.org/10.1063/5.0103242

Blanco, B., Errandonea, I., Beltrán, S., Arrizabalaga, S. & Alvarado, U. (2022). Panhead accelerations-based methodology for monitoring the stagger in overhead contact line systems. Mechanism and Machine Theory, 171, Artikel 104742. https://doi.org/10.1016/j.mechmachtheory.2022.104742

Aliana, A., Chang, M., Østergaard, P. A., Victoria, M. & Andersen, A. N. (2022). Performance assessment of using various solar radiation data in modelling large-scale solar thermal systems integrated in district heating networks. Renewable Energy, 190, 699-712. https://doi.org/10.1016/j.renene.2022.03.163

Viser resultater 401 til 450 ud af 559

Forrige

Næste

Revideret 22.02.2024

Institut for Mekanik og Produktion