Publikationer

Her finder du en samlet liste over de publikationer, som er lavet af medarbejdere ved Institut for Mekanik og Produktion for eksempel tidsskriftsartikler, bøger, rapporter m.v.

Publikationsliste

Sortér efter: Dato | Forfatter | Titel

Darki, A. A., Madsen, S. P. & Dantan, A. R. (2022). Polarization-independent optical spatial differentiation with a doubly-resonant one-dimensional guided-mode grating. Optics Express, 30(3), 3962-3972. https://doi.org/10.1364/OE.450981

Lee, S., Yang, J., Forooghi, P., Stroh, A. & Bagheri, S. (2022). Predicting drag on rough surfaces by transfer learning of empirical correlations. Journal of Fluid Mechanics, 933, Artikel A18. https://doi.org/10.1017/jfm.2021.1041

Schwenk-Nebbe, L. J., Vind, J. E., Backhaus, A. J., Victoria, M. & Greiner, M. (2022). Principal spatiotemporal mismatch and electricity price patterns in a highly decarbonized networked European power system. iScience, 25(6), Artikel 104380. https://doi.org/10.1016/j.isci.2022.104380

Langthjem, M. A. & Jensen, H. M. (2022). Propagating buckles in undersea pipelines – A model problem. International Journal of Solids and Structures, 257, Artikel 111555. https://doi.org/10.1016/j.ijsolstr.2022.111555

Gautam, K. R., Bruun Andresen, G. & Victoria, M. (2022). Review and Techno-Economic Analysis of Emerging Thermo-Mechanical Energy Storage Technologies. Energies, 15(17), Artikel 6328. https://doi.org/10.3390/en15176328

Amarloo, A., Forooghi, P. & Abkar, M. (2022). Secondary flows in statistically unstable turbulent boundary layers with spanwise heterogeneous roughness. Theoretical and Applied Mechanics Letters, 12(2), Artikel 100317. https://doi.org/10.1016/j.taml.2021.100317

Victoria, M., Zeyen, E. & Brown, T. (2022). Speed of technological transformations required in Europe to achieve different climate goals. Joule, 6(5), 1066-1086. https://doi.org/10.1016/j.joule.2022.04.016

Budzik, M. K., Wolfahrt, M., Reis, P., Kozłowski, M., Sena-Cruz, J., Papadakis, L., Nasr Saleh, M., V. Machalicka, K., Teixeira de Freitas, S. & P. Vassilopoulos, A. (2022). Testing mechanical performance of adhesively bonded composite joints in engineering applications: an overview. The Journal of Adhesion, 98(14), 2133-2209. https://doi.org/10.1080/00218464.2021.1953479

Si, G., Ding, M., Zhang, Z. & Zhang, X. (2022). Theoretical thermal-mechanical modelling and experimental validation of a novel 3D three-fingered electrothermal microgripper. Precision Engineering, 77, 205-219. https://doi.org/10.1016/j.precisioneng.2022.05.013

Heide-Jørgensen, S., Budzik, M. K. & Ibsen, C. H. (2022). Three-dimensional, multiscale homogenization for hybrid woven composites with fiber-matrix debonding. Composites Science and Technology, 218, Artikel 109204. https://doi.org/10.1016/j.compscitech.2021.109204

Mirzaiee, R., Vernica, T., Scheuringer, K. & Bernstein, W. Z. (2022). Towards Retargetable Animations for Industrial Augmented Reality. I Proceedings - 2022 IEEE Conference on Virtual Reality and 3D User Interfaces Abstracts and Workshops, VRW 2022 (s. 872-873). IEEE. https://doi.org/10.1109/VRW55335.2022.00287

Si, G., Zhou, F., Zhang, Z. & Zhang, X. (2022). Tracking Multiple Zebrafish Larvae Using YOLOv5 and DeepSORT. I 2022 8th International Conference on Automation, Robotics and Applications, ICARA 2022 (s. 228-232). IEEE. https://doi.org/10.1109/ICARA55094.2022.9738556

Rincón, M. J., Reclari, M. & Abkar, M. (2022). Turbulent flow in small-diameter ultrasonic flow meters: A numerical and experimental study. Flow Measurement and Instrumentation, 87, Artikel 102227. https://doi.org/10.1016/j.flowmeasinst.2022.102227

Feng, H., Gomes, C., Sandberg, M., Macedo, H. D. & Larsen, P. G. (2022). Under What Conditions Does a Digital Shadow Track a Periodic Linear Physical System? I A. Cerone, M. Autili, A. Bucaioni, C. Gomes, P. Graziani, M. Palmieri, M. Temperini & G. Venture (red.), Software Engineering and Formal Methods. SEFM 2021 Collocated Workshops - CIFMA, CoSim-CPS, OpenCERT, ASYDE, Revised Selected Papers (s. 143-155). Springer. https://doi.org/10.1007/978-3-031-12429-7_11

Shehab, E., Meiirbekov, A., Amantayeva, A., Suleimen, A., Tokbolat, S. & Sarfraz, S. (2021). A cost modelling system for recycling carbon fiber-reinforced composites. Polymers, 13(23), Artikel 4208. https://doi.org/10.3390/polym13234208

Shehab, E., Meiirbekov, A., Amantayeva, A., Suleimen, A., Tokbolat, S., Sarfraz, S. & Ali, M. H. (2021). A fuzzy logic-based cost modelling system for recycling carbon fibre reinforced composites. Polymers, 13(24), Artikel 4370. https://doi.org/10.3390/polym13244370

Abu-Ghaida, H. & Kamari, A. (2021). An alternative approach to material and EPD mapping in the development of BIM-based LCA and LCC tools. I Proceedings of the 38th International Conference of CIB W78, Luxembourg, 13-15 October: Joint Conference CIB W78 - LDAC 2021 (s. 782-792). Artikel 78. http://itc.scix.net/paper/w78-2021-paper-078

Zhao, L., Su, L., Cui, N., Zhang, Z. & Zhang, X. (2021). A Nonlinear Mechanic Model of a Zebrafish Embryo under Microinjection. I CCRIS'21 - 2021 2nd International Conference on Control, Robotics and Intelligent System (s. 66-70). Association for Computing Machinery. https://doi.org/10.1145/3483845.3483895

Glisic, M., Veluri, B. & Ramanujan, D. (2021). A Reusable Unit Process Life Cycle Inventory Model for Infeed Centerless Grinding. I 26th Design for Manufacturing and the Life Cycle Conference (DFMLC): 26th Design for Manufacturing and the Life Cycle Conference (DFMLC) (Bind 5). Artikel DETC2021-69609, V005T05A025 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2021-69609

Sawant , M., Thakare, S., Rao, A. P., Feijóo Lorenzo, A. E. & Bokde, N. (2021). A Review on State-of-the-Art Reviews in Wind-Turbine- and Wind-Farm-Related Topics. Energies, 14(8), Artikel 2041. https://doi.org/10.3390/en14082041

Li, L., Wang, R. & Zhang, X. (2021). A Tutorial Review on Point Cloud Registrations: Principle, Classification, Comparison, and Technology Challenges. Mathematical Problems in Engineering, 2021, Artikel 9953910. https://doi.org/10.1155/2021/9953910

Balling, O., Jeppesen, M. R. & Madsen, S. A. (2021). Autonomous vehicle assessment framework. I Proceedings of the Ground Vehicle Systems Engineering and Technology Symposium (GVSETS)

Athanasiadis, A., Dias, M. & Budzik, M. K. (2021). Can confined mechanical metamaterials replace adhesives? Extreme Mechanics Letters, 48, Artikel 101411. https://doi.org/10.1016/j.eml.2021.101411

Vallerotto, G., Victoria, M., Jost, N., Askins, S., Dominguez, C., Herrero, R. & Anton, I. (2021). Comparison of achromatic doublet on glass Fresnel lenses for concentrator photovoltaics. Optics Express, 29(13), 20601-20616. https://doi.org/10.1364/OE.428160

Bibbo, N., Arora, V. & Pedersen, M. M. (2021). Comparison of Findley and MWCM multiaxial fatigue methods using the notch stress method on welded joints. I Procedia Structural Integrity (Bind 31, s. 75-79). Elsevier. https://doi.org/10.1016/j.prostr.2021.03.012

Matsuura, K., Mukai, K. & Langthjem, M. A. (2021). Computational and experimental study on ring tone. I S. Hernández & A. Coruña (red.), Advances in Fluid Dynamics with emphasis on Multiphase and Complex Flow (s. 141-151). WIT Press. https://doi.org/10.2495/MPF210121

Budzik, M. K., Athanasiadis, A. & Dias, M. A. (2021). Confined mechanical metamaterials under fracture loading. Abstract fra 6TH INTERNATIONAL CONFERENCE ON ADHESIVE BONDING 2021, Porto, Portugal.

Aghababaei, R., Malekan, M. & Budzik, M. (2021). Cutting Depth Dictates the Transition from Continuous to Segmented Chip Formation. Physical Review Letters, 127(23), Artikel A202. https://doi.org/10.1103/PhysRevLett.127.235502

Malekan, M., Bloch-Jensen, C. D., Zolbin, M. A., Ørskov, K. B., Jensen, H. M. & Aghababaei, R. (2021). Cutting edge wear in high-speed stainless steel end milling. International Journal of Advanced Manufacturing Technology, 114(9-10), 2911-2928. https://doi.org/10.1007/s00170-021-07006-5

Böttjer, T., Ørnskov Rønsch, G., Gonçalves Gomes, C. Â., Ramanujan, D., Iosifidis, A. & Larsen, P. G. (2021). Data-Driven Identification of Remaining Useful Life for Plastic Injection Moulds. I A.-L. Andersen, R. Andersen, D. Brunoe, M. Stoettrup Schioenning Larsen, K. Nielsen, A. Napoleone & S. Kjeldgaard (red.), Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems: Proceedings of the Changeable, Agile, Reconﬁgurable and Virtual Production Conference and the World Mass Customization & Personalization Conference (s. 431-439). Springer. https://www.springerprofessional.de/en/data-driven-identification-of-remaining-useful-life-for-plastic-/19816878

Schwenk-Nebbe, L. J., Victoria, M. & Bruun Andresen, G. (2021). Dataset: A proxy for historical CO2 emissions related to centralised electricity generation in Europe. Data in Brief, 36, Artikel 107016. https://doi.org/10.1016/j.dib.2021.107016

Zhou, Z., Li, L. & Zhang, X. (2021). Deep Learning on 3D Object Detection for Automatic Plug-in Charging Using a Mobile Manipulator. I 2021 IEEE International Conference on Robotics and Automation (ICRA) (s. 4148-4154). IEEE. https://doi.org/10.1109/ICRA48506.2021.9561106

Si, G., Sun, L., Zhang, Z. & Zhang, X. (2021). Design, Fabrication, and Testing of a Novel 3D 3-Fingered Electrothermal Microgripper with Multiple Degrees of Freedom. Micromachines, 12(4), Artikel 444. https://doi.org/10.3390/mi12040444

D. Huang, X. L. ., Jain, N., Abkar, M., Kunz, R. F. & Yang, X. I. A. (2021). Determining a priori a RANS model’s applicable range via global epistemic uncertainty quantification. Computers & Fluids, 230, Artikel 105113. https://doi.org/10.1016/j.compfluid.2021.105113

Feng, H., Gomes, C., Sandberg, M., Thule, C., Lausdahl, K. & Larsen, P. G. (2021). Developing a Physical and Digital Twin: An Example Process Model. I Companion Proceedings - 24th International Conference on Model-Driven Engineering Languages and Systems, MODELS-C 2021 (s. 286-295). IEEE. https://doi.org/10.1109/MODELS-C53483.2021.00050

Budzik, M. K., Lopes Fernandes, R., Teixeira de Freitas, S., Heide-Jørgensen, S. & Jumel, J. (2021). Effect of adhesive thickness on joint performance during mode I fracture testing. Abstract fra 6TH INTERNATIONAL CONFERENCE ON ADHESIVE BONDING 2021, Porto, Portugal.

Tapetado, P., Victoria, M., Greiner, M. & Usaola, J. (2021). Exploring backup requirements to complement wind, solar and hydro generation in a highly renewable Spanish power system. Energy Strategy Reviews, 38, Artikel 100729. https://doi.org/10.1016/j.esr.2021.100729

Pedersen, T. T., Victoria, M., Rasmussen, M. G. & Bruun Andresen, G. (2021). Exploring flexibility of near-optimal solutions to highly renewable energy systems. Abstract fra 48th IEEE Photovoltaic Specialists Conference (PVSC).

Pedersen, T. T., Victoria, M., Rasmussen, M. G. & Andresen, G. B. (2021). Exploring flexibility of near-optimal solutions to highly renewable energy systems. I 2021 IEEE 48th Photovoltaic Specialists Conference, PVSC 2021 (s. 387-391). IEEE. https://doi.org/10.1109/PVSC43889.2021.9518745

Kunrath, K. & Ramanujan, D. (2021). Fostering Sustainable Mindsets In Engineering Education. Proceedings of the Design Society , 1, 1597 - 1606. https://doi.org/10.1017/pds.2021.421

Malekan, M., Budzik, M. K., Jensen, H. M. & Aghababaei, R. (2021). Fracture analyses of surface asperities during sliding contact. Tribology International, 159, Artikel 106939. https://doi.org/10.1016/j.triboint.2021.106939

Budzik, M. K., Heide-Jørgensen, S. & Aghababaei, R. (2021). Fracture mechanics analysis of delamination along width-varying interfaces. Composites Part B: Engineering, 215, Artikel 108793. https://doi.org/10.1016/j.compositesb.2021.108793

Gøtske, E. K. & Victoria, M. (2021). Future operation of hydropower in Europe under high renewable penetration and climate change. iScience, 24(9), Artikel 102999. https://doi.org/10.1016/j.isci.2021.102999

Pedersen, M. T., Hansen, P. L. & Clausen, M. P. (2021). Gastronomy unravelled by physics: Gastrophysics. International Journal of Food Design, 6(2), 153-180. https://doi.org/10.1386/IJFD_00029_1

Zhang, B., Endelt, B., Lang, L. & Nielsen, K. B. (2021). Identification of constitutive parameters for thin-walled aluminium tubes using a hybrid strategy. Materials Today Communications, 28, Artikel 102670. https://doi.org/10.1016/j.mtcomm.2021.102670

Kunrath, K., Leka, S., Abu-Ghaida, H. & Ramanujan, D. (2021). IDENTIFYING INDUSTRY NEEDS FOR INNOVATION SKILLS IN ENGINEERING EDUCATION: A THEMATIC ANALYSIS OF CASES FROM DANISH INDUSTRY. 306-315. Afhandling præsenteret på SEFI 49th Annual Conference: Blended Learning in Engineering Education: Challenging, Enlightening - and Lasting?, Berlin, Virtual, Tyskland.

Hashmi, M. F., Ashish, B. K. K., Sharma, V., Keskar, A. G., Bokde, N., Yoon, J. H. & Geem, Z. W. (2021). LARNet: Real-Time Detection of Facial Micro Expression Using Lossless Attention Residual Network. Sensors, 21(4), Artikel 1098. https://doi.org/10.3390/s21041098

Boettjer, T., Krogshave, J. T. & Ramanujan, D. (2021). Machine-specific estimation of milling energy consumption in detailed design. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 143(8), Artikel 081010. https://doi.org/10.1115/1.4050179

Aghababaei, R. & Zhao, K. (2021). Micromechanics of material detachment during adhesive wear: A numerical assessment of Archard's wear model. Wear, 476, Artikel 203739. https://doi.org/10.1016/j.wear.2021.203739

Wang, H. & Zhang, X. (2021). Modal Dynamic Modelling and Experimental Validation of a Curved Extensible Continuum Manipulator. 1958-1965. Afhandling præsenteret på 2021 IEEE International Conference on Robotics and Automation (ICRA). https://doi.org/10.1109/ICRA48506.2021.9561914

Viser resultater 451 til 500 ud af 559

Forrige

Næste

Revideret 22.02.2024

Institut for Mekanik og Produktion