Aarhus University Seal

Publications

Below you can find a complete list of the publications that are written by employees at the Publications at Department of Mechanical and Production Engineering for example journal articles, books, reports etc. 

Publication list

Sort by: Date | Author | Title

He, L., Zhang, M., Wang, P., Li, J., Wang, H., Wang, Y., Ye, X., Yan, X., Zhou, S., Liu, S., Zhao, P. & Zhou, X. (2026). Laser melting deposition of dual-phase tungsten-based refractory high-entropy alloys: Face-centered cubic-driven strength and ductility synergy revealed by first-principles calculations. Journal of Materials Science and Technology, 265, 100-111. https://doi.org/10.1016/j.jmst.2025.12.033
Hassan, H., Chatterjee, A., Bushagour, A. & Layton, A. (2025). Potential for Digital Technologies and Additive Manufacturing to Support Lean Manufacturing and Circular Economy Synergies. In International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: Volume 2A: 45th Computers and Information in Engineering Conference (CIE) Article v02at02a040 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2025-169490
Hashmi, M. F., Ashish, B. K. K., Sharma, V., Keskar, A. G., Bokde, N., Yoon, J. H. & Geem, Z. W. (2021). LARNet: Real-Time Detection of Facial Micro Expression Using Lossless Attention Residual Network. Sensors, 21(4), Article 1098. https://doi.org/10.3390/s21041098
Hansen, C., I. A. Yang, X. & Abkar, M. (2022). Data-Driven Dynamical System Models of Roughness-Induced Secondary Flows in Thermally Stratified Boundary Layers. In Proceedings of the ASME 2022 Fluids Engineering Division Summer Meeting : Volume 2: Multiphase Flow (MFTC); Computational Fluid Dynamics (CFDTC); Micro and Nano Fluid Dynamics (MNFDTC) Article FEDSM2022-87630, V002T05A023 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/FEDSM2022-87630
Hansen, C., Yang, X. I. A. & Abkar, M. (2026). Wall-modeled large-eddy simulation of turbulent smooth body separation using the OpenFOAM flow solver. Journal of Fluids Engineering, Transactions of the ASME, 148(1), Article 011502. https://doi.org/10.1115/1.4068997
Haegel, N. M., Verlinden, P., Victoria, M., Altermatt, P., Atwater, H., Barnes, T., Breyer, C., Case, C., De Wolf, S., Deline, C., Dharmrin, M., Dimmler, B., Gloeckler, M., Goldschmidt, J. C., Hallam, B., Haussener, S., Holder, B., Jaeger, U., Jaeger-Waldau, A. ... W. Bett, A. (2023). Photovoltaics at multi-terawatt scale: Waiting is not an option: 25% annual PV growth is possible over the next decade. Science, 380(6640), 39-42. https://doi.org/10.1126/science.adf6957
Gøtske, E. K. (2024). Energy storage and climate impacts on the future renewable European energy system. [PhD dissertation, Aarhus University]. Aarhus Universitet.
Glisic, M., Veluri, B. & Ramanujan, D. (2021). A Reusable Unit Process Life Cycle Inventory Model for Infeed Centerless Grinding. In 26th Design for Manufacturing and the Life Cycle Conference (DFMLC): 26th Design for Manufacturing and the Life Cycle Conference (DFMLC) (Vol. 5). Article DETC2021-69609, V005T05A025 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2021-69609
Ghoul, A., Djeffal, S., Wang, H., Kara, K. & Hadjili, M. L. (2025). Enhancing Surgical Robotics: A Dynamic Model and Optimized Control Strategy for Cable-Driven Continuum Robots. Journal of Mechanisms and Robotics, 17(2), Article 021002. https://doi.org/10.1115/1.4065698
Gennis, S., Pezzulla, M. & Jensen, K. H. (2026). Mechanical limits shape the eccentric form of rose prickles. Journal of the Royal Society, Interface, 23(241), Article 20251300. https://doi.org/10.1098/rsif.2025.1300
Geckeler, C., Kirchgeorg, S., Strunk, G., Thostrup, F. B., Sangermano, F., Desiderato, A., Lüthi, M., Jucker, M., Gonzalez Herrera, M. A., Franco-Sierra, N. D., Pulido-Santacruz, P., Marc Chang, J. J., Aden Ip, Y. C., Mächler, E., Svenning, A., Mougeot, G., Høye, T. T., Fopp, F., Pellissier, L. ... Mintchev, S. (2025). Field Deployment of BiodivX Drones in the Amazon Rainforest for Biodiversity Monitoring. IEEE Transactions on Field Robotics, 2, 336-352. https://doi.org/10.1109/TFR.2025.3574945
Garg, H., Ledda, P. G., Skov Pedersen, J. & Pezzulla, M. (2024). Passive Viscous Flow Selection via Fluid-Induced Buckling. Physical Review Letters, 133(8), Article 084001. https://doi.org/10.1103/PhysRevLett.133.084001
Gao, X., Zhang, Y., Haahr-Lillevang, L., Vedel-Smith, N. K. & Andriollo, T. (2023). 3D strain pattern in additively manufactured AlSi10Mg from digital volume correlation. Heliyon, 9(12), Article e23186. https://doi.org/10.1016/j.heliyon.2023.e23186
Gad Kjeld, J., Avendaño-Valencia, L. D., Brandt, A., Christensen, S. S. & Karottki Falk Andersen, J. (2023). Towards minimal empirical uncertainty bounds of damping estimates of an offshore wind turbine in idling conditions. Mechanical Systems and Signal Processing, 191, Article 110180. https://doi.org/10.1016/j.ymssp.2023.110180
Fulco, S., Budzik, M. K., Xiao, H., Durian, D. J. & Turner, K. T. (2025). Disorder enhances the fracture toughness of 2D mechanical metamaterials. PNAS Nexus, 4(2), Article pgaf023. https://doi.org/10.1093/pnasnexus/pgaf023
Fulco, S., Purohit, P. K., Budzik, M. K. & Turner, K. T. (2026). Failure of disordered and stochastic lattice materials. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 482(2340), Article 20250993. https://doi.org/10.1098/rspa.2025.0993
Fulco , S., Budzik, M. K. & Turner, K. (2022). Exploiting architected plasticity to enhance fracture toughness while maintaining strength. Abstract from 19th U.S. National Congress of Theoretical and Applied

Mechanics, Austin, Texas, United States. https://drive.google.com/file/d/1uyFLy4Pk62paHMze4hVJSe7VnknWq1hT/view
Fulco , S., Budzik, M. K., D. Bain , E. & T. Turner , K. (2022). Decoupling toughness and strength through architected plasticity. Extreme Mechanics Letters, 57, Article 101912. https://doi.org/10.1016/j.eml.2022.101912
Fulco , S., Budzik, M. K. & T. Turner , K. T. (2024). Enhancing toughness through geometric control of the process zone. Journal of the Mechanics and Physics of Solids, 184, Article 105548. https://doi.org/10.1016/j.jmps.2024.105548
Fuentes, J., Guix, M., Cenev, Z. M., Bakenecker, A. C., Ruiz-González, N., Beaune, G., Timonen, J. V. I., Sanchez, S. & Magdanz, V. (2025). Ferrofluid-Based Bioink for 3D Printed Skeletal Muscle Tissues with Enhanced Force and Magnetic Response. Advanced Materials Interfaces, 12(13), Article 2400824. https://doi.org/10.1002/admi.202400824
Friis, S. J., Strøm Hansen, T., Olesen, C. G., Poulsen, M., Gregersen, H. & Nygaard, J. V. (2025). Experimental and numerical study of solid needle insertions into human stomach tissue. Journal of the Mechanical Behavior of Biomedical Materials, 162, Article 106832. https://doi.org/10.1016/j.jmbbm.2024.106832
Frandsen, L. N., Kristensen, C. K., Haahr-Lillevang, L., Klingaa, C. G., Mohanty, S. & Pedersen, M. M. (2023). A method for developing predictive models of quality metrics and gas flow variables for 316L PBF-LB/M printed components based on image analysis. In O. Riemer, C. Nisbet & D. Phillips (Eds.), European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 23rd International Conference and Exhibition, EUSPEN 2023: Copenhagen 2023 (pp. 115-118). Euspen.