Find

For students
For PhDs
For employees

Department of Mechanical and Production Engineering

Publications

Below you can find a complete list of the publications that are written by employees at the Publications at Department of Mechanical and Production Engineering for example journal articles, books, reports etc.

Publication list

Sort by: Date | Author | Title

Wang, H. & Zhang, X. (2021). Modal Dynamic Modelling and Experimental Validation of a Curved Extensible Continuum Manipulator. 1958-1965. Paper presented at 2021 IEEE International Conference on Robotics and Automation (ICRA). https://doi.org/10.1109/ICRA48506.2021.9561914

Wang, H., Zhou, Z., Yang, X. & Zhang, X. (2022). A Switchable Rigid-Continuum Robot Arm: Design and Testing. In 2022 IEEE International Conference on Robotics and Automation, ICRA 2022 (pp. 5162-5169). IEEE. https://doi.org/10.1109/ICRA46639.2022.9812074

Wang, C., Cong, D., Tang, G., Zhou, X. & Li, J. (2024). Improving thermoelectric properties in double half-Heusler M₈Fe_xNi_8−xSb₈ (M = TiZrHfNb)-InSb compounds via synergistic multiscale defects and high-mobility carrier injection. Chemical Engineering Journal, 496, Article 154313. https://doi.org/10.1016/j.cej.2024.154313

Walmik Gajghate, P., Mirajkar, A. B., Shaikh, U., Bokde, N. & Mundher Yaseen, Z. (2021). Optimization of Layout and Pipe Sizes for Irrigation Pipe Distribution Network Using Steiner Point Concept. Mathematical Problems in Engineering, 2021, Article 6657459 . https://doi.org/10.1155/2021/6657459

Volk, M., Yuksel, O., Baran, I., Hattel, J. H., Spangenberg, J. & Sandberg, M. (2022). Cost-efficient, automated, and sustainable composite profile manufacture: A review of the state of the art, innovations, and future of pultrusion technologies. Composites Part B: Engineering, 246, Article 110135. https://doi.org/10.1016/j.compositesb.2022.110135

Victoria, M., Haegel, N., Peters, I. M., Sinton, R., Jäger-Waldau, A., del Canizo, C., Breyer, C., Stocks, M., Blakers, A., Kaizuka, I., Komoto, K. & Smets, A. (2021). Solar photovoltaics is ready to power a sustainable future. Joule, 5(5), 1041-1056. https://doi.org/10.1016/j.joule.2021.03.005

Victoria, M., Zeyen, E. & Brown, T. (2022). Speed of technological transformations required in Europe to achieve different climate goals. Joule, 6(5), 1066-1086. https://doi.org/10.1016/j.joule.2022.04.016

Vero, K., Islam, R. & Borah, J. P. (2023). First-principles study on the enhancement of structure stability and magnetocrystalline anisotropy energy of L1₀-ordered Mn_1−xFe_xAlC compound for permanent magnet application. Journal of Applied Physics, 134(15), Article 153902. https://doi.org/10.1063/5.0172356

Vernica, T., Glišić, M., Veluri, B. & Ramanujan, D. (2023). Volumetric mapping and visualization of life cycle assessment results on computer-aided design models. Journal of Cleaner Production, 418, Article 138035. https://doi.org/10.1016/j.jclepro.2023.138035

Vernica, T., Aher, G. R., Veluri, B. & Ramanujan, D. (2023). LCAD: A Framework for Coupling Computer-Aided Design and Life Cycle Analysis Visualizations. In ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 28th Design for Manufacturing and the Life Cycle Conference (DFMLC) Article DETC2023-116573, V005T05A007; American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2023-116573

Velu, R., Karupppasamy, S. & Kumar Subramaniyan, A. K. (Eds.) (2024). Digital Design and Manufacturing of Medical Devices and Systems. (1 ed.) Springer. https://doi.org/10.1007/978-981-99-7100-8

van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2022). Composite joint toughening by multiscale architecturing through integrated manufacturing. Abstract from The 11th European Solid Mechanics , Galway, Ireland. file:///C:/Users/au564491/Downloads/vanInnis_esmc2022%20(1).pdf

van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2023). Ultra tough architected joints through single step bonding process with tunable properties. 205. Abstract from International Conference on Adhesive Bonding 2023, Porto, Portugal.

van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2024). Ultra-tough architected adhesive joints for integrated composite processing and bonding. Composites Part A: Applied Science and Manufacturing, 177, Article 107949. https://doi.org/10.1016/j.compositesa.2023.107949

van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2024). Ultra tough architected joints through single manufacturing step. In 9th International Conference on Fracture of Polymers, Composites and Adhesives file:///C:/Users/au564491/Downloads/AbstractDiablerets.pdf

Vallerotto, G., Victoria, M., Jost, N., Askins, S., Dominguez, C., Herrero, R. & Anton, I. (2021). Comparison of achromatic doublet on glass Fresnel lenses for concentrator photovoltaics. Optics Express, 29(13), 20601-20616. https://doi.org/10.1364/OE.428160

Vadrot, A. F., I. A. Yang, X., Bae, H. J. & Abkar, M. (2023). Log-law recovery through reinforcement-learning wall model for large eddy simulation. Physics of Fluids, 35(5), Article 055122 . https://doi.org/10.1063/5.0147570

Vadrot, A. F., Yang, X. I. A. & Abkar, M. (2023). Survey of machine-learning wall models for large-eddy simulation. Physical Review Fluids, 8(6), Article 064603. https://doi.org/10.1103/PhysRevFluids.8.064603

Ulriksen, M. D., Tcherniak, D., Kirkegaard, P. H. & Damkilde, L. (2016). Operational Modal Analysis and Wavelet Transformation for Damage Identification in Wind Turbine Blades. Structural Health Monitoring, 15(4), 381-388. https://doi.org/10.1177/1475921715586623

Ulriksen, M. D., Jepsen, M. & Bernal, D. (2023). Closed-loop load vectors for structural damage localization. Mechanical Systems and Signal Processing, 196, Article 110321. https://doi.org/10.1016/j.ymssp.2023.110321

Ulriksen, M. D. & Bernal, D. (2024). LOCALIZATION OF EARTHQUAKE-INDUCED STRUCTURAL DAMAGE USING OUTPUT FEEDBACK EIGENSTRUCTURE ASSIGNMENT. In 18th World Conference on Earthquake Engineering (WCEE2024)

Ulriksen, M. D., Greś, S. & Bernal, D. (2024). Perturbation-invariant eigenvalue assignment for statistical damage localization. Journal of Physics: Conference Series, 2647(19), Article 192017. https://doi.org/10.1088/1742-6596/2647/19/192017

Truong, T. T., Airao, J., Hojati, F., Ilvig, C. F., Azarhoushang, B., Karras, P. & Aghababaei, R. (2024). Data-driven prediction of tool wear using Bayesian regularized artificial neural networks. Measurement: Journal of the International Measurement Confederation, 238, Article 115303. https://doi.org/10.1016/j.measurement.2024.115303

Traistaru, O. T. L., Shyam, P., Christensen, M. & Madsen, S. P. (2022). Optimizing the energy product of exchange-coupled soft/hard Zn_0.2Fe_2.8O₄/SrFe₁₂O₁₉magnets. Journal of Applied Physics, 132(16), Article 163904. https://doi.org/10.1063/5.0103242

Torabinejad, V., Aliofkhazraei, M., Rouhaghdam, A. S., Allahyarzadeh, MH., Kasama, T. & Alimadadi, H. (2017). Mechanical properties of multilayer Ni-Fe and Ni-Fe-Al2O3 nanocomposite coating. Materials Science and Engineering: A, 700, 448-456.

Thoft Krogshave, J., Böttjer, T. & Ramanujan, D. (2020). Machine-Specific Energy Estimation Using the Unit Process Life Cycle Inventory (UPLCI) Model. In ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: Volume 6: 25th Design for Manufacturing and the Life Cycle Conference (DFMLC) Article V006T06A031 American Society of Mechanical Engineers. https://doi.org/10.1115/DETC2020-22483

Thevamaran, R., Griesbach, C., Yazdi, S., Ponga, M., Alimadadi, H., Lawal, O., Jeon, S.-J. & Thomas, E. L. (2020). Dynamic martensitic phase transformation in single-crystal silver microcubes. Acta Materialia, 182, 131-143.

Teixeira de Freitas, S., Roos, L., Papadakis, L., Sena-Cruz, J. & Budzik, M. K. (2022, Feb). COST Action CA18120: Reliable roadmap for certification of bonded primary structures APPLICATION FOR COST GRANTS. EU. https://certbond.eu/wp-content/uploads/Certbond-Guidelines_COST-Grants_v20221114.pdf

Teixeira de Freitas, S. & Budzik, M. K. (2023). Bondline thickness: Fracture mechanics perspective. In D. A. Dillard (Ed.), Advances in Structural Adhesive Bonding, Second Edition (2 ed., pp. 615-641). Woodhead Publishing. https://doi.org/10.1016/B978-0-323-91214-3.00027-2

Tapetado, P., Victoria, M., Greiner, M. & Usaola, J. (2021). Exploring backup requirements to complement wind, solar and hydro generation in a highly renewable Spanish power system. Energy Strategy Reviews, 38, Article 100729. https://doi.org/10.1016/j.esr.2021.100729

Tabassian, R. & Rezaeepazhand, J. (2011). Stability analysis of smart sandwich beam with cross-ply faces and ER core subjected to axial loads. Journal of Reinforced Plastics and Composites , 31(1), 55-64. https://doi.org/10.1177/0731684411431122

Szemeti, G. & Ramanujan, D. (2022). An Empirical Benchmark for Resource Use in Fused Deposition Modelling 3D Printing of Isovolumetric Mechanical Components. Procedia CIRP, 105, 183-191. https://doi.org/10.1016/j.procir.2022.02.030

Sujon, M. A. S., Masato, D., Andriollo, T., Pan, Z., Nadimpalli, V. K., Henriquez, V. C. & Islam, A. (2024). Novel approach for optimizing mechanical and damping performance of MABS composites reinforced with basalt fibers: An experimental study. Composites Science and Technology, 251, Article 110578. https://doi.org/10.1016/j.compscitech.2024.110578

Suhr, M., Orlowitz, E., Hansen, J. F. & Brandt, A. (2022). Digital image correlation and operational modal analysis: A study of influential factors for non-contact measurements. 2778-2784. Paper presented at ISMA 2022: Leuven Conference on Noise and Vibration Engineering, Leuven , Belgium.

Sugiyama, Y., Langthjem, M. A., Iwama, T., Kobayashi, M., Katayama, K. & Yutani, H. (2012). Shape optimization of cantilevered columns subjected to a rocket-based follower force and its experimental verification. Structural and Multidisciplinary Optimization, 46, 829-838.

Sugiyama, Y., Langthjem, M. A. & Katayama, K. (2021). Shape‐optimized Cantilevered Columns under a Rocket‐based Follower Force. In N. Challamel, J. Kaplunov & I. Takewaki (Eds.), Modern Trends in Structural and Solid Mechanics 1: Statics and Stability (pp. 201-228). Wiley.

Subasic, M., Olsson, M., Dadbakhsh, S., Zhao, X., Krakhmale, P. & Mansour, R. (2023). Fatigue strength improvement of additively manufactured 316L stainless steel with high porosity through preloading. International Journal of Fatigue, 180, Article 108077. https://doi.org/10.1016/j.ijfatigue.2023.108077

Subasic, M., Ireland, A., Mansour, R., Enblom, P., Krakhmalev, P., Åsberg, M., Fazi, A., Gårdstam, J., Shipley, J., Waernqvist, P., Forssgren, B. & Efsing, P. (2024). Experimental investigation and numerical modelling of the cyclic plasticity and fatigue behavior of additively manufactured 316 L stainless steel. International Journal of Plasticity, 176, Article 103966. https://doi.org/10.1016/j.ijplas.2024.103966

Strässle, R. M., Faldella, F. & Doll, U. (2024). Deep learning-based image segmentation for instantaneous flame front extraction. Experiments in Fluids, 65(6), Article 94. https://doi.org/10.1007/s00348-024-03814-z

Srinivasan, V., Song, B., Luo, J., Karupppasamy, S., Elara Mohan, R., Blessing, L. & Wood, K. (2023). Do Analogies and Analogical Distance Influence Ideation Outcomes in Engineering Design? In S. Mukherjee, V. Dutt & N. Srinivasan (Eds.), Applied Cognitive Science and Technology: Implications of Interactions Between Human Cognition and Technology (pp. 211–230). Springer. https://doi.org/10.1007/978-981-99-3966-4_13

Speakman, G. A., Abkar, M., A. Martínez-Tossas, L. & Bastankhah, M. (2021). Wake steering of multirotor wind turbines. Wind Energy, 24(11), 1294-1314. https://doi.org/10.1002/we.2633

Sørensen, K. D., Jensen, H. M. & Clausen, J. (2008). Delamination of Compressed Thin Layers at Corners. International Journal of Solids and Structures, 45(22-23), 5867-5878. https://doi.org/10.1016/j.ijsolstr.2008.07.004

Song, M., Christensen, S. S., Moaveni, B., Brandt, A. & Hines, E. (2022). Joint parameter-input estimation for virtual sensing on an offshore platform using output-only measurements. Mechanical Systems and Signal Processing, 170, Article 108814. https://doi.org/10.1016/j.ymssp.2022.108814

Søgaard Kristensen, A., Kruse Sørensen, E., Madsen, C., Kristofersson, J. & Forooghi, P. (2023). Performance analysis of heat pumps with zeotropic mixtures at different load conditions. International Journal of Refrigeration, 145, 264-275. https://doi.org/10.1016/j.ijrefrig.2022.09.028

Skovsgaard, S. P. H. & Heide-Jørgensen, S. (2021). Three-dimensional mechanical behavior of composite with fibre-matrix delamination through homogenization of micro-structure. Composite Structures, 275, Article 114418. https://doi.org/10.1016/j.compstruct.2021.114418

Sivebaek, I. M., Aghababaei, R. & Espallargas, N. (2024). Editorial: Selected papers from NORDTRIB 2022. Wear, 544-545, Article 205183. https://doi.org/10.1016/j.wear.2023.205183

singh, G., Mitra, T., Madsen, S. P. & Dantan, A. R. (2024). Highly reflective and high-Q thin resonant subwavelength gratings. Journal of Physics: Photonics, 6, Article 045009. https://doi.org/10.1088/2515-7647/ad70e7

Sibani, P., Rasmussen, S. & Hansen, P. L. (2022). Human wealth evolution is an accelerating expansion underpinned by a decelerating optimization process. Physica A: Statistical Mechanics and its Applications, 608, Article 128286. https://doi.org/10.1016/j.physa.2022.128286

Si, G., Sun, L., Zhang, Z. & Zhang, X. (2021). Design, Fabrication, and Testing of a Novel 3D 3-Fingered Electrothermal Microgripper with Multiple Degrees of Freedom. Micromachines, 12(4), Article 444. https://doi.org/10.3390/mi12040444

Si, G., Sun, L., Zhang, Z. & Zhang, X. (2021). Theoretical thermal-mechanical modelling and experimental validation of a three-dimensional (3D) electrothermal microgripper with three fingers. Micromachines, 12(12), Article 1512. https://doi.org/10.3390/mi12121512

Displaying results 51 to 100 out of 385

2

AU Engineering Profile

Download AU Engineering Profile 2013-2022:

Revised 22.02.2024

-

AU Engineering