Find

For students
For PhDs
For employees

Department of Mechanical and Production Engineering

Publications

Below you can find a complete list of the publications that are written by employees at the Publications at Department of Mechanical and Production Engineering for example journal articles, books, reports etc.

Publication list

Sort by: Date | Author | Title

Sutton, M., Daniels, J., Masoudi, N., Gorsich, D. & Turner, C. (2024). Approaches for exploration, analysis, and visualization of tradespace for engineering decision-making. Proceedings of the Design Society , 4, 3023-3032. https://doi.org/10.1017/pds.2024.306

Sujon, M. A. S., Masato, D., Andriollo, T., Pan, Z., Nadimpalli, V. K., Henriquez, V. C. & Islam, A. (2024). Novel approach for optimizing mechanical and damping performance of MABS composites reinforced with basalt fibers: An experimental study. Composites Science and Technology, 251, Article 110578. https://doi.org/10.1016/j.compscitech.2024.110578

Suhr, M., Orlowitz, E., Hansen, J. F. & Brandt, A. (2022). Digital image correlation and operational modal analysis: A study of influential factors for non-contact measurements. 2778-2784. Paper presented at ISMA 2022: Leuven Conference on Noise and Vibration Engineering, Leuven , Belgium.

Sugiyama, Y., Langthjem, M. A., Iwama, T., Kobayashi, M., Katayama, K. & Yutani, H. (2012). Shape optimization of cantilevered columns subjected to a rocket-based follower force and its experimental verification. Structural and Multidisciplinary Optimization, 46, 829-838.

Sugiyama, Y., Langthjem, M. A. & Katayama, K. (2021). Shape‐optimized Cantilevered Columns under a Rocket‐based Follower Force. In N. Challamel, J. Kaplunov & I. Takewaki (Eds.), Modern Trends in Structural and Solid Mechanics 1: Statics and Stability (pp. 201-228). Wiley.

Subasic, M., Olsson, M., Dadbakhsh, S., Zhao, X., Krakhmale, P. & Mansour, R. (2024). Fatigue strength improvement of additively manufactured 316L stainless steel with high porosity through preloading. International Journal of Fatigue, 180, Article 108077. https://doi.org/10.1016/j.ijfatigue.2023.108077

Subasic, M., Ireland, A., Mansour, R., Enblom, P., Krakhmalev, P., Åsberg, M., Fazi, A., Gårdstam, J., Shipley, J., Waernqvist, P., Forssgren, B. & Efsing, P. (2024). Experimental investigation and numerical modelling of the cyclic plasticity and fatigue behavior of additively manufactured 316 L stainless steel. International Journal of Plasticity, 176, Article 103966. https://doi.org/10.1016/j.ijplas.2024.103966

Strässle, R. M., Faldella, F. & Doll, U. (2024). Deep learning-based image segmentation for instantaneous flame front extraction. Experiments in Fluids, 65(6), Article 94. https://doi.org/10.1007/s00348-024-03814-z

Strack, D., Manohar Rayudu, N., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2024). OPTIMIZING PATIENT-SPECIFIC BONE FINITE ELEMENT ANALYSIS: MESH CONVERGENCE AND MATERIAL GROUPING STRATEGIES. Orthopaedic Proceedings, 127. https://doi.org/10.1302/1358-992X.2024.18.127

Strack, D., Mesbah, M., Manohar Rayudu, N., Baum, T., Kirschke , J. S. & Karupppasamy, S. (2024). IMPACT OF ANNULUS FIBROSUS STIFFNESS ON THE FRACTURE LOAD OF FUNCTIONAL SPINE UNITS. Orthopaedic Proceedings, 102. https://doi.org/10.1302/1358-992X.2024.18.102

Strack, D., Mesbah, M., Kirschke , J. S. & Karupppasamy, S. (2025). Biomechanical Alterations Following Vertebral Fracture: A Patient-Specific L3-L5 Finite Element Analysis. Abstract from World Congress of Orthopaedic Research, Adelaide, South Australia, Australia. https://doi.org/10.13140/RG.2.2.28212.10884

Strack, D., Dieckmeyer, M., Sollmann , N., Kirschke , J. S. & Karupppasamy, S. (2025). Unexpectedly Higher Finite Element-Derived Strength in Fractured Vertebrae: Insights from a Retrospective Study. Abstract from Annual Meeting of the American Society of Bone and Mineral Research, Seattle, Washington, United States. https://doi.org/10.13140/RG.2.2.18868.72321

Strack, D., Mesbah, M., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2025). Interpatient variability and validation of simplified L4-L5 Finite Element Model. Abstract from The XXX Congress of the International Society of Biomechanics , Stockholm, Sweden. https://www.researchgate.net/publication/395188992_Interpatient_variability_and_validation_of_simplified_L4-L5_Finite_Element_Model

Srinivasan, V., Song, B., Luo, J., Karupppasamy, S., Elara Mohan, R., Blessing, L. & Wood, K. (2023). Do Analogies and Analogical Distance Influence Ideation Outcomes in Engineering Design? In S. Mukherjee, V. Dutt & N. Srinivasan (Eds.), Applied Cognitive Science and Technology: Implications of Interactions Between Human Cognition and Technology (pp. 211–230). Springer. https://doi.org/10.1007/978-981-99-3966-4_13

Speakman, G. A., Abkar, M., A. Martínez-Tossas, L. & Bastankhah, M. (2021). Wake steering of multirotor wind turbines. Wind Energy, 24(11), 1294-1314. https://doi.org/10.1002/we.2633

Spangsberg, E., Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Multiscale Modelling of Heat Transfer in Selective Laser Sintering. engrXiv. https://doi.org/10.31224/4704

Sørensen, K. D., Jensen, H. M. & Clausen, J. (2008). Delamination of Compressed Thin Layers at Corners. International Journal of Solids and Structures, 45(22-23), 5867-5878. https://doi.org/10.1016/j.ijsolstr.2008.07.004

Song, M., Christensen, S. S., Moaveni, B., Brandt, A. & Hines, E. (2022). Joint parameter-input estimation for virtual sensing on an offshore platform using output-only measurements. Mechanical Systems and Signal Processing, 170, Article 108814. https://doi.org/10.1016/j.ymssp.2022.108814

Søgaard Kristensen, A., Kruse Sørensen, E., Madsen, C., Kristofersson, J. & Forooghi, P. (2023). Performance analysis of heat pumps with zeotropic mixtures at different load conditions. International Journal of Refrigeration, 145, 264-275. https://doi.org/10.1016/j.ijrefrig.2022.09.028

Skovsgaard, S. P. H. & Heide-Jørgensen, S. (2021). Three-dimensional mechanical behavior of composite with fibre-matrix delamination through homogenization of micro-structure. Composite Structures, 275, Article 114418. https://doi.org/10.1016/j.compstruct.2021.114418

Sivebaek, I. M., Aghababaei, R. & Espallargas, N. (2024). Editorial: Selected papers from NORDTRIB 2022. Wear, 544-545, Article 205183. https://doi.org/10.1016/j.wear.2023.205183

singh, G., Mitra, T., Madsen, S. P. & Dantan, A. R. (2024). Highly reflective and high-Q thin resonant subwavelength gratings. Journal of Physics: Photonics, 6(4), Article 045009. https://doi.org/10.1088/2515-7647/ad70e7

Sibani, P., Rasmussen, S. & Hansen, P. L. (2022). Human wealth evolution is an accelerating expansion underpinned by a decelerating optimization process. Physica A: Statistical Mechanics and its Applications, 608, Article 128286. https://doi.org/10.1016/j.physa.2022.128286

Si, G., Sun, L., Zhang, Z. & Zhang, X. (2021). Design, Fabrication, and Testing of a Novel 3D 3-Fingered Electrothermal Microgripper with Multiple Degrees of Freedom. Micromachines, 12(4), Article 444. https://doi.org/10.3390/mi12040444

Si, G., Sun, L., Zhang, Z. & Zhang, X. (2021). Theoretical thermal-mechanical modelling and experimental validation of a three-dimensional (3D) electrothermal microgripper with three fingers. Micromachines, 12(12), Article 1512. https://doi.org/10.3390/mi12121512

Si, G., Chen, F. & Zhang, X. (2022). Comparison of the Dynamic Performance of Planar 3-DOF Parallel Manipulators. Machines, 10(4), Article 233. https://doi.org/10.3390/machines10040233

Si, G., Ding, M., Zhang, Z. & Zhang, X. (2022). Theoretical thermal-mechanical modelling and experimental validation of a novel 3D three-fingered electrothermal microgripper. Precision Engineering, 77, 205-219. https://doi.org/10.1016/j.precisioneng.2022.05.013

Si, G., Zhou, F., Zhang, Z. & Zhang, X. (2022). Tracking Multiple Zebrafish Larvae Using YOLOv5 and DeepSORT. In 2022 8th International Conference on Automation, Robotics and Applications, ICARA 2022 (pp. 228-232). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICARA55094.2022.9738556

Si, G., Zhao, Z., Zhang, Z. & Zhang, X. (2024). Design and Experimental Investigation of a Force Sensor for a 3-D Electrothermal Microgripper. IEEE Sensors Journal, 24(3), 2934-2944. https://doi.org/10.1109/JSEN.2023.3336214

Si, G., Zhang, H., Zhang, Z. & Zhang, X. (2024). Enabling intuitive and effective micromanipulation: A wearable exoskeleton-integrated macro-to-micro teleoperation system with a 3D electrothermal microgripper. Robotics and Autonomous Systems, 181, Article 104776. https://doi.org/10.1016/j.robot.2024.104776

Shojaeifard, M., Ferraresso, M., Lucantonio, A. & Bacca, M. (2025). Machine learning-based optimal design of fibrillar adhesives. Journal of the Royal Society Interface, 22(223), Article 20240636. https://doi.org/10.1098/rsif.2024.0636

Shehab, E., Meiirbekov, A., Amantayeva, A., Suleimen, A., Tokbolat, S. & Sarfraz, S. (2021). A cost modelling system for recycling carbon fiber-reinforced composites. Polymers, 13(23), Article 4208. https://doi.org/10.3390/polym13234208

Shehab, E., Meiirbekov, A., Amantayeva, A., Suleimen, A., Tokbolat, S., Sarfraz, S. & Ali, M. H. (2021). A fuzzy logic-based cost modelling system for recycling carbon fibre reinforced composites. Polymers, 13(24), Article 4370. https://doi.org/10.3390/polym13244370

Šeta, B., Sandberg, M., Brander, M., Tusher Mollah, M., Pokkalla, D., Kumar, V. & Spangenberg, J. (2023). Modeling fiber orientation and strand shape morphology in three-dimensional material extrusion additive manufacturing. Composites Part B: Engineering, 266, Article 110957. https://doi.org/10.1016/j.compositesb.2023.110957

Šeta, B., Sandberg, M., Brander, M., Mollah, M. T., Pokkalla, D. K., Kumar, V. & Spangenberg, J. (2024). Numerical modeling of fiber orientation in multi-layer, isothermal material-extrusion big area additive manufacturing. Additive Manufacturing, 92, Article 104396. https://doi.org/10.1016/j.addma.2024.104396

Schwenk-Nebbe, L. J., Victoria, M. & Bruun Andresen, G. (2021). Dataset: A proxy for historical CO2 emissions related to centralised electricity generation in Europe. Data in Brief, 36, Article 107016. https://doi.org/10.1016/j.dib.2021.107016

Schwenk-Nebbe, L. J., Vind, J. E., Backhaus, A. J., Victoria, M. & Greiner, M. (2022). Principal spatiotemporal mismatch and electricity price patterns in a highly decarbonized networked European power system. iScience, 25(6), Article 104380. https://doi.org/10.1016/j.isci.2022.104380

Schwenk-Nebbe, L. J. (2022). Heterogeneous Carbon Dioxide Emission Constraints in the European Energy System. [PhD thesis, Aarhus University]. Aarhus Universitet.

Schmiegel, J. & Pons, F. (2021). Stochastic Intermittency Fields in a von Karman Experiment. Symmetry, 13(9), Article 1752. https://doi.org/10.3390/sym13091752

Schäfer, K., Stroh, A., Forooghi, P. & Frohnapfel, B. (2022). Modelling spanwise heterogeneous roughness through a parametric forcing approach. Journal of Fluid Mechanics, 930, Article A7. https://doi.org/10.1017/jfm.2021.850

Sawant , M., Thakare, S., Rao, A. P., Feijóo Lorenzo, A. E. & Bokde, N. (2021). A Review on State-of-the-Art Reviews in Wind-Turbine- and Wind-Farm-Related Topics. Energies, 14(8), Article 2041. https://doi.org/10.3390/en14082041

Sanz-Cuadrado, C., Rahdan, P., Zhang, Z., Victoria, M. & Belén Cristóbal, A. (2024). A New Approach to Assess Individual Contributions to Energy Transition Goals.

Sanz Cuadrado, C., Cristóbal, A. B., Zhang, Z., Rahdan, P. & Victoria, M. (2022). Achieving a New European Energy Awareness (AURORA): Deliverable 1.1 – Near-Zero Emissions Citizens Label. https://www.aurora-h2020.eu/wp-content/uploads/2022/09/D1.1-Near-Zero-Emission-Citizens-Label-PU.pdf

Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Entrepreneurial thinking in engineering design education: a comparative study of cognitive paradigms with insights from industry and academia. Entrepreneurship Education. Advance online publication. https://doi.org/10.1007/s41959-025-00158-5

Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Identification of Skills for Entrepreneurial Thinking Using Natural Language Processing: An Exploration of Entrepreneurs, Faculties Members and Design Students. In A. Chakrabarti, V. Singh, P. S. Onkar & M. Shahid (Eds.), Responsible and Resilient Design for Society - Proceedings of ICoRD 2025 (Vol. 4, pp. 255-266). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-981-96-5495-6_20

Sandhu, K., Sarkar, P. & Karupppasamy, S. (2025). Understanding entrepreneurial thinking for designers: Perspectives from entrepreneurs, academicians, product designers, and students. Thinking Skills and Creativity, 56, Article 101728. https://doi.org/10.1016/j.tsc.2024.101728

Sandhu, K., Karupppasamy, S., Pal, M., Sarkar, P. & Singh, S. (Eds.) (2025). Footwear Innovation: From Conceptual Design through to Advanced Manufacturing Techniques. (1 ed.) Elsevier, Academic Press. https://doi.org/10.1016/C2023-0-52605-9

Sandberg, M., Hattel, J. H. & Spangenberg, J. (2023). Flow‑Induced Fibre Compaction in Resin‑Injection Pultrusion. Transport in Porous Media, 147(3), 541-571. https://doi.org/10.1007/s11242-023-01911-x

Sandberg, M., Hattel, J. H. & Spangenberg, J. (2022). A streamline-integration technique for simulating build-up of process-induced stresses and shape distortions in thermoset pultrusion processes.

Salavatidezfouli, S., Karstoft, H., Iosifidis, A. & Abkar, M. (2025). Dual guidance: Reduced-order model-informed field reconstruction with generative models. Physics of Fluids, 37(9), Article 093617. https://doi.org/10.1063/5.0285462

Displaying results 101 to 150 out of 520

3

Revised 22.02.2024

-

AU Engineering