Find

For students
For PhDs
For employees

Department of Mechanical and Production Engineering

Publications

Below you can find a complete list of the publications that are written by employees at the Publications at Department of Mechanical and Production Engineering for example journal articles, books, reports etc.

Publication list

Sort by: Date | Author | Title

Garg, H., Ledda, P. G., Skov Pedersen, J. & Pezzulla, M. (2024). Passive Viscous Flow Selection via Fluid-Induced Buckling. Physical Review Letters, 133(8), Article 084001. https://doi.org/10.1103/PhysRevLett.133.084001

Gao, X., Zhang, Y., Haahr-Lillevang, L., Vedel-Smith, N. K. & Andriollo, T. (2023). 3D strain pattern in additively manufactured AlSi10Mg from digital volume correlation. Heliyon, 9(12), Article e23186. https://doi.org/10.1016/j.heliyon.2023.e23186

Gallego-Castillo, C. & Victoria, M. (2025). PyPSA-Spain: An extension of PyPSA-Eur to model the Spanish energy system. Energy Strategy Reviews, 60, Article 101764. https://doi.org/10.1016/j.esr.2025.101764

Gad Kjeld, J., Avendaño-Valencia, L. D., Brandt, A., Christensen, S. S. & Karottki Falk Andersen, J. (2023). Towards minimal empirical uncertainty bounds of damping estimates of an offshore wind turbine in idling conditions. Mechanical Systems and Signal Processing, 191, Article 110180. https://doi.org/10.1016/j.ymssp.2023.110180

Fulco , S., Budzik, M. K. & Turner, K. (2022). Exploiting architected plasticity to enhance fracture toughness while maintaining strength. Abstract from 19th U.S. National Congress of Theoretical and Applied

Mechanics, Austin, Texas, United States. https://drive.google.com/file/d/1uyFLy4Pk62paHMze4hVJSe7VnknWq1hT/view

Fulco , S., Budzik, M. K., D. Bain , E. & T. Turner , K. (2022). Decoupling toughness and strength through architected plasticity. Extreme Mechanics Letters, 57, Article 101912. https://doi.org/10.1016/j.eml.2022.101912

Fulco , S., Budzik, M. K. & T. Turner , K. T. (2024). Enhancing toughness through geometric control of the process zone. Journal of the Mechanics and Physics of Solids, 184, Article 105548. https://doi.org/10.1016/j.jmps.2024.105548

Fulco, S., Budzik, M. K., Xiao, H., Durian, D. J. & Turner, K. T. (2025). Disorder enhances the fracture toughness of 2D mechanical metamaterials. PNAS Nexus, 4(2), Article pgaf023. https://doi.org/10.1093/pnasnexus/pgaf023

Friis, S. J., Strøm Hansen, T., Olesen, C. G., Poulsen, M., Gregersen, H. & Nygaard, J. V. (2025). Experimental and numerical study of solid needle insertions into human stomach tissue. Journal of the Mechanical Behavior of Biomedical Materials, 162, Article 106832. https://doi.org/10.1016/j.jmbbm.2024.106832

Frandsen, L. N., Kristensen, C. K., Haahr-Lillevang, L., Klingaa, C. G., Mohanty, S. & Pedersen, M. M. (2023). A method for developing predictive models of quality metrics and gas flow variables for 316L PBF-LB/M printed components based on image analysis. In C. Nisbet, D. Phillips & O. Riemer (Eds.), European Society for Precision Engineering and Nanotechnology, Conference Proceedings: Copenhagen 2023 (pp. 115-118). Euspen.

Formentini, G. & Ramanujan, D. (2023). Design for circular disassembly: Evaluating the impacts of product end-of-life status on circularity through the parent-action-child model. Journal of Cleaner Production, 405, Article 137009. https://doi.org/10.1016/j.jclepro.2023.137009

Formentini, G. & Ramanujan, D. (2023). Accounting For Product End-of-Life Status in Disassembly Time Estimation Using Modified Maynard Operation Sequences. Procedia CIRP, 116, 305-311. https://doi.org/10.1016/j.procir.2023.02.052

Formentini, G. & Ramanujan, D. (2023). EXAMINING THE ROLE AND FUTURE POTENTIAL OF DESIGN FOR DISASSEMBLY METHODS TO SUPPORT CIRCULAR PRODUCT DESIGN. Proceedings of the Design Society , 3, 1735 - 1744. https://doi.org/10.1017/pds.2023.174

Formentini, G., Martiny, T. A., Møller, C., Vernica, T. & Ramanujan, D. (2024). Assessing the disassembly performance of washing machines through the design for circular disassembly methodology. Proceedings of the Design Society , 4, 1249-1258. https://doi.org/10.1017/pds.2024.127

Formentini, G., Prioli, J. PJ., Ko, J., Hapuwatte, B., Ferrero, V., Badurdeen, F., Rickli, J. L. & Ramanujan, D. (2025). A review of disassembly systems for circular product design. Journal of Cleaner Production, 506, Article 145459. https://doi.org/10.1016/j.jclepro.2025.145459

Fontana, A., Sorlini, M., Leone, D., Rossi, L., Dell’Ambrogio, S., Nika, J., Koppelaar, R., Pamidi, S., Ramanujan, D. & Formentini, G. (2024). An Integrated Life Cycle Sustainability Assessment Framework for Product Life Cycle-Oriented Decision-Making. In A. I. I. Stefanakis & I. E. Nikolaou (Eds.), Circular Economy and Sustainable Development: A Necessary Nexus for a Sustainable Future (pp. 289–317). Springer. https://doi.org/10.1007/978-3-031-66007-8_17

Foldager, F. F., Thule, C., Balling, O. & Larsen, P. G. (2021). Towards a Digital Twin - Modelling an Agricultural Vehicle. In T. Margaria & B. Steffen (Eds.), Leveraging Applications of Formal Methods, Verification and Validation: 9th International Symposium on Leveraging Applications of Formal Methods, ISoLA 2020, Rhodes, Greece, October 20–30, 2020, Proceedings, Part IV (pp. 109-123). Springer. https://doi.org/10.1007/978-3-030-83723-5_8

Foldager, F., Munkholm, L. J., Balling, O., Serban, R., Negrut, D., Heck, R. J. & Green, O. (2022). Modeling soil aggregate fracture using the discrete element method. Soil and Tillage Research, 218, Article 105295. https://doi.org/10.1016/j.still.2021.105295

Foldager, F. (2021). Physics-based modeling and simulation of agricultural machine-soil interaction. Århus Universitet.

Filsoof, O. T., Yde, A., Bøttcher, P. & Zhang, X. (2020). Experimental Analysis of a Scaled-Down Vestas Four-Rotor Wind Turbine. Journal of Physics: Conference Series, 1618(3), Article 032005. https://doi.org/10.1088/1742-6596/1618/3/032005

Filsoof, O. T., Yde, A., Bøttcher, P. & Zhang, X. (2021). On critical aeroelastic modes of a tri-rotor wind turbine. International Journal of Mechanical Sciences, 204, Article 106525. https://doi.org/10.1016/j.ijmecsci.2021.106525

Filsoof, O. T. & Zhang, X. (2022). An intuitive representation and analysis of multi-rotor wind turbine whirling modes. Wind Energy, 25(3), 553-572. https://doi.org/10.1002/we.2686

Filsoof, O. T. (2021). Modal Dynamics and Design Analysis of Multi‐Rotor Wind Turbines. Århus Universitet.

Ferguson, O. V., Skovsgaard, S. P. H., Jensen, H. M. & Mikkelsen, L. P. (2023). Compressive strength prediction of carbon fiber-reinforced pultruded profiles including realistic volumetric fiber orientations. European Journal of Mechanics A - Solids, 104( Supplement), Article 105011. https://doi.org/10.1016/j.euromechsol.2023.105011

Feng, H., Gomes, C., Gil Arboleda, S., Mikkelsen, P. H., Tola, D., Larsen, P. G. & Sandberg, M. (2022). Integration Of The Mape-K Loop In Digital Twins. In C. R. Martin, N. Emami, M. J. Blas & R. Rezaee (Eds.), Proceedings of the 2022 Annual Modeling and Simulation Conference, ANNSIM (pp. 102-113). IEEE. https://doi.org/10.23919/ANNSIM55834.2022.9859489

Feng, H., Gomes, C., Sandberg, M., Thule, C., Lausdahl, K. & Larsen, P. G. (2021). Developing a Physical and Digital Twin: An Example Process Model. In Companion Proceedings - 24th International Conference on Model-Driven Engineering Languages and Systems, MODELS-C 2021 (pp. 286-295). IEEE. https://doi.org/10.1109/MODELS-C53483.2021.00050

Feng, H., Gomes, C., Sandberg, M., Macedo, H. D. & Larsen, P. G. (2022). Under What Conditions Does a Digital Shadow Track a Periodic Linear Physical System? In A. Cerone, M. Autili, A. Bucaioni, C. Gomes, P. Graziani, M. Palmieri, M. Temperini & G. Venture (Eds.), Software Engineering and Formal Methods. SEFM 2021 Collocated Workshops - CIFMA, CoSim-CPS, OpenCERT, ASYDE, Revised Selected Papers (pp. 143-155). Springer. https://doi.org/10.1007/978-3-031-12429-7_11

Farhadiyadkuri, F., Popal, A. M., Paiwand, S. S. & Zhang, X. (2022). Interaction dynamics modeling and adaptive impedance control of robotic exoskeleton for adolescent idiopathic scoliosis. Computers in Biology and Medicine, 145, Article 105495. https://doi.org/10.1016/j.compbiomed.2022.105495

Farhadiyadkuri, F. & Zhang, X. (2023). Novel Interaction Control in Adolescent Idiopathic Scoliosis Treatment Using a Robotic Brace. Journal of Intelligent and Robotic Systems: Theory and Applications, 109(3), Article 73. https://doi.org/10.1007/s10846-023-02010-1

Farhadiyadkuri, F. & Zhang, X. (2025). A Five-Dimensional Three-Layer Digital Twin to Train a Reinforcement Learning Agent for Interaction Control of a Robotic Exoskeleton in Adolescent Idiopathic Scoliosis Rehabilitation. International Journal of Mechanical System Dynamics. Advance online publication. https://doi.org/10.1002/msd2.70020

Farhadiyadkuri, F. (2022). Development of Robotic Brace for AIS Treatment: Interaction Dynamics and Control. Århus Universitet.

Farah, S. (2023). Investment-based optimisation of energy storage design parameters in a grid-connected hybrid renewable energy system. Poster session presented at 22nd Wind & Solar Integration Workshop, Lyngby, Denmark.

Farah, S. & Bruun Andresen, G. (2024). Investment-based optimisation of energy storage design parameters in a grid-connected hybrid renewable energy system. Applied Energy, 355, Article 122384. https://doi.org/10.1016/j.apenergy.2023.122384

Farah, S., Bokde, N. & Andresen, G. B. (2024). Cost and CO₂ emissions co-optimisation of green hydrogen production in a grid-connected renewable energy system. International Journal of Hydrogen Energy, 84, 164-176. https://doi.org/10.1016/j.ijhydene.2024.08.062

Farah, S. (2024). Green hydrogen production: cost and CO2 emissions co-optimisation. 172-176. Poster session presented at Aarhus Power-to-X Symposium 2024, Aarhus, Denmark. https://doi.org/10.1049/icp.2024.1834

Faldella, F., Kim, T., Doll, U. & Jansohn, P. (2024). Effect of pressure and H₂ content on global consumption-based turbulent flame speed at gas turbine relevant conditions. International Journal of Hydrogen Energy, 81, 842-851. https://doi.org/10.1016/j.ijhydene.2024.07.282

E. S. Chen, P., Bin, Y., I. A. Yang, X., Shi, Y., Abkar, M. & I. Park, G. (2023). A priori screening of data-enabled turbulence models. Physical Review Fluids, 8(12), Article 124606. https://doi.org/10.1103/PhysRevFluids.8.124606

Erenchun, A., Blanco, B., Gil-Negrete, N., Wang, B. & Kari, L. (2022). Effect of lubrication on the mechanical behavior of magnetorheological elastomers in compression mode. Polymer Testing, 111, Article 107617. https://doi.org/10.1016/j.polymertesting.2022.107617

Eidi, A., Ghiassi, R., Yang, X. I. A. & Abkar, M. (2021). Model-form uncertainty quantification in RANS simulations of wakes and power losses in wind farms. Renewable Energy, 179, 2212-2223. https://doi.org/10.1016/j.renene.2021.08.012

Eidi, A., Zehtabiyan-Rezaie, N., Chiassi, R., Yang, X. I. A. & Abkar, M. (2022). Data-driven quantification of model-form uncertainty in Reynolds-averaged simulations of wind farms. Physics of Fluids, 34(8), Article 085135. https://doi.org/10.1063/5.0100076

Eheliyagoda, D., Veluri, B., Ramanujan, D. & Liu, G. (2023). Examining three decades of global dysprosium supply chain through a material flow analysis. In First IRTC conference: Raw materials for a sustainable future (pp. 20)

Eheliyagoda, D., Ramanujan, D., Veluri, B., Liu, Q. & Liu, G. (2023). Tracing the multiregional evolution of the global dysprosium demand-supply chain. Resources, Conservation & Recycling, 199, Article 107245. https://doi.org/10.1016/j.resconrec.2023.107245

Eheliyagoda, D., Veluri, B., Liu, G. & Ramanujan, D. (2025). Unveiling the multiregional circular economy pathways for global dysprosium constraints. Resources, Conservation and Recycling, 215, Article 108121. https://doi.org/10.1016/j.resconrec.2024.108121

Efeoǧlu, A. & Moller, C. (2023). Redesigning design thinking for codesign with nondesigners: a method efficiency perspective. Design Science, 9, Article e14. https://doi.org/10.1017/dsj.2023.11

E.F. Athanasiadis, A., Budzik, M. K., Fernando, D. & Dias, M. A. (2024). On micropolar elastic foundations. European Journal of Mechanics A - Solids, 105, Article 105277. https://doi.org/10.1016/j.euromechsol.2024.105277

E.F. Athanasiadis, A., Duncan, O., Budzik, M. K. & Dias, M. A. (2025). Toughness of Confined Auxetic Foams. Advanced Engineering Materials. Advance online publication. https://doi.org/10.1002/adem.202500626

Dvorak, A. J. & Victoria, M. (2023). Key Determinants of Solar Share in Solar- and Wind-Driven Grids. IEEE Journal of Photovoltaics, 13(3), 476-483. https://doi.org/10.1109/JPHOTOV.2023.3252174

Durocher, H., Bachmann, C., Mozzillo, R., Janeschitz, G. & Zhang, X. (2025). A Spatial Five-Bar Linkage as a Tilting Joint of the Breeding Blanket Transporter for the Remote Maintenance of EU DEMO. Machines, 13(5), Article 371. https://doi.org/10.3390/machines13050371

Dues, M., Dues, F., Steinbock, J., Melnikov, S., Doll, U., Röhle, I., Migliorini, M. & K. Zachos, P. (2024). 2D3C Measurement Of Velocity, Pressure And Temperature Fields In A Intake Flow Of An Air Turbine By Filtered Rayleigh Sattering (FRS) And Validation With LDV And PIV. In 21th International Symposium on the Application of Laser and Imaging Techniques to Fluid Mechanics https://doi.org/10.55037/lxlaser.21st.21

Du, Y., Liu, Z. & Zhang, X. (2024). Advancing Locomotion Control of a Quadruped Robot: Harnessing Hybrid Control Algorithms and Digital Twin Technology. In 2024 10th International Conference on Automation, Robotics, and Applications, ICARA 2024 (pp. 144-149). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICARA60736.2024.10553027

Displaying results 301 to 350 out of 459

7

AU Engineering Profile

Download AU Engineering Profile 2013-2022:

Revised 22.02.2024

-

AU Engineering