Find

For students
For PhDs
For employees

Department of Mechanical and Production Engineering

Publications

Sort by: Date | Author | Title

Abbiati, G., Gomes, C., Sandberg, M., Kazemi, Z., Hansen, S. T. & Larsen, P. G. (2024). Modelling for Digital Twins. In J. Fitzgerald, C. Gomes & P. G. Larsen (Eds.), The Engineering of Digital Twins (pp. 89-127). Springer. https://doi.org/10.1007/978-3-031-66719-0_5

Oakes, B. J., Zhang, H., Hatledal, L. I., Feng, H., Frasheri, M., Sandberg, M., Gil Arboleda, S. & Gomes, C. (2024). Case Studies in Digital Twins. In J. Fitzgerald, C. Gomes & P. G. Larsen (Eds.), The Engineering of Digital Twins (pp. 257-310). Springer. https://doi.org/10.1007/978-3-031-66719-0_12

Šeta, B., Sandberg, M., Brander, M., Mollah, M. T., Pokkalla, D. K., Kumar, V. & Spangenberg, J. (2024). Numerical modeling of fiber orientation in multi-layer, isothermal material-extrusion big area additive manufacturing. Additive Manufacturing, 92, Article 104396. https://doi.org/10.1016/j.addma.2024.104396

Sandberg, M., Hattel, J. H. & Spangenberg, J. (2023). Flow‑Induced Fibre Compaction in Resin‑Injection Pultrusion. Transport in Porous Media, 147(3), 541-571. https://doi.org/10.1007/s11242-023-01911-x

Feng, H., Gomes, C., Gil Arboleda, S., Mikkelsen, P. H., Tola, D., Larsen, P. G. & Sandberg, M. (2022). Integration Of The Mape-K Loop In Digital Twins. In C. R. Martin, N. Emami, M. J. Blas & R. Rezaee (Eds.), Proceedings of the 2022 Annual Modeling and Simulation Conference, ANNSIM (pp. 102-113). IEEE. https://doi.org/10.23919/ANNSIM55834.2022.9859489

Feng, H., Gomes, C., Sandberg, M., Macedo, H. D. & Larsen, P. G. (2022). Under What Conditions Does a Digital Shadow Track a Periodic Linear Physical System? In A. Cerone, M. Autili, A. Bucaioni, C. Gomes, P. Graziani, M. Palmieri, M. Temperini & G. Venture (Eds.), Software Engineering and Formal Methods. SEFM 2021 Collocated Workshops - CIFMA, CoSim-CPS, OpenCERT, ASYDE, Revised Selected Papers (pp. 143-155). Springer. https://doi.org/10.1007/978-3-031-12429-7_11

Volk, M., Yuksel, O., Baran, I., Hattel, J. H., Spangenberg, J. & Sandberg, M. (2022). Cost-efficient, automated, and sustainable composite profile manufacture: A review of the state of the art, innovations, and future of pultrusion technologies. Composites Part B: Engineering, 246, Article 110135. https://doi.org/10.1016/j.compositesb.2022.110135

Zambrano, V., Mueller-Roemer, J., Sandberg, M., Talasila, P., Zanin, D., Larsen, P. G., Loeschner, E., Thronicke, W., Pietraroia, D., Landofi, G., Fontana, A., Laspalas, M., Antony, J., Poser, V., Kiss, T., Bergweiler, S., Pena Serna, S., Izquierdo, S., Viejo, I. ... Stork, A. (2022). Industrial Digitalization in the Industry 4.0 era: Classification, Reuse and Authoring of Digital Models on Digital Twin Platforms. Array, 14, Article 100176. https://doi.org/10.1016/j.array.2022.100176

Böttjer, T., Sandberg, M., Larsen, P. G. & Macedo, H. D. (2021). Modelling an Injection Moulding Machine using the Vienna Development Method. In H. D. Macedo, C. Thule & K. Pierce (Eds.), Proceedings of the 19th International Overture Workshop (pp. 51-65) https://arxiv.org/abs/2110.09371

Feng, H., Gomes, C., Sandberg, M., Thule, C., Lausdahl, K. & Larsen, P. G. (2021). Developing a Physical and Digital Twin: An Example Process Model. In Companion Proceedings - 24th International Conference on Model-Driven Engineering Languages and Systems, MODELS-C 2021 (pp. 286-295). IEEE. https://doi.org/10.1109/MODELS-C53483.2021.00050

Feng, H., Gomes, C., Thule, C., Lausdahl, K., Sandberg, M. & Larsen, P. G. (2021). The Incubator Case Study for Digital Twin Engineering. ArXiv. https://arxiv.org/pdf/2102.10390.pdf

Sandberg, M., Yuksel, O., Baran, I., Hattel, J. H. & Spangenberg, J. (2021). Numerical and experimental analysis of resin-flow, heat-transfer, and cure in a resin-injection pultrusion process. Composites Part A: Applied Science and Manufacturing, 143, Article 106231. https://doi.org/10.1016/j.compositesa.2020.106231

Sandberg, M., Yuksel, O., Baran, I., Spangenberg, J. & Hattel, J. H. (2021). Steady-state modelling and analysis of process-induced stress and deformation in thermoset pultrusion processes. Composites Part B: Engineering, 216, Article 108812. https://doi.org/10.1016/j.compositesb.2021.108812

Yuksel, O., Sandberg, M., Baran, I., Ersoy, N., Hattel, J. H. & Akkerman, R. (2021). Material characterization of a pultrusion specific and highly reactive polyurethane resin system: Elastic modulus, rheology, and reaction kinetics. Composites Part B: Engineering, 207, Article 108543. https://doi.org/10.1016/j.compositesb.2020.108543

Yuksel, O., Sandberg, M., Hattel, J. H., Akkerman, R. & Baran, I. (2021). Mesoscale Process Modeling of a Thick Pultruded Composite with Variability in Fiber Volume Fraction. Materials, 14(13), Article 3763. https://doi.org/10.3390/ma14133763

Salling, F. B., Sandberg, M., Spangenberg, J. & Hattel, J. H. (2020). Numerical and experimental analyses in composites processing: impregnation, heat transfer, resin cure and residual stresses. IOP Conference Series-Materials Science and Engineering, 942(1), Article 012003. https://doi.org/10.1088/1757-899X/942/1/012003

Sandberg, M., Yuksel, O., Comminal, R. B., Sonne, M. R., Jabbari, M., Bo Salling, F., Baran, I., Spangenberg, J. & Hattel, J. H. (2020). Numerical modeling of the mechanics of pultrusion. In Mechanics of Materials in Modern Manufacturing Methods and Processing Techniques: Elsevier Series in Mechanics of Advanced Materials (pp. 173-195). Elsevier. https://doi.org/10.1016/B978-0-12-818232-1.00006-0

Sandberg, M. (2020). Numerical Modelling of Material Flow in the Resin-injection Pultrusion Process. Technical University of Denmark. https://orbit.dtu.dk/en/publications/numerical-modelling-of-material-flow-in-the-resin-injection-pultr

Sandberg, M., Kabachi, A., Volk, M., Bo Salling, F., Ermanni, P., Hattel, J. H. & Spangenberg, J. (2020). Permeability and compaction behaviour of air-texturised glass fibre rovings: A characterisation study. Journal of Composite Materials, 54(27), 4241-4252. https://doi.org/10.1177/0021998320926703

Sandberg, M., Hattel, J. H. & Spangenberg, J. (2019). Simulation of liquid composite moulding using a finite volume scheme and the level-set method. International Journal of Multiphase Flow, 118, 183-192. https://doi.org/10.1016/j.ijmultiphaseflow.2019.06.014

Sandberg, M., Rasmussen, F. S., Hattel, J. H. & Spangenberg, J. (2019). Simulation of resin-impregnation, heat-transfer and cure in a resin-injection pultrusion process. AIP Conference Proceedings, 2113(1). https://doi.org/10.1063/1.5112527

Sandberg, M., Tse, K. M., Tan, L. B. & Lee, H. P. (2018). A computational study of the EN 1078 impact test for bicycle helmets using a realistic subject-specific finite element head model. Computer Methods in Biomechanics and Biomedical Engineering, 21(12), 684-692. https://doi.org/10.1080/10255842.2018.1511775

Sandberg, M., Hattel, J. H. & Spangenberg, J. (2018). Numerical modelling and optimisation of fibre wet-out in resin-injection pultrusion processes. In 18th European Conference on Composite Materials (ECCM-18) Applied Mechanics Laboratory.

Revised 19.12.2023

-

Michael Sandberg