Publications

Below you can find a complete list of the publications that are written by employees at the Publications at Department of Mechanical and Production Engineering for example journal articles, books, reports etc.

Publication list

Sort by: Date | Author | Title

Yang, J., Stroh, A., Bagheri, S., Frohnapfel, B. & Forooghi, P. (2025). Characterization of hydrodynamic and thermal properties of anisotropic irregular roughness. International Journal of Heat and Fluid Flow, 116, Article 109888. https://doi.org/10.1016/j.ijheatfluidflow.2025.109888

Kabachi, M. A., Sandberg, M. & Ermanni, P. (2025). Combined experimental–numerical approach for through-thickness unsaturated permeability characterization of deformable fiber-beds. Composite Structures, 371, Article 119396. https://doi.org/10.1016/j.compstruct.2025.119396

Li, W., Wu, S., Zhu, J., Zhang, L., Zheng, J., Wang, H., Qiu, Y., Xie, G. & Li, C. (2025). Constitutive modelling of time-dependent polymer matrix composites: Incorporating a visco-hyperelastic model into the micromechanical framework. Composite Structures, 366, Article 119220. https://doi.org/10.1016/j.compstruct.2025.119220

Li, J., Zhou, X., Brochu, M., Chekir, N., Sixsmith, J. J. & Zhao, Y. F. (2025). Crystal introducing mechanism in laser wire directed energy deposition fabricated Ti6Al4V. Progress in Additive Manufacturing, 10(2), 1231-1241. https://doi.org/10.1007/s40964-024-00701-1

Li, X., Cheng, Y., Møller, C. & Lee, J. (2025). Data issues in industrial AI systems: A meta-review and research strategy. Computers in Industry, 173, Article 104361. https://doi.org/10.1016/j.compind.2025.104361

Hu, P., Li, S. & Budzik, M. K. (2025). Decoupling fracture energy from crack area via surface patterning. Surfaces and Interfaces, 62, Article 106066. https://doi.org/10.1016/j.surfin.2025.106066

Cristóbal, A. B., Sanz-Cuadrado, C., Zhang, Z., Victoria, M., Fialho, L., Cavaco, A., Bokalič, M. & Narvarte, L. (2025). Delving into the modeling and operation of energy communities as epicenters for systemic transformations. Universal Access in the Information Society, 24(3), 2007-2023. https://doi.org/10.1007/s10209-023-01056-0

He, L., Wang, C., Zhang, M., Li, J., Chen, T. & Zhou, X. (2025). Design of BCC/FCC dual-solid solution refractory high-entropy alloys through CALPHAD, machine learning and experimental methods. npj Computational Materials, 11(1), Article 105. https://doi.org/10.1038/s41524-025-01597-3

Djeffal, S., Ghoul, A., Saadi, A., Izri, Z., Morakchi, M. R. & Wang, H. (2025). Design optimization and simulation of a 3D printed cable-driven continuum robot using IKM-ANN and nTop software. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 239(2), 200-218. https://doi.org/10.1177/09596518241276233

Fulco, S., Budzik, M. K., Xiao, H., Durian, D. J. & Turner, K. T. (2025). Disorder enhances the fracture toughness of 2D mechanical metamaterials. PNAS Nexus, 4(2), Article pgaf023. https://doi.org/10.1093/pnasnexus/pgaf023

Nozarian, S. (2025). Drag Prediction and Modification in Smooth- and Rough-Wall-Bounded Turbulent Flows. [PhD dissertation, Aarhus University].

Sodha, V., Airao, J. & Khanna, N. (2025). Driving Sustainability for the cutting tools in drilling process. In ASME 2025 International Mechanical Engineering Congress and Exposition - India: Volume 2: Advanced Materials and Manufacturing Technologies American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/IMECE-INDIA2025-159308

Salavatidezfouli, S., Karstoft, H., Iosifidis, A. & Abkar, M. (2025). Dual guidance: Reduced-order model-informed field reconstruction with generative models. Physics of Fluids, 37(9), Article 093617. https://doi.org/10.1063/5.0285462

Fristed, F., Tønning, S., Xie, Z., Langer, L. & Bruun Andresen, G. (2025). Early cross-sector decarbonisation for Europe's hard-to-abate sectors: Insights from Denmark's 2030 target. Applied Energy, 401(Part A), Article 126568. https://doi.org/10.1016/j.apenergy.2025.126568

Pimentel de Figueiredo, R., Limberg, C., Jamone, L. & Bernardino, A. (2025). Editorial: Computer vision mechanisms for resource-constrained robotics applications. Frontiers in Robotics and AI, 12, Article 1680098. https://doi.org/10.3389/frobt.2025.1680098

Movassagh-Alanagh, F., Abdollah-Zadeh, A. & Aghababaei, R. (2025). Effects of B and C elements on microstructure, mechanical and tribological properties of TiN coating deposited by PACVD. Materials Characterization, 225, Article 115178. https://doi.org/10.1016/j.matchar.2025.115178

Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Efficient continuum-based modelling and analysis of polymer SLS: Insights into particle sintering and densification in straight and corner scanning passes. Additive Manufacturing, 109, Article 104828. https://doi.org/10.1016/j.addma.2025.104828

Hund, J., Kouznetsova, V. & Andriollo, T. (2025). Efficient prediction of strength and strain localisation in porous solids via microstructure-based limit analysis. Mechanics of Materials, 201, Article 105208. https://doi.org/10.1016/j.mechmat.2024.105208

Tcherniak, D., Talasila, P., Ulriksen, M. D., Abbiati, G., Mahato, S. & Jensen, A. M. D. (2025). Efficient system identification, model updating, and virtual sensing in the Digital-Twin-as-a-Service software platform. In M. Dohler, A. Melot & M. A. Lopez (Eds.), Proceedings of the 11th International Operational Modal Analysis Conference, IOMAC 2025 (pp. 271-279). International Operational Modal Analysis Conference (IOMAC). https://iomac2025.sciencesconf.org/596439/document

Ulriksen, M. D. & Bernal, D. (2025). Eigenstructure Assignment in Stochastic Systems Based on Virtual Output Feedback. In Á. Cunha & E. Caetano (Eds.), Experimental Vibration Analysis for Civil Engineering Structures, EVACES 2025 - Volume 1 (pp. 483-490). Springer. https://doi.org/10.1007/978-3-031-96110-6_46

Kalweit, S., Zeyen, E. & Victoria, M. (2025). Endogenous transformation of land transport in Europe for different climate targets. Energy Conversion and Management, 344, Article 120203. https://doi.org/10.1016/j.enconman.2025.120203

Islam, R., Madsen, S. P. & Christensen, M. (2025). Enhancing magnetocrystalline anisotropy in W-type SrFe₁₈O₂₇ hexaferrite via tailored substitutions. Acta Materialia, 288, 120828. Article 120828. https://doi.org/10.1016/j.actamat.2025.120828

Ghoul, A., Djeffal, S., Wang, H., Kara, K. & Hadjili, M. L. (2025). Enhancing Surgical Robotics: A Dynamic Model and Optimized Control Strategy for Cable-Driven Continuum Robots. Journal of Mechanisms and Robotics, 17(2), Article 021002. https://doi.org/10.1115/1.4065698

Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Entrepreneurial thinking in engineering design education: a comparative study of cognitive paradigms with insights from industry and academia. Entrepreneurship Education. Advance online publication. https://doi.org/10.1007/s41959-025-00158-5

Langthjem, M. A. & Jensen, H. M. (2025). Erratum to: On matched asymptotic expansion solutions of a bucklewave propagation problem (ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, (2024), 104, 5, 10.1002/zamm.202300655). Zeitschrift fuer Angewandte Mathematik und Mechanik, 105(5), Article e70095. https://doi.org/10.1002/zamm.70095

Jensen, J. S. K., Esmizadeh, S., Lund, M., Juhl, J., Nemati, N. & Aghababaei, R. (2025). Evaluating the effect of particle roundness on three-body wear between polymers and metals. Wear, 570, Article 206000. https://doi.org/10.1016/j.wear.2025.206000

Mikropoulos, E., Roelfsema, M., Chen, H. H., Staffell, I., Oreggioni, G., Hdidouan, D., Thellufsen, J. Z., Chang, M. A., Fragkos, P., Giannousakis, A., Chatterjee, S., Ürge-Vorsatz, D., Pfenninger, S., Pickering, B., Victoria, M., Brown, T. & van Vuuren, D. P. (2025). Examining pathways for a climate neutral Europe by 2050: A model comparison analysis including integrated assessment models and energy system models. Energy, 319, Article 134809. https://doi.org/10.1016/j.energy.2025.134809

Friis, S. J., Strøm Hansen, T., Olesen, C. G., Poulsen, M., Gregersen, H. & Nygaard, J. V. (2025). Experimental and numerical study of solid needle insertions into human stomach tissue. Journal of the Mechanical Behavior of Biomedical Materials, 162, Article 106832. https://doi.org/10.1016/j.jmbbm.2024.106832

Bricalli, R., Zehtabiyan-Rezaie, N., Doll, U., Olesen, T. R. & Abkar, M. (2025). Experimental investigation of gas-bubble formation due to supersaturation in a plate heat exchanger. In Proceedings of the ASME 2025 Fluids Engineering Division Summer Meeting. Volume 2: Multiphase Flows Applications; Fluids Applications; Microfluidics; Fluids Mechanics Fundamentals; Fluids Engineering Education Article V002T07A004 American Society of Mechanical Engineers(ASME). https://doi.org/10.1115/FEDSM2025-156356

Clarin, M., Hultgren, G., Mansour, R., Narström, T. & Barsoum, Z. (2025). Experimental investigation of the preloading effect on S960 non-load carrying circular flat studs. Procedia Structural Integrity, 75, 467-473. https://doi.org/10.1016/j.prostr.2025.11.047

Wu, Z., Englyst, L. & Møller, C. (2025). Exploring adjustment mechanisms in the sales and operations planning process: an industrial case study. International Journal of Operations and Production Management, 45(11), 1937–1966. https://doi.org/10.1108/IJOPM-05-2024-0378

Kunrath, K. & Ramanujan, D. (2025). Exploring Participatory Approaches for Facilitating ESG Initiatives in Organizations. In EcoDesign for Circular Value Creation: Volume I (pp. 293-311). Springer. Advance online publication. https://doi.org/10.1007/978-981-97-9068-5_19

Bisoyi, S., Rathi, A. K. & Mahato, S. (2025). Fault diagnosis of rolling bearing failures using a multi-stage e-CNN-GRU-SAM network. Scientific Reports, 15(1), Article 33102. https://doi.org/10.1038/s41598-025-17008-y

Vernica, T., Veluri, B. & Ramanujan, D. (2025). Feature-centric allocation and visualization of primary manufacturing process life cycle inventory data. Journal of Manufacturing Systems, 83, 557-576. https://doi.org/10.1016/j.jmsy.2025.10.006

Fuentes, J., Guix, M., Cenev, Z. M., Bakenecker, A. C., Ruiz-González, N., Beaune, G., Timonen, J. V. I., Sanchez, S. & Magdanz, V. (2025). Ferrofluid-Based Bioink for 3D Printed Skeletal Muscle Tissues with Enhanced Force and Magnetic Response. Advanced Materials Interfaces, 12(13), Article 2400824. https://doi.org/10.1002/admi.202400824

Geckeler, C., Kirchgeorg, S., Strunk, G., Thostrup, F. B., Sangermano, F., Desiderato, A., Lüthi, M., Jucker, M., Gonzalez Herrera, M. A., Franco-Sierra, N. D., Pulido-Santacruz, P., Marc Chang, J. J., Aden Ip, Y. C., Mächler, E., Svenning, A., Mougeot, G., Høye, T. T., Fopp, F., Pellissier, L. ... Mintchev, S. (2025). Field Deployment of BiodivX Drones in the Amazon Rainforest for Biodiversity Monitoring. IEEE Transactions on Field Robotics, 2, 336-352. https://doi.org/10.1109/TFR.2025.3574945

Hesse, N., Strack, D., Rischewski, J. F., Gassert, F. T., Kufner, A., Urban, T., Lochschmidt, M. E., Schwaiger, B. J., Braun, C., Mueller, D. P., Pfeiffer, D., Baum, T., Subburaj, K., Pfeiffer, F. & Gersing, A. S. (2025). Finite element fracture load analysis and dark-field X-ray imaging of osteoporotic and healthy vertebrae in human lumbar spine specimens. BMC Musculoskeletal Disorders, 26(1), Article 545. https://doi.org/10.1186/s12891-025-08709-6

Gøtske, E. K., Pratama, Y., Andresen, G. B., Gidden, M. J., Victoria, M. & Zakeri, B. (2025). First steps towards bridging integrated assessment modeling and high-resolution energy system models: a scenario matrix for a low-emissions sector-coupled European energy system. Environmental Research Communications, 7(8), Article 085010. https://doi.org/10.1088/2515-7620/adf60d

Ledda, P. G., Garg, H., Østergaard-Clausen, V., Rudzki, L. K., Madary, A. & Pezzulla, M. (2025). Fluid-induced snap-through instability of spherical shells. Physical Review Letters, 135, Article 234002. https://doi.org/10.1103/ltqy-d53p

Sandhu, K., Karupppasamy, S., Pal, M., Sarkar, P. & Singh, S. (Eds.) (2025). Footwear Innovation: From Conceptual Design through to Advanced Manufacturing Techniques. (1 ed.) Elsevier, Academic Press. https://doi.org/10.1016/C2023-0-52605-9

Tarpø, M. G., Ulriksen, M. D., Augustyn, D., Dollerup, N., Caglio, L. & Sørensen, J. D. (2025). Full-field stress estimation of offshore structures using modal expansion and principal component analysis. Journal of Sound and Vibration, 618(Part B), Article 119295. https://doi.org/10.1016/j.jsv.2025.119295

Vernica, T. (2025). Geometry-Centric Life Cycle Data Mapping and Visualization for Sustainable Product Design. [PhD dissertation, Aarhus University].

Taylor, A. P., Vankayalapati, G. S., Budzik, M. K. & Turner, K. T. (2025). Hinged Rigid Beam Fracture Specimen for Characterization of Lattice and Thin-Sheet Materials. Experimental Mechanics, 65(9), 1375–1386. https://doi.org/10.1007/s11340-025-01214-w

Bontempi, L., Zattoni, M., Ramella, A., Migliavacca, F., Ringgaard, S., Kim, W. Y., Johansen, P. & Colombo, M. (2025). Idealized aortic annuloplasty FSI digital twin of 3D-printed phantoms with 4D-flow MRI comparison. Computers in Biology and Medicine, 192, Article 110398. https://doi.org/10.1016/j.compbiomed.2025.110398

Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Identification of Skills for Entrepreneurial Thinking Using Natural Language Processing: An Exploration of Entrepreneurs, Faculties Members and Design Students. In A. Chakrabarti, V. Singh, P. S. Onkar & M. Shahid (Eds.), Responsible and Resilient Design for Society - Proceedings of ICoRD 2025 (Vol. 4, pp. 255-266). Springer Science+Business Media. https://doi.org/10.1007/978-981-96-5495-6_20

Truong, T. T., Airao, J., Fattahi, S., Azarhoushang, B., Karras, P. & Aghababaei, R. (2025). Image-based machine learning model for tool wear estimation in milling Inconel 718. Wear, 571, Article 205865. https://doi.org/10.1016/j.wear.2025.205865

Bernal, D., Brandt, A. & Ulriksen, M. D. (2025). Improved Consistency on a Common Virtual Sensing Scheme. Abstract from IMAC XLIII, Orlando, Florida, United States.

Mansour, R., Enblom, P., Subasic, M., Ireland, A., Gustavsson, F., Forssgren, B. & Efsing, P. (2025). Influence of temperature-dependent viscoplastic relaxation and strain-induced martensitic transformation on the fatigue life of 304L stainless steel. International Journal of Fatigue, 198, Article 108992. https://doi.org/10.1016/j.ijfatigue.2025.108992

Aher, G., Sandberg, M., Boudjadar, J. & Ramanujan, D. (2025). Informing circularity-focused design optimization using parametric life-cycle engineering simulation models. Smart and Sustainable Manufacturing Systems, 9(1), 11-36. https://doi.org/10.1520/SSMS20240018

Strack, D., Mesbah, M., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2025). Interpatient variability and validation of simplified L4-L5 Finite Element Model. Abstract from The XXX Congress of the International Society of Biomechanics , Stockholm, Sweden. https://www.researchgate.net/publication/395188992_Interpatient_variability_and_validation_of_simplified_L4-L5_Finite_Element_Model

Displaying results 51 to 100 out of 561

Revised 22.02.2024

AU Engineering