Publications

Below you can find a complete list of the publications that are written by employees at the Publications at Department of Mechanical and Production Engineering for example journal articles, books, reports etc.

Publication list

Sort by: Date | Author | Title

Aliana, A., Chang, M., Østergaard, P. A., Victoria, M. & Andersen, A. N. (2022). Performance assessment of using various solar radiation data in modelling large-scale solar thermal systems integrated in district heating networks. Renewable Energy, 190, 699-712. https://doi.org/10.1016/j.renene.2022.03.163

Darki, A. A., Madsen, S. P. & Dantan, A. R. (2022). Polarization-independent optical spatial differentiation with a doubly-resonant one-dimensional guided-mode grating. Optics Express, 30(3), 3962-3972. https://doi.org/10.1364/OE.450981

Lee, S., Yang, J., Forooghi, P., Stroh, A. & Bagheri, S. (2022). Predicting drag on rough surfaces by transfer learning of empirical correlations. Journal of Fluid Mechanics, 933, Article A18. https://doi.org/10.1017/jfm.2021.1041

Schwenk-Nebbe, L. J., Vind, J. E., Backhaus, A. J., Victoria, M. & Greiner, M. (2022). Principal spatiotemporal mismatch and electricity price patterns in a highly decarbonized networked European power system. iScience, 25(6), Article 104380. https://doi.org/10.1016/j.isci.2022.104380

Langthjem, M. A. & Jensen, H. M. (2022). Propagating buckles in undersea pipelines – A model problem. International Journal of Solids and Structures, 257, Article 111555. https://doi.org/10.1016/j.ijsolstr.2022.111555

Gautam, K. R., Bruun Andresen, G. & Victoria, M. (2022). Review and Techno-Economic Analysis of Emerging Thermo-Mechanical Energy Storage Technologies. Energies, 15(17), Article 6328. https://doi.org/10.3390/en15176328

Amarloo, A., Forooghi, P. & Abkar, M. (2022). Secondary flows in statistically unstable turbulent boundary layers with spanwise heterogeneous roughness. Theoretical and Applied Mechanics Letters, 12(2), Article 100317. https://doi.org/10.1016/j.taml.2021.100317

Victoria, M., Zeyen, E. & Brown, T. (2022). Speed of technological transformations required in Europe to achieve different climate goals. Joule, 6(5), 1066-1086. https://doi.org/10.1016/j.joule.2022.04.016

Budzik, M. K., Wolfahrt, M., Reis, P., Kozłowski, M., Sena-Cruz, J., Papadakis, L., Nasr Saleh, M., V. Machalicka, K., Teixeira de Freitas, S. & P. Vassilopoulos, A. (2022). Testing mechanical performance of adhesively bonded composite joints in engineering applications: an overview. The Journal of Adhesion, 98(14), 2133-2209. https://doi.org/10.1080/00218464.2021.1953479

Si, G., Ding, M., Zhang, Z. & Zhang, X. (2022). Theoretical thermal-mechanical modelling and experimental validation of a novel 3D three-fingered electrothermal microgripper. Precision Engineering, 77, 205-219. https://doi.org/10.1016/j.precisioneng.2022.05.013

Heide-Jørgensen, S., Budzik, M. K. & Ibsen, C. H. (2022). Three-dimensional, multiscale homogenization for hybrid woven composites with fiber-matrix debonding. Composites Science and Technology, 218, Article 109204. https://doi.org/10.1016/j.compscitech.2021.109204

Mirzaiee, R., Vernica, T., Scheuringer, K. & Bernstein, W. Z. (2022). Towards Retargetable Animations for Industrial Augmented Reality. In Proceedings - 2022 IEEE Conference on Virtual Reality and 3D User Interfaces Abstracts and Workshops, VRW 2022 (pp. 872-873). IEEE. https://doi.org/10.1109/VRW55335.2022.00287

Si, G., Zhou, F., Zhang, Z. & Zhang, X. (2022). Tracking Multiple Zebrafish Larvae Using YOLOv5 and DeepSORT. In 2022 8th International Conference on Automation, Robotics and Applications, ICARA 2022 (pp. 228-232). IEEE. https://doi.org/10.1109/ICARA55094.2022.9738556

Rincón, M. J., Reclari, M. & Abkar, M. (2022). Turbulent flow in small-diameter ultrasonic flow meters: A numerical and experimental study. Flow Measurement and Instrumentation, 87, Article 102227. https://doi.org/10.1016/j.flowmeasinst.2022.102227

Feng, H., Gomes, C., Sandberg, M., Macedo, H. D. & Larsen, P. G. (2022). Under What Conditions Does a Digital Shadow Track a Periodic Linear Physical System? In A. Cerone, M. Autili, A. Bucaioni, C. Gomes, P. Graziani, M. Palmieri, M. Temperini & G. Venture (Eds.), Software Engineering and Formal Methods. SEFM 2021 Collocated Workshops - CIFMA, CoSim-CPS, OpenCERT, ASYDE, Revised Selected Papers (pp. 143-155). Springer. https://doi.org/10.1007/978-3-031-12429-7_11

Shehab, E., Meiirbekov, A., Amantayeva, A., Suleimen, A., Tokbolat, S. & Sarfraz, S. (2021). A cost modelling system for recycling carbon fiber-reinforced composites. Polymers, 13(23), Article 4208. https://doi.org/10.3390/polym13234208

Shehab, E., Meiirbekov, A., Amantayeva, A., Suleimen, A., Tokbolat, S., Sarfraz, S. & Ali, M. H. (2021). A fuzzy logic-based cost modelling system for recycling carbon fibre reinforced composites. Polymers, 13(24), Article 4370. https://doi.org/10.3390/polym13244370

Abu-Ghaida, H. & Kamari, A. (2021). An alternative approach to material and EPD mapping in the development of BIM-based LCA and LCC tools. In Proceedings of the 38th International Conference of CIB W78, Luxembourg, 13-15 October: Joint Conference CIB W78 - LDAC 2021 (pp. 782-792). Article 78. http://itc.scix.net/paper/w78-2021-paper-078

Zhao, L., Su, L., Cui, N., Zhang, Z. & Zhang, X. (2021). A Nonlinear Mechanic Model of a Zebrafish Embryo under Microinjection. In CCRIS'21 - 2021 2nd International Conference on Control, Robotics and Intelligent System (pp. 66-70). Association for Computing Machinery. https://doi.org/10.1145/3483845.3483895

Glisic, M., Veluri, B. & Ramanujan, D. (2021). A Reusable Unit Process Life Cycle Inventory Model for Infeed Centerless Grinding. In 26th Design for Manufacturing and the Life Cycle Conference (DFMLC): 26th Design for Manufacturing and the Life Cycle Conference (DFMLC) (Vol. 5). Article DETC2021-69609, V005T05A025 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2021-69609

Sawant , M., Thakare, S., Rao, A. P., Feijóo Lorenzo, A. E. & Bokde, N. (2021). A Review on State-of-the-Art Reviews in Wind-Turbine- and Wind-Farm-Related Topics. Energies, 14(8), Article 2041. https://doi.org/10.3390/en14082041

Li, L., Wang, R. & Zhang, X. (2021). A Tutorial Review on Point Cloud Registrations: Principle, Classification, Comparison, and Technology Challenges. Mathematical Problems in Engineering, 2021, Article 9953910. https://doi.org/10.1155/2021/9953910

Balling, O., Jeppesen, M. R. & Madsen, S. A. (2021). Autonomous vehicle assessment framework. In Proceedings of the Ground Vehicle Systems Engineering and Technology Symposium (GVSETS)

Athanasiadis, A., Dias, M. & Budzik, M. K. (2021). Can confined mechanical metamaterials replace adhesives? Extreme Mechanics Letters, 48, Article 101411. https://doi.org/10.1016/j.eml.2021.101411

Vallerotto, G., Victoria, M., Jost, N., Askins, S., Dominguez, C., Herrero, R. & Anton, I. (2021). Comparison of achromatic doublet on glass Fresnel lenses for concentrator photovoltaics. Optics Express, 29(13), 20601-20616. https://doi.org/10.1364/OE.428160

Bibbo, N., Arora, V. & Pedersen, M. M. (2021). Comparison of Findley and MWCM multiaxial fatigue methods using the notch stress method on welded joints. In Procedia Structural Integrity (Vol. 31, pp. 75-79). Elsevier. https://doi.org/10.1016/j.prostr.2021.03.012

Matsuura, K., Mukai, K. & Langthjem, M. A. (2021). Computational and experimental study on ring tone. In S. Hernández & A. Coruña (Eds.), Advances in Fluid Dynamics with emphasis on Multiphase and Complex Flow (pp. 141-151). WIT Press. https://doi.org/10.2495/MPF210121

Budzik, M. K., Athanasiadis, A. & Dias, M. A. (2021). Confined mechanical metamaterials under fracture loading. Abstract from 6TH INTERNATIONAL CONFERENCE ON ADHESIVE BONDING 2021, Porto, Portugal.

Aghababaei, R., Malekan, M. & Budzik, M. (2021). Cutting Depth Dictates the Transition from Continuous to Segmented Chip Formation. Physical Review Letters, 127(23), Article A202. https://doi.org/10.1103/PhysRevLett.127.235502

Malekan, M., Bloch-Jensen, C. D., Zolbin, M. A., Ørskov, K. B., Jensen, H. M. & Aghababaei, R. (2021). Cutting edge wear in high-speed stainless steel end milling. International Journal of Advanced Manufacturing Technology, 114(9-10), 2911-2928. https://doi.org/10.1007/s00170-021-07006-5

Böttjer, T., Ørnskov Rønsch, G., Gonçalves Gomes, C. Â., Ramanujan, D., Iosifidis, A. & Larsen, P. G. (2021). Data-Driven Identification of Remaining Useful Life for Plastic Injection Moulds. In A.-L. Andersen, R. Andersen, D. Brunoe, M. Stoettrup Schioenning Larsen, K. Nielsen, A. Napoleone & S. Kjeldgaard (Eds.), Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems: Proceedings of the Changeable, Agile, Reconﬁgurable and Virtual Production Conference and the World Mass Customization & Personalization Conference (pp. 431-439). Springer. https://www.springerprofessional.de/en/data-driven-identification-of-remaining-useful-life-for-plastic-/19816878

Schwenk-Nebbe, L. J., Victoria, M. & Bruun Andresen, G. (2021). Dataset: A proxy for historical CO2 emissions related to centralised electricity generation in Europe. Data in Brief, 36, Article 107016. https://doi.org/10.1016/j.dib.2021.107016

Zhou, Z., Li, L. & Zhang, X. (2021). Deep Learning on 3D Object Detection for Automatic Plug-in Charging Using a Mobile Manipulator. In 2021 IEEE International Conference on Robotics and Automation (ICRA) (pp. 4148-4154). IEEE. https://doi.org/10.1109/ICRA48506.2021.9561106

Si, G., Sun, L., Zhang, Z. & Zhang, X. (2021). Design, Fabrication, and Testing of a Novel 3D 3-Fingered Electrothermal Microgripper with Multiple Degrees of Freedom. Micromachines, 12(4), Article 444. https://doi.org/10.3390/mi12040444

D. Huang, X. L. ., Jain, N., Abkar, M., Kunz, R. F. & Yang, X. I. A. (2021). Determining a priori a RANS model’s applicable range via global epistemic uncertainty quantification. Computers & Fluids, 230, Article 105113. https://doi.org/10.1016/j.compfluid.2021.105113

Feng, H., Gomes, C., Sandberg, M., Thule, C., Lausdahl, K. & Larsen, P. G. (2021). Developing a Physical and Digital Twin: An Example Process Model. In Companion Proceedings - 24th International Conference on Model-Driven Engineering Languages and Systems, MODELS-C 2021 (pp. 286-295). IEEE. https://doi.org/10.1109/MODELS-C53483.2021.00050

Budzik, M. K., Lopes Fernandes, R., Teixeira de Freitas, S., Heide-Jørgensen, S. & Jumel, J. (2021). Effect of adhesive thickness on joint performance during mode I fracture testing. Abstract from 6TH INTERNATIONAL CONFERENCE ON ADHESIVE BONDING 2021, Porto, Portugal.

Tapetado, P., Victoria, M., Greiner, M. & Usaola, J. (2021). Exploring backup requirements to complement wind, solar and hydro generation in a highly renewable Spanish power system. Energy Strategy Reviews, 38, Article 100729. https://doi.org/10.1016/j.esr.2021.100729

Pedersen, T. T., Victoria, M., Rasmussen, M. G. & Bruun Andresen, G. (2021). Exploring flexibility of near-optimal solutions to highly renewable energy systems. Abstract from 48th IEEE Photovoltaic Specialists Conference (PVSC).

Pedersen, T. T., Victoria, M., Rasmussen, M. G. & Andresen, G. B. (2021). Exploring flexibility of near-optimal solutions to highly renewable energy systems. In 2021 IEEE 48th Photovoltaic Specialists Conference, PVSC 2021 (pp. 387-391). IEEE. https://doi.org/10.1109/PVSC43889.2021.9518745

Kunrath, K. & Ramanujan, D. (2021). Fostering Sustainable Mindsets In Engineering Education. Proceedings of the Design Society , 1, 1597 - 1606. https://doi.org/10.1017/pds.2021.421

Malekan, M., Budzik, M. K., Jensen, H. M. & Aghababaei, R. (2021). Fracture analyses of surface asperities during sliding contact. Tribology International, 159, Article 106939. https://doi.org/10.1016/j.triboint.2021.106939

Budzik, M. K., Heide-Jørgensen, S. & Aghababaei, R. (2021). Fracture mechanics analysis of delamination along width-varying interfaces. Composites Part B: Engineering, 215, Article 108793. https://doi.org/10.1016/j.compositesb.2021.108793

Gøtske, E. K. & Victoria, M. (2021). Future operation of hydropower in Europe under high renewable penetration and climate change. iScience, 24(9), Article 102999. https://doi.org/10.1016/j.isci.2021.102999

Pedersen, M. T., Hansen, P. L. & Clausen, M. P. (2021). Gastronomy unravelled by physics: Gastrophysics. International Journal of Food Design, 6(2), 153-180. https://doi.org/10.1386/IJFD_00029_1

Zhang, B., Endelt, B., Lang, L. & Nielsen, K. B. (2021). Identification of constitutive parameters for thin-walled aluminium tubes using a hybrid strategy. Materials Today Communications, 28, Article 102670. https://doi.org/10.1016/j.mtcomm.2021.102670

Kunrath, K., Leka, S., Abu-Ghaida, H. & Ramanujan, D. (2021). IDENTIFYING INDUSTRY NEEDS FOR INNOVATION SKILLS IN ENGINEERING EDUCATION: A THEMATIC ANALYSIS OF CASES FROM DANISH INDUSTRY. 306-315. Paper presented at SEFI 49th Annual Conference: Blended Learning in Engineering Education: Challenging, Enlightening - and Lasting?, Berlin, Virtual, Germany.

Hashmi, M. F., Ashish, B. K. K., Sharma, V., Keskar, A. G., Bokde, N., Yoon, J. H. & Geem, Z. W. (2021). LARNet: Real-Time Detection of Facial Micro Expression Using Lossless Attention Residual Network. Sensors, 21(4), Article 1098. https://doi.org/10.3390/s21041098

Boettjer, T., Krogshave, J. T. & Ramanujan, D. (2021). Machine-specific estimation of milling energy consumption in detailed design. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 143(8), Article 081010. https://doi.org/10.1115/1.4050179

Aghababaei, R. & Zhao, K. (2021). Micromechanics of material detachment during adhesive wear: A numerical assessment of Archard's wear model. Wear, 476, Article 203739. https://doi.org/10.1016/j.wear.2021.203739

Displaying results 451 to 500 out of 560

Revised 22.02.2024

AU Engineering