Publications

Below you can find a complete list of the publications that are written by employees at the Publications at Department of Mechanical and Production Engineering for example journal articles, books, reports etc.

Publication list

Sort by: Date | Author | Title

Matsuura, K., Mukai, K. & Langthjem, M. A. (2021). Computational and experimental study on ring tone. In S. Hernández & A. Coruña (Eds.), Advances in Fluid Dynamics with emphasis on Multiphase and Complex Flow (pp. 141-151). WIT Press. https://doi.org/10.2495/MPF210121

Budzik, M. K., Athanasiadis, A. & Dias, M. A. (2021). Confined mechanical metamaterials under fracture loading. Abstract from 6TH INTERNATIONAL CONFERENCE ON ADHESIVE BONDING 2021, Porto, Portugal.

Aghababaei, R., Malekan, M. & Budzik, M. (2021). Cutting Depth Dictates the Transition from Continuous to Segmented Chip Formation. Physical Review Letters, 127(23), Article A202. https://doi.org/10.1103/PhysRevLett.127.235502

Malekan, M., Bloch-Jensen, C. D., Zolbin, M. A., Ørskov, K. B., Jensen, H. M. & Aghababaei, R. (2021). Cutting edge wear in high-speed stainless steel end milling. International Journal of Advanced Manufacturing Technology, 114(9-10), 2911-2928. https://doi.org/10.1007/s00170-021-07006-5

Böttjer, T., Ørnskov Rønsch, G., Gonçalves Gomes, C. Â., Ramanujan, D., Iosifidis, A. & Larsen, P. G. (2021). Data-Driven Identification of Remaining Useful Life for Plastic Injection Moulds. In A.-L. Andersen, R. Andersen, D. Brunoe, M. Stoettrup Schioenning Larsen, K. Nielsen, A. Napoleone & S. Kjeldgaard (Eds.), Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems: Proceedings of the Changeable, Agile, Reconﬁgurable and Virtual Production Conference and the World Mass Customization & Personalization Conference (pp. 431-439). Springer. https://www.springerprofessional.de/en/data-driven-identification-of-remaining-useful-life-for-plastic-/19816878

Schwenk-Nebbe, L. J., Victoria, M. & Bruun Andresen, G. (2021). Dataset: A proxy for historical CO2 emissions related to centralised electricity generation in Europe. Data in Brief, 36, Article 107016. https://doi.org/10.1016/j.dib.2021.107016

Zhou, Z., Li, L. & Zhang, X. (2021). Deep Learning on 3D Object Detection for Automatic Plug-in Charging Using a Mobile Manipulator. In 2021 IEEE International Conference on Robotics and Automation (ICRA) (pp. 4148-4154). IEEE. https://doi.org/10.1109/ICRA48506.2021.9561106

Si, G., Sun, L., Zhang, Z. & Zhang, X. (2021). Design, Fabrication, and Testing of a Novel 3D 3-Fingered Electrothermal Microgripper with Multiple Degrees of Freedom. Micromachines, 12(4), Article 444. https://doi.org/10.3390/mi12040444

D. Huang, X. L. ., Jain, N., Abkar, M., Kunz, R. F. & Yang, X. I. A. (2021). Determining a priori a RANS model’s applicable range via global epistemic uncertainty quantification. Computers & Fluids, 230, Article 105113. https://doi.org/10.1016/j.compfluid.2021.105113

Feng, H., Gomes, C., Sandberg, M., Thule, C., Lausdahl, K. & Larsen, P. G. (2021). Developing a Physical and Digital Twin: An Example Process Model. In Companion Proceedings - 24th International Conference on Model-Driven Engineering Languages and Systems, MODELS-C 2021 (pp. 286-295). IEEE. https://doi.org/10.1109/MODELS-C53483.2021.00050

Budzik, M. K., Lopes Fernandes, R., Teixeira de Freitas, S., Heide-Jørgensen, S. & Jumel, J. (2021). Effect of adhesive thickness on joint performance during mode I fracture testing. Abstract from 6TH INTERNATIONAL CONFERENCE ON ADHESIVE BONDING 2021, Porto, Portugal.

Tapetado, P., Victoria, M., Greiner, M. & Usaola, J. (2021). Exploring backup requirements to complement wind, solar and hydro generation in a highly renewable Spanish power system. Energy Strategy Reviews, 38, Article 100729. https://doi.org/10.1016/j.esr.2021.100729

Pedersen, T. T., Victoria, M., Rasmussen, M. G. & Bruun Andresen, G. (2021). Exploring flexibility of near-optimal solutions to highly renewable energy systems. Abstract from 48th IEEE Photovoltaic Specialists Conference (PVSC).

Pedersen, T. T., Victoria, M., Rasmussen, M. G. & Andresen, G. B. (2021). Exploring flexibility of near-optimal solutions to highly renewable energy systems. In 2021 IEEE 48th Photovoltaic Specialists Conference, PVSC 2021 (pp. 387-391). IEEE. https://doi.org/10.1109/PVSC43889.2021.9518745

Kunrath, K. & Ramanujan, D. (2021). Fostering Sustainable Mindsets In Engineering Education. Proceedings of the Design Society, 1, 1597 - 1606. https://doi.org/10.1017/pds.2021.421

Malekan, M., Budzik, M. K., Jensen, H. M. & Aghababaei, R. (2021). Fracture analyses of surface asperities during sliding contact. Tribology International, 159, Article 106939. https://doi.org/10.1016/j.triboint.2021.106939

Budzik, M. K., Heide-Jørgensen, S. & Aghababaei, R. (2021). Fracture mechanics analysis of delamination along width-varying interfaces. Composites Part B: Engineering, 215, Article 108793. https://doi.org/10.1016/j.compositesb.2021.108793

Gøtske, E. K. & Victoria, M. (2021). Future operation of hydropower in Europe under high renewable penetration and climate change. iScience, 24(9), Article 102999. https://doi.org/10.1016/j.isci.2021.102999

Pedersen, M. T., Hansen, P. L. & Clausen, M. P. (2021). Gastronomy unravelled by physics: Gastrophysics. International Journal of Food Design, 6(2), 153-180. https://doi.org/10.1386/IJFD_00029_1

Zhang, B., Endelt, B., Lang, L. & Nielsen, K. B. (2021). Identification of constitutive parameters for thin-walled aluminium tubes using a hybrid strategy. Materials Today Communications, 28, Article 102670. https://doi.org/10.1016/j.mtcomm.2021.102670

Kunrath, K., Leka, S., Abu-Ghaida, H. & Ramanujan, D. (2021). IDENTIFYING INDUSTRY NEEDS FOR INNOVATION SKILLS IN ENGINEERING EDUCATION: A THEMATIC ANALYSIS OF CASES FROM DANISH INDUSTRY. 306-315. Paper presented at SEFI 49th Annual Conference: Blended Learning in Engineering Education: Challenging, Enlightening - and Lasting?, Berlin, Virtual, Germany.

Hashmi, M. F., Ashish, B. K. K., Sharma, V., Keskar, A. G., Bokde, N., Yoon, J. H. & Geem, Z. W. (2021). LARNet: Real-Time Detection of Facial Micro Expression Using Lossless Attention Residual Network. Sensors, 21(4), Article 1098. https://doi.org/10.3390/s21041098

Boettjer, T., Krogshave, J. T. & Ramanujan, D. (2021). Machine-specific estimation of milling energy consumption in detailed design. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 143(8), Article 081010. https://doi.org/10.1115/1.4050179

Aghababaei, R. & Zhao, K. (2021). Micromechanics of material detachment during adhesive wear: A numerical assessment of Archard's wear model. Wear, 476, Article 203739. https://doi.org/10.1016/j.wear.2021.203739

Wang, H. & Zhang, X. (2021). Modal Dynamic Modelling and Experimental Validation of a Curved Extensible Continuum Manipulator. 1958-1965. Paper presented at 2021 IEEE International Conference on Robotics and Automation (ICRA). https://doi.org/10.1109/ICRA48506.2021.9561914

Filsoof, O. T. (2021). Modal Dynamics and Design Analysis of Multi‐Rotor Wind Turbines. [PhD dissertation, Aarhus University]. Aarhus Universitet.

Eidi, A., Ghiassi, R., Yang, X. I. A. & Abkar, M. (2021). Model-form uncertainty quantification in RANS simulations of wakes and power losses in wind farms. Renewable Energy, 179, 2212-2223. https://doi.org/10.1016/j.renene.2021.08.012

Pedersen, T. T., Victoria, M., Rasmussen, M. G. & Bruun Andresen, G. (2021). Modeling all alternative solutions for highly renewable energy systems. Energy, 234, Article 121294. https://doi.org/10.1016/j.energy.2021.121294

Pedersen, T. T., Victoria, M., Rasmussen, M. G. & Bruun Andresen, G. (2021). Modeling all alternative solutions for highly renewable energy systems. Abstract from International Energy Workshop (IEW) 2021, Germany.

Pedersen, S. S., B. Madsen, N., Escalona, J. & Balling, O. (2021). Multibody Models for Tower Vibrations With an Unbalanced Rotor. In 17th International Conference on Multibody Systems, Nonlinear Dynamics, and Control (MSNDC) (Vol. 9). Article V009T09A017 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2021-72182

Abu-Ghaida, H., Leka, S., Kunrath, K., Thostrup, R. & Ramanujan, D. (2021). Økoengineer – A Web-Based Game Platform for Guided Discovery-Based Sustainability Learning in Engineering Curricula. In 18th International Conference on Design Education (DEC): 18th International Conference on Design Education (DEC) (Vol. 4). Article DETC2021-69406, V004T04A014 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2021-69406

Filsoof, O. T., Yde, A., Bøttcher, P. & Zhang, X. (2021). On critical aeroelastic modes of a tri-rotor wind turbine. International Journal of Mechanical Sciences, 204, Article 106525. https://doi.org/10.1016/j.ijmecsci.2021.106525

Sadik, S. & Dias, M. A. (2021). On local kirigami mechanics I: Isometric conical solutions. Journal of the Mechanics and Physics of Solids, 151, Article 104370. https://doi.org/10.1016/j.jmps.2021.104370

Langthjem, M. A. & Nakano, M. (2021). On the acoustic trapped modes and their symmetry properties in a circular cylindrical waveguide with a cavity. Journal of Engineering Mathematics, 128(1), Article 14. https://doi.org/10.1007/s10665-021-10126-2

Walmik Gajghate, P., Mirajkar, A. B., Shaikh, U., Bokde, N. & Mundher Yaseen, Z. (2021). Optimization of Layout and Pipe Sizes for Irrigation Pipe Distribution Network Using Steiner Point Concept. Mathematical Problems in Engineering, 2021, Article 6657459 . https://doi.org/10.1155/2021/6657459

Foldager, F. (2021). Physics-based modeling and simulation of agricultural machine-soil interaction. [PhD dissertation, Aarhus University]. Aarhus Universitet.

Hornshøj-Møller, S., Nielsen, P., Forooghi, P. & Abkar, M. (2021). Quantifying structural uncertainties in Reynolds-averaged Navier–Stokes simulations of wind turbine wakes. Renewable Energy, 164, 1550-1558. https://doi.org/10.1016/j.renene.2020.10.148

Majidi, S. S., Su, Y., Jørgensen, M. L., Müller, C., Forooghi, P., Nie, G. & Chen, M. (2021). Rayleigh Instability-Driven Coaxial Spinning of Knotted Cell-Laden Alginate Fibers as Artificial Lymph Vessels. ACS applied materials & interfaces, 13(19), 22142-22149. https://doi.org/10.1021/acsami.1c00798

Sugiyama, Y., Langthjem, M. A. & Katayama, K. (2021). Shape‐optimized Cantilevered Columns under a Rocket‐based Follower Force. In N. Challamel, J. Kaplunov & I. Takewaki (Eds.), Modern Trends in Structural and Solid Mechanics 1: Statics and Stability (pp. 201-227). Wiley. https://doi.org/10.1002/9781119831891.ch10

Barbalić , J., Rajčić, V., Bedon, C. & Budzik, M. K. (2021). Short-Term Analysis of Adhesive Types and Bonding Mistakes on Bonded-in-Rod (BiR) Connections for Timber Structures. Applied Sciences, 11(6), Article 2665. https://doi.org/10.3390/app11062665

Victoria, M., Haegel, N., Peters, I. M., Sinton, R., Jäger-Waldau, A., del Canizo, C., Breyer, C., Stocks, M., Blakers, A., Kaizuka, I., Komoto, K. & Smets, A. (2021). Solar photovoltaics is ready to power a sustainable future. Joule, 5(5), 1041-1056. https://doi.org/10.1016/j.joule.2021.03.005

Schmiegel, J. & Pons, F. (2021). Stochastic Intermittency Fields in a von Karman Experiment. Symmetry, 13(9), Article 1752. https://doi.org/10.3390/sym13091752

Heide-Jørgensen, S., Ibsen, C. H. & Budzik, M. K. (2021). Temperature dependence of moisture diffusion in woven epoxy-glass composites: A theoretical and experimental study. Materials Today Communications, 29, Article 102844. https://doi.org/10.1016/j.mtcomm.2021.102844

Kozarcanin, S. & Bruun Andresen, G. (2021). The effect of increased coupling strength between electricity and heating systems in different climate scenarios for Europe. Energy and Climate Change, 2, Article 100039. https://doi.org/10.1016/j.egycc.2021.100039

Si, G., Sun, L., Zhang, Z. & Zhang, X. (2021). Theoretical thermal-mechanical modelling and experimental validation of a three-dimensional (3D) electrothermal microgripper with three fingers. Micromachines, 12(12), Article 1512. https://doi.org/10.3390/mi12121512

Skovsgaard, S. P. H. & Heide-Jørgensen, S. (2021). Three-dimensional mechanical behavior of composite with fibre-matrix delamination through homogenization of micro-structure. Composite Structures, 275, Article 114418. https://doi.org/10.1016/j.compstruct.2021.114418

Bokde, N., Hasan Ali, Z., Th. Al-Hadidi, M., Ahsan Farooque, A., Jamei, M., Abdulridha Al Maliki, A., Hamiye Beyaztas, B., Faris, H. & Mundher Yaseen, Z. (2021). Total Dissolved Salt Prediction Using Neurocomputing Models: Case Study of Gypsum Soil Within Iraq Region. IEEE Access, 9, 53617 - 53635. Article 9395118. https://doi.org/10.1109/ACCESS.2021.3071015

Foldager, F. F., Thule, C., Balling, O. & Larsen, P. G. (2021). Towards a Digital Twin - Modelling an Agricultural Vehicle. In T. Margaria & B. Steffen (Eds.), Leveraging Applications of Formal Methods, Verification and Validation: 9th International Symposium on Leveraging Applications of Formal Methods, ISoLA 2020, Rhodes, Greece, October 20–30, 2020, Proceedings, Part IV (pp. 109-123). Springer. https://doi.org/10.1007/978-3-030-83723-5_8

Speakman, G. A., Abkar, M., A. Martínez-Tossas, L. & Bastankhah, M. (2021). Wake steering of multirotor wind turbines. Wind Energy, 24(11), 1294-1314. https://doi.org/10.1002/we.2633

Z. Bernstein, W., Tensa, M., Praniewicz, M., Kwon, S. & Ramanujan, D. (2020). An automated workflow for integrating environmental sustainability assessment into parametric part design through standard reference models. Procedia CIRP, 90, 102-108. https://doi.org/10.1016/j.procir.2020.02.058

Displaying results 501 to 550 out of 584

Revised 22.02.2024

AU Engineering