Department of Mechanical and Production Engineering

Aarhus University Seal
 Department of Mechanical and Production Engineering About the department Sections Mechanics and Materials Research Groups Material Instabilities Publications

Publications

Sort by: Date | Author | Title

Jensen, H. M. (2002). Three-dimensional numerical investigation of brittle bond fracture. International Journal of Fracture, 114(2), 153-165. https://doi.org/10.1023/A:1015066711279
Moon, M. W., Jensen, H. M., Hutchinson, J. W., Oh, K. H. & Evans, A. G. (2002). The characterization of telephone cord buckling of compressed thin films on substrates. Journal of the Mechanics and Physics of Solids, 50(11), 2355-2377. https://doi.org/10.1016/S0022-5096(02)00034-0
Jensen, H. M. & Sheinman, I. (2001). Straight-sided, buckling-driven delamination of thin films at high stress levels. International Journal of Fracture, 110(4), 371-385. https://doi.org/10.1023/A:1010821918325
Jensen, H. M. (1999). Analysis of compressive failure of layered materials by kink band broadening. International Journal of Solids and Structures, 36(23), 3427-3441. https://doi.org/10.1016/S0020-7683(98)00158-9
Jensen, H. M. (1999). Models of failure in compression of layered materials. Mechanics of Materials, 31(9), 553-564. https://doi.org/10.1016/S0167-6636(99)00019-8
Jensen, H. M. (1998). Analysis of mode mixity in blister tests. International Journal of Fracture, 94(1), 79-88. https://doi.org/10.1023/A:1007555313162
Jensen, H. M. & Christoffersen, J. (1997). Kink band formation in fiber reinforced materials. Journal of the Mechanics and Physics of Solids, 45(7), 1121-1136. https://doi.org/10.1016/S0022-5096(96)00126-3
Christoffersen, J. & Jensen, H. M. (1996). Kink band analysis accounting for the microstructure of fiber reinforced materials. Mechanics of Materials, 24(4), 305-315. https://doi.org/10.1016/S0167-6636(96)00052-X
Jensen, H. M. & Thouless, M. D. (1995). Buckling instability of straight edge cracks. Journal of Applied Mechanics, Transactions ASME, 62(3), 620-625. https://doi.org/10.1115/1.2895991
Jensen, H. M. (1994). Delamination at edges in layered materials. American Society of Mechanical Engineers, Applied Mechanics Division, AMD, 196, 67-73.
Jensen, H. M. & Cochelin, B. (1994). Fracture analysis of the constrained blister test. The Journal of Adhesion, 47(4), 231-243. https://doi.org/10.1080/00218469408027103
Thouless, M. D., Jensen, H. M. & Liniger, E. G. (1994). Delamination from edge flaws. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 447(1930), 271-279. https://doi.org/10.1098/rspa.1994.0140
Thouless, M. D. & Jensen, H. M. (1994). The effect of residual stresses on adhesion measurements. Journal of Adhesion Science and Technology, 8(6), 579-586. https://doi.org/10.1163/156856194X00357
Jensen, H. M. (1993). A numerical method for delamination in composites. Computational Materials Science, 1(3), 319-324. https://doi.org/10.1016/0927-0256(93)90027-K
Jensen, H. M. & Thouless, M. D. (1993). Effects of residual stresses in the blister test. International Journal of Solids and Structures, 30(6), 779-795. https://doi.org/10.1016/0020-7683(93)90040-E
Jensen, H. M. (1993). Energy release rates and stability of straight-sided, thin-film delaminations. Acta Metallurgica Et Materialia, 41(2), 601-607. https://doi.org/10.1016/0956-7151(93)90090-F
Thouless, M. D. & Jensen, H. M. (1992). Elastic fracture mechanics of the peel-test geometry. Journal of Adhesion, 38(3-4), 185-197. https://doi.org/10.1080/00218469208030454
Jensen, H. M. (1991). The blister test for interface toughness measurement. Engineering Fracture Mechanics, 40(3), 475-486. https://doi.org/10.1016/0013-7944(91)90144-P
Hutchinson, J. W. & Jensen, H. M. (1990). Models of fiber debonding and pullout in brittle composites with friction. Mechanics of Materials, 9(2), 139-163. https://doi.org/10.1016/0167-6636(90)90037-G
Jensen, H. M., Hutchinson, J. W. & Kyung-Suk, K. (1990). Decohesion of a cut prestressed film on a substrate. International Journal of Solids and Structures, 26(9-10), 1099-1114. https://doi.org/10.1016/0020-7683(90)90018-Q
Jensen, H. M. (1990). Mixed mode interface fracture criteria. Acta Metallurgica Et Materialia, 38(12), 2637-2644. https://doi.org/10.1016/0956-7151(90)90276-M
Jensen, H. M. (1988). Collapse of hydrostatically loaded cylindrical shells. International Journal of Solids and Structures, 24(1), 51-64. https://doi.org/10.1016/0020-7683(88)90098-4

Displaying results 101 to 122 out of 122

Previous

1

2

3

Revised 13.11.2025
-
Henrik Myhre Jensen