Department of Mechanical and Production Engineering

Aarhus University Seal
 Department of Mechanical and Production Engineering About the department Sections Mechanics and Materials Research Groups Material Instabilities Publications

Publications

Sort by: Date | Author | Title

Veluri, B. & Jensen, H. M. (2012). Simulation of Interfacial Corner Cracks in Bimaterial Systems. In Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition: IMECE2012
Veluri, B., Santos-Martin, D. & Jensen, H. M. (2012). Simulation of Voltage Dip Event in Fixed-Speed Wind Turbines: Fatigue Evaluation. Engineering Mechanics, 19(2/3), 143-154.
Veluri, B., Santos-Martin, D. & Jensen, H. M. (2011). Analysis of Mechanical Stresses Due to Voltage Dips in Fixed-Speed Wind Turbines. In 13th International Conference on Applied Mechanics 2011 (pp. 235) http://www.am2011.ipm.cz/eng/index.html
Veluri, B. & Jensen, H. M. (2011). Numerical implementation of constitutive material law for simulating the kinkband formation in fiber composites. Key Engineering Materials, 488-489 (472), 472-475. https://doi.org/10.4028/www.scientific.net/KEM.488-489.472
Veluri, B. & Jensen, H. M. (2011). Simulation of Compressive Failure in Fiber Composites. Abstract from ASME 2011 Applied Mechanics and Materials Conference, Chicago, Illinois, United States. http://www.asmeconferences.org/mcmat2011/
Veluri, B. & Jensen, H. M. (2011). Simulation of Post Failure Response in Fiber Composites. In B. Cox (Ed.), Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition: IMECE2011 http://www.asmeconferences.org/congress2011/
Veluri, B., Santos-Martin, D. & Jensen, H. M. (2011). Voltage sag influence on fatigue life of the drivetrain of fixed speed wind turbines. ARPN Journal of Engineering and Applied Sciences, 6(3).
Gebhardt, C., Preidikman , S., Massa, J. C., Veluri, B. & Jensen, H. M. (2010). Analysis of the Drivetrain Performance of a Large Horizontal-Axis Wind Turbine: An Aeroelastic Approach. In NAFEMS NORDIC Regional Conference 2010: Trends and Future Needs in Engineering Simulation NAFEMS NORDIC Region. http://www.nafems.org/events/nafems/2010/NORDIC2010/
Gebhardt, C., Veluri, B., Preidikman, S., Jensen, H. M. & Massa, J. (2010). Numerical Simulations of the Aeroelastic Behavior of Large Horizontal-Axis Wind Turbines: The Drivetrain Case. Mecánica Computacional, XXIX(10). http://www.cimec.org.ar/ojs/index.php/mc/article/view/3068
Jensen, H. M. (2010). A simple finite element for non-linear material behaviour.
Jensen, H. M. (2010). Compliance method vs. effective crack tip forces and moments.
Jensen, H. M. (2010). Constitutive equations.
Jensen, H. M. (2010). Elasticity coupled with damage.
Jensen, H. M. (2010). Modelling of kink band formation in composite materials. Abstract from 16th US National Congress of Theoretical and Applied Mechanics, Pennsylvania, United States.
Jensen, H. M. (2010). Modelling of Kink Band Formation in Fibre Composites. Paper presented at US National Congress on Theoretical and Applied Mechanics, State College, PA, United States.
Jensen, H. M. (2010). Notes in Fracture Mechanics.
Jensen, H. M. (2010). Peel test geometry, crack tip analysis, plastic corrections.
Jensen, H. M. (2010). Plane conditions, the Airy stress function.
Jensen, H. M. (2010). Plane elasticity, polar coordinates.
Jensen, H. M. (2010). Constitutive equations, Hooke's generalised law.
Jensen, H. M. (2010). Dilute and self-consistent calculations of elastic moduli of materials with cavities.
Jensen, H. M. (2010). Introduction to index notation and tensor analysis.
Jensen, H. M. (2010). Principle of virtual work, elastic energy.
Jensen, H. M. (2010). Principle of virtual work, simple beams.
Jensen, H. M. (2010). Principle of virtual work, uniaxial loading.
Jensen, H. M. (2010). Representative volume elements, unit cells and definitions of macroscopic stresses and strains.
Jensen, H. M. (2010). Stress concentration at circular holes.
Jensen, H. M. (2010). The strain state.
Jensen, H. M. (2010). The stress state and equilibrium.
Jensen, H. M. (2010). Voigt and Reuss models, bounds on moduli and compliances.
Jensen, H. M. (2010). The compatibility equations.
Jensen, H. M. (2010). The CST element derived using the principle of virtual work.
Jensen, H. M. (2010). The J2 flow theory.
Mikkelsen, L. P., Sørensen, K. D. & Jensen, H. M. (2010). A Smeared-out Material Model Predicting Compressive Failure of Composites. Paper presented at NAFEMS Nordic Seminar: Simulating Composite Materials and Structures, Esbjerg, Denmark.
Veluri, B. & Jensen, H. M. (2010). Simulation of Kinkband Formation in Fiber Composites. In A. Eriksson & G. Tibert (Eds.), Proceedings of NSCM 23: the 23rd Nordic Seminar on Computational Mechanics (pp. 194-197). http://congress.cimne.upc.es/nscm-23/frontal/doc/proceedings.pdf
Sørensen, K. D., Mikkelsen, L. P., Jensen, H. M. & Sørensen, K. D. (2009). User subroutine for compressive failure of composites. Paper presented at Simulia Conference 2009, London, United Kingdom.
Clausen, J., Jensen, H. M. & Sørensen, K. D. (2008). Thin film delamination at corners. In J. P. Denier, M. Finn & T. Mattner (Eds.), Abstracts book : XXII International Congress of Theoretical and Applied Mechanics, ICTAM 2008 Adelaide (pp. 274)
Jensen, H. M., Sørensen, K. D. & Clausen, J. (2008). Delamination of Compressed Thin Layers at Corners. https://pure.au.dk/admin/files/15365084/CornerDelaminationICTAM08.pdf
Jensen, H. M. (2008). Interface Fracture in Adhesively Bonded Shell Structures. Engineering Fracture Mechanics, 75, 571-578.
Sørensen, K. D. & Jensen, H. M. (2008). Buckling-driven Delamination in Layered Spherical Shells. Journal of the Mechanics and Physics of Solids, 56, 230-240.
Sørensen, K. D., Jensen, H. M. & Clausen, J. C. S. (2008). Delamination of Compressed Thin Layers at Corners. International Journal of Solids and Structures, 45, 5867-5878.
Sørensen, K. D., Jensen, H. M. & Clausen, J. (2008). Delamination of Compressed Thin Layers at Corners. International Journal of Solids and Structures, 45(22-23), 5867-5878. https://doi.org/10.1016/j.ijsolstr.2008.07.004
Jensen, H. M. (2005). Comparison of a fracture mechanics based model and a cohesive zone model of fracture in joints. In 11th International Conference on Fracture 2005, ICF11 (pp. 724-729)
Feraren, P. & Jensen, H. M. (2004). Cohesive zone modelling of interface fracture near flaws in adhesive joints. Engineering Fracture Mechanics, 71(15), 2125-2142. https://doi.org/10.1016/j.engfracmech.2003.12.003
Pane, I. & Jensen, H. M. (2004). Plane strain bifurcation and its relation to kinkband formation in layered materials. European Journal of Mechanics, A/Solids, 23(3), 359-371. https://doi.org/10.1016/j.euromechsol.2004.01.009
Pantleon, K., Jensen, H. M. & Somers, M. A. J. (2004). Free-standing line patterns of nanocrystalline electrodeposits. Materials Research Society Symposium Proceedings, 812, 191-196. https://doi.org/10.1557/proc-812-f3.20
Pantleon, K., Jensen, H. M. & Somers, M. A. J. (2004). X-ray diffraction studies of free-standing electrodeposited Cu-patterns. Advanced Engineering Materials, 6(10), 828-832. https://doi.org/10.1002/adem.200400089
Jensen, H. M. (2003). Crack initiation and growth in brittle bonds. Engineering Fracture Mechanics, 70(13), 1611-1621. https://doi.org/10.1016/S0013-7944(02)00200-X
Jensen, H. M. & Sheinman, I. (2002). Numerical analysis of buckling-driven delamination. International Journal of Solids and Structures, 39(13-14), 3373-3386. https://doi.org/10.1016/S0020-7683(02)00158-0
Jensen, H. M. (2002). Residual stress effects on the compressive strength of unidirectional fibre composites. Acta Materialia, 50(11), 2895-2904. https://doi.org/10.1016/S1359-6454(02)00114-3

Displaying results 51 to 100 out of 122

Previous

1

2

3

Next

Revised 13.11.2025
-
Henrik Myhre Jensen