Publications

Below you can find a complete list of the publications that are written by employees at the Publications at Department of Mechanical and Production Engineering for example journal articles, books, reports etc.

Publication list

Sort by: Date | Author | Title

Wieber, C., Jeppesen, M. R., Finster, K., Melvad, C. & Santl-Temkiv, T. (2024). Micro-PINGUIN: microtiter-plate-based instrument for ice nucleation detection in gallium with an infrared camera. Atmospheric Measurement Techniques, 17(9), 2707–2719. https://doi.org/10.5194/amt-17-2707-2024

Alamia, A. & Bruun Andresen, G. (2024). Modelling Alternatives for integrted PtX infrastrcture between Denmark and EU. Poster session presented at 12th European Open Energy Modelling Workshop, Grenoble, France.

Abbiati, G., Gomes, C., Sandberg, M., Kazemi, Z., Hansen, S. T. & Larsen, P. G. (2024). Modelling for Digital Twins. In J. Fitzgerald, C. Gomes & P. G. Larsen (Eds.), The Engineering of Digital Twins (pp. 89-127). Springer. https://doi.org/10.1007/978-3-031-66719-0_5

Ninno, F., Chiastra, C., Colombo, M., Dardik, A., Strosberg, D., Aboian, E., Tsui, J., Bartlett, M., Balabani, S. & Díaz-Zuccarini, V. (2024). Modelling lower-limb peripheral arterial disease using clinically available datasets: impact of inflow boundary conditions on hemodynamic indices for restenosis prediction. Computer Methods and Programs in Biomedicine, 251, Article 108214. https://doi.org/10.1016/j.cmpb.2024.108214

Moon, J., Mahravan, E. & Kim, D. (2024). Mutual interaction of a collapsing bubble and a nearby viscoelastic solid. Physical Review Fluids, 9(4), Article 043603. https://doi.org/10.1103/PhysRevFluids.9.043603

Mitra, T., singh, G., Darki, A. A., Madsen, S. P. & Dantan, A. R. (2024). Narrow-linewidth Fano microcavities with resonant subwavelength grating mirror. Optics Express, 32(9), 15667-15679. https://doi.org/10.1364/OE.521329

Sadik, S. & Yavari, A. (2024). Nonlinear anisotropic viscoelasticity. Journal of the Mechanics and Physics of Solids, 182, Article 105461. https://doi.org/10.1016/j.jmps.2023.105461

Sujon, M. A. S., Masato, D., Andriollo, T., Pan, Z., Nadimpalli, V. K., Henriquez, V. C. & Islam, A. (2024). Novel approach for optimizing mechanical and damping performance of MABS composites reinforced with basalt fibers: An experimental study. Composites Science and Technology, 251, Article 110578. https://doi.org/10.1016/j.compscitech.2024.110578

Zheng, W., Ma, L., Pei, S. & Aghababaei, R. (2024). Numerical assessment of transition in cutting mode and its effect on roughness creation. International Journal of Mechanical Sciences, 261, Article 108666. https://doi.org/10.1016/j.ijmecsci.2023.108666

Šeta, B., Sandberg, M., Brander, M., Mollah, M. T., Pokkalla, D. K., Kumar, V. & Spangenberg, J. (2024). Numerical modeling of fiber orientation in multi-layer, isothermal material-extrusion big area additive manufacturing. Additive Manufacturing, 92, Article 104396. https://doi.org/10.1016/j.addma.2024.104396

Langthjem, M. A. & Jensen, H. M. (2024). On matched asymptotic expansion solutions of a bucklewave propagation problem. Zeitschrift fuer Angewandte Mathematik und Mechanik, 104(5), 1. Article e202300655. https://doi.org/10.1002/zamm.202300655

E.F. Athanasiadis, A., Budzik, M. K., Fernando, D. & Dias, M. A. (2024). On micropolar elastic foundations. European Journal of Mechanics A - Solids, 105, Article 105277. https://doi.org/10.1016/j.euromechsol.2024.105277

Cremoncini, D., Frate, G. F., Bischi, A., Pedersen, T. T., Bruun Andresen, G., Bentien, A. & Ferrari, L. (2024). Optimal participation of a wind and hybrid battery storage system in the day-ahead and automatic frequency restoration reserve markets. Journal of Energy Storage, 94, Article 112309. https://doi.org/10.1016/j.est.2024.112309

Alamia, A., Partoon, B., Rattigan, E. & Bruun Andresen, G. (2024). Optimizing hydrogen and e-methanol production through Power-to-X integration in biogas plants. Energy Conversion and Management, 322, Article 119175. https://doi.org/10.1016/j.enconman.2024.119175

Strack, D., Manohar Rayudu, N., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2024). OPTIMIZING PATIENT-SPECIFIC BONE FINITE ELEMENT ANALYSIS: MESH CONVERGENCE AND MATERIAL GROUPING STRATEGIES. Orthopaedic Proceedings, 127. https://doi.org/10.1302/1358-992X.2024.18.127

Garg, H., Ledda, P. G., Skov Pedersen, J. & Pezzulla, M. (2024). Passive Viscous Flow Selection via Fluid-Induced Buckling. Physical Review Letters, 133(8), Article 084001. https://doi.org/10.1103/PhysRevLett.133.084001

Ulriksen, M. D., Greś, S. & Bernal, D. (2024). Perturbation-invariant eigenvalue assignment for statistical damage localization. Journal of Physics: Conference Series, 2647, Article 192017. https://doi.org/10.1088/1742-6596/2647/19/192017

Calafà, M., Hovad, E., Engsig-Karup, A. P. & Andriollo, T. (2024). Physics-Informed Holomorphic Neural Networks (PIHNNs): Solving 2D linear elasticity problems. Computer Methods in Applied Mechanics and Engineering, 432, Article 117406. https://doi.org/10.1016/j.cma.2024.117406

Alzweighi, M., Mansour, R., Maass, A., Hirn, U. & Kulachenko, A. (2024). Predicting moisture penetration dynamics in paper with machine learning approach. International Journal of Solids and Structures, 288, Article 112602. https://doi.org/10.1016/j.ijsolstr.2023.112602

Kirikova, M., Forbrig, P. & Møller, C. (2024). Preface: 9thWorkshop on Managed Complexity (ManComp). In Joint Proceedings of the BIR 2024 Workshops and Doctoral Consortium co-located with 23rd International Conference on Perspectives in Business Informatics Research (BIR 2024) (Vol. 3804). CEUR-WS.org.

Jensen, H. M. (2024). Propagating instabilities in solids. In ICTAM2024: Abstract Book (pp. 48-51). International Congress of Theoretical and Applied Mechanics.

Bernal, D. & Ulriksen, M. D. (2024). Quadratic basis pursuit in model updating of underconstrained problems. Journal of Physics: Conference Series, 2647(25), Article 252001. https://doi.org/10.1088/1742-6596/2647/25/252001

Zhang, Z., Chai, X., Si, G. & Zhang, X. (2024). Quantifying Variability in Zebrafish Larvae Locomotor Behavior across Experimental Conditions: A Learning-Based Tracker. Fishes, 9(6), Article 193. https://doi.org/10.3390/fishes9060193

Asghari, M., Ivetich, S. D., Aslan, M. K., Aramesh, M., Melkonyan, O., Meng, Y., Xu, R., Colombo, M., Weiss, T., Balabanov, S., Stavrakis, S. & deMello, A. J. (2024). Real-time viscoelastic deformability cytometry: High-throughput mechanical phenotyping of liquid and solid biopsies. Science Advances, 10(49), Article eabj1133. https://doi.org/10.1126/sciadv.abj1133

Rajabi-Abhari, A., Yoo, H., Kim, J.-S., Yoon, H. Y., Park, J. Y., Yan, N., Tabassian, R. & Oh, I.-K. (2024). Reversibly Compressible Silanated Cellulose Nanofibril Aerogel for Triboelectric Taekwondo Scoring Sensors. Small, 20(50), Article 2405664. https://doi.org/10.1002/smll.202405664

Rincón, M. J. (2024). Robust Optimisation of Ultrasonic Flow Meters by Computational Fluid Dynamics and Enhanced Turbulence Modelling. [PhD thesis, Aarhus University]. Aarhus University.

Zehtabiyan-Rezaie, N., Amarloo, A. & Abkar, M. (2024). Secondary flows in the actuator-disk simulation of wind-turbine wakes. Physics of Fluids, 36(4), Article 045142 . https://doi.org/10.1063/5.0203068

Migliorini, M., Zachos, P. K., Macmanus, D. G., Doll, U., Dues, M., Steinbock, J., Dues, F., Siswanto, A., Melnikov, S. M. & Röhle, I. (2024). Seeding-free inlet flow distortion measurements using filtered Rayleigh scattering: integration in a complex intake test facility. Paper presented at AIAA SciTech Forum and Exposition, 2024, Orlando, United States. https://doi.org/10.2514/6.2024-2831

Paraskevoulakos, C., Ghosh, S., Andriollo, T. & Michel, A. (2024). Sensitivity Study Using Synthetic 3D Image Datasets to Investigate the Effect of Noise Artefacts on Digital Volume Correlation. Experimental Mechanics, 64(5), 595-624. https://doi.org/10.1007/s11340-024-01046-0

Karupppasamy, S., Singh, S., Ćuković, S., Sandhu, K., Meixner, G. & Petruse, R. E. (Eds.) (2024). Smart VR/AR/MR Systems for Professionals. CRC Press. https://doi.org/10.1201/9781003306078

Rahdan, P., Zeyen, E. & Victoria, M. (2024). Strategic deployment of solar photovoltaics for achieving self-sufficiency in Europe throughout the energy transition. https://arxiv.org/pdf/2410.19440

Pedersen, M. T., Vilgis, T. A., Brewer, J. R., Hansen, P. L. & Clausen, M. P. (2024). Structural characterization of solvent-based food preparation of jellyfish. Soft Matter, 20(3), 495-510. https://doi.org/10.1039/d3sm00620d

Barvenik, K., Coogan, Z., Librandi, G., Pezzulla, M. & Tubaldi, E. (2024). Tactile Sensing and Grasping Through Thin-Shell Buckling. Advanced Intelligent Systems , 6(9), Article 2300855. https://doi.org/10.1002/aisy.202300855

Nitschke, I., Sadik, S. & Voigt, A. (2024). Tangential Tensor Fields on Deformable Surfaces – How to Derive Consistent L²-Gradient Flows. IMA Journal of Applied Mathematics, 88(6), 917-958. https://doi.org/10.1093/imamat/hxae006

Bernal, D. & Ulriksen, M. D. (2024). The Basis Pursuit as a Set Selector. In C. Rainieri, C. Gentile & M. Aenlle López (Eds.), Proceedings of the 10th International Operational Modal Analysis Conference (IOMAC 2024): Volume 2 (Vol. 2, pp. 357–363). Springer, Cham. https://doi.org/10.1007/978-3-031-61425-5_34

Hejlskov Hansen, M., Vernica, T., Mansour, R. & Ramanujan, D. (2024). Three-Dimensional Visualization of Energy Consumption Data in Additive Manufacturing. In 44th Computers and Information in Engineering Conference (CIE): 44th Computers and Information in Engineering Conference (CIE) (Vol. 2A). Article V02AT02A046 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2024-143405

L.S. Hedvard, M., Dias, M. A. & Budzik, M. K. (2024). Toughening mechanisms and damage propagation in Architected-Interfaces. International Journal of Solids and Structures, 288, Article 112600. https://doi.org/10.1016/j.ijsolstr.2023.112600

Yang, X. (2024). Towards Physical Interaction Control of Collaborative Industrial Robots Augmented with Scientific Machine Learning for SME Productions. [PhD thesis, Aarhus University]. Aarhus University.

Doll, U., Kapulla, R., Dues, M., Steinbock, J., Melnikov, S., Röhle, I., Migliorini, M. & K. Zachos, P. (2024). Towards time-resolved multi-property measurements by filtered Rayleigh scattering: diagnostic approach and verification. Experiments in Fluids, 65(1), Article 2. https://doi.org/10.1007/s00348-023-03740-6

Doll, U., Kapulla, R., Dues, M., Steinbock, J., Melnikov, S., Röhle, I., Migliorini, M. & K. Zachos, P. (2024). Towards Time-Resolved Multi-Property Measurements By Single-Frequency FRS. In 21th International Symposium on the Application of Laser and Imaging Techniques to Fluid Mechanics https://doi.org/10.55037/lxlaser.21st.19

Zhang, Z., Sun, T., Wang, Z. & Zhang, X. (2024). Trajectory Planning and Performance Atlases of a New Omnidirectional Conveyor. Actuators, 13(11), Article 441. https://doi.org/10.3390/act13110441

van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2024). Ultra-tough architected adhesive joints for integrated composite processing and bonding. Composites Part A: Applied Science and Manufacturing, 177, Article 107949. https://doi.org/10.1016/j.compositesa.2023.107949

van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2024). Ultra tough architected joints through single manufacturing step. Abstract from 9th International Conference on Fracture of Polymers, Composites and Adhesives, Switzerland.

Zehtabiyan-Rezaie, N., Perto Justsen, J. & Abkar, M. (2024). Wind-farm power prediction using a turbulence-optimized Gaussian wake model. Wind Energy and Engineering Research, 2, Article 100007. https://doi.org/10.1016/j.weer.2024.100007

Gao, X., Zhang, Y., Haahr-Lillevang, L., Vedel-Smith, N. K. & Andriollo, T. (2023). 3D strain pattern in additively manufactured AlSi10Mg from digital volume correlation. Heliyon, 9(12), Article e23186. https://doi.org/10.1016/j.heliyon.2023.e23186

Islam, R. & Borah, J. P. (2023). 3d transition metal substituted Fe3Se4: prediction of potential permanent magnet. Journal of Physics: Condensed Matter, 35(32), Article 325801. https://doi.org/10.1088/1361-648X/acd319

Alessi, C., Falotico, E. & Lucantonio, A. (2023). Ablation Study of a Dynamic Model for a 3D-Printed Pneumatic Soft Robotic Arm. IEEE Access, 11, 37840-37853. https://doi.org/10.1109/ACCESS.2023.3266282

Formentini, G. & Ramanujan, D. (2023). Accounting For Product End-of-Life Status in Disassembly Time Estimation Using Modified Maynard Operation Sequences. Procedia CIRP, 116, 305-311. https://doi.org/10.1016/j.procir.2023.02.052

Yang, J., Velandia, J., Bansmer, S., Stroh, A. & Forooghi, P. (2023). A comparison of hydrodynamic and thermal properties of artificially generated against realistic rough surfaces. International Journal of Heat and Fluid Flow, 99, Article 109093. https://doi.org/10.1016/j.ijheatfluidflow.2022.109093

Frandsen, L. N., Kristensen, C. K., Haahr-Lillevang, L., Klingaa, C. G., Mohanty, S. & Pedersen, M. M. (2023). A method for developing predictive models of quality metrics and gas flow variables for 316L PBF-LB/M printed components based on image analysis. In O. Riemer, C. Nisbet & D. Phillips (Eds.), European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 23rd International Conference and Exhibition, EUSPEN 2023: Copenhagen 2023 (pp. 115-118). Euspen.

Displaying results 201 to 250 out of 520

Revised 22.02.2024

AU Engineering