Department of Mechanical and Production Engineering

Aarhus University Seal
 Department of Mechanical and Production Engineering Research Publications

Publications

Below you can find a complete list of the publications that are written by employees at the Publications at Department of Mechanical and Production Engineering for example journal articles, books, reports etc. 

Publication list

Sort by: Date | Author | Title

Sanz-Cuadrado, C., Rahdan, P., Zhang, Z., Victoria, M. & Belén Cristóbal, A. (2026). A New Approach to Assess Individual Contributions to Energy Transition Goals. Energy Policy, 210, Article 115055. https://doi.org/10.1016/j.enpol.2025.115055
Haase, L. M., Mugge, R., Jaeger-Erben, M., Nhu Laursen, L., Niinimäki , K., Richter, J., Sprecher, B. & Watkins, M. (2026). Editorial: Product lifetimes and the environment: Retaining product value in a circular economy. Resources, Conservation & Recycling, 225(108617), Article 108617. https://doi.org/10.1016/j.resconrec.2025.108617
Zehtabiyan-Rezaie, N. (2026). From guidance to independence: Scaffolding a diverse group of students. AU Educate. https://educate.au.dk/en/teaching-cases/from-support-to-independence-scaffolding-a-diverse-group-of-students
Zattoni, M., Bontempi, L., Ringgaard, S., Luraghi, G., Benhassen, L. L., Johansen, P. & Colombo, M. (2026). In silico modelling of aortic annuloplasty: hemodynamic assessment through in vitro experiments and in vivo MRI. Computer Methods and Programs in Biomedicine, 277, 109246. https://doi.org/10.1016/j.cmpb.2026.109246
Lawson, N. J., Migliorini, M., Doll, U., Melnikov, S., Steinbock, J., Dues, M., Zachos, P. K., Röhle, I. & MacManus, D. G. (2026). Pathway to Non-Intrusive In-Flight Flow Diagnostics with Filtered Rayleigh Scattering: SAE International Journal of Aerospace. SAE International Journal of Aerospace, 19(1). https://doi.org/10.4271/01-19-01-0001
Fulco, S., Budzik, M. K. & Turner, K. (2026). Tailoring toughness and adhesion through architected interfaces. npj Metamaterials, 2, 1-10. Article 5. https://doi.org/10.1038/s44455-025-00014-5
Hansen, C., Yang, X. I. A. & Abkar, M. (2026). Wall-modeled large-eddy simulation of turbulent smooth body separation using the OpenFOAM flow solver. Journal of Fluids Engineering, Transactions of the ASME, Article 011502.
Li, L., Wan, L., Krueger, V. & Zhang, X. (2025). 3D Hand-Eye Calibration for Collaborative Robot Arm: Look at Robot Base Once. In Proceedings of the 22nd International Conference on Informatics in Control, Automation and Robotics - (Volume 2) (Vol. 2, pp. 333-341). SCITEPRESS Digital Library. https://doi.org/10.5220/0013738500003982
Li, L. (2025). Active 3D Vision for Robotic Manufacturing Enhancement. [PhD thesis, Aarhus University].
Nazari, R., Aghababaei, R., Papangelo, A. & Ciavarella, M. (2025). Adhesion- and friction-induced suppression of buckling in thin spherical shells in contact with a rigid wall. International Journal of Engineering Science, 215, Article 104329. https://doi.org/10.1016/j.ijengsci.2025.104329
Migliorini, M., Doll, U., Lawson, N. J., Melnikov, S. M., Steinbock, J., Dues, M., Zachos, P. K., Röhle, I. & MacManus, D. G. (2025). Advancements on the use of Filtered Rayleigh Scattering (FRS) with Machine learning methods for flow distortion in Aero-Engine intakes. Experimental Thermal and Fluid Science, 160, 111325. Article 111325. https://doi.org/10.1016/j.expthermflusci.2024.111325
Farhadiyadkuri, F. & Zhang, X. (2025). A Five-Dimensional Three-Layer Digital Twin to Train a Reinforcement Learning Agent for Interaction Control of a Robotic Exoskeleton in Adolescent Idiopathic Scoliosis Rehabilitation. International Journal of Mechanical System Dynamics, 5(3), 385-400. https://doi.org/10.1002/msd2.70020
Rincón, M. J., Reclari, M., Yang, X. I. A. & Abkar, M. (2025). A generalisable data-augmented turbulence model with progressive and interpretable corrections for incompressible wall-bounded flows. International Journal of Heat and Fluid Flow, 116, Article 109970. https://doi.org/10.1016/j.ijheatfluidflow.2025.109970
Sadik, S. & Yavari, A. (2025). A generalized Coleman-Noll procedure and the balance laws of hyper-anelasticity. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 481(2320), Article 20250076. https://doi.org/10.1098/rspa.2025.0076
Qian, F., Ding, H., Liu, T., Wu, Z., Zhang, X. & Iqbal, A. (2025). An adaptive active vibration control for flexible beam systems under unknown deterministic disturbances. Mechanical Systems and Signal Processing, 228, Article 112447. https://doi.org/10.1016/j.ymssp.2025.112447
Chedevergne, F., Yang, J., Stroh, A. & Forooghi, P. (2025). Analysis of Separation in the Roughness Sublayer Using DNS Data and DANS/DEM Modelling of Roughness Effects. Flow, Turbulence and Combustion, 114(3), 713-735. Article 021202. https://doi.org/10.1007/s10494-024-00585-9
Formentini, G., Prioli, J. PJ., Ko, J., Hapuwatte, B., Ferrero, V., Badurdeen, F., Rickli, J. L. & Ramanujan, D. (2025). A review of disassembly systems for circular product design. Journal of Cleaner Production, 506, Article 145459. https://doi.org/10.1016/j.jclepro.2025.145459
Li, L. & Zhang, X. (2025). A robust assessment method of point cloud quality for enhancing 3D robotic scanning. Robotics and Computer-Integrated Manufacturing, 92, Article 102863. https://doi.org/10.1016/j.rcim.2024.102863
Durocher, H., Bachmann, C., Mozzillo, R., Janeschitz, G. & Zhang, X. (2025). A Spatial Five-Bar Linkage as a Tilting Joint of the Breeding Blanket Transporter for the Remote Maintenance of EU DEMO. Machines, 13(5), Article 371. https://doi.org/10.3390/machines13050371
Jensen, R. M. & Forooghi, P. (2025). A study of turbulent flow over patchy roughness. Journal of Fluid Mechanics, 1006, Article A28. https://doi.org/10.1017/jfm.2024.1095
Langthjem, M. A. (2025). Asymptotic approximations and stability of a propagating bucklewave. Zeitschrift fuer Angewandte Mathematik und Physik, 76(5), Article 193. https://doi.org/10.1007/s00033-025-02568-w
Vishnu, K., Subburaj, K. & Colombo, M. (2025). A two-phase fluid structure interaction model of mucociliary clearance driven by cilium. Computer Methods in Biomechanics and Biomedical Engineering. Advance online publication. https://doi.org/10.1080/10255842.2025.2535014
Darabi, R., Oliveira, J. P., Nemati, N., Reis, A. & de Sá, J. C. (2025). Benchmarking advanced multiphase field modeling of Inconel 625 in additive manufacturing: Correlating powder bed fusion with dendrite growth and crack formation. Materialia, 40, Article 102384. https://doi.org/10.1016/j.mtla.2025.102384
Morree, A. D. & Tabula Sapiens Consortium (2025). Benchmarking cell type and gene set annotation by large language models with AnnDictionary. Nature Communications, 16(1), Article 9511. https://doi.org/10.1038/s41467-025-64511-x
Strack, D., Mesbah, M., Kirschke , J. S. & Karupppasamy, S. (2025). Biomechanical Alterations Following Vertebral Fracture: A Patient-Specific L3-L5 Finite Element Analysis. Abstract from World Congress of Orthopaedic Research, Adelaide, South Australia, Australia. https://doi.org/10.13140/RG.2.2.28212.10884
Ambrose, H. W., Engelbrecht, N., Alamia, A. & Kofoed, M. V. W. (2025). Biomethanation With Renewable Energy: Harnessing the Carbon-Water-Energy Nexus. Abstract from 33rd European Biomass Conference & Exhibition , Valencia, Spain.
van Innis, C., Budzik, M. K. & Pardoen, T. (2025). Bridging in co-cured composite joints. International Journal of Solids and Structures, 309, Article 113194. https://doi.org/10.1016/j.ijsolstr.2024.113194
Moon, J., Jang, C., Mahravan, E. & Kim, D. (2025). Cavitation bubble-induced hydrodynamic loading and interfacial deformation in an air pocket. Journal of Fluid Mechanics, 1016, Article A39. https://doi.org/10.1017/jfm.2025.10398
Yang, J., Stroh, A., Bagheri, S., Frohnapfel, B. & Forooghi, P. (2025). Characterization of hydrodynamic and thermal properties of anisotropic irregular roughness. International Journal of Heat and Fluid Flow, 116, Article 109888. https://doi.org/10.1016/j.ijheatfluidflow.2025.109888
Kabachi, M. A., Sandberg, M. & Ermanni, P. (2025). Combined experimental–numerical approach for through-thickness unsaturated permeability characterization of deformable fiber-beds. Composite Structures, 371, Article 119396. https://doi.org/10.1016/j.compstruct.2025.119396
Li, W., Wu, S., Zhu, J., Zhang, L., Zheng, J., Wang, H., Qiu, Y., Xie, G. & Li, C. (2025). Constitutive modelling of time-dependent polymer matrix composites: Incorporating a visco-hyperelastic model into the micromechanical framework. Composite Structures, 366, Article 119220. https://doi.org/10.1016/j.compstruct.2025.119220
Li, J., Zhou, X., Brochu, M., Chekir, N., Sixsmith, J. J. & Zhao, Y. F. (2025). Crystal introducing mechanism in laser wire directed energy deposition fabricated Ti6Al4V. Progress in Additive Manufacturing, 10(2), 1231-1241. https://doi.org/10.1007/s40964-024-00701-1
Li, X., Cheng, Y., Møller, C. & Lee, J. (2025). Data issues in industrial AI systems: A meta-review and research strategy. Computers in Industry, 173, Article 104361. https://doi.org/10.1016/j.compind.2025.104361
Hu, P., Li, S. & Budzik, M. K. (2025). Decoupling fracture energy from crack area via surface patterning. Surfaces and Interfaces, 62, Article 106066. https://doi.org/10.1016/j.surfin.2025.106066
Cristóbal, A. B., Sanz-Cuadrado, C., Zhang, Z., Victoria, M., Fialho, L., Cavaco, A., Bokalič, M. & Narvarte, L. (2025). Delving into the modeling and operation of energy communities as epicenters for systemic transformations. Universal Access in the Information Society, 24(3), 2007-2023. https://doi.org/10.1007/s10209-023-01056-0
He, L., Wang, C., Zhang, M., Li, J., Chen, T. & Zhou, X. (2025). Design of BCC/FCC dual-solid solution refractory high-entropy alloys through CALPHAD, machine learning and experimental methods. npj Computational Materials, 11(1), Article 105. https://doi.org/10.1038/s41524-025-01597-3
Djeffal, S., Ghoul, A., Saadi, A., Izri, Z., Morakchi, M. R. & Wang, H. (2025). Design optimization and simulation of a 3D printed cable-driven continuum robot using IKM-ANN and nTop software. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 239(2), 200-218. https://doi.org/10.1177/09596518241276233
Fulco, S., Budzik, M. K., Xiao, H., Durian, D. J. & Turner, K. T. (2025). Disorder enhances the fracture toughness of 2D mechanical metamaterials. PNAS Nexus, 4(2), Article pgaf023. https://doi.org/10.1093/pnasnexus/pgaf023
Nozarian, S. (2025). Drag Prediction and Modification in Smooth- and Rough-Wall-Bounded Turbulent Flows. [PhD thesis, Aarhus University].
Salavatidezfouli, S., Karstoft, H., Iosifidis, A. & Abkar, M. (2025). Dual guidance: Reduced-order model-informed field reconstruction with generative models. Physics of Fluids, 37(9), Article 093617. https://doi.org/10.1063/5.0285462
Fristed, F., Tønning, S., Xie, Z., Langer, L. & Bruun Andresen, G. (2025). Early cross-sector decarbonisation for Europe's hard-to-abate sectors: Insights from Denmark's 2030 target. Applied Energy, 401(Part A), Article 126568. https://doi.org/10.1016/j.apenergy.2025.126568
Pimentel de Figueiredo, R., Limberg, C., Jamone, L. & Bernardino, A. (2025). Editorial: Computer vision mechanisms for resource-constrained robotics applications. Frontiers in Robotics and AI, 12, Article 1680098. https://doi.org/10.3389/frobt.2025.1680098
Movassagh-Alanagh, F., Abdollah-Zadeh, A. & Aghababaei, R. (2025). Effects of B and C elements on microstructure, mechanical and tribological properties of TiN coating deposited by PACVD. Materials Characterization, 225, Article 115178. https://doi.org/10.1016/j.matchar.2025.115178
Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Efficient continuum-based modelling and analysis of polymer SLS: Insights into particle sintering and densification in straight and corner scanning passes. Additive Manufacturing, 109, Article 104828. https://doi.org/10.1016/j.addma.2025.104828
Hund, J., Kouznetsova, V. & Andriollo, T. (2025). Efficient prediction of strength and strain localisation in porous solids via microstructure-based limit analysis. Mechanics of Materials, 201, Article 105208. https://doi.org/10.1016/j.mechmat.2024.105208
Tcherniak, D., Talasila, P., Ulriksen, M. D., Abbiati, G., Mahato, S. & Jensen, A. M. D. (2025). Efficient system identification, model updating, and virtual sensing in the Digital-Twin-as-a-Service software platform. In M. Dohler, A. Melot & M. A. Lopez (Eds.), Proceedings of the 11th International Operational Modal Analysis Conference, IOMAC 2025 (pp. 271-279). International Operational Modal Analysis Conference (IOMAC). https://iomac2025.sciencesconf.org/596439/document
Kalweit, S., Zeyen, E. & Victoria, M. (2025). Endogenous transformation of land transport in Europe for different climate targets. Energy Conversion and Management, 344, Article 120203. https://doi.org/10.1016/j.enconman.2025.120203
Islam, R., Madsen, S. P. & Christensen, M. (2025). Enhancing magnetocrystalline anisotropy in W-type SrFe18O27 hexaferrite via tailored substitutions. Acta Materialia, 288, 120828. Article 120828. https://doi.org/10.1016/j.actamat.2025.120828
Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Entrepreneurial thinking in engineering design education: a comparative study of cognitive paradigms with insights from industry and academia. Entrepreneurship Education. Advance online publication. https://doi.org/10.1007/s41959-025-00158-5
Langthjem, M. A. & Jensen, H. M. (2025). Erratum to: On matched asymptotic expansion solutions of a bucklewave propagation problem (ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, (2024), 104, 5, 10.1002/zamm.202300655). Zeitschrift fuer Angewandte Mathematik und Mechanik, 105(5), Article e70095. https://doi.org/10.1002/zamm.70095

Displaying results 1 to 50 out of 526

1

2

3

4

5

6

7

8

9

10

Next

Revised 22.02.2024
-
AU Engineering