Department of Mechanical and Production Engineering

Aarhus University Seal
 Department of Mechanical and Production Engineering Research Publications

Publications

Below you can find a complete list of the publications that are written by employees at the Publications at Department of Mechanical and Production Engineering for example journal articles, books, reports etc. 

Publication list

Sort by: Date | Author | Title

Ulriksen, M. D., Gres, S., Nieto, P. Z., Dahl, M. B. & Bernal, D. (2025). Invariant eigenvalue assignment and uncertainty quantification for damage localization. Journal of Vibration and Control. Advance online publication. https://doi.org/10.1177/10775463251315981
Pimentel de Figueiredo, R. (2025). Knowledge-Guided Symbolic Regression for Interpretable Camera Calibration. Journal of Imaging, 11(11), Article 389. https://doi.org/10.3390/jimaging11110389
Nozarian, S., Hansen, C., Forooghi, P. & Abkar, M. (2025). Laminarization through annular gap injection in turbulent pipe flows: A large eddy simulation study. Physics of Fluids, 37(5), Article 055128 . https://doi.org/10.1063/5.0264788
Victoria, M., Zhang, Z., Andresen, GB., Rahdan, P. & Gøtske, EK. (2025). Lessons Learned From Establishing a Rooftop Photovoltaic System Crowdsourced by Students and Employees at Aarhus University. Progress in Photovoltaics: Research and Applications, 33(10), 1046-1055. https://doi.org/10.1002/pip.70009
Shojaeifard, M., Ferraresso, M., Lucantonio, A. & Bacca, M. (2025). Machine learning-based optimal design of fibrillar adhesives. Journal of the Royal Society Interface, 22(223), Article 20240636. https://doi.org/10.1098/rsif.2024.0636
Luo, X., Andriollo, T., Baxevanakis, K. P. & Silberschmidt, V. V. (2025). Microstructural effect on fracture evolution in spheroidal graphite iron: Numerical analysis. Engineering Failure Analysis, 174, Article 109459. https://doi.org/10.1016/j.engfailanal.2025.109459
Kristensen, C. K., Kirkegaard, J., Sanporean, C.-G., Budzik, M. K. & Sandberg, M. (2025). Mitigating Discoloration in PA11 SLS: Experimental DoE and Novel Simulation Approaches.
Manti, S. (2025). Model Discovery via Symbolic Regression with Applications to Fluid Transport Problems. [PhD dissertation, Aarhus University].
Alvandifar, N., Mahravan, E., Christensen, K. G. & Forooghi, P. (2025). Modeling of two-phase CO2 ejectors using an Eulerian–Eulerian two-fluid approach. International Journal of Refrigeration, 177, 338-350. https://doi.org/10.1016/j.ijrefrig.2025.05.020
Hansen, C. (2025). Modern Perspectives on Wall-Bounded Turbulence Modeling: Merging Physics-based and Data-Driven Approaches. [PhD dissertation, Aarhus University].
Jacobsen, A. N., Mahravan, E., Kragh-Schwarz, M. V., Catalano, J. & Fooroghi, P. (2025). Multiphysics simulations of alkaline water electrolyzer cells — A sensitivity study on the effect of two-phase flow modeling. Electrochimica Acta, 541, Article 147148. https://doi.org/10.1016/j.electacta.2025.147148
Spangsberg, E., Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Multiscale Modelling of Heat Transfer in Selective Laser Sintering. engrXiv. https://doi.org/10.31224/4704
Li, W., Negahban, M., Zhang, W., Zhang, L. & Zhu, J. (2025). Network yield and detangling as a tool for modeling back-stress network softening: A thermodynamically consistent model for polycarbonate. International Journal of Engineering Science, 215, Article 104322. https://doi.org/10.1016/j.ijengsci.2025.104322
Bazmohammadi, N., Madary, A., Vasquez, J. C. & Guerrero, J. M. (2025). New Horizons for Control and Energy Management of Closed-Ecological Systems: Insights and Future Trends. IEEE Industrial Electronics Magazine, 19(1), 2-14. https://doi.org/10.1109/MIE.2024.3437341
Taffetani, M. & Pezzulla, M. (2025). Nonlinear morphoelastic energy based theory for stimuli responsive elastic shells. ArXiv.
Ostrowski, H., Sandberg, M. & Budzik, M. K. (2025). Novel fracture mechanics tests for thin 3D printed materials. Abstract from EPF European Polymer Congress, Groningen, Netherlands.
Niknafs, S., Silani, M., Concli, F. & Aghababaei, R. (2025). Numerical analysis of fatigue crack propagation using a coarse-grained molecular dynamics approach. International Journal of Solids and Structures, 311, Article 113245. https://doi.org/10.1016/j.ijsolstr.2025.113245
Malekan, M., Madsen, K. L., Airao, J., Ilvig, C. F. & Aghababaei, R. (2025). Numerical assessment of tool geometry for improving productivity in milling stainless steel 316 L. International Journal of Advanced Manufacturing Technology, 136(7), 3451-3463. Article 109782. https://doi.org/10.1007/s00170-025-15061-5
Rahdan, P. (2025). On the role of solar photovoltaics and demand management in the transition of the European energy system to net-zero emissions. [PhD dissertation, Aarhus University]. Aarhus University Library.
Wei, R., Alfaro, E., Wang, T. & Wu, M. (2025). Optimizing In-Situ Strengthening of Low-Strength Porous Mortar Using a Definitive Screening Design Study. Paper presented at The 2nd International Conference on Net-Zero Built Environment: Innovations in Materials, Structures, and Management, Cape Town, South Africa.
Paggetti, F., Gherardini, M., Lucantonio, A. & Cipriani, C. (2025). Optimizing the Myokinetic Interface: A Finite Element Model to Predict Displacement in Amputated Muscles. In 2025 International Conference on Rehabilitation Robotics, ICORR 2025 (pp. 376-381). IEEE Computer Society Press. https://doi.org/10.1109/ICORR66766.2025.11063137
Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Particle Flow and Printing Path Effects in SLS. Abstract from EPF European Polymer Congress, Groningen, Netherlands.
Lawson, N. J., Migliorini, M., Doll, U., Melnikov, S., Steinbock, J., Dues, M., Zachos, P. K., Röhle, I. & MacManus, D. G. (2025). Pathway to Non-Intrusive In-Flight Flow Diagnostics with Filtered Rayleigh Scattering. SAE International Journal of Aerospace, 19(1). https://doi.org/10.4271/01-19-01-0001
Hassan, H., Chatterjee, A., Bushagour, A. & Layton, A. (2025). POTENTIAL FOR DIGITAL TECHNOLOGIES AND ADDITIVE MANUFACTURING TO SUPPORT LEAN MANUFACTURING AND CIRCULAR ECONOMY SYNERGIES. In International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: Volume 2A: 45th Computers and Information in Engineering Conference (CIE) Article v02at02a040 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2025-169490
Karupppasamy, S. (2025). Pragmatic customization in medical device design for sustainable healthcare. In P. Kyratsis, A. Manavis & P. J. Davim (Eds.), CAD/CAM: Computer-Aided Design and Manufacturing, (pp. 143). De Gruyter. https://doi.org/10.1515/9783111585062-007
Bardella, L. & Jensen, H. M. (2025). Preface: Thematic session SM12 on Plasticity, Viscoplasticity and Creep of the 26th International Congress of Theoretical and Applied Mechanics (ICTAM2024). International Journal of Solids and Structures, 322, Article 113624. https://doi.org/10.1016/j.ijsolstr.2025.113624
Paggi, M. & Aghababaei, R. (2025). Preface: Contact Mechanics and Tribology in the ICTAM Century. International Journal of Solids and Structures, 323, Article 113642. https://doi.org/10.1016/j.ijsolstr.2025.113642
Kirikova, M., Forbrig, P. & Møller, C. (2025). Preface: 10th Workshop on Managed Complexity (ManComp). CEUR Workshop Proceedings, 4034. https://ceur-ws.org/Vol-4034/preface.pdf
Gallego-Castillo, C. & Victoria, M. (2025). PyPSA-Spain: An extension of PyPSA-Eur to model the Spanish energy system. Energy Strategy Reviews, 60, Article 101764. https://doi.org/10.1016/j.esr.2025.101764
Ip, Y. C. A., Montemartini, L., Chang, J. J. M., Desiderato, A., Franco-Sierra, N. D., Geckeler, C., Herrera, M. A. G., Gregorini, M., Jucker, M., Kirchgeorg, S., Lüthi, M., Mächler, E., Thostrup, F. B., Murari, G., Mura, M., Pulido-Santacruz, P., Sangermano, F., Schindler, T., Melvad, C. ... Deiner, K. (2025). Real-time malaria detection in the Amazon rainforest via drone-collected eDNA and portable qPCR. One Health, 21, Article 101167. https://doi.org/10.1016/j.onehlt.2025.101167
Poulsen, E., Rysgaard, S., Melvad, P. & Melvad, C. (2025). Rugged, low-cost, and lightweight rosette water sampler for ocean profiling and mooring deployment. HardwareX, 22, Article e00661. https://doi.org/10.1016/j.ohx.2025.e00661
Clausen, J. B. B., Møller, C., Asmussen, C. & Jørgensen, S. (2025). Self-service business intelligence systems in production domains: Introducing data democratization and mass customizable mashups. Digital Business, 5(2), Article 100156. https://doi.org/10.1016/j.digbus.2025.100156
Ulriksen, M. D. & Bernal, D. (2025). Sensitivity-based model updating with parameter rejection. Applied Mathematical Modelling, 148, Article 116253. https://doi.org/10.1016/j.apm.2025.116253
Zeyen, E., Kalweit, S., Victoria, M. & Brown, T. (2025). Shifting burdens: how delayed decarbonisation of road transport affects other sectoral emission reductions. Environmental Research Letters, 20(4), Article 044044. https://doi.org/10.1088/1748-9326/adc290
Calafà, M., Jensen, H. M. & Andriollo, T. (2025). Solving plane crack problems via enriched holomorphic neural networks. Engineering Fracture Mechanics, 322, Article 111133. https://doi.org/10.1016/j.engfracmech.2025.111133
Manti, S., Mohammadian, S., Treiber, M. & Lucantonio, A. (2025). SR-Traffic: Discovering Macroscopic Traffic Flow Models with Symbolic Regression. 1-7. https://ml4physicalsciences.github.io/2025/files/NeurIPS_ML4PS_2025_105.pdf
Rahdan, P., Zeyen, E. & Victoria, M. (2025). Strategic deployment of solar photovoltaics for achieving self-sufficiency in Europe throughout the energy transition. Nature Communications, 16(1), Article 6259. https://doi.org/10.1038/s41467-025-61492-9
Talasila, P., Tcherniak, D., Jensen, A. M. D., Mahato, S., Schörghofer-Queiroz, A., Ulriksen, M. D., Abbiati, G., Larsen, P. G. & Damkilde, L. (2025). Structural Health Monitoring of Engineering Structures Using Digital Twins: A Digital Twin Platform Approach. In Á. Cunha & E. Caetano (Eds.), Experimental Vibration Analysis for Civil Engineering Structures, EVACES 2025 - Volume 1 (pp. 986-996). Springer Science+Business Media. https://doi.org/10.1007/978-3-031-96110-6_98
Aher, G. R. (2025). Supporting Design Space Exploration for Circular Product Design. [PhD dissertation, Aarhus University].
Manti, S., Tsai, P.-H., Lucantonio, A. & Iliescu, T. (2025). Symbolic regression of data-driven reduced order model closures for under-resolved, convection-dominated flows. Journal of Computational Physics, 540, Article 114298. https://doi.org/10.1016/j.jcp.2025.114298
Xie, Z. (2025). System Perspectives on Hydrogen in Europe's Renewable Transition. [PhD dissertation, Aarhus University].
Alamia, A., Ambrose, H. W. & Rattigan, E. (2025). Techno-Economic Integration of Power-to-X Methanation in Biogas Systems: System-Level Optimization Based on Experimental Research. Poster session presented at 33rd European Biomass Conference & Exhibition , Valencia, Spain.
Nissen Pedersen, L. A., Don, J., Melvad, C. & Rysgaard, S. (2025). Temperature string device (TSD): A new low-cost instrument for sea ice observations in remote areas. HardwareX, 23, Article e00668. https://doi.org/10.1016/j.ohx.2025.e00668
Lerchl, T., Strack, D., Allaire, B., Yee, E., Scott, R., Nispel, K., Moeller, H., Graf, R., Karupppasamy, S., Kirschke , J. S., Bouxsein, M. L. & Anderson, D. E. (2025). THE EFFECTS OF PREVALENT VERTEBRAL FRACTURES ON SPINAL BIOMECHANICS. Abstract from 20th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Barcelona, Spain. https://www.researchgate.net/publication/397941200_THE_EFFECTS_OF_PREVALENT_VERTEBRAL_FRACTURES_ON_SPINAL_BIOMECHANICS
E.F. Athanasiadis, A., Duncan, O., Budzik, M. K. & Dias, M. A. (2025). Toughness of Confined Auxetic Foams. Advanced Engineering Materials, 27(17), Article 2500626. https://doi.org/10.1002/adem.202500626
Rehman, A. U., Ijaz, S., Niazi, K. A. K., Tauqeer, T., Usman, M., Zubair, M. & Mehmood, M. Q. (2025). Towards sustainable Agri-Photovoltaics through system design and viability in Semi-Arid conditions. Solar Energy, 299, Article 113682. https://doi.org/10.1016/j.solener.2025.113682
Kristiansen, M. F., Rasmussen, S. & Mikkelsen, L. P. (2025). Transforming load-controlled fatigue test data into a strain-based SN-curve: Results for unidirectional non-crimp glass fiber/epoxy composites tested in tension-tension. IOP Conference Series: Materials Science and Engineering, 1338(1), Article 012018. https://doi.org/10.1088/1757-899X/1338/1/012018
Airao, J., Jain, A., Nirala, C. K. & Unune, D. (2025). Tribological performance in micro-milling of Ti6Al4V under nanofluid-based minimum quantity lubrication. International Journal on Interactive Design and Manufacturing, 19(3), 1807-1819. https://doi.org/10.1007/s12008-024-01856-5
Sandhu, K., Sarkar, P. & Karupppasamy, S. (2025). Understanding entrepreneurial thinking for designers: Perspectives from entrepreneurs, academicians, product designers, and students. Thinking Skills and Creativity, 56, Article 101728. https://doi.org/10.1016/j.tsc.2024.101728
Kaur, S., Sandhu, K., Sarkar, P. & Subburaj, K. (2025). Understanding User Experience: Exploration of Various Definitions Using Natural Language Process. In A. Chakrabarti, V. Singh, P. S. Onkar & M. Shahid (Eds.), Responsible and Resilient Design for Society: Proceedings of ICoRD 2025 (Vol. 4, pp. 231-241). Springer. https://doi.org/10.1007/978-981-96-5495-6_18

Displaying results 101 to 150 out of 560

Previous

1

2

3

4

5

6

7

8

9

10

Next

Revised 22.02.2024
-
AU Engineering