Find

For students
For PhDs
For employees

Department of Mechanical and Production Engineering

Publications

Below you can find a complete list of the publications that are written by employees at the Publications at Department of Mechanical and Production Engineering for example journal articles, books, reports etc.

Publication list

Sort by: Date | Author | Title

Fulco , S., Budzik, M. K. & T. Turner , K. T. (2024). Enhancing toughness through geometric control of the process zone. Journal of the Mechanics and Physics of Solids, 184, Article 105548. https://doi.org/10.1016/j.jmps.2024.105548

Palade, D., Møller, C. & Hansen, A. K. (2024). Enterprise Integration as a Driving Factor for Guiding Digitalization in a Manufacturing Small and Medium Enterprise. Complex Systems Informatics and Modeling Quarterly, 2024(39), 48-64. https://doi.org/10.7250/csimq.2024-39.03

Arumugam, V. K., Mantzaras, J., Gantenbein, A., Doll, U. & Schildhauer, T. (2024). Experimental and numerical investigation of high-pressure methane catalytic synthesis from H2 and CO2. Proceedings of the Combustion Institute, 40(1-4), Article 105206. https://doi.org/10.1016/j.proci.2024.105206

Subasic, M., Ireland, A., Mansour, R., Enblom, P., Krakhmalev, P., Åsberg, M., Fazi, A., Gårdstam, J., Shipley, J., Waernqvist, P., Forssgren, B. & Efsing, P. (2024). Experimental investigation and numerical modelling of the cyclic plasticity and fatigue behavior of additively manufactured 316 L stainless steel. International Journal of Plasticity, 176, Article 103966. https://doi.org/10.1016/j.ijplas.2024.103966

Ghasemi, A., Sadough Vanini, S. A., Alizadeh Zolbin, M. & Aghababaei, R. (2024). Exploring the influence of ultrasonic peening treatment at ambient and cryogenic conditions on the surface characteristics and fatigue life of austenitic stainless steel 304L. Surface and Coatings Technology, 494(Part 1 ), Article 131382. https://doi.org/10.1016/j.surfcoat.2024.131382

Islam, R., Madsen, S. P. & Christensen, M. (2024). Exploring the magnetic properties of W-type SrFe18O27 hexaferrite: Insights from a first-principles study. Physical Review B, 109(2), Article 024414. https://doi.org/10.1103/PhysRevB.109.024414

Hansen, C., Sørensen, J. N., I. A. Yang, X. & Abkar, M. (2024). Extension of the law of the wall exploiting weak similarity of velocity fluctuations in turbulent channels. Physics of Fluids, 36(1), Article 015134. https://doi.org/10.1063/5.0185334

Rygg Johnsen, A., Petersen, J. E., Pedersen, M. M. & Yildirim, H. C. (2024). Factors affecting the fatigue strength of additively manufactured Ti-6Al-4V parts. Welding in the World, 68(2), 361-409. https://doi.org/10.1007/s40194-023-01604-5

Bokharaie, B.-U., Aghababaei, R., Dias, M. A. & Budzik, M. K. (2024). Failure of 3D-printed composite continuous carbon fibre hexagonal frames. Composites Part B: Engineering, 275, Article 111307. https://doi.org/10.1016/j.compositesb.2024.111307

Subasic, M., Olsson, M., Dadbakhsh, S., Zhao, X., Krakhmale, P. & Mansour, R. (2024). Fatigue strength improvement of additively manufactured 316L stainless steel with high porosity through preloading. International Journal of Fatigue, 180, Article 108077. https://doi.org/10.1016/j.ijfatigue.2023.108077

Rincón, M. J., Caspersen, A., Thorenfeldt Ingwersen, N., Reclari, M. & Abkar, M. (2024). Flow investigation of two-stand ultrasonic flow meters in a wide dynamic range by numerical and experimental methods. Flow Measurement and Instrumentation, 96, Article 102543. https://doi.org/10.1016/j.flowmeasinst.2024.102543

Sahli, R., Mikkelsen, J., Boye, M. S., Dias, M. A. & Aghababaei, R. (2024). Frictional Contact of Soft Polymeric Shells. Physical Review Letters, 133(10), Article 106202. https://doi.org/10.1103/PhysRevLett.133.106202

Alvandifar, N., Kristofersson, J. & Forooghi, P. (2024). Frost formation non-uniformity in a multi-circuit V-shape evaporator. International Journal of Refrigeration, 157, 137-149. https://doi.org/10.1016/j.ijrefrig.2023.10.018

Nguyen, V. H., Oh, S., Mahato, M., Tabassian, R., Yoo, H., Lee, S. G., Garai, M., Kim, K. J. & Oh, I. K. (2024). Functionally antagonistic polyelectrolyte for electro-ionic soft actuator. Nature Communications, 15(1), Article 435. https://doi.org/10.1038/s41467-024-44719-z

Hu, P., Dias, M. A. & Budzik, M. K. (2024). Geometric tunability of interlaminar resistance. Composites Part B: Engineering, 287, Article 111839. https://doi.org/10.1016/j.compositesb.2024.111839

Wu, Z. & Møller, C. (2024). Global Sales and Operations Planning: exploring transitional pathway from a fit perspective. IFAC-PapersOnLine, 58(27), 1200-1209.

Farah, S. (2024). Green hydrogen production: cost and CO2 emissions co-optimisation. 172-176. Poster session presented at Aarhus Power-to-X Symposium 2024, Aarhus, Denmark. https://doi.org/10.1049/icp.2024.1834

I. A. Yang, X., Abkar, M. & I. Park, G. (2024). Grid Convergence Properties of Wall-Modeled Large Eddy Simulations in the Asymptotic Regime. Journal of Fluids Engineering, Transactions of the ASME, 146(8), Article 081501. https://doi.org/10.1115/1.4064850

I. A. Yang, X. & Abkar, M. (2024). Grid Convergence Properties of Wall-Modeled Large-Eddy Simulations in the Asymptotic Regime. In ASME 2023 International Mechanical Engineering Congress and Exposition: Fluids Engineering (Vol. 9). Article IMECE2023-116581, V009T10A017 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/IMECE2023-116581

Almskou, T. & Olesen, P. H. (2024). Grundrids af teknisk tegning. (6. ed.) Akademisk Forlag.

Lubineau, G., Alfano, M., Tao, R., Wagih, A., Yudhanto, A., Li, X., Almuhammadi, K., Hashem, M., Hu, P., Mahmoud, H. A. & Oz, F. (2024). Harnessing Extrinsic Dissipation to Enhance the Toughness of Composites and Composite Joints: A State-of-the-Art Review of Recent Advances. Advanced Materials, 36(51), Article 2407132. https://doi.org/10.1002/adma.202407132

singh, G., Mitra, T., Madsen, S. P. & Dantan, A. R. (2024). Highly reflective and high-Q thin resonant subwavelength gratings. Journal of Physics: Photonics, 6(4), Article 045009. https://doi.org/10.1088/2515-7647/ad70e7

Islam, R., Vero, K. & Borah, J. P. (2024). Historical overview and recent advances in permanent magnet materials. Materials Today Communications, 41, Article 110538. https://doi.org/10.1016/j.mtcomm.2024.110538

Strack, D., Mesbah, M., Manohar Rayudu, N., Baum, T., Kirschke , J. S. & Karupppasamy, S. (2024). IMPACT OF ANNULUS FIBROSUS STIFFNESS ON THE FRACTURE LOAD OF FUNCTIONAL SPINE UNITS. Orthopaedic Proceedings, 102. https://doi.org/10.1302/1358-992X.2024.18.102

Wang, C., Cong, D., Tang, G., Zhou, X. & Li, J. (2024). Improving thermoelectric properties in double half-Heusler M₈Fe_xNi_8−xSb₈ (M = TiZrHfNb)-InSb compounds via synergistic multiscale defects and high-mobility carrier injection. Chemical Engineering Journal, 496, Article 154313. https://doi.org/10.1016/j.cej.2024.154313

Ma, L., Nemati, N., Kim, D. E. & Aghababaei, R. (2024). Interface Amorphization Controls Maximum Wear Resistance of Multinanolayer DLC/WC Coatings. ACS Applied Materials and Interfaces, 16(14), 18090-18098. https://doi.org/10.1021/acsami.3c18218

Borbolla Muñoz, A., Nezar Aboujarra, M. & Ramanujan, D. (2024). Investigating Sustainable Production Planning of an Industrial Progressive Die Stamping Process Using Discrete Event Simulation. In 29th Design for Manufacturing and the Life Cycle Conference (DFMLC): 29th Design for Manufacturing and the Life Cycle Conference (DFMLC) (Vol. 5). Article V005T05A006 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2024-143648

Jensen, J. S. K. (2024). Investigation of three-body abrasive sand wear in submersible pumps. [PhD dissertation, Aarhus University]. Aarhus University.

Farah, S. & Bruun Andresen, G. (2024). Investment-based optimisation of energy storage design parameters in a grid-connected hybrid renewable energy system. Applied Energy, 355, Article 122384. https://doi.org/10.1016/j.apenergy.2023.122384

Ulriksen, M. D. & Bernal, D. (2024). Localization of earthquake-induced structural damage using output feedback eigenstructure assignment. In 18th World Conference on Earthquake Engineering (WCEE2024)

Tabassian, R., Rajabi-Abhari, A., Mahato, M., Yoo, H., Yoon, H. Y., Park, J. Y. & Oh, I. K. (2024). Metal-organic framework-based nanofibrous film for two different modes of triboelectric nanogenerators. SmartMat, 5(5), Article e1270. https://doi.org/10.1002/smm2.1270

Tørring, P. & Vestergaard, J. B. (2024). Metanol i Fiskeriet: Milepælsrapport . Aquamind A/S.

Wieber, C., Jeppesen, M. R., Finster, K., Melvad, C. & Santl-Temkiv, T. (2024). Micro-PINGUIN: microtiter-plate-based instrument for ice nucleation detection in gallium with an infrared camera. Atmospheric Measurement Techniques, 17(9), 2707–2719. https://doi.org/10.5194/amt-17-2707-2024

Alamia, A. & Bruun Andresen, G. (2024). Modelling Alternatives for integrted PtX infrastrcture between Denmark and EU. Poster session presented at 12th European Open Energy Modelling Workshop, Grenoble, France.

Abbiati, G., Gomes, C., Sandberg, M., Kazemi, Z., Hansen, S. T. & Larsen, P. G. (2024). Modelling for Digital Twins. In J. Fitzgerald, C. Gomes & P. G. Larsen (Eds.), The Engineering of Digital Twins (pp. 89-127). Springer. https://doi.org/10.1007/978-3-031-66719-0_5

Ninno, F., Chiastra, C., Colombo, M., Dardik, A., Strosberg, D., Aboian, E., Tsui, J., Bartlett, M., Balabani, S. & Díaz-Zuccarini, V. (2024). Modelling lower-limb peripheral arterial disease using clinically available datasets: impact of inflow boundary conditions on hemodynamic indices for restenosis prediction. Computer Methods and Programs in Biomedicine, 251, Article 108214. https://doi.org/10.1016/j.cmpb.2024.108214

Moon, J., Mahravan, E. & Kim, D. (2024). Mutual interaction of a collapsing bubble and a nearby viscoelastic solid. Physical Review Fluids, 9(4), Article 043603. https://doi.org/10.1103/PhysRevFluids.9.043603

Mitra, T., singh, G., Darki, A. A., Madsen, S. P. & Dantan, A. R. (2024). Narrow-linewidth Fano microcavities with resonant subwavelength grating mirror. Optics Express, 32(9), 15667-15679. https://doi.org/10.1364/OE.521329

Sadik, S. & Yavari, A. (2024). Nonlinear anisotropic viscoelasticity. Journal of the Mechanics and Physics of Solids, 182, Article 105461. https://doi.org/10.1016/j.jmps.2023.105461

Sujon, M. A. S., Masato, D., Andriollo, T., Pan, Z., Nadimpalli, V. K., Henriquez, V. C. & Islam, A. (2024). Novel approach for optimizing mechanical and damping performance of MABS composites reinforced with basalt fibers: An experimental study. Composites Science and Technology, 251, Article 110578. https://doi.org/10.1016/j.compscitech.2024.110578

Zheng, W., Ma, L., Pei, S. & Aghababaei, R. (2024). Numerical assessment of transition in cutting mode and its effect on roughness creation. International Journal of Mechanical Sciences, 261, Article 108666. https://doi.org/10.1016/j.ijmecsci.2023.108666

Šeta, B., Sandberg, M., Brander, M., Mollah, M. T., Pokkalla, D. K., Kumar, V. & Spangenberg, J. (2024). Numerical modeling of fiber orientation in multi-layer, isothermal material-extrusion big area additive manufacturing. Additive Manufacturing, 92, Article 104396. https://doi.org/10.1016/j.addma.2024.104396

Langthjem, M. A. & Jensen, H. M. (2024). On matched asymptotic expansion solutions of a bucklewave propagation problem. Zeitschrift fuer Angewandte Mathematik und Mechanik, 104(5), 1. Article e202300655. https://doi.org/10.1002/zamm.202300655

E.F. Athanasiadis, A., Budzik, M. K., Fernando, D. & Dias, M. A. (2024). On micropolar elastic foundations. European Journal of Mechanics A - Solids, 105, Article 105277. https://doi.org/10.1016/j.euromechsol.2024.105277

Cremoncini, D., Frate, G. F., Bischi, A., Pedersen, T. T., Bruun Andresen, G., Bentien, A. & Ferrari, L. (2024). Optimal participation of a wind and hybrid battery storage system in the day-ahead and automatic frequency restoration reserve markets. Journal of Energy Storage, 94, Article 112309. https://doi.org/10.1016/j.est.2024.112309

Alamia, A., Partoon, B., Rattigan, E. & Bruun Andresen, G. (2024). Optimizing hydrogen and e-methanol production through Power-to-X integration in biogas plants. Energy Conversion and Management, 322, Article 119175. https://doi.org/10.1016/j.enconman.2024.119175

Strack, D., Manohar Rayudu, N., Kirschke , J. S., Baum, T. & Karupppasamy, S. (2024). OPTIMIZING PATIENT-SPECIFIC BONE FINITE ELEMENT ANALYSIS: MESH CONVERGENCE AND MATERIAL GROUPING STRATEGIES. Orthopaedic Proceedings, 127. https://doi.org/10.1302/1358-992X.2024.18.127

Garg, H., Ledda, P. G., Skov Pedersen, J. & Pezzulla, M. (2024). Passive Viscous Flow Selection via Fluid-Induced Buckling. Physical Review Letters, 133(8), Article 084001. https://doi.org/10.1103/PhysRevLett.133.084001

Ulriksen, M. D., Greś, S. & Bernal, D. (2024). Perturbation-invariant eigenvalue assignment for statistical damage localization. Journal of Physics: Conference Series, 2647, Article 192017. https://doi.org/10.1088/1742-6596/2647/19/192017

Calafà, M., Hovad, E., Engsig-Karup, A. P. & Andriollo, T. (2024). Physics-Informed Holomorphic Neural Networks (PIHNNs): Solving 2D linear elasticity problems. Computer Methods in Applied Mechanics and Engineering, 432, Article 117406. https://doi.org/10.1016/j.cma.2024.117406

Displaying results 201 to 250 out of 553

5

Revised 22.02.2024

-

AU Engineering