Find

For students
For PhDs
For employees

Department of Mechanical and Production Engineering

Publications by Mechanics and Materials

Are you looking for publications by Mechanics and Materials? On this page you can find all the publications made by the Mechanics and Materials - Department of Mechanical and Production Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Zhu, J., Li, X., Zhou, Q. & Aghababaei, R. (2022). On the anisotropic scratching behavior of single crystalline copper at nanoscale. Tribology International, 175, Article 107794. https://doi.org/10.1016/j.triboint.2022.107794

Zhu, J. & Aghababaei, R. (2023). On the size effect in scratch and wear response of single crystalline copper. Tribology International, 186, Article 108573. https://doi.org/10.1016/j.triboint.2023.108573

Zhu, J., Xiao, J., Zhou, Q. & Aghababaei, R. (2024). Effect of grain boundary on scratch behavior of polycrystalline copper. International Journal of Mechanical Sciences, 272, Article 109175. https://doi.org/10.1016/j.ijmecsci.2024.109175

Zheng, W., Ma, L., Pei, S. & Aghababaei, R. (2024). Numerical assessment of transition in cutting mode and its effect on roughness creation. International Journal of Mechanical Sciences, 261, Article 108666. https://doi.org/10.1016/j.ijmecsci.2023.108666

Zhang, Z., Zhang, L., Jasa, J., Negahban, M. & Gazonas, G. (2022). Molecular sources of ratcheting in poly-dispersed polycarbonate. International Journal of Fatigue, 154, Article 106567. https://doi.org/10.1016/j.ijfatigue.2021.106567

Won, J., Bae, J., Kim, H., Kim, T., Nemati, N., Choi, S., Jung, M. C., Kim, S., Choi, H., Kim, B., Jin, D., Kim, M., Han, M. J., Kim, J. Y. & Shim, W. (2023). Polytypic Two-Dimensional FeAs with High Anisotropy. Nano Letters, 23(23), 11057-11065. https://doi.org/10.1021/acs.nanolett.3c03324

Vero, K., Islam, R. & Borah, J. P. (2023). First-principles study on the enhancement of structure stability and magnetocrystalline anisotropy energy of L1₀-ordered Mn_1−xFe_xAlC compound for permanent magnet application. Journal of Applied Physics, 134(15), Article 153902. https://doi.org/10.1063/5.0172356

van Innis, C., Budzik, M. K. & Pardoen, T. (2025). Bridging in co-cured composite joints. International Journal of Solids and Structures, 309, Article 113194. https://doi.org/10.1016/j.ijsolstr.2024.113194

van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2022). Composite joint toughening by multiscale architecturing through integrated manufacturing. Abstract from The 11th European Solid Mechanics , Galway, Ireland. file:///C:/Users/au564491/Downloads/vanInnis_esmc2022%20(1).pdf

van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2023). Ultra tough architected joints through single step bonding process with tunable properties. 205. Abstract from International Conference on Adhesive Bonding 2023, Porto, Portugal.

van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2024). Ultra-tough architected adhesive joints for integrated composite processing and bonding. Composites Part A: Applied Science and Manufacturing, 177, Article 107949. https://doi.org/10.1016/j.compositesa.2023.107949

van Innis, C. V. I., Budzik, M. K. & Pardoen, T. (2024). Ultra tough architected joints through single manufacturing step. Abstract from 9th International Conference on Fracture of Polymers, Composites and Adhesives, Switzerland.

Truong, T. T., Airao, J., Hojati, F., Ilvig, C. F., Azarhoushang, B., Karras, P. & Aghababaei, R. (2024). Data-driven prediction of tool wear using Bayesian regularized artificial neural networks. Measurement: Journal of the International Measurement Confederation, 238, Article 115303. https://doi.org/10.1016/j.measurement.2024.115303

Traistaru, O. T. L., Shyam, P., Christensen, M. & Madsen, S. P. (2022). Optimizing the energy product of exchange-coupled soft/hard Zn_0.2Fe_2.8O₄/SrFe₁₂O₁₉magnets. Journal of Applied Physics, 132(16), Article 163904. https://doi.org/10.1063/5.0103242

Teixeira de Freitas, S., Roos, L., Papadakis, L., Sena-Cruz, J. & Budzik, M. K. (2022, Feb). COST Action CA18120: Reliable roadmap for certification of bonded primary structures APPLICATION FOR COST GRANTS. EU. https://certbond.eu/wp-content/uploads/Certbond-Guidelines_COST-Grants_v20221114.pdf

Teixeira de Freitas, S. & Budzik, M. K. (2023). Bondline thickness: Fracture mechanics perspective. In D. A. Dillard (Ed.), Advances in Structural Adhesive Bonding, Second Edition (2 ed., pp. 615-641). Woodhead Publishing. https://doi.org/10.1016/B978-0-323-91214-3.00027-2

Sujon, M. A. S., Masato, D., Andriollo, T., Pan, Z., Nadimpalli, V. K., Henriquez, V. C. & Islam, A. (2024). Novel approach for optimizing mechanical and damping performance of MABS composites reinforced with basalt fibers: An experimental study. Composites Science and Technology, 251, Article 110578. https://doi.org/10.1016/j.compscitech.2024.110578

Sivebaek, I. M., Aghababaei, R. & Espallargas, N. (2024). Editorial: Selected papers from NORDTRIB 2022. Wear, 544-545, Article 205183. https://doi.org/10.1016/j.wear.2023.205183

singh, G., Mitra, T., Madsen, S. P. & Dantan, A. R. (2024). Highly reflective and high-Q thin resonant subwavelength gratings. Journal of Physics: Photonics, 6(4), Article 045009. https://doi.org/10.1088/2515-7647/ad70e7

Shojaeifard, M., Ferraresso, M., Lucantonio, A. & Bacca, M. (2025). Machine learning-based optimal design of fibrillar adhesives. Journal of the Royal Society Interface, 22(223), Article 20240636. https://doi.org/10.1098/rsif.2024.0636

Sahli, R., Mikkelsen, J., Boye, M. S., Dias, M. A. & Aghababaei, R. (2024). Frictional Contact of Soft Polymeric Shells. Physical Review Letters, 133(10), Article 106202. https://doi.org/10.1103/PhysRevLett.133.106202

Sadik, S., Walker, M. G. & Dias, M. A. (2022). On local kirigami mechanics II: Stretchable creased solutions. Journal of the Mechanics and Physics of Solids, 161, Article 104812. https://doi.org/10.1016/j.jmps.2022.104812

Sadik, S. & Yavari, A. (2024). Nonlinear anisotropic viscoelasticity. Journal of the Mechanics and Physics of Solids, 182, Article 105461. https://doi.org/10.1016/j.jmps.2023.105461

Sadik, S. & Yavari, A. (2025). A Generalised Coleman-Noll Procedure and the Balance Laws of Hyper-Anelasticity. https://doi.org/10.48550/arXiv.2403.14543

Rao, S., Budzik, M. K. & Dias, M. A. (2022). On microscopic analysis of fracture in unidirectional composite material using phase field modelling. Composites Science and Technology, 220, Article 109242. https://doi.org/10.1016/j.compscitech.2021.109242

Pardoen, T., T. Turner , K. T. & Budzik, M. K. (2023). Architected adhesive joints with improved fracture toughness. In D. A. Dillard (Ed.), Advances in Structural Adhesive Bonding (2 ed., pp. 1105-1122). Woodhead Publishing. https://doi.org/10.1016/B978-0-323-91214-3.00012-0

Paraskevoulakos, C., Ghosh, S., Andriollo, T. & Michel, A. (2024). Sensitivity Study Using Synthetic 3D Image Datasets to Investigate the Effect of Noise Artefacts on Digital Volume Correlation. Experimental Mechanics, 64(5), 595-624. https://doi.org/10.1007/s11340-024-01046-0

Norouzikudiani, R., Lucantonio, A. & DeSimone, A. (2023). Equilibrium and transient response of photo-actuated Liquid Crystal Elastomer beams. Mechanics Research Communications, 131, Article 104126. https://doi.org/10.1016/j.mechrescom.2023.104126

Nitschke, I., Sadik, S. & Voigt, A. (2024). Tangential Tensor Fields on Deformable Surfaces – How to Derive Consistent L²-Gradient Flows. IMA Journal of Applied Mathematics, 88, 2023(6), 917-958. https://doi.org/10.1093/imamat/hxae006

Niknafs, S., Silani, M., Concli, F. & Aghababaei, R. (2022). A coarse-grained concurrent multiscale method for simulating brittle fracture. International Journal of Solids and Structures, 254-255, Article 111898. https://doi.org/10.1016/j.ijsolstr.2022.111898

Niknafs, S., Silani, M., Concli, F. & Aghababaei, R. (2025). Numerical analysis of fatigue crack propagation using a coarse-grained molecular dynamics approach. International Journal of Solids and Structures, 311, Article 113245. https://doi.org/10.1016/j.ijsolstr.2025.113245

Nemati, N., Manhard, A., Greuner, H., Hunger, K., Böswirth, B., Visca, E. & You, J. H. (2023). Microstructural evolution of tungsten under thermal loads: A comparative study between cyclic high heat flux loading and isochronous furnace heating. Nuclear Materials and Energy, 36, Article 101465. https://doi.org/10.1016/j.nme.2023.101465

Nasr Saleh, M., Budzik, M. K., Saeedifar, M., Zarouchas, D. & Teixeira de Freitas, S. (2022). On the influence of the adhesive and the adherend ductility on mode I fracture characterization of thick adhesively-bonded joints. International Journal of Adhesion and Adhesives, 115, Article 103123. https://doi.org/10.1016/j.ijadhadh.2022.103123

Movassagh-Alanagh, F., Abdollah-zadeh, A., Alizadeh Zolbin, M., Nemati, N. & Aghababaei, R. (2023). Plasma-enhanced chemical vapor deposition of TiB₂ and TiBN hard coatings using BBr₃. Tribology International, 179, Article 108137. https://doi.org/10.1016/j.triboint.2022.108137

Mitra, T., singh, G., Darki, A. A., Madsen, S. P. & Dantan, A. R. (2024). Narrow-linewidth Fano microcavities with resonant subwavelength grating mirror. Optics Express, 32(9), 15667-15679. https://doi.org/10.1364/OE.521329

Manti, S. & Lucantonio, A. (2024). Discovering interpretable physical models using symbolic regression and discrete exterior calculus. Machine Learning: Science and Technology, 5(1), Article 015005. https://doi.org/10.1088/2632-2153/ad1af2

Malekan, M., Ilvig, C. F. & Aghababaei, R. (2024). Effects of Edge Radius and Coating Thickness on the Cutting Performance of AlCrN-Coated Tool. International Journal of Precision Engineering and Manufacturing, 25(10), 2059-2075. https://doi.org/10.1007/s12541-024-01074-9

Malekan, M., Madsen, K. L., Airao, J., Ilvig, C. F. & Aghababaei, R. (2025). Numerical assessment of tool geometry for improving productivity in milling stainless steel 316 L. International Journal of Advanced Manufacturing Technology, 136(7), 3451-3463. Article 109782. https://doi.org/10.1007/s00170-025-15061-5

Ma, L. & Aghababaei, R. (2022). On the Effect of Adhesive Strength and Scratching Depth on Material Transfer During Nanoscale Scratching. Tribology Letters, 70(1), Article 26. https://doi.org/10.1007/s11249-021-01558-z

Ma, L. & Aghababaei, R. (2023). On the Uniqueness of Wear Coefficient for Abrasive Wear at Nanoscale. Journal of Tribology, 145(6), Article 062101. https://doi.org/10.1115/1.4062099

Ma, L. (2024). Atomic insights into the abrasive wear mechanisms of mono- and multi-layer coatings at the single asperity level. Aarhus University.

Ma, L., Nemati, N., Kim, D. E. & Aghababaei, R. (2024). Interface Amorphization Controls Maximum Wear Resistance of Multinanolayer DLC/WC Coatings. ACS Applied Materials and Interfaces, 16(14), 18090-18098. https://doi.org/10.1021/acsami.3c18218

Luo, X., Andriollo, T., Baxevanakis, K. P. & Silberschmidt, V. V. (2025). Microstructural effect on fracture evolution in spheroidal graphite iron: Numerical analysis. Engineering Failure Analysis, 174, Article 109459. https://doi.org/10.1016/j.engfailanal.2025.109459

Lubineau, G., Alfano, M., Tao, R., Wagih, A., Yudhanto, A., Li, X., Almuhammadi, K., Hashem, M., Hu, P., Mahmoud, H. A. & Oz, F. (2024). Harnessing Extrinsic Dissipation to Enhance the Toughness of Composites and Composite Joints: A State-of-the-Art Review of Recent Advances. Advanced Materials, 36(51), Article 2407132. https://doi.org/10.1002/adma.202407132

L.S. Hedvard, M., Dias, M. A. & Budzik, M. K. (2024). Toughening mechanisms and damage propagation in Architected-Interfaces. International Journal of Solids and Structures, 288, Article 112600. https://doi.org/10.1016/j.ijsolstr.2023.112600

Ledda, P. G., Pezzulla, M., Jambon-Puillet, E., Brun, P. T. & Gallaire, F. (2022). Gravity-driven coatings on curved substrates: a differential geometry approach. Journal of Fluid Mechanics, 949, Article A38. https://doi.org/10.1017/jfm.2022.758

Langthjem, M. A. & Jensen, H. M. (2024). On matched asymptotic expansion solutions of a bucklewave propagation problem. Zeitschrift fuer Angewandte Mathematik und Mechanik, 104(5), 1. Article e202300655. https://doi.org/10.1002/zamm.202300655

Khanna, N., Patel, D., Raval, P., Airao, J., Badheka, V. & Rahman Rashid, R. A. (2024). Comparison of sustainable cooling/lubrication strategies for drilling of wire arc additively manufactured Inconel 625. Tribology International, 200, Article 110068. https://doi.org/10.1016/j.triboint.2024.110068

Jensen, J. S. K. & Aghababaei, R. (2023). Experimental investigation of three-body wear for rubber seals in abrasive slurry environment. Wear, 534-535, Article 205131. https://doi.org/10.1016/j.wear.2023.205131

Islam, R. & Borah, J. P. (2023). 3d transition metal substituted Fe3Se4: prediction of potential permanent magnet. Journal of Physics: Condensed Matter, 35(32), Article 325801. https://doi.org/10.1088/1361-648X/acd319

Displaying results 1 to 50 out of 93

1

Back to the main page

Revised 19.12.2023

-

AU Engineering