Publications by Mechanics and Materials

Are you looking for publications by Mechanics and Materials? On this page you can find all the publications made by the Mechanics and Materials - Department of Mechanical and Production Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Langthjem, M. A. & Jensen, H. M. (2024). On matched asymptotic expansion solutions of a bucklewave propagation problem. Zeitschrift fuer Angewandte Mathematik und Mechanik, 104(5), 1. Article e202300655. https://doi.org/10.1002/zamm.202300655

Khanna, N., Patel, D., Raval, P., Airao, J., Badheka, V. & Rahman Rashid, R. A. (2024). Comparison of sustainable cooling/lubrication strategies for drilling of wire arc additively manufactured Inconel 625. Tribology International, 200, Article 110068. https://doi.org/10.1016/j.triboint.2024.110068

Jensen, J. S. K. & Aghababaei, R. (2023). Experimental investigation of three-body wear for rubber seals in abrasive slurry environment. Wear, 534-535, Article 205131. https://doi.org/10.1016/j.wear.2023.205131

Jensen, J. S. K., Esmizadeh, S., Lund, M., Juhl, J., Nemati, N. & Aghababaei, R. (2025). Evaluating the effect of particle roundness on three-body wear between polymers and metals. Wear, 570, Article 206000. https://doi.org/10.1016/j.wear.2025.206000

Islam, R. & Borah, J. P. (2023). 3d transition metal substituted Fe3Se4: prediction of potential permanent magnet. Journal of Physics: Condensed Matter, 35(32), Article 325801. https://doi.org/10.1088/1361-648X/acd319

Islam, R., Madsen, S. P. & Christensen, M. (2024). Exploring the magnetic properties of W-type SrFe18O27 hexaferrite: Insights from a first-principles study. Physical Review B, 109(2), Article 024414. https://doi.org/10.1103/PhysRevB.109.024414

Islam, R., Vero, K. & Borah, J. P. (2024). Historical overview and recent advances in permanent magnet materials. Materials Today Communications, 41, Article 110538. https://doi.org/10.1016/j.mtcomm.2024.110538

Islam, R., Madsen, S. P. & Christensen, M. (2025). Enhancing magnetocrystalline anisotropy in W-type SrFe₁₈O₂₇ hexaferrite via tailored substitutions. Acta Materialia, 288, 120828. Article 120828. https://doi.org/10.1016/j.actamat.2025.120828

Hund, J., Kouznetsova, V. & Andriollo, T. (2025). Efficient prediction of strength and strain localisation in porous solids via microstructure-based limit analysis. Mechanics of Materials, 201, Article 105208. https://doi.org/10.1016/j.mechmat.2024.105208

Hu, P., Dias, M. A. & Budzik, M. K. (2024). Geometric tunability of interlaminar resistance. Composites Part B: Engineering, 287, Article 111839. https://doi.org/10.1016/j.compositesb.2024.111839

Hu, P., Li, S. & Budzik, M. K. (2025). Decoupling fracture energy from crack area via surface patterning. Surfaces and Interfaces, 62, Article 106066. https://doi.org/10.1016/j.surfin.2025.106066

Hesselvig, J., Nygaard, R. T., Budzik, M. K. & Sandberg, M. (2025). Efficient continuum-based modelling and analysis of polymer SLS: Insights into particle sintering and densification in straight and corner scanning passes. Additive Manufacturing, 109, Article 104828. https://doi.org/10.1016/j.addma.2025.104828

Heide-Jørgensen, S., Budzik, M. K. & Ibsen, C. H. (2022). Three-dimensional, multiscale homogenization for hybrid woven composites with fiber-matrix debonding. Composites Science and Technology, 218, Article 109204. https://doi.org/10.1016/j.compscitech.2021.109204

Hansen, J. G. & de Figueiredo, R. P. (2024). Active Object Detection and Tracking Using Gimbal Mechanisms for Autonomous Drone Applications. Drones, 8(2), Article 55. https://doi.org/10.3390/drones8020055

Ghasemi, A., Sadough Vanini, S. A., Alizadeh Zolbin, M. & Aghababaei, R. (2024). Exploring the influence of ultrasonic peening treatment at ambient and cryogenic conditions on the surface characteristics and fatigue life of austenitic stainless steel 304L. Surface and Coatings Technology, 494(Part 1 ), Article 131382. https://doi.org/10.1016/j.surfcoat.2024.131382

Garg, H., Ledda, P. G., Skov Pedersen, J. & Pezzulla, M. (2024). Passive Viscous Flow Selection via Fluid-Induced Buckling. Physical Review Letters, 133(8), Article 084001. https://doi.org/10.1103/PhysRevLett.133.084001

Gao, X., Zhang, Y., Haahr-Lillevang, L., Vedel-Smith, N. K. & Andriollo, T. (2023). 3D strain pattern in additively manufactured AlSi10Mg from digital volume correlation. Heliyon, 9(12), Article e23186. https://doi.org/10.1016/j.heliyon.2023.e23186

Fulco , S., Budzik, M. K. & Turner, K. (2022). Exploiting architected plasticity to enhance fracture toughness while maintaining strength. Abstract from 19th U.S. National Congress of Theoretical and Applied

Mechanics, Austin, Texas, United States. https://drive.google.com/file/d/1uyFLy4Pk62paHMze4hVJSe7VnknWq1hT/view

Fulco , S., Budzik, M. K., D. Bain , E. & T. Turner , K. (2022). Decoupling toughness and strength through architected plasticity. Extreme Mechanics Letters, 57, Article 101912. https://doi.org/10.1016/j.eml.2022.101912

Fulco , S., Budzik, M. K. & T. Turner , K. T. (2024). Enhancing toughness through geometric control of the process zone. Journal of the Mechanics and Physics of Solids, 184, Article 105548. https://doi.org/10.1016/j.jmps.2024.105548

Fulco, S., Budzik, M. K., Xiao, H., Durian, D. J. & Turner, K. T. (2025). Disorder enhances the fracture toughness of 2D mechanical metamaterials. PNAS Nexus, 4(2), Article pgaf023. https://doi.org/10.1093/pnasnexus/pgaf023

E.F. Athanasiadis, A., Budzik, M. K., Fernando, D. & Dias, M. A. (2024). On micropolar elastic foundations. European Journal of Mechanics A - Solids, 105, Article 105277. https://doi.org/10.1016/j.euromechsol.2024.105277

Dias, M. A., Athanasiadis, A., Fernando, D. N. & Budzik, M. K. (2023). Micromechanics of architected interfaces. 73. Abstract from International Conference on Adhesive Bonding 2023, Porto, Portugal.

Dias, M. A., E.F. Athanasiadis, A., N. Fernando, D. & Budzik, M. K. (2024). Damage propagation in Architected-Interfaces. 1. Abstract from American Physical Society March Meeting 2024, Minneapolis , Minnesota, United States. https://meetings.aps.org/Meeting/MAR24/Session/Q35.10

Darki, A. A., Madsen, S. P. & Dantan, A. R. (2022). Polarization-independent optical spatial differentiation with a doubly-resonant one-dimensional guided-mode grating. Optics Express, 30(3), 3962-3972. https://doi.org/10.1364/OE.450981

Darki, A. A., Dantan, A., Nygaard, J. V., Madsen, S. P., Parthenopoulos, A., Toft-Vandborg, C. & Vandborg, C. (2022). Optical spatial differentiation with ultrathin freestanding subwavelength gratings. In P. Schelkens & T. Kozacki (Eds.), Optics, Photonics and Digital Technologies for Imaging Applications VII Article 121380D SPIE - International Society for Optical Engineering. https://doi.org/10.1117/12.2621186

Darabi, R., Oliveira, J. P., Nemati, N., Reis, A. & de Sá, J. C. (2025). Benchmarking advanced multiphase field modeling of Inconel 625 in additive manufacturing: Correlating powder bed fusion with dendrite growth and crack formation. Materialia, 40, Article 102384. https://doi.org/10.1016/j.mtla.2025.102384

Calafà, M., Hovad, E., Engsig-Karup, A. P. & Andriollo, T. (2024). Physics-Informed Holomorphic Neural Networks (PIHNNs): Solving 2D linear elasticity problems. Computer Methods in Applied Mechanics and Engineering, 432, Article 117406. https://doi.org/10.1016/j.cma.2024.117406

Calafà, M. (2024). Characterization of the angular coefficient method on 2D and 3D piecewise smooth boundaries. Computational and Applied Mathematics, 43(8), Article 450. https://doi.org/10.1007/s40314-024-02969-z

Calafà, M., Jensen, H. M. & Andriollo, T. (2025). Solving plane crack problems via enriched holomorphic neural networks. Engineering Fracture Mechanics, 322, Article 111133. https://doi.org/10.1016/j.engfracmech.2025.111133

Budzik, M. K., Wolfahrt, M., Reis, P., Kozłowski, M., Sena-Cruz, J., Papadakis, L., Nasr Saleh, M., V. Machalicka, K., Teixeira de Freitas, S. & P. Vassilopoulos, A. (2022). Testing mechanical performance of adhesively bonded composite joints in engineering applications: an overview. The Journal of Adhesion, 98(14), 2133-2209. https://doi.org/10.1080/00218464.2021.1953479

Budzik, M. K., Fulco , S. & Turner, K. (2022). Materials with architected plasticity and decoupled strength and toughness. Abstract from The 11th European Solid Mechanics , Galway, Ireland.

Budzik, M. K., Dias, M. A. & Hoffmann, U. S. (2023). Design of failure loads and crack growth by width varying interfaces. 142. Abstract from International Conference on Adhesive Bonding 2023, Porto, Portugal.

Budzik, M. K., Dias, M. A., Hedvard, M. & Athanasiadis, A. (2023). Failure of architected interfaces. 47. Abstract from International Conference on Adhesive Bonding 2023, Porto, Portugal.

Bokharaie, B., Aghababaei, R. & Budzik, M. K. (2022). Failure of additively manufactured carbon fiber composite hexagonal frames. Abstract from The 20th European Conference on Composite Materials, Lausanne, Switzerland. file:///C:/Users/au564491/Downloads/Abstracts_Monday.pdf

Bokharaie, B.-U., Aghababaei, R., Dias, M. A. & Budzik, M. K. (2024). Failure of 3D-printed composite continuous carbon fibre hexagonal frames. Composites Part B: Engineering, 275, Article 111307. https://doi.org/10.1016/j.compositesb.2024.111307

Barvenik, K., Coogan, Z., Librandi, G., Pezzulla, M. & Tubaldi, E. (2024). Tactile Sensing and Grasping Through Thin-Shell Buckling. Advanced Intelligent Systems , 6(9), Article 2300855. https://doi.org/10.1002/aisy.202300855

Barettin, D., Madsen, S., Lassen, B. & Willatzen, M. (2011). Comparison of Atomistic and Continuum Quantum-Dot Elastic Models and Implications for Optoelectronic Properties. A I P Conference Proceedings Series, 1399, 445.

Bae, J., Won, J., Kim, T., Choi, S., Kim, H., Oh, S. H. V., Lee, G., Lee, E., Jeon, S., Kim, M., Do, H. W., Seo, D., Kim, S., Cho, Y., Kang, H., Kim, B., Choi, H., Han, J., Kim, T. ... Shim, W. (2024). Cation-eutaxy-enabled III–V-derived van der Waals crystals as memristive semiconductors. Nature Materials, 23(10), 1402-1410. https://doi.org/10.1038/s41563-024-01986-x

Andriollo, T., Kouznetsova, V. & Alessandretti, L. (2022). Network approach for the analysis of the irreversible deformation of solids with soft heterogeneities. Physical Review Materials, 6(11), Article L110601 . https://doi.org/10.1103/PhysRevMaterials.6.L110601

Andriollo, T. (2022). Network science approach to predict the yield strength of metals containing soft particles and pores. I O P Conference Series: Materials Science and Engineering, 1249, Article 012018. https://doi.org/10.1088/1757-899X/1249/1/012018

Anand, M., Panigrahi, S., Kofoed, M. V. W., Aghababaei, R. & Agarwala, S. (2024). Bioinspired poly(vinyl alcohol) films with tunable adhesion and self-healing for biodegradable electronics and beyond. Sustainable Materials and Technologies, 41, Article e01084. https://doi.org/10.1016/j.susmat.2024.e01084

Alstrøm, T. S., Sørensen, M. P., Pedersen, N. F. & Madsen, S. (2011). Magnetic Flux Lines in Complex Geometry Type-II Superconductors Studied by the Time Dependent Ginzburg-Landau Equation. Acta Applicandae Mathematicae, 115, 63-74. https://doi.org/10.1007/s10440-010-9580-8

Alessi, C., Falotico, E. & Lucantonio, A. (2023). Ablation Study of a Dynamic Model for a 3D-Printed Pneumatic Soft Robotic Arm. IEEE Access, 11, 37840-37853. https://doi.org/10.1109/ACCESS.2023.3266282

Alameen, E. H. O., Lucantonio, A. & DeSimone, A. (2023). Mechanics and transient morphing of soft hygroscopic bilayers. Mechanics Research Communications, 131, Article 104131. https://doi.org/10.1016/j.mechrescom.2023.104131

Airao, J., Jain, A., Nirala, C. K. & Unune, D. (2025). Tribological performance in micro-milling of Ti6Al4V under nanofluid-based minimum quantity lubrication. International Journal on Interactive Design and Manufacturing, 19(3), 1807-1819. https://doi.org/10.1007/s12008-024-01856-5

Airao, J., Gupta, A., Nirala, C. K. & Hsue, A. W. J. (2024). Bayesian neural networks modeling for tool wear prediction in milling Al 6061 T6 under MQL conditions. International Journal of Advanced Manufacturing Technology, 135(5-6), 2777-2788. https://doi.org/10.1007/s00170-024-14678-2

Airao, J., Malekan, M., Budzik, M. & Aghababaei, R. (2024). Effect of Friction on Critical Cutting Depth for Ductile-Brittle Transition in Material Removal Mechanism. Journal of Tribology, 146(11), Article 114201 EN. https://doi.org/10.1115/1.4066052

Aghababaei, R., Malekan, M. & Budzik, M. (2021). Cutting Depth Dictates the Transition from Continuous to Segmented Chip Formation. Physical Review Letters, 127(23), Article A202. https://doi.org/10.1103/PhysRevLett.127.235502

Abu Shaid Sujon, M., Andriollo, T. & Islam, A. (2023). Enhancing vibration damping properties of MABS/VDT blends using SEBS‑g‑MAH as a compatibilizer. Journal of Polymer Research, 30, Article 440. https://doi.org/10.1007/s10965-023-03819-y

Displaying results 51 to 100 out of 100

Back to the main page

Revised 19.12.2023

AU Engineering